Skip to content

Latest commit

 

History

History
18 lines (12 loc) · 958 Bytes

README.md

File metadata and controls

18 lines (12 loc) · 958 Bytes
Raw

This is a simple OPC UA client hooked up to an MQTT client. It demonstrates how you might write a bridging app that subscribes to variables from an OPC server and publishes them to an MQTT broker.

To run the sample:

  1. Run either simple-server or 3rd-party/node-opcua/server.js in one console
  2. Run mqtt-client in another

This will subscribe to some nodes on the server and publish them to a MQTT broker, (default broker.hivemq.com:1883).

e.g. when node "ns=2;s=v1" changes, it publishes it's value to the "opcua-rust/mqtt-client/2/v1" topic on the server.

You can observe happening by running another MQTT client that subscribes to this same topic. The easiest way is this:

  1. Open http://www.hivemq.com/demos/websocket-client/
  2. Click "Connect" to the broker with the pre-filled values
  3. Click "Add New Topic Subscription", enter "opcua-rust/mqtt-client/#" as the topic and click "Subscribe"
  4. You should see messages arrive that were published