Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

CC2530 + CC2592 | Better coordinator firmwares Z-Stack_Home_1.2 vs Z-Stack_3.0.x #282

Closed
Boia11 opened this issue Apr 10, 2021 · 6 comments

Comments

@Boia11
Copy link

Boia11 commented Apr 10, 2021

The better coordinator firmwares for CC2530 + CC2592 (E-Byte E18-MS1PA1-PCB/IPX) is Z-Stack_Home_1.2 or Z-Stack_3.0.x .

Consideration:

  • I have same device declaired as ZigBee 3.0
  • I see that the router firmware is available only as Z-Stack 1.2 HA
  • Firmware 3.0.x was updates 2 years ago otherwise the firmware 1.2 HA 4 months
Z-Stack Device Zigbee Direct children Routes Notes
Z-Stack_Home_1.2 (default) CC2530, CC2530 + CC2591, CC2530 + CC2592 1.2 HA 16 30/0
Z-Stack_Home_1.2 (source_routing) CC2531, CC2530, CC2530 + CC2591, CC2530 + CC2592 1.2 HA 5 40/40
Z-Stack_3.0.x CC2530, CC2530 + CC2591, CC2530 + CC2592 3.0 10 40/0 - Discussion #1445 - Max 40 Zigbee 3.0 devices

Which is the best for compatibility and security with zigbee2mqtt?

@Koenkk Koenkk closed this as completed Apr 10, 2021
@Boia11
Copy link
Author

Boia11 commented Apr 10, 2021

Check https://github.com/Koenkk/Z-Stack-firmware/tree/master/coordinator#im-using-a-cc2530-or-cc2531-which-firmware-should-i-use

I had read but there is no useful pros and cons to decide...."Zigbee 3.0 firmwares are not recommended for the CC2530 and CC2531 (since those are not powerful enough)" but apart from this detail, nothing else is said, are there any performance problems? coverage range? compatibility?

@Koenkk
Copy link
Owner

Koenkk commented Apr 11, 2021

The 3.0 setup will cover less devices and might crash faster, I've never investigated this properly because TI advices NOT to use 3.0 on the CC2530/CC2531:

@Boia11
Copy link
Author

Boia11 commented Apr 11, 2021

The 3.0 setup will cover less devices and might crash faster, I've never investigated this properly because TI advices NOT to use 3.0 on the CC2530/CC2531:

Okay, thanks. You recommend HA 1.2 default or source_routing version?

@Koenkk
Copy link
Owner

Koenkk commented Apr 11, 2021

Source routing, but make sure you have enough routers because it can handle only 5 direct connections.

@Boia11
Copy link
Author

Boia11 commented Apr 11, 2021

Source routing, but make sure you have enough routers because it can handle only 5 direct connections.

Perfect. Thanks for informations.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants