Bulb reboots randomly and sometimes changes to the default green #69
Comments
|
This is the exact bulb I bought https://a.co/d/6JRLZgg |
|
It just rebooted again while I was closing the issue (with the default green) Device Info:
|
|
What's frustrating is, I bought 2 bulbs at once. One bulb just stopped working entirely out of the blue and this one has this problem. Hopefully the replacement for the completely broken bulb works fine and that it's just a bad batch |
|
it may have been |
|
i think the first two bulbs were just a bad batch. bulb 1 is still misbehaving, but bulb 2's replacement seems fine |
|
looks like disabling |
|
sigh
|
|
in my attempt to debug this in QEMU, i attempted to convert this over from ESP8266 Wi-Fi to ESP32 Ethernet and came up with this cursed config. it fails to compile due to expecting the header file for ESP8266 Wi-Fi # Device Unique Settings (requires either the kauf config linked below or passing the vars ourselves)
substitutions:
name: lexi-kauf-qemu-1
friendly_name: "Lexi's Kauf QEMU 1"
ssid: "Lexi's Kauf QEMU 1 Hotspot"
sub_max_power: '1.0'
#light_restore_mode: ALWAYS_ON
mqtt_prefix: iot/$name
forwarded_address: 192.168.2.122 # Used for port forwarding
# Grab Recommended Kauf Config
# https://github.com/KaufHA/kauf-rgbww-bulbs/blob/main/kauf-bulb.yaml
packages:
Kauf.RGBWW: github://KaufHA/kauf-rgbww-bulbs/kauf-bulb.yaml
# https://esphome.io/components/esp8266.html
esp8266: !remove
# https://github.com/platformio/platformio-docs/blob/develop/boards/espressif32/esp32doit-devkit-v1.rst
# https://esphome.io/components/esp32.html
esp32:
board: esp32doit-devkit-v1
framework:
type: esp-idf
# Installs PR with open_eth driver
external_components:
- source: github://pr#7020
components: [ ethernet ]
# Enable Home Assistant API
api:
encryption:
key: !secret api_encryption_key
# MQTT Server
mqtt:
broker: !secret mqtt_broker
topic_prefix: $mqtt_prefix
reboot_timeout: 0s
username: lexi
password: !secret lexi_mqtt_password
# Set OTA Password
ota:
- platform: esphome
password: !secret ota_password
# Replace Output
# https://esphome.io/components/output/
# https://esphome.io/components/output/esp8266_pwm.html
# https://esphome.io/components/output/ledc.html#esp32-ledc-output
output:
- id: !remove pwm_red
- id: !remove pwm_green
- id: !remove pwm_blue
- id: !remove pwm_cw
- id: !remove pwm_ww
- platform: ledc
pin: $sub_red_pin
frequency: $sub_red_freq
id: pwm_red
max_power: $sub_max_power
- platform: ledc
pin: $sub_green_pin
frequency: $sub_green_freq
id: pwm_green
max_power: $sub_max_power
- platform: ledc
pin: $sub_blue_pin
frequency: $sub_blue_freq
id: pwm_blue
max_power: $sub_max_power
- platform: ledc
pin: $sub_cw_pin
frequency: $sub_cw_freq
id: pwm_cw
max_power: $sub_max_power
- platform: ledc
pin: $sub_ww_pin
frequency: $sub_ww_freq
id: pwm_ww
max_power: $sub_max_power
# https://esphome.io/components/light/index.html
light:
# Additive RGB light for Warm White
- id: !remove warm_rgb
- id: !remove cold_rgb
- id: !remove kauf_light
- platform: kauf_rgbww
id: warm_rgb
entity_category: config
default_transition_length: 0ms
icon: mdi:store-cog
aux: true
name: $friendly_name Warm RGB
forced_hash: 4077116474
# forced_addr: 28
global_addr: global_forced_addr
disabled_by_default: $disable_entities
restore_mode: RESTORE_DEFAULT_OFF
# Additive RGB light for Cold White
- platform: kauf_rgbww
id: cold_rgb
entity_category: config
default_transition_length: 0ms
icon: mdi:store-cog-outline
aux: true
name: $friendly_name Cold RGB
forced_hash: 301094535
# forced_addr: 40
global_addr: global_forced_addr
disabled_by_default: $disable_entities
restore_mode: RESTORE_DEFAULT_OFF
# Main RGBWW light
- platform: kauf_rgbww
id: kauf_light
default_transition_length: $sub_default_transition_length
name: $friendly_name
red: pwm_red
green: pwm_green
blue: pwm_blue
warm_white: pwm_ww
cold_white: pwm_cw
warm_rgb: warm_rgb
cold_rgb: cold_rgb
warm_white_color_temperature: $sub_warm_white_temp
cold_white_color_temperature: $sub_cold_white_temp
forced_hash: 2723974766
# forced_addr: 52
global_addr: global_forced_addr
restore_mode: $light_restore_mode
on_turn_on:
- script.execute: $sub_on_turn_on
on_turn_off:
- script.execute: $sub_on_turn_off
# https://esphome.io/components/select/index.html
# https://esphome.io/components/select/template.html
select:
- id: !remove effect
- platform: template
name: $friendly_name Effect
id: effect
optimistic: true
options:
- "None"
- "WLED / DDP"
initial_option: "None"
restore_value: true
icon: mdi:string-lights
on_value:
- lambda: |-
if ( x == "WLED / DDP" ) { id(kauf_light).set_use_wled(true); }
else { id(kauf_light).set_use_wled(false); }
- script.execute: script_save_changes
entity_category: config
forced_hash: 5841966
# forced_addr: 66
global_addr: global_forced_addr
# Disable Wifi
wifi: !remove
# # Connect to Wifi or Fallback to Hotspot
# wifi:
# ssid: !secret wifi_ssid
# password: !secret wifi_password
# # Enable fallback hotspot (captive portal) in case wifi connection fails
# ap:
# ssid: $ssid
# password: !secret hotspot_fallback_password
# https://github.com/esphome/esphome/pull/7020 (OpenCores Ethernet PR)
# https://esphome.io/components/ethernet.html#ethernet-component
ethernet:
type: OPENETH
use_address: $forwarded_address
# Disable Captive Portal
# https://esphome.io/components/captive_portal.html
captive_portal: !remove
# Disable Quick Boot Script
script:
- id: !remove script_quick_boot
- id: script_quick_boot
then:
lambda: return;
# Component to report useful stats on startup
debug:
# Sensor configured to read text information from the debug component
# https://esphome.io/components/text_sensor/wifi_info.html
text_sensor: !remove
- platform: debug
device:
name: "Device Info"
reset_reason:
name: "Reset Reason"
# Sensor configured to read number information from the debug component
sensor:
- platform: debug
free:
name: "Heap Free"
# fragmentation:
# name: "Heap Fragmentation"
block:
name: "Heap Max Block"
loop_time:
name: "Loop Time"
# psram:
# name: "Free PSRAM"
# Sets logger to debug verbosity (the default)
logger:
level: debug |
|
so, at this point, i just hate these lights. even the replacement for bulb 1 is resetting on me and im just like, why? like it shouldn't be happening this much. these are 3 bulbs out of 4 that have turned out to be bad. only 1 of them has worked properly and they have been running the same ESPHome firmware |
I've been trying to figure out why it keeps resetting and attempting to resolve it. It does seem to happen less often when not using the DDP / WLED effect
this is my ESPHome config
MQTT is locked down so you have to be authenticated to read or write to the topics,
homeassistant/#,esphome/#, andiot/#. the iot topic is where i have my bulb prefixed to with the command topic beingiot/lexi-room-bulb-1/light/lexi_s_room_bulb_1/commandThis is the latest device info from the debug component above
When I still had DDP enabled, it was causing segfaults. I'm currently trying to get QEMU running with ESP8266 (and also will be messing with ESP32, but that's more for wanting to create my own devices in the semi-distant future to do custom things) so I can get a more in depth look as to the cause of the random reboots
The reboots happen anywhere from a few minutes to few hours. This issue has stuck around through multiple builds and changes of the ESPHome config, so it isn't likely to just be a bad build, but something else. Potentially corrupted data outside of the firmware, but I currently have no way to check that
The text was updated successfully, but these errors were encountered: