Interface: S5.1 and S5.2 errors

[antoniovazquezblanco]

KLC Rules:
http://kicad-pcb.org/libraries/klc/S5.1/
http://kicad-pcb.org/libraries/klc/S5.2/

Splitting issue #28 I have found the following violations:

Checking symbol '8237':
  Violating S5.1
    For components with a single default footprint, footprint field is filled with valid footprint
    filename
    Footprint filter 'PDIP*W15.24mm*' does not match the footprint 'Package_DIP:DIP-40_W15.24mm' set for this symbol.
     - could not match 'DIP-40_W15.24mm' against filter 'PDIP*W15.24mm*'
     - could not match 'Package_DIP:DIP-40_W15.24mm' against filter 'PDIP*W15.24mm*'
    Symbol has a footprint defined in the footprint field, but several (2) footprint filters set. If the symbol is for a single default footprint, remove the surplus filters. If the symbol is meant for multiple different footprints, empty the footprint field.
Checking symbol '8255':
  Violating S5.1
    For components with a single default footprint, footprint field is filled with valid footprint
    filename
    Footprint filter 'PDIP*W15.24mm*' does not match the footprint 'Package_DIP:DIP-40_W15.24mm' set for this symbol.
     - could not match 'DIP-40_W15.24mm' against filter 'PDIP*W15.24mm*'
     - could not match 'Package_DIP:DIP-40_W15.24mm' against filter 'PDIP*W15.24mm*'
    Symbol has a footprint defined in the footprint field, but several (2) footprint filters set. If the symbol is for a single default footprint, remove the surplus filters. If the symbol is meant for multiple different footprints, empty the footprint field.
Checking symbol '8288':
  Violating S5.1
    For components with a single default footprint, footprint field is filled with valid footprint
    filename
    Footprint filter 'PDIP*W7.62mm*' does not match the footprint 'Package_DIP:DIP-20_W7.62mm' set for this symbol.
     - could not match 'DIP-20_W7.62mm' against filter 'PDIP*W7.62mm*'
     - could not match 'Package_DIP:DIP-20_W7.62mm' against filter 'PDIP*W7.62mm*'
    Symbol has a footprint defined in the footprint field, but several (2) footprint filters set. If the symbol is for a single default footprint, remove the surplus filters. If the symbol is meant for multiple different footprints, empty the footprint field.