startup.sh

#!/bin/sh

# template out all the config files using env vars
sed -i 's/right=.*/right='$VPN_SERVER_IPV4'/' /etc/ipsec.conf
echo ': PSK "'$VPN_PSK'"' > /etc/ipsec.secrets
sed -i 's/lns = .*/lns = '$VPN_SERVER_IPV4'/' /etc/xl2tpd/xl2tpd.conf
sed -i 's/name .*/name '$VPN_USERNAME'/' /etc/ppp/options.l2tpd.client
sed -i 's/password .*/password '$VPN_PASSWORD'/' /etc/ppp/options.l2tpd.client

rm -f /var/run/pluto/pluto.pid

# startup ipsec tunnel
ipsec initnss
sleep 1
ipsec pluto --stderrlog --config /etc/ipsec.conf
sleep 5
#ipsec setup start
#sleep 1
#ipsec auto --add L2TP-PSK
#sleep 1
ipsec auto --up L2TP-PSK
sleep 3
ipsec --status
sleep 3

# startup xl2tpd ppp daemon then send it a connect command
(sleep 7 && echo "c myVPN" > /var/run/xl2tpd/l2tp-control) &
# exec /usr/sbin/xl2tpd -p /var/run/xl2tpd.pid -c /etc/xl2tpd/xl2tpd.conf -C /var/run/xl2tpd/l2tp-control -D
(/usr/sbin/xl2tpd -p /var/run/xl2tpd.pid -c /etc/xl2tpd/xl2tpd.conf -C /var/run/xl2tpd/l2tp-control -D) &

# # if [ ! -r "$FILE" ]; then
while ! ifconfig | grep ppp0 -q; do
    sleep 10
    ifconfig | grep ppp0
    echo "ifconfig | grep ppp0 not found"
    # exit 1
done
echo l2tp up

/sbin/ip route add 192.168.0.0/16 dev ppp0
route
/bin/ping -c 3 $VPN_CHECK_IP

# # run while up
exec /test.sh