f.e21.FWscHIST.ne30_L48_BL10_cam6_3_041_kzz3_zmtop75.hf.001

[cecilehannay]

Description:
Identical to #60, but with the top of where diffusion is applied lowered to 75hPa.

We omit the age of air tracers to reduce unnecessary tracers in this run but invoking:

./xmlchange CAM_CONFIG_OPTS='-phys cam_dev -nlev 58 -chem waccm_sc_mam4'

Use new trimmed output

ncdata = '/glade/p/cesm/amwg_dev/juliob/cam_ic_files/se_dycore/FWsc_ne30pg3_58L_GRID_48_taperstart10km_lowtop_BL10_v3_beta1p75_Top_43km.nc'

mfilt           = 0,5,20,40,120,240,365,73,365
nhtfrq         =                  0, -24,  -6,  -3,  -1,   1, -24,-24
fexcl1 = ' '  

empty_htapes = .true.


fincl1 = 'T', 'Q', 'PS', 'PSL', 'U', 'V', 'Z3', 'OMEGA', 'CLOUD', 'QRL', 'QRS', 
'ZMDT', 'ZMDQ', 'RVMTEND_CLUBB', 'STEND_CLUBB', 'FSNT', 'FLNT', 'FLUT','FLNS', 
'FSNS', 'FSNSC','FSNTC','FLNSC', 'FLNTC','FSDS','FSDSC'
'OMEGA500', 'PRECT', 'PRECL', 'PRECSC', 'PRECSL', 
'LWCF', 'SWCF','LHFLX','SHFLX','TGCLDLWP' ,'TGCLDIWP',
'DQCORE','PTEQ','DCQ','QTGW','CT_H2O','MPDQ','EVAPPREC','EVAPSNOW','DTCORE',
'TFIX','PTTEND','DTCOND','DTV','TTGW','MPDT','RCMTEND_CLUBB', 'MPDLIQ','MPDICE',
'PMID','PINT','WPTHLP_CLUBB','WPRTP_CLUBB','CLDLIQ','CLDICE',
'TAUX','TAUY','U10','TREFHT', 'CH4',
'CLDTOT','CLDLOW','CLDMED','CLDHGH','CMFMC_DP','FREQZM'

fincl2 = 'TROP_T', 'TROP_P', 'Q','T','U', 'V', 'OMEGA', 'QRS', 'QRL','PS', 'Z3','PMID'

fincl3 = 'U:I', 'V:I', 'T:I', 'OMEGA:I', 'PS:I', 'PMID','Q','PRECC','PRECL'

interpolate_output = .true.,.true.,.true.,.true.
interpolate_nlat = 192,192,192,192
interpolate_nlon = 288,288,288,288

se_rsplit            = 3
se_nsplit           = 2
se_hypervis_subcycle =  4

SourceMods for nuclopt w/ 75hPa top

/glade/p/cesmdata/cseg/runs/cesm2_0/f.e21.FWscHIST.ne30_L48_BL10_cam6_3_041_kzz3_zmtop75.hf.001/SourceMods/src.cam/

Case directory:
Locally (if still available):
/glade/p/cesmdata/cseg/runs/cesm2_0/f.e21.FWscHIST.ne30_L48_BL10_cam6_3_041_kzz3_zmtop75.hf.001

On github:
https://github.com/NCAR/amwg_dev/tree/f.e21.FWscHIST.ne30_L48_BL10_cam6_3_041_kzz3_zmtop75.hf.001

Sandbox:
Locally (if still available):
/glade/work/hannay/cesm_tags/cam6_3_041

On github:
https://github.com/ESCOMP/CAM/tree/cam6_3_041
hash: 963ebdc

Diagnostics:
AMWG diags (if available)
https://webext.cgd.ucar.edu/FWscHIST/f.e21.FWscHIST.ne30_L48_BL10_cam6_3_041_kzz3_zmtop75.hf.001/atm/

Contacts:
@JulioTBacmeister
@adamrher
@cecilehannay

[adamrher]

@JulioTBacmeister I'll have plot these myself since set4 isn't working for vs. obs case like it is in the zmtop50 run.

[adamrher]

Here's some plots. Yes the T anomaly does move down to 75hPa in this run, so it follow the upper-boundary (note that I mistakingly set kzz=1 in this run).

So we should consider a dynamic upper-boundary ...

[cecilehannay]

Reduced output

This run used reduced output as discussed at: #70
and in the googledocs

googledocs is a living document and this run used the fincl as of Feb11.

We were still missing a few variables to be able to run the tables in the AMWG. The missing variables were: QFLX, PRECC, FSNTOA
I set these to zero as a hack in the climos so I can output the table in the AMWG. Be aware of this. (Precip are not zero in this run. It was just than we didn't output them).

I will add these in the next run.

AMWG diags:

https://webext.cgd.ucar.edu/FWscHIST/f.e21.FWscHIST.ne30_L48_BL10_cam6_3_041_kzz3_zmtop75.hf.001/atm/