Skip to content

Latest commit

 

History

History
113 lines (71 loc) · 3.01 KB

readme.md

File metadata and controls

113 lines (71 loc) · 3.01 KB

Optimized Raspberry Pi RF24 and RF24 Network Libraries

General Documentation: http://tmrh20.github.io

Library functions are mostly the same.
See the included examples for RPi specific usage

Raspberry Pi - PreConfig

Possible pre-configuration:

If SPI is not already enabled, load it on boot:

sudo raspi-config  

A. Update the tool via the menu as required
B. Select Advanced and enable the SPI kernel module
C. Update other software and libraries:

 sudo apt-get update  
 sudo apt-get upgrade  

RPi - RF24 Quick-Start

A. Make a directory to contain the RF24 and possibly RF24Network lib and enter it:

mkdir ~/rf24libs  
cd ~/rf24libs  

B. Clone the RF24 Repo

git clone https://github.com/tmrh20/RF24.git rtemp  

C. Copy the RPi library folder to the current directory, and delete the rest

mv rtemp/RPi/RF24 ./  
rm -r rtemp  
cd RF24  

D. Build the library, and run an example file:

sudo make install
cd examples  
make
sudo ./gettingstarted  

RPi - RF24Network Quick-Start

A. Enter the same directory that contains the RF24 library folder

cd ~/rf24libs  

B. Clone the RF24Network Repo

git clone https://github.com/tmrh20/RF24Network.git ntemp  

C. Copy the RF24Network folder to the current directory, and delete the rest

mv ntemp/RPi/RF24Network ./  
rm -r ntemp  
cd RF24Network  

D. Build the library

sudo make install
cd examples  
make  
sudo ./helloworld_rx   OR   sudo ./helloworld_tx  

Connection Info

Using pin 15/GPIO 22 for CE, pin 24/GPIO8 (CE0) for CSN

Can use either RPi CE0 or CE1 pins for radio CSN. Choose any RPi output pin for radio CE pin.

Constructor:

RF24 radio(RPI_V2_GPIO_P1_15,BCM2835_SPI_CS0, BCM2835_SPI_SPEED_8MHZ);
or
RF24 radio(RPI_V2_GPIO_P1_15,BCM2835_SPI_CS1, BCM2835_SPI_SPEED_8MHZ);

Pins:

NRF24L01 RPI P1 Connector
VCC rpi-3v3 (17)
GND rpi-gnd (25)
CE rpi-gpio22 (15)
CSN rpi-gpio8 (24)
SCK rpi-sckl (23)
MOSI rpi-mosi (19)
MISO rpi-miso (21)

See http://www.airspayce.com/mikem/bcm2835/index.html for BCM2835 class documentation.
Note: The BCM library has been customized slightly to allow use of hardware CE pins not in use for SPI, and to include a millis() function.


Based on the arduino lib from J. Coliz maniacbug@ymail.com.
the library was berryfied by Purinda Gunasekara purinda@gmail.com.
then forked from github stanleyseow/RF24 to https://github.com/jscrane/RF24-rpi
Network lib also based on https://github.com/farconada/RF24Network

Currently optimized and aligned with Arduino fork of libraries by TMRh20:
https://github.com/tmrh20/RF24/RPi and https://github.com/tmrh20/RF24Network/RPi
Documentation: http://tmrh20.github.io