stm324x9i_eval.c

/**
  ******************************************************************************
  * @file    stm324x9i_eval.c
  * @author  MCD Application Team
  * @brief   This file provides a set of firmware functions to manage LEDs, 
  *          push-buttons and COM ports available on STM324x9I-EVAL evaluation 
  *          board(MB1045) RevB from STMicroelectronics.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2017 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
  
/* File Info: ------------------------------------------------------------------
                                   User NOTE

   This driver requires the stm324x9i_eval_io to manage the joystick

------------------------------------------------------------------------------*/

/* Includes ------------------------------------------------------------------*/
#include "stm324x9i_eval.h"
#include "stm324x9i_eval_io.h"

/** @defgroup BSP BSP
  * @{
  */ 

/** @defgroup STM324x9I_EVAL STM324x9I EVAL
  * @{
  */

/** @defgroup STM324x9I_EVAL_LOW_LEVEL STM324x9I EVAL LOW LEVEL
  * @{
  */

/** @defgroup STM324x9I_EVAL_LOW_LEVEL_Private_Defines STM324x9I EVAL LOW LEVEL Private Defines
  * @{
  */
/**
 * @brief STM324x9I EVAL BSP Driver version number V3.0.3
   */
#define __STM324x9I_EVAL_BSP_VERSION_MAIN   (0x03) /*!< [31:24] main version */
#define __STM324x9I_EVAL_BSP_VERSION_SUB1   (0x00) /*!< [23:16] sub1 version */
#define __STM324x9I_EVAL_BSP_VERSION_SUB2   (0x03) /*!< [15:8]  sub2 version */
#define __STM324x9I_EVAL_BSP_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
#define __STM324x9I_EVAL_BSP_VERSION         ((__STM324x9I_EVAL_BSP_VERSION_MAIN << 24)\
                                             |(__STM324x9I_EVAL_BSP_VERSION_SUB1 << 16)\
                                             |(__STM324x9I_EVAL_BSP_VERSION_SUB2 << 8 )\
                                             |(__STM324x9I_EVAL_BSP_VERSION_RC))
/**
  * @}
  */

/** @defgroup STM324x9I_EVAL_LOW_LEVEL_Private_Variables STM324x9I EVAL LOW LEVEL Private Variables
  * @{
  */
GPIO_TypeDef* GPIO_PORT[LEDn] = {LED1_GPIO_PORT,
                                 LED2_GPIO_PORT,
                                 LED3_GPIO_PORT,
                                 LED4_GPIO_PORT};

const uint16_t GPIO_PIN[LEDn] = {LED1_PIN,
                                 LED2_PIN,
                                 LED3_PIN,
                                 LED4_PIN};

GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {WAKEUP_BUTTON_GPIO_PORT,
                                      TAMPER_BUTTON_GPIO_PORT,
                                      KEY_BUTTON_GPIO_PORT};

const uint16_t BUTTON_PIN[BUTTONn] = {WAKEUP_BUTTON_PIN,
                                      TAMPER_BUTTON_PIN,
                                      KEY_BUTTON_PIN};

const uint16_t BUTTON_IRQn[BUTTONn] = {WAKEUP_BUTTON_EXTI_IRQn,
                                       TAMPER_BUTTON_EXTI_IRQn,
                                       KEY_BUTTON_EXTI_IRQn};

USART_TypeDef* COM_USART[COMn] = {EVAL_COM1};

GPIO_TypeDef* COM_TX_PORT[COMn] = {EVAL_COM1_TX_GPIO_PORT};

GPIO_TypeDef* COM_RX_PORT[COMn] = {EVAL_COM1_RX_GPIO_PORT};

const uint16_t COM_TX_PIN[COMn] = {EVAL_COM1_TX_PIN};

const uint16_t COM_RX_PIN[COMn] = {EVAL_COM1_RX_PIN};

const uint16_t COM_TX_AF[COMn] = {EVAL_COM1_TX_AF};

const uint16_t COM_RX_AF[COMn] = {EVAL_COM1_RX_AF};

static I2C_HandleTypeDef heval_I2c;

/**
  * @}
  */

/** @defgroup STM324x9I_EVAL_LOW_LEVEL_Private_FunctionPrototypes STM324x9I EVAL LOW LEVEL Private FunctionPrototypes
  * @{
  */
static void     I2Cx_MspInit(void);
static void     I2Cx_Init(void);
static void     I2Cx_ITConfig(void);
static void     I2Cx_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
static uint8_t  I2Cx_Read(uint8_t Addr, uint8_t Reg);
static HAL_StatusTypeDef I2Cx_ReadMultiple(uint8_t Addr, uint16_t Reg, uint16_t MemAddSize, uint8_t *Buffer, uint16_t Length);
static HAL_StatusTypeDef I2Cx_WriteMultiple(uint8_t Addr, uint16_t Reg, uint16_t MemAddSize, uint8_t *Buffer, uint16_t Length);
static HAL_StatusTypeDef I2Cx_IsDeviceReady(uint16_t DevAddress, uint32_t Trials);
static void     I2Cx_Error(uint8_t Addr);

/* IOExpander IO functions */
void            IOE_Init(void);
void            IOE_ITConfig(void);
void            IOE_Delay(uint32_t Delay);
void            IOE_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
uint8_t         IOE_Read(uint8_t Addr, uint8_t Reg);
uint16_t        IOE_ReadMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length);
void            IOE_WriteMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length);

/* AUDIO IO functions */
void            AUDIO_IO_Init(void);
void            AUDIO_IO_DeInit(void);
void            AUDIO_IO_Write(uint8_t Addr, uint16_t Reg, uint16_t Value);
uint16_t        AUDIO_IO_Read(uint8_t Addr, uint16_t Reg);
void            AUDIO_IO_Delay(uint32_t Delay);

/* CAMERA IO functions */
void            CAMERA_IO_Init(void);
void            CAMERA_Delay(uint32_t Delay);
void            CAMERA_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
uint8_t         CAMERA_IO_Read(uint8_t Addr, uint8_t Reg);

/* I2C EEPROM IO function */
void                EEPROM_IO_Init(void);
HAL_StatusTypeDef   EEPROM_IO_WriteData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
HAL_StatusTypeDef   EEPROM_IO_ReadData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
HAL_StatusTypeDef   EEPROM_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials);
/**
  * @}
  */

/** @defgroup STM324x9I_EVAL_LOW_LEVEL_Private_Functions STM324x9I EVAL LOW LEVEL Private Functions
  * @{
  */ 

  /**
  * @brief  This method returns the STM324x9I EVAL BSP Driver revision
  * @retval version: 0xXYZR (8bits for each decimal, R for RC)
  */
uint32_t BSP_GetVersion(void)
{
  return __STM324x9I_EVAL_BSP_VERSION;
}

/**
  * @brief  Configures LED GPIO.
  * @param  Led: LED to be configured. 
  *          This parameter can be one of the following values:
  *            @arg  LED1
  *            @arg  LED2
  *            @arg  LED3
  *            @arg  LED4
  */
void BSP_LED_Init(Led_TypeDef Led)
{
  GPIO_InitTypeDef  GPIO_InitStruct;

  /* Enable the GPIO_LED clock */
  LEDx_GPIO_CLK_ENABLE(Led);

  /* Configure the GPIO_LED pin */
  GPIO_InitStruct.Pin = GPIO_PIN[Led];
  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
  GPIO_InitStruct.Pull = GPIO_PULLUP;
  GPIO_InitStruct.Speed = GPIO_SPEED_FAST;

  HAL_GPIO_Init(GPIO_PORT[Led], &GPIO_InitStruct);

  HAL_GPIO_WritePin(GPIO_PORT[Led], GPIO_PIN[Led], GPIO_PIN_SET);
}

/**
  * @brief  Turns selected LED On.
  * @param  Led: LED to be set on 
  *          This parameter can be one of the following values:
  *            @arg  LED1
  *            @arg  LED2
  *            @arg  LED3
  *            @arg  LED4
  */
void BSP_LED_On(Led_TypeDef Led)
{
  HAL_GPIO_WritePin(GPIO_PORT[Led], GPIO_PIN[Led], GPIO_PIN_RESET);
}

/**
  * @brief  Turns selected LED Off. 
  * @param  Led: LED to be set off
  *          This parameter can be one of the following values:
  *            @arg  LED1
  *            @arg  LED2
  *            @arg  LED3
  *            @arg  LED4
  */
void BSP_LED_Off(Led_TypeDef Led)
{
  HAL_GPIO_WritePin(GPIO_PORT[Led], GPIO_PIN[Led], GPIO_PIN_SET); 
}

/**
  * @brief  Toggles the selected LED.
  * @param  Led: LED to be toggled
  *          This parameter can be one of the following values:
  *            @arg  LED1
  *            @arg  LED2
  *            @arg  LED3
  *            @arg  LED4
  */
void BSP_LED_Toggle(Led_TypeDef Led)
{
  HAL_GPIO_TogglePin(GPIO_PORT[Led], GPIO_PIN[Led]);
}

/**
  * @brief  Configures button GPIO and EXTI Line.
  * @param  Button: Button to be configured
  *          This parameter can be one of the following values:
  *            @arg  BUTTON_WAKEUP: Wakeup Push Button 
  *            @arg  BUTTON_TAMPER: Tamper Push Button  
  * @param  Button_Mode: Button mode
  *          This parameter can be one of the following values:
  *            @arg  BUTTON_MODE_GPIO: Button will be used as simple IO
  *            @arg  BUTTON_MODE_EXTI: Button will be connected to EXTI line 
  *                                    with interrupt generation capability  
  */
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode)
{
  GPIO_InitTypeDef GPIO_InitStruct;
  
  /* Enable the BUTTON clock */
  BUTTONx_GPIO_CLK_ENABLE(Button);
  
  if(Button_Mode == BUTTON_MODE_GPIO)
  {
    /* Configure Button pin as input */
    GPIO_InitStruct.Pin = BUTTON_PIN[Button];
    GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
    HAL_GPIO_Init(BUTTON_PORT[Button], &GPIO_InitStruct);
  }
  
  if(Button_Mode == BUTTON_MODE_EXTI)
  {
    /* Configure Button pin as input with External interrupt */
    GPIO_InitStruct.Pin = BUTTON_PIN[Button];
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
    
    if(Button != BUTTON_WAKEUP)
    {
      GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING; 
    }
    else
    {
      GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
    }
    
    HAL_GPIO_Init(BUTTON_PORT[Button], &GPIO_InitStruct);
    
    /* Enable and set Button EXTI Interrupt to the lowest priority */
    HAL_NVIC_SetPriority((IRQn_Type)(BUTTON_IRQn[Button]), 0x0F, 0x00);
    HAL_NVIC_EnableIRQ((IRQn_Type)(BUTTON_IRQn[Button]));
  }
}

/**
  * @brief  Returns the selected button state.
  * @param  Button: Button to be checked
  *          This parameter can be one of the following values:
  *            @arg  BUTTON_WAKEUP: Wakeup Push Button 
  *            @arg  BUTTON_TAMPER: Tamper Push Button 
  *            @arg  BUTTON_KEY: Key Push Button
  * @retval The Button GPIO pin value
  */
uint32_t BSP_PB_GetState(Button_TypeDef Button)
{
  return HAL_GPIO_ReadPin(BUTTON_PORT[Button], BUTTON_PIN[Button]);
}

/**
  * @brief  Configures COM port.
  * @param  COM: COM port to be configured.
  *          This parameter can be one of the following values:
  *            @arg  COM1 
  *            @arg  COM2 
  * @param  huart: Pointer to a UART_HandleTypeDef structure that contains the
  *                configuration information for the specified USART peripheral.
  */
void BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef *huart)
{
  GPIO_InitTypeDef GPIO_InitStruct;

  /* Enable GPIO clock */
  EVAL_COMx_TX_GPIO_CLK_ENABLE(COM);
  EVAL_COMx_RX_GPIO_CLK_ENABLE(COM);

  /* Enable USART clock */
  EVAL_COMx_CLK_ENABLE(COM);

  /* Configure USART Tx as alternate function */
  GPIO_InitStruct.Pin = COM_TX_PIN[COM];
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
  GPIO_InitStruct.Pull = GPIO_PULLUP;
  GPIO_InitStruct.Alternate = COM_TX_AF[COM];
  HAL_GPIO_Init(COM_TX_PORT[COM], &GPIO_InitStruct);

  /* Configure USART Rx as alternate function */
  GPIO_InitStruct.Pin = COM_RX_PIN[COM];
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Alternate = COM_RX_AF[COM];
  HAL_GPIO_Init(COM_RX_PORT[COM], &GPIO_InitStruct);

  /* USART configuration */
  huart->Instance = COM_USART[COM];
  HAL_UART_Init(huart);
}

/**
  * @brief  Configures joystick GPIO and EXTI modes.
  * @param  Joy_Mode: Button mode.
  *          This parameter can be one of the following values:
  *            @arg  JOY_MODE_GPIO: Joystick pins will be used as simple IOs
  *            @arg  JOY_MODE_EXTI: Joystick pins will be connected to EXTI line 
  *                                 with interrupt generation capability  
  * @retval IO_OK: if all initializations are OK. Other value if error.
  */
uint8_t BSP_JOY_Init(JOYMode_TypeDef Joy_Mode)
{
  uint8_t ret = 0;
  
  /* Initialize the IO functionalities */
  ret = BSP_IO_Init();
  
  /* Configure joystick pins in IT mode */
  if(Joy_Mode == JOY_MODE_EXTI)
  {
    /* Configure IO interrupt acquisition mode */
    BSP_IO_ConfigPin(JOY_ALL_PINS, IO_MODE_IT_FALLING_EDGE);
  }
  
  return ret; 
}

/**
  * @brief  Returns the current joystick status.
  * @retval Code of the joystick key pressed
  *          This code can be one of the following values:
  *            @arg  JOY_NONE
  *            @arg  JOY_SEL
  *            @arg  JOY_DOWN
  *            @arg  JOY_LEFT
  *            @arg  JOY_RIGHT
  *            @arg  JOY_UP
  */
JOYState_TypeDef BSP_JOY_GetState(void)
{
  uint16_t tmp = 0;   
  
  /* Read the status joystick pins */
  tmp = BSP_IO_ReadPin(JOY_ALL_PINS);
   
  /* Check the pressed keys */  
  if((tmp & JOY_NONE_PIN) == JOY_NONE)
  {
    return(JOYState_TypeDef) JOY_NONE;
  }
  else if(!(tmp & JOY_SEL_PIN))
  {
    return(JOYState_TypeDef) JOY_SEL;
  }
  else if(!(tmp & JOY_DOWN_PIN))
  {
    return(JOYState_TypeDef) JOY_DOWN;
  } 
  else if(!(tmp & JOY_LEFT_PIN))
  {
    return(JOYState_TypeDef) JOY_LEFT;
  }
  else if(!(tmp & JOY_RIGHT_PIN))
  {
    return(JOYState_TypeDef) JOY_RIGHT;
  }
  else if(!(tmp & JOY_UP_PIN))
  {
    return(JOYState_TypeDef) JOY_UP;
  }
  else
  { 
    return(JOYState_TypeDef) JOY_NONE;
  }  
}

/**
  * @brief  Check TS3510 touch screen presence
  * @retval Return 0 if TS3510 is detected, return 1 if not detected 
  */
uint8_t BSP_TS3510_IsDetected(void)
{
  HAL_StatusTypeDef status = HAL_OK;
  uint32_t error = 0;
  uint8_t a_buffer;
  
  uint8_t tmp_buffer[2] = {0x81, 0x08};
   
  /* Prepare for LCD read data */
  IOE_WriteMultiple(TS3510_I2C_ADDRESS, 0x8A, tmp_buffer, 2);

  status = HAL_I2C_Mem_Read(&heval_I2c, TS3510_I2C_ADDRESS, 0x8A, I2C_MEMADD_SIZE_8BIT, &a_buffer, 1, 1000);

  /* Check the communication status */
  if(status != HAL_OK)
  {
    error = (uint32_t)HAL_I2C_GetError(&heval_I2c);

    /* I2C error occurred */
    I2Cx_Error(TS3510_I2C_ADDRESS);
    
    if(error == HAL_I2C_ERROR_AF)
    {
      return 1;
    }    
  }  
  return 0;
}
/*******************************************************************************
                            BUS OPERATIONS
*******************************************************************************/

/******************************* I2C Routines *********************************/
/**
  * @brief  Initializes I2C MSP.
  */
static void I2Cx_MspInit(void)
{
  GPIO_InitTypeDef  GPIO_InitStruct;  
  
  /*** Configure the GPIOs ***/  
  /* Enable GPIO clock */
  EVAL_I2Cx_SCL_SDA_GPIO_CLK_ENABLE();
  
  /* Configure I2C Tx as alternate function */
  GPIO_InitStruct.Pin = EVAL_I2Cx_SCL_PIN;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
  GPIO_InitStruct.Alternate = EVAL_I2Cx_SCL_SDA_AF;
  HAL_GPIO_Init(EVAL_I2Cx_SCL_SDA_GPIO_PORT, &GPIO_InitStruct);
  
  /* Configure I2C Rx as alternate function */
  GPIO_InitStruct.Pin = EVAL_I2Cx_SDA_PIN;
  HAL_GPIO_Init(EVAL_I2Cx_SCL_SDA_GPIO_PORT, &GPIO_InitStruct);
  
  /*** Configure the I2C peripheral ***/ 
  /* Enable I2C clock */
  EVAL_I2Cx_CLK_ENABLE();
  
  /* Force the I2C peripheral clock reset */  
  EVAL_I2Cx_FORCE_RESET(); 
  
  /* Release the I2C peripheral clock reset */  
  EVAL_I2Cx_RELEASE_RESET(); 
  
  /* Enable and set I2Cx Interrupt to a lower priority */
  HAL_NVIC_SetPriority(EVAL_I2Cx_EV_IRQn, 0x0F, 0);
  HAL_NVIC_EnableIRQ(EVAL_I2Cx_EV_IRQn);
  
  /* Enable and set I2Cx Interrupt to a lower priority */
  HAL_NVIC_SetPriority(EVAL_I2Cx_ER_IRQn, 0x0F, 0);
  HAL_NVIC_EnableIRQ(EVAL_I2Cx_ER_IRQn);
}

/**
  * @brief  Initializes I2C HAL.
  */
static void I2Cx_Init(void)
{
  if(HAL_I2C_GetState(&heval_I2c) == HAL_I2C_STATE_RESET)
  {
    heval_I2c.Instance = I2C1;
    heval_I2c.Init.ClockSpeed      = BSP_I2C_SPEED;
    heval_I2c.Init.DutyCycle       = I2C_DUTYCYCLE_2;
    heval_I2c.Init.OwnAddress1     = 0;
    heval_I2c.Init.AddressingMode  = I2C_ADDRESSINGMODE_7BIT;
    heval_I2c.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
    heval_I2c.Init.OwnAddress2     = 0;
    heval_I2c.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
    heval_I2c.Init.NoStretchMode   = I2C_NOSTRETCH_DISABLED;  
    
    /* Init the I2C */
    I2Cx_MspInit();
    HAL_I2C_Init(&heval_I2c);    
  }
}

/**
  * @brief  Configures I2C Interrupt.
  */
static void I2Cx_ITConfig(void)
{
  static uint8_t I2C_IT_Enabled = 0;
  GPIO_InitTypeDef  GPIO_InitStruct;
  
  if(I2C_IT_Enabled == 0)
  {
    I2C_IT_Enabled = 1;
    /* Enable the GPIO EXTI clock */
    __GPIOI_CLK_ENABLE();
    __SYSCFG_CLK_ENABLE();
    
    GPIO_InitStruct.Pin   = GPIO_PIN_8;
    GPIO_InitStruct.Pull  = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
    GPIO_InitStruct.Mode  = GPIO_MODE_IT_FALLING;
    HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
    
    /* Enable and set GPIO EXTI Interrupt to the lowest priority */
    HAL_NVIC_SetPriority((IRQn_Type)(EXTI9_5_IRQn), 0x0F, 0x0F);
    HAL_NVIC_EnableIRQ((IRQn_Type)(EXTI9_5_IRQn));
  }
}

/**
  * @brief  Writes a single data.
  * @param  Addr: I2C address
  * @param  Reg: Register address 
  * @param  Value: Data to be written
  */
static void I2Cx_Write(uint8_t Addr, uint8_t Reg, uint8_t Value)
{
  HAL_StatusTypeDef status = HAL_OK;

  status = HAL_I2C_Mem_Write(&heval_I2c, Addr, (uint16_t)Reg, I2C_MEMADD_SIZE_8BIT, &Value, 1, 100); 

  /* Check the communication status */
  if(status != HAL_OK)
  {
    /* Execute user timeout callback */
    I2Cx_Error(Addr);
  }
}

/**
  * @brief  Reads a single data.
  * @param  Addr: I2C address
  * @param  Reg: Register address 
  * @retval Read data
  */
static uint8_t I2Cx_Read(uint8_t Addr, uint8_t Reg)
{
  HAL_StatusTypeDef status = HAL_OK;
  uint8_t Value = 0;
  
  status = HAL_I2C_Mem_Read(&heval_I2c, Addr, Reg, I2C_MEMADD_SIZE_8BIT, &Value, 1, 1000);
  
  /* Check the communication status */
  if(status != HAL_OK)
  {
    /* Execute user timeout callback */
    I2Cx_Error(Addr);
  }
  return Value;   
}

/**
  * @brief  Reads multiple data.
  * @param  Addr: I2C address
  * @param  Reg: Reg address 
  * @param  MemAddress: Internal memory address
  * @param  Buffer: Pointer to data buffer
  * @param  Length: Length of the data
  * @retval Number of read data
  */
static HAL_StatusTypeDef I2Cx_ReadMultiple(uint8_t Addr, uint16_t Reg, uint16_t MemAddress, uint8_t *Buffer, uint16_t Length)
{
  HAL_StatusTypeDef status = HAL_OK;

  if(Addr == EXC7200_I2C_ADDRESS)
  {
    status = HAL_I2C_Master_Receive(&heval_I2c, Addr, Buffer, Length, 1000);  
  }
  else
  {
    status = HAL_I2C_Mem_Read(&heval_I2c, Addr, (uint16_t)Reg, MemAddress, Buffer, Length, 1000);
  }

  /* Check the communication status */
  if(status != HAL_OK)
  {
    /* I2C error occurred */
    I2Cx_Error(Addr);
  }
  return status;    
}

/**
  * @brief  Writes a value in a register of the device through BUS in using DMA mode.
  * @param  Addr: Device address on BUS Bus.  
  * @param  Reg: The target register address to write
  * @param  MemAddress: Internal memory address
  * @param  Buffer: The target register value to be written 
  * @param  Length: buffer size to be written
  * @retval HAL status
  */
static HAL_StatusTypeDef I2Cx_WriteMultiple(uint8_t Addr, uint16_t Reg, uint16_t MemAddress, uint8_t *Buffer, uint16_t Length)
{
  HAL_StatusTypeDef status = HAL_OK;
  
  status = HAL_I2C_Mem_Write(&heval_I2c, Addr, (uint16_t)Reg, MemAddress, Buffer, Length, 1000);
  
  /* Check the communication status */
  if(status != HAL_OK)
  {
    /* Re-Initialize the I2C Bus */
    I2Cx_Error(Addr);
  }
  return status;
}

/**
  * @brief  Checks if target device is ready for communication. 
  * @note   This function is used with Memory devices
  * @param  DevAddress: Target device address
  * @param  Trials: Number of trials
  * @retval HAL status
  */
static HAL_StatusTypeDef I2Cx_IsDeviceReady(uint16_t DevAddress, uint32_t Trials)
{ 
  return (HAL_I2C_IsDeviceReady(&heval_I2c, DevAddress, Trials, 1000));
}

/**
  * @brief  Manages error callback by re-initializing I2C.
  * @param  Addr: I2C Address
  */
static void I2Cx_Error(uint8_t Addr)
{
  /* De-initialize the I2C communication bus */
  HAL_I2C_DeInit(&heval_I2c);
  
  /* Re-Initialize the I2C communication bus */
  I2Cx_Init();
}

/*******************************************************************************
                            LINK OPERATIONS
*******************************************************************************/

/********************************* LINK IOE ***********************************/

/**
  * @brief  Initializes IOE low level.
  */
void IOE_Init(void) 
{
  I2Cx_Init();
}

/**
  * @brief  Configures IOE low level interrupt.
  */
void IOE_ITConfig(void)
{
  I2Cx_ITConfig();
}

/**
  * @brief  IOE writes single data.
  * @param  Addr: I2C address
  * @param  Reg: Register address 
  * @param  Value: Data to be written
  */
void IOE_Write(uint8_t Addr, uint8_t Reg, uint8_t Value)
{
  I2Cx_Write(Addr, Reg, Value);
}

/**
  * @brief  IOE reads single data.
  * @param  Addr: I2C address
  * @param  Reg: Register address 
  * @retval Read data
  */
uint8_t IOE_Read(uint8_t Addr, uint8_t Reg)
{
  return I2Cx_Read(Addr, Reg);
}

/**
  * @brief  IOE reads multiple data.
  * @param  Addr: I2C address
  * @param  Reg: Register address 
  * @param  Buffer: Pointer to data buffer
  * @param  Length: Length of the data
  * @retval Number of read data
  */
uint16_t IOE_ReadMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length)
{
 return I2Cx_ReadMultiple(Addr, (uint16_t)Reg, I2C_MEMADD_SIZE_8BIT, Buffer, Length);
}

/**
  * @brief  IOE writes multiple data.
  * @param  Addr: I2C address
  * @param  Reg: Register address 
  * @param  Buffer: Pointer to data buffer
  * @param  Length: Length of the data
  */
void IOE_WriteMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length)
{
  I2Cx_WriteMultiple(Addr, (uint16_t)Reg, I2C_MEMADD_SIZE_8BIT, Buffer, Length);
}

/**
  * @brief  IOE delay 
  * @param  Delay: Delay in ms
  */
void IOE_Delay(uint32_t Delay)
{
  HAL_Delay(Delay);
}

/********************************* LINK AUDIO *********************************/

/**
  * @brief  Initializes Audio low level.
  */
void AUDIO_IO_Init(void) 
{
  I2Cx_Init();
}

/**
  * @brief  DeInitializes Audio low level.
  */
void AUDIO_IO_DeInit(void)
{

}

/**
  * @brief  Writes a single data.
  * @param  Addr: I2C address
  * @param  Reg: Reg address 
  * @param  Value: Data to be written
  */
void AUDIO_IO_Write(uint8_t Addr, uint16_t Reg, uint16_t Value)
{
  uint16_t tmp = Value;
  
  Value = ((uint16_t)(tmp >> 8) & 0x00FF);
  
  Value |= ((uint16_t)(tmp << 8)& 0xFF00);
  
  I2Cx_WriteMultiple(Addr, Reg, I2C_MEMADD_SIZE_16BIT,(uint8_t*)&Value, 2);
}

/**
  * @brief  Reads a single data.
  * @param  Addr: I2C address
  * @param  Reg: Reg address 
  * @retval Data to be read
  */
uint16_t AUDIO_IO_Read(uint8_t Addr, uint16_t Reg)
{
  uint16_t Read_Value = 0, tmp = 0;
  
  I2Cx_ReadMultiple(Addr, Reg, I2C_MEMADD_SIZE_16BIT, (uint8_t*)&Read_Value, 2); 
  
  tmp = ((uint16_t)(Read_Value >> 8) & 0x00FF);
  
  tmp |= ((uint16_t)(Read_Value << 8)& 0xFF00);
  
  Read_Value = tmp;
  
  return Read_Value;
}

/**
  * @brief  AUDIO Codec delay 
  * @param  Delay: Delay in ms
  */
void AUDIO_IO_Delay(uint32_t Delay)
{
  HAL_Delay(Delay);
}

/********************************* LINK CAMERA ********************************/

/**
  * @brief  Initializes Camera low level.
  */
void CAMERA_IO_Init(void) 
{
  I2Cx_Init();
}

/**
  * @brief  Camera writes single data.
  * @param  Addr: I2C address
  * @param  Reg: Register address 
  * @param  Value: Data to be written
  */
void CAMERA_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value)
{
  I2Cx_Write(Addr, Reg, Value);
}

/**
  * @brief  Camera reads single data.
  * @param  Addr: I2C address
  * @param  Reg: Register address 
  * @retval Read data
  */
uint8_t CAMERA_IO_Read(uint8_t Addr, uint8_t Reg)
{
  return I2Cx_Read(Addr, Reg);
}

/**
  * @brief  Camera delay 
  * @param  Delay: Delay in ms
  */
void CAMERA_Delay(uint32_t Delay)
{
  HAL_Delay(Delay);
}

/******************************** LINK I2C EEPROM *****************************/

/**
  * @brief  Initializes peripherals used by the I2C EEPROM driver.
  */
void EEPROM_IO_Init(void)
{
  I2Cx_Init();
}

/**
  * @brief  Write data to I2C EEPROM driver in using DMA channel.
  * @param  DevAddress: Target device address
  * @param  MemAddress: Internal memory address
  * @param  pBuffer: Pointer to data buffer
  * @param  BufferSize: Amount of data to be sent
  * @retval HAL status
  */
HAL_StatusTypeDef EEPROM_IO_WriteData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize)
{
  return (I2Cx_WriteMultiple(DevAddress, MemAddress, I2C_MEMADD_SIZE_16BIT, pBuffer, BufferSize));
}

/**
  * @brief  Read data from I2C EEPROM driver in using DMA channel.
  * @param  DevAddress: Target device address
  * @param  MemAddress: Internal memory address
  * @param  pBuffer: Pointer to data buffer
  * @param  BufferSize: Amount of data to be read
  * @retval HAL status
  */
HAL_StatusTypeDef EEPROM_IO_ReadData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize)
{
  return (I2Cx_ReadMultiple(DevAddress, MemAddress, I2C_MEMADD_SIZE_16BIT, pBuffer, BufferSize));
}

/**
  * @brief  Checks if target device is ready for communication. 
  * @note   This function is used with Memory devices
  * @param  DevAddress: Target device address
  * @param  Trials: Number of trials
  * @retval HAL status
  */
HAL_StatusTypeDef EEPROM_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials)
{ 
  return (I2Cx_IsDeviceReady(DevAddress, Trials));
}

/**
  * @}
  */

/**
  * @}
  */ 

/**
  * @}
  */

/**
  * @}
  */