Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

f.cam6_3_112.FMTHIST_v0c.ne30.non-ogw-ubcT-effgw0.7_taubgnd2.5.001 #312

Open
cecilehannay opened this issue Jun 24, 2023 · 3 comments
Open
Labels
FMTHIST L93 Vertical grid: L83_BL10

Comments

@cecilehannay
Copy link
Collaborator

cecilehannay commented Jun 24, 2023

Description:
Same as #288 except

taubgnd = 1.25D-3 -> 2.5D-3  

user_nl_cam

Tuning/emissions for this run:

clubb_l_predict_upwp_vpwp=.true. 
clubb_l_mono_flux_lim_um   = .true.  
clubb_l_mono_flux_lim_vm   = .true.  
clubb_c_uu_shr = 0.1
clubb_c7=0.1

dust_emis_fact         = 0.80D0

micro_mg_dcs=0.00025
micro_mg_vtrmi_factor=0.5
microp_aero_wsubi_scale=2.5
seasalt_emis_scale=1.5

use_gw_convect_dp = .true.
use_gw_front =.true.
tau_0_ubc = .true.

effgw_beres_dp = 0.7 

effgw_rdg_beta = 0.5D0
effgw_rdg_beta_max = 0.5D0


ext_frc_specifier              = 'num_a1 -> /glade/p/cesmdata/cseg/inputdata/atm/cam/chem/emis/historical_ne30pg3/emissions-cmip6_num_so4_a1_anthro-ene_vertical_mol_175001-201412_ne30pg3_c20200103.nc', 
         'num_a1 -> /glade/p/cesmdata/cseg/inputdata/atm/cam/chem/emis/historical_ne30pg3/emissions-cmip6_num_a1_so4_contvolcano_vertical_850-5000_ne30pg3_c20200125.nc', 
         'num_a2 -> /glade/p/cesmdata/cseg/inputdata/atm/cam/chem/emis/historical_ne30pg3/emissions-cmip6_num_a2_so4_contvolcano_vertical_850-5000_ne30pg3_c20200125.nc',
         'SO2 -> /glade/p/cesmdata/cseg/inputdata/atm/cam/chem/emis/historical_ne30pg3/emissions-cmip6_SO2_contvolcano_vertical_850-5000_ne30pg3_c20200125.nc',
         'so4_a1 -> /glade/p/cesmdata/cseg/inputdata/atm/cam/chem/emis/historical_ne30pg3/emissions-cmip6_so4_a1_anthro-ene_vertical_mol_175001-201412_ne30pg3_c20200103.nc',
         'so4_a1 -> /glade/p/cesmdata/cseg/inputdata/atm/cam/chem/emis/historical_ne30pg3/emissions-cmip6_so4_a1_contvolcano_vertical_850-5000_ne30pg3_c20200125.nc',
         'so4_a2 -> /glade/p/cesmdata/cseg/inputdata/atm/cam/chem/emis/historical_ne30pg3/emissions-cmip6_so4_a2_contvolcano_vertical_850-5000_ne30pg3_c20200125.nc',
         'bc_a4 -> /glade/p/cesmdata/cseg/inputdata/atm/cam/chem/emis/CMIP6_emissions_1750_2015/emissions-cmip6_bc_a4_aircraft_vertical_1750-2015_0.9x1.25_c20170608.nc',
          'num_a4 -> /glade/p/cesmdata/cseg/inputdata/atm/cam/chem/emis/CMIP6_emissions_1750_2015/emissions-cmip6_num_bc_a4_aircraft_vertical_1750-2015_0.9x1.25_c20170608.nc', 
         'SO2 -> /glade/p/cesmdata/cseg/inputdata/atm/cam/chem/emis/CMIP6_emissions_1750_2015/emissions-cmip6_SO2_aircraft_vertical_1750-2015_0.9x1.25_c20170608.nc' 

taubgnd = 2.5D-3

Output will be:

mfilt		    =       0,       5,     20,      40,      12,       120,      1,   1
nhtfrq              =       0,     -24,    -24,      -3,       0,       -2,      0,  -8760
ndens               =       2,       2,      2,       2,       2,       1,      2,   1
interpolate_output  =  .true.,  .true., .true., .false., .false., .true.,  .true.
interpolate_nlat    =     192,     192,    192,     192,     192,     192,   192
interpolate_nlon    =     288,     288,    288,     288,     288,     288,   288 

empty_htapes = .true.

fincl1 = 'ACTNI', 'ACTNL', 'ACTREI', 'ACTREL', 'AODDUST', 'AODVIS', 'AODVISdn','BURDENBC', 'BURDENDUST', 'BURDENPOM', 'BURDENSEASALT', 
'BURDENSO4', 'BURDENSOA', 'CAPE', 'CCN3', 'CDNUMC', 'CH4', 'CLDHGH', 'CLDICE', 'CLDLIQ', 'CLDLOW', 'CLDMED', 'CLDTOT', 'CLOUD', 'CMFMC_DP', 
'CT_H2O', 'DCQ', 'DQCORE', 'DTCOND', 'DTCORE', 'DTV', 'EVAPPREC', 'EVAPSNOW', 'FCTI', 'FCTL', 'FICE', 'FLDS', 'FLNS', 'FLNSC', 'FLNT', 'FLNTC', 'FLUT', 
'FREQZM', 'FSDS', 'FSDSC', 'FSNS', 'FSNSC', 'FSNT', 'FSNTC', 'FSNTOA', 'ICEFRAC', 'LANDFRAC', 'LHFLX', 'LWCF', 'MPDICE', 'MPDLIQ', 'MPDQ', 'MPDT', 
'OCNFRAC', 'OMEGA', 'OMEGA500', 'PBLH', 'PHIS', 'PINT', 'PMID', 'PRECC', 'PRECL', 'PRECSC', 'PRECSL', 'PRECT', 'PS', 'PSL', 'PTEQ', 'PTTEND', 'Q', 
'QFLX', 'QRL', 'QRS', 'QTGW', 'RCMTEND_CLUBB', 'RELHUM', 'RVMTEND_CLUBB', 'SHFLX', 'SOLIN', 'SST', 'STEND_CLUBB', 'SWCF', 
'T', 'TAUX', 'TAUY', 'TFIX', 'TGCLDIWP', 'TGCLDLWP', 'TMQ', 'TREFHT', 'TS', 'TTGW', 'U', 'U10', 'UBOT', 'UTGWORO', 'UTGW_TOTAL', 
'V', 'VBOT', 'VTGWORO', 'VTGW_TOTAL', 'WPRTP_CLUBB', 'WPTHLP_CLUBB', 'Z3', 'ZMDQ', 'ZMDT', 'N2O', 'CO2','CFC11','CFC12', 
'CLD_MISR','FISCCP1_COSP','CLD_CAL','CLD_MISR','CLDTOT_CAL','CLDHGH_CAL', 'CLDMED_CAL','CLDLOW_CAL','CLMODIS', 'AODVISdn',
'CCN3', 'CDNUMC','OMEGA500'


fincl2 = 'PS','PMID','U','V','T','Q'

fincl3 = 'PRECT', 'PRECC', 'FLUT', 'U850', 'U200', 'V850', 'V200', 'OMEGA', 'PSL',  'TS','PS'

fincl4 =  'PRECC','PRECL'

fincl5 = 'Uzm','Vzm','Wzm','THzm', 'VTHzm','WTHzm','UVzm','UWzm'

fincl6 = 'Uzm','Vzm','Wzm','THzm', 'VTHzm','WTHzm','UVzm','UWzm'

phys_grid_ctem_nfreq=-6
phys_grid_ctem_zm_nbas=120
phys_grid_ctem_za_nlat=90

fincl7= 'AQSO4_H2O2','AQSO4_O3', 'bc_a1', 'bc_a4', 'dst_a1', 'dst_a2', 'dst_a3', 'ncl_a1',
'ncl_a1', 'ncl_a2', 'ncl_a3', 'pom_a1', 'pom_a4', 'so4_a1', 'so4_a2', 'so4_a3',
'soa_a1', 'num_a1', 'num_a2', 'num_a3', 'num_a4',
'bc_a1SFWET', 'bc_a4SFWET', 'dst_a1SFWET', 'dst_a2SFWET', 'dst_a3SFWET', 'ncl_a1SFWET',
'ncl_a2SFWET', 'ncl_a3SFWET', 'pom_a1SFWET', 'pom_a4SFWET', 'so4_a1SFWET', 'so4_a2SFWET', 'so4_a3SFWET', 'soa_a1SFWET',
'soa_a2SFWET', 'bc_c1SFWET', 'bc_c4SFWET', 'dst_c1SFWET', 'dst_c2SFWET', 'dst_c3SFWET', 'ncl_c1SFWET', 'ncl_c2SFWET',
'ncl_c3SFWET', 'pom_c1SFWET', 'pom_c4SFWET', 'so4_c1SFWET', 'so4_c2SFWET', 'so4_c3SFWET', 'soa_c1SFWET', 'soa_c2SFWET',
'bc_a1DDF', 'bc_a4DDF', 'dst_a1DDF', 'dst_a2DDF', 'dst_a3DDF', 'ncl_a1DDF', 'ncl_a2DDF', 'ncl_a3DDF',
'pom_a1DDF', 'pom_a4DDF', 'so4_a1DDF', 'so4_a2DDF', 'so4_a3DDF', 'soa_a1DDF', 'soa_a2DDF',
'so4_a1_CLXF', 'so4_a2_CLXF', 'SFbc_a4', 'SFpom_a4', 'SFso4_a1', 'SFso4_a2',
'so4_a1_sfgaex1', 'so4_a2_sfgaex1', 'so4_a3_sfgaex1', 'soa_a1_sfgaex1', 'soa_a2_sfgaex1',
'SFdst_a1','SFdst_a2', 'SFdst_a3', 'SFncl_a1', 'SFncl_a2', 'SFncl_a3',
'num_a2_sfnnuc1', 'SFSO2', 'OCN_FLUX_DMS', 'SAD_SULFC', 'SAD_TROP', 'SAD_AERO'

user_nl_clm

use_init_interp = .true.
check_finidat_year_consistency = .false.
fsurdat = '/glade/work/slevis/git/mksurfdata_toolchain/tools/mksurfdata_esmf/surfdata_ne30np4.pg3_SSP5-8.5_78pfts_CMIP6_1850-2100_c230227.nc'
flanduse_timeseries = '/glade/work/slevis/git/mksurfdata_toolchain/tools/mksurfdata_esmf/landuse.timeseries_ne30np4.pg3_SSP5-8.5_78_CMIP6_1850-2100_c230227.nc'

Case directory:
Locally (if still available):
/glade/p/cesmdata/cseg/runs/cesm2_0/f.cam6_3_112.FMTHIST_v0c.ne30.non-ogw-ubcT-effgw0.7_taubgnd2.5.001

On github:
https://github.com/NCAR/amwg_dev/tree/f.cam6_3_112.FMTHIST_v0c.ne30.non-ogw-ubcT-effgw0.7_taubgnd2.5.001

Source Mods
HB scheme:

/glade/u/home/pel/src/for-hb-nohack-cam6_3_110/vertical_diffusion.F90
/glade/u/home/pel/src/for-hb-nohack-cam6_3_110/clubb_intr.F90

CLM mods

/glade/u/home/oleson/run_hist_1850_files/SPINUP/casefiles_cecile/SourceMods/ctsm5.1.dev120/src.clm/

Sandbox:
Locally (if still available):
/glade/work/hannay/cesm_tags/cam6_3_112

On github:
(https://github.com/ESCOMP/CAM/tree/cam6_3_112)

Diagnostics:
ADF diags (if available)
https://webext.cgd.ucar.edu/FMTHIST/f.cam6_3_112.FMTHIST_v0c.ne30.non-ogw-ubcT-effgw0.7_taubgnd2.5.001/atm/

Contacts:
@tilmes, @JulioTBacmeister, @dan80, @PeterHjortLauritzen 0

@cecilehannay
Copy link
Collaborator Author

I am getting an error in the COSP simulator with that run:

1349: cosp_simulator: ERROR: ERROR: COSP input variable: cospIN%g_vol_cloudsat contai
1349: ns values out of range
1349: ERROR: cospsimulator_intr_run: error return from cosp_simulator

@brianpm mentioned that there was an error with cosp. I wonder if we should just turn it off for now.

@brianpm
Copy link

brianpm commented Jun 25, 2023

In recent runs several of the simulators are producing no data. I haven't diagnosed what is going on. This looks like it is probably different. Maybe as a first step, set cosp_lite = .true. in the namelist. That should turn off the CloudSat simulator. If that doesn't work for whatever reason, then turn off COSP until we can figure out what is happening with the COSP outputs.

@justin-richling
Copy link

ADF diags

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
FMTHIST L93 Vertical grid: L83_BL10
Projects
None yet
Development

No branches or pull requests

3 participants