Merge branch 'r8152-fixes'

Hayes Wang says:

====================
r8152: device reset

v3:
For patch foss-for-synopsys-dwc-arc-processors#2, remove cancel_delayed_work().

v2:
For patch foss-for-synopsys-dwc-arc-processors#1, remove usb_autopm_get_interface(), usb_autopm_put_interface(), and
the checking of intf->condition.

For patch foss-for-synopsys-dwc-arc-processors#2, replace the original method with usb_queue_reset_device() to reset
the device.

v1:
Although the driver works normally, we find the device may get all 0xff data when
transmitting packets on certain platforms. It would break the device and no packet
could be transmitted. The reset is necessary to recover the hw for this situation.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Author: davem330

drivers/net/usb/r8152.c

@@ -27,7 +27,7 @@
 #include <linux/usb/cdc.h>
 
 /* Version Information */
-#define DRIVER_VERSION "v1.08.0 (2015/01/13)"
+#define DRIVER_VERSION "v1.08.1 (2015/07/28)"
 #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
 #define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
 #define MODULENAME "r8152"
@@ -1902,11 +1902,10 @@ static void rtl_drop_queued_tx(struct r8152 *tp)
 static void rtl8152_tx_timeout(struct net_device *netdev)
 {
 	struct r8152 *tp = netdev_priv(netdev);
-	int i;
 
 	netif_warn(tp, tx_err, netdev, "Tx timeout\n");
-	for (i = 0; i < RTL8152_MAX_TX; i++)
-		usb_unlink_urb(tp->tx_info[i].urb);
+
+	usb_queue_reset_device(tp->intf);
 }
 
 static void rtl8152_set_rx_mode(struct net_device *netdev)
@@ -3342,6 +3341,58 @@ static void r8153_init(struct r8152 *tp)
 	r8153_u2p3en(tp, true);
 }
 
+static int rtl8152_pre_reset(struct usb_interface *intf)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+	struct net_device *netdev;
+
+	if (!tp)
+		return 0;
+
+	netdev = tp->netdev;
+	if (!netif_running(netdev))
+		return 0;
+
+	napi_disable(&tp->napi);
+	clear_bit(WORK_ENABLE, &tp->flags);
+	usb_kill_urb(tp->intr_urb);
+	cancel_delayed_work_sync(&tp->schedule);
+	if (netif_carrier_ok(netdev)) {
+		netif_stop_queue(netdev);
+		mutex_lock(&tp->control);
+		tp->rtl_ops.disable(tp);
+		mutex_unlock(&tp->control);
+	}
+
+	return 0;
+}
+
+static int rtl8152_post_reset(struct usb_interface *intf)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+	struct net_device *netdev;
+
+	if (!tp)
+		return 0;
+
+	netdev = tp->netdev;
+	if (!netif_running(netdev))
+		return 0;
+
+	set_bit(WORK_ENABLE, &tp->flags);
+	if (netif_carrier_ok(netdev)) {
+		mutex_lock(&tp->control);
+		tp->rtl_ops.enable(tp);
+		rtl8152_set_rx_mode(netdev);
+		mutex_unlock(&tp->control);
+		netif_wake_queue(netdev);
+	}
+
+	napi_enable(&tp->napi);
+
+	return 0;
+}
+
 static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
 {
 	struct r8152 *tp = usb_get_intfdata(intf);
@@ -4164,6 +4215,8 @@ static struct usb_driver rtl8152_driver = {
 	.suspend =	rtl8152_suspend,
 	.resume =	rtl8152_resume,
 	.reset_resume =	rtl8152_resume,
+	.pre_reset =	rtl8152_pre_reset,
+	.post_reset =	rtl8152_post_reset,
 	.supports_autosuspend = 1,
 	.disable_hub_initiated_lpm = 1,
 };