Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Real time monitoring: more info about connectivities #890

Closed
andre8244 opened this issue Nov 7, 2024 · 2 comments
Closed

Real time monitoring: more info about connectivities #890

andre8244 opened this issue Nov 7, 2024 · 2 comments
Assignees
@mamengoni @francio87
Labels
verified All test cases were verified successfully
Milestone
NethSecurity 8.4

Comments

@andre8244
Copy link
Collaborator

andre8244 commented Nov 7, 2024 •
edited
Loading

Inside the connectivity section, the list of active WANs should include also the following info:

  • Public IP
  • QoS status and assigned bandwidths (if enabled)
@andre8244 andre8244 self-assigned this Nov 7, 2024
@andre8244 andre8244 converted this from a draft issue Nov 7, 2024
@andre8244 andre8244 added this to the NethSecurity 8.4 milestone Nov 7, 2024
This was referenced Nov 12, 2024
Merged
Merged
@andre8244
Copy link
Collaborator Author

andre8244 commented Nov 13, 2024 •
edited
Loading

Testing version

23.05.5-ns.1.3.0-49-g597f6078

Test case 1

  • Go to Network > Interfaces and devices and configure a single WAN interface
  • Go to Monitoring > Real time monitor > Connectivity
  • Verify that the public WAN IP address is shown inside WANs table
  • Go to Network > Interfaces and devices and apply a different configuration to WAN interface (e.g. IPv4 vs IPv6, DHCP vs Static address)
  • Go to Monitoring > Real time monitor > Connectivity
  • Verify that the public WAN IP address is shown inside WANs table

Test case 2

  • Go to Network > Interfaces and devices and configure multiwan
  • Go to Monitoring > Real time monitor > Connectivity
  • Verify that the correct IP address of every wan configured is shown inside WANs table

Test case 3

  • Configure one or more WAN interface inside Network > Interfaces and devices
  • Go to Network > QoS
  • Enable quality of service for a WAN interface
  • Go to Monitoring > Real time monitor > Connectivity
  • Verify that QoS bandwiths are shown inside WANs table

@andre8244 andre8244 removed their assignment Nov 13, 2024
@andre8244 andre8244 added the testing Packages are available from testing repositories label Nov 13, 2024
@andre8244 andre8244 moved this from In Progress 🛠 to Testing in NethSecurity Nov 13, 2024
This was referenced Nov 19, 2024
Merged
Merged
Merged
@gsanchietti gsanchietti moved this from Testing to In Progress 🛠 in NethSecurity Nov 20, 2024
@gsanchietti gsanchietti removed the testing Packages are available from testing repositories label Nov 20, 2024
@andre8244
Copy link
Collaborator Author

Updated testing image: 23.05.5-ns.1.3.0-49-g597f6078

@andre8244 andre8244 added the testing Packages are available from testing repositories label Nov 20, 2024
@nethbot nethbot moved this from In Progress 🛠 to Testing in NethSecurity Nov 20, 2024
@gsanchietti gsanchietti added verified All test cases were verified successfully and removed testing Packages are available from testing repositories labels Nov 21, 2024
@nethbot nethbot moved this from Testing to Verified in NethSecurity Nov 21, 2024
@github-project-automation github-project-automation bot moved this from Verified to Done ✅ in NethSecurity Nov 21, 2024
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@mamengoni mamengoni

@francio87 francio87

Labels
verified All test cases were verified successfully
Projects
NethSecurity
Archived in project
Milestone
NethSecurity 8.4
Development

No branches or pull requests
4 participants
@gsanchietti @andre8244 @mamengoni @francio87