after installing klipper with kiauh: curl gives error curl: error while loading shared libraries: �......�: cannot open shared object file: Error 36

[alber70g]

Creating a bug report/issue

• I have searched the existing open and closed issues

The full error with history

    /=======================================================\
    |     ~~~~~~~~~~~~~~~~~ [ KIAUH ] ~~~~~~~~~~~~~~~~~     |
    |        Klipper Installation And Update Helper         |
    |     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~     |
    \=======================================================/

    ###### Initializing Klipper installation ...

    /=======================================================\
    | Please select your preferred Python version.          |
    | The recommended version is Python 3.x.                |
    |-------------------------------------------------------|
    |  1) [Python 3.x]  (recommended)                       |
    |  2) [Python 2.7]  (legacy)                            |
    |-------------------------------------------------------|
    |                       B) « Back                       |
    \=======================================================/
    ###### Select Python version: 1
      [➔] Python 3.x

    /=======================================================\
    | Please select the number of Klipper instances to set  |
    | up. The number of Klipper instances will determine    |
    | the amount of printers you can run from this host.    |
    |                                                       |
    | WARNING:                                              |
    | Setting up too many instances may crash your system.  |
    |-------------------------------------------------------|
    |                       B) « Back                       |
    \=======================================================/
    ###### Number of Klipper instances to set up: 1
      [➔] Instance count: 1


    ###### Installing single Klipper instance ...

    ###### Checking for the following dependencies:
    ● git
    [✓ OK] Dependencies already met!

    ###### Cloning Klipper from https://github.com/Klipper3d/klipper ...
    Cloning into '/home/dietpi/klipper'...
    error: git-remote-https died of signal 11

    #=======================================================#
    Cloning Klipper from
    https://github.com/Klipper3d/klipper
    failed!
    #=======================================================#

    dietpi@DietPi:~$ shutdown -r now
    -bash: shutdown: command not found
    dietpi@DietPi:~$ sudo shutdown -r now
    Failed to connect to bus: No such file or directory
    Connection to 192.168.1.7 closed by remote host.
    Connection to 192.168.1.7 closed.

    20:36:07 ~ on 𝌋 unraid
    took 52m21s ❯ ssh dietpi@192.168.1.7

    The programs included with the Debian GNU/Linux system are free software;
    the exact distribution terms for each program are described in the
    individual files in /usr/share/doc/*/copyright.

    Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
    permitted by applicable law.
    ─────────────────────────────────────────────────────
    DietPi v9.7.1 : 20:37 - Wed 11/09/24
    ─────────────────────────────────────────────────────
    - Device model : RPi Zero 2 W (aarch64)
    - CPU temp : 41 °C / 105 °F : Optimal temperature
    - LAN IP : 192.168.1.7 (wlan0)
    curl: error while loading shared libraries: ����������������������������������������������������������������������������������������������������������������: cannot open shared object file: Error 36

    [FAILED] DietPi-Update | Unable to get latest version.
    [ INFO ] DietPi-Update | Please check the target Git repository and your network connection, then rerun dietpi-update.
    [ INFO ] DietPi-Update | If this error persists, please report at: https://github.com/MichaIng/DietPi/issues
    [ INFO ] DietPi-Update | APT update, please wait...
    Hit:1 https://deb.debian.org/debian bookworm InRelease
    Hit:2 https://deb.debian.org/debian bookworm-updates InRelease
    Hit:3 https://deb.debian.org/debian-security bookworm-security InRelease
    Hit:4 https://deb.debian.org/debian bookworm-backports InRelease
    Hit:5 https://dietpi.com/apt bookworm InRelease
    Hit:6 https://dietpi.com/apt all InRelease
    Hit:7 https://archive.raspberrypi.com/debian bookworm InRelease
    Reading package lists...
    [  OK  ] DietPi-Update | APT update
    [ INFO ] DietPi-Update | No APT upgrades were found, not creating file: /run/dietpi/.apt_updates
    dietpi@DietPi:~$ echo $G_DISTRO_NAME
    bookworm
    dietpi@DietPi:~$ apt update
    apt -y install --reinstall librtmp1
    Reading package lists... Done
    E: Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied)
    E: Unable to lock directory /var/lib/apt/lists/
    E: Could not open lock file /var/lib/dpkg/lock-frontend - open (13: Permission denied)
    E: Unable to acquire the dpkg frontend lock (/var/lib/dpkg/lock-frontend), are you root?
    dietpi@DietPi:~$ sudo apt -y install --reinstall librtmp1
    Reading package lists... Done
    Building dependency tree... Done
    Reading state information... Done
    0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded.
    Need to get 59.4 kB of archives.
    After this operation, 0 B of additional disk space will be used.
    Get:1 https://deb.debian.org/debian bookworm/main arm64 librtmp1 arm64 2.4+20151223.gitfa8646d.1-2+b2 [59.4 kB]
    Fetched 59.4 kB in 0s (216 kB/s)
    debconf: delaying package configuration, since apt-utils is not installed
    (Reading database ... 24656 files and directories currently installed.)
    Preparing to unpack .../librtmp1_2.4+20151223.gitfa8646d.1-2+b2_arm64.deb ...
    Unpacking librtmp1:arm64 (2.4+20151223.gitfa8646d.1-2+b2) over (2.4+20151223.gitfa8646d.1-2+b2) ...
    Setting up librtmp1:arm64 (2.4+20151223.gitfa8646d.1-2+b2) ...
    Processing triggers for libc-bin (2.36-9+rpt2+deb12u8) ...
    dietpi@DietPi:~$ curl
    ─────────────────────────────────────────────────────

    DietPi Team     : https://github.com/MichaIng/DietPi#the-dietpi-project-team
    Patreon Legends : Chris Gelatt, ADSB.im
    Website         : https://dietpi.com/ | https://twitter.com/DietPi_
    Contribute      : https://dietpi.com/contribute.html
    Web Hosting by  : https://myvirtualserver.com

    dietpi-launcher : All the DietPi programs in one place
    dietpi-config   : Feature rich configuration tool for your device
    dietpi-software : Select optimised software for installation
    htop            : Resource monitor
    cpu             : Shows CPU information and stats

    dietpi@DietPi:~$ cat /boot/dietpi/.version
    G_DIETPI_VERSION_CORE=9
    G_DIETPI_VERSION_SUB=7
    G_DIETPI_VERSION_RC=1
    G_GITBRANCH='master'
    G_GITOWNER='MichaIng'
    dietpi@DietPi:~$ echo $G_DISTRO_NAME $G_RASPBIAN
    bookworm 0
    dietpi@DietPi:~$ uname -a
    Linux DietPi 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr  3 17:24:16 BST 2023 aarch64 GNU/Linux
    dietpi@DietPi:~$ echo $G_HW_MODEL_NAME
    RPi Zero 2 W (aarch64)
    dietpi@DietPi:~$ echo $G_HW_UUID
    d936493e-8b06-4a5c-b29a-2f5ff939ecb0
    dietpi@DietPi:~$

Required Information

• DietPi version | cat /boot/dietpi/.version

  dietpi@DietPi:~$ cat /boot/dietpi/.version
  G_DIETPI_VERSION_CORE=9
  G_DIETPI_VERSION_SUB=7
  G_DIETPI_VERSION_RC=1
  G_GITBRANCH='master'
  G_GITOWNER='MichaIng'
  

• Distro version | echo $G_DISTRO_NAME $G_RASPBIAN

  dietpi@DietPi:~$ echo $G_DISTRO_NAME $G_RASPBIAN
  bookworm 0
  

• Kernel version | uname -a

  dietpi@DietPi:~$ uname -a
  Linux DietPi 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr  3 17:24:16 BST 2023 aarch64 GNU/Linux
  

• SBC model | echo $G_HW_MODEL_NAME or (EG: RPi3)

  dietpi@DietPi:~$ echo $G_HW_MODEL_NAME
  RPi Zero 2 W (aarch64)
  

• Power supply used | (EG: 5V 1A RAVpower)
  Simple 5V 2.5A
• SD card used | (EG: SanDisk ultra)
  HEMA MicroSD HC I 16GB up to 85mb/s

Additional Information (if applicable)

• Software title | (EG: Nextcloud)
  Klipper with github.com/dw-0/kiauh.git
• Was the software title installed freshly or updated/migrated?
  New
• Can this issue be replicated on a fresh installation of DietPi?
  yes, I've installed it twice and two times I had to reinstall the image of DietPi

• Bug report ID | echo $G_HW_UUID
  I tried sending bug report, but it obviously fails now that curl is broken

Steps to reproduce

1. install fresh dietpi on Raspberry Pi Zero 2W
2. install git from the menu
3. clone dw-0/kiauh.git in the dietpi user home dir
4. run ./kiauh/kiauh.sh (use non beta version)
5. select install (1)
6. select klipper (1)
7. select defaults for python and amount
8. go again to install
9. install moonraker

Expected behaviour

• installation and clone etc continues

Actual behaviour

• curl error as described above

Extra details

• ...

[MichaIng]

I am not sure what this klipper installer does, but it looks like either a corrupted curl binary or one of its shared libraries.

Does this work without issues?

curl --version
curl https://dietpi.com/geoip

[alber70g]

No this doesn't work. Both give the error like before. I suppose it does corrupt curl somehow.
I can do some debugging if you want. Let me know what you need to see. For what I know, it's only using apt-get to install stuff nothing special. That shouldn't corrupt any installed software I'd say...

[MichaIng]

Please try to reinstall curl and its library:

sudo apt install --reinstall curl libcurl4
curl --version