This LR11xx SDK just contains the ranging example for LR11x0 transceivers.
This SDK is developed on the ST Microeletronic NUCLEO-L476RG development board.
The list of compatible Semtech LR1110 shields is:
| Shield | PCB | Frequency matching | Characteristics |
|---|---|---|---|
| LR1110MB1DIS | E516V02B | 868/915 MHz | GNSS with LNA for Passive GNSS Antenna |
| LR1110MB1DJS | E592V01B | 868/915 MHz | GNSS without LNA |
| LR1110MB1GIS | E516V02B | 490 MHz | GNSS with LNA for Passive GNSS Antenna |
| LR1110MB1GJS | E592V01B | 490 MHz | GNSS without LNA |
The list of compatible Semtech LR1120 shields is:
| Shield | PCB | Frequency matching | Characteristics |
|---|---|---|---|
| LR1120MB1DIS | E655V01A | 868/915 MHz | GNSS with LNA for Passive GNSS Antenna |
| LR1120MB1DJS | E656V01A | 868/915 MHz | GNSS without LNA |
| LR1120MB1GIS | E655V01A | 490 MHz | GNSS with LNA for Passive GNSS Antenna |
| LR1120MB1GJS | E656V01A | 490 MHz | GNSS without LNA |
This SDK requires the transceiver to run the following version:
To update the transceiver with the desired firmware version, please use the updater tool application.
This issue has been fixed in firmware LR1110 0x0308 and LR1120 0x0102 - it was not present in LR1121 0x0101. The associated workaround is disabled in this project starting from v2.1.0.
If one wants to re-enable the workaround, this line has to be commented.