platformio.ini

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;

; ================================================
; See docs for configuration options and examples:
; https://docs.slimevr.dev/firmware/configuring-project.html#1-configuring-platformioini
; ================================================

[env]
lib_deps=
  https://github.com/SlimeVR/CmdParser.git
monitor_speed = 115200
monitor_echo = yes
monitor_filters = colorize
;monitor_rts = 0
;monitor_dtr = 0
framework = arduino
build_flags =
;If you want to set hardcoded WiFi SSID and password, uncomment and edit the lines below
;To uncomment, only remove ";" and leave the two spaces in front of the tags
; '" - quotes are necessary!
;  -DWIFI_CREDS_SSID='"SSID"'
;  -DWIFI_CREDS_PASSWD='"PASSWORD"'

;If you want to set a static IP address, uncomment and edit the lines below
;  -DWIFI_USE_STATICIP
;  -DWIFI_STATIC_IP=192,168,XXX,XXX
;  -DWIFI_STATIC_GATEWAY=192,168,XXX,XXX
;  -DWIFI_STATIC_SUBNET=255,255,255,0

; Enable -O2 GCC optimization
  -O2
  -std=gnu++17

build_unflags = -Os -std=gnu++11

; If you want to enable OTA Updates, uncomment and set OTA password here and in credentials.h
; You can set upload_port to device's ip after it's set up for the first time
; Use the same password in SlimeVR Server to let it OTA Update the device
;upload_protocol = espota
;upload_port = 192.168.1.49
;upload_flags =
;  --auth=SlimeVR-OTA

; Settings for different boards

[env:esp12e]
platform = espressif8266
board = esp12e
; Comment out this line below if you have any trouble uploading the firmware
; and if it has a CP2102 on it (a square chip next to the usb port): change to 3000000 (3 million) for even faster upload speed
upload_speed = 921600

; Uncomment below if you want to build for ESP-01
;[env:esp01_1m]
;platform = espressif8266
;board = esp01_1m

; Uncomment below if you want to build for esp32
; Check your board name at https://docs.platformio.org/en/latest/platforms/espressif32.html#boards
; [env:esp32]
; platform = espressif32 @ 5.1.1
; board = esp32dev
; Comment out this line below if you have any trouble uploading the firmware - and if it has a CP2102 on it (a square chip next to the usb port): change to 3000000 (3 million) for even faster upload speed
;upload_speed = 921600

; If you want to use a ESP32C3, you can use this (experimental)
; Check your board name at https://docs.platformio.org/en/latest/platforms/espressif32.html#boards
; There are 2 main Boardtypes:
; 1. Boards that use a USB 2 Serial Chipset ( esp32-c3-devkitm-1, ttgo-t-oi-plus )
; 2. Boards that relay on the USB interface of the ESP32C3 ( lolin_c3_mini , dfrobot_beetle_esp32c3)
;    On this board there are 2 type some of them need to have set the build flag (menuconfig)
;    -DARDUINO_USB_MODE=1
;    -DARDUINO_USB_CDC_ON_BOOT=1

;[env:esp32c3]
;platform = espressif32 @ 5.1.1
;build_flags = 
;  ${env.build_flags}
;  -DESP32C3
;board = lolin_c3_mini