archipack_roof.py

# -*- coding:utf-8 -*-

# ##### BEGIN GPL LICENSE BLOCK #####
#
#  This program is free software; you can redistribute it and/or
#  modify it under the terms of the GNU General Public License
#  as published by the Free Software Foundation; either version 2
#  of the License, or (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software Foundation,
#  Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110- 1301, USA.
#
# ##### END GPL LICENSE BLOCK #####

# <pep8 compliant>

# ----------------------------------------------------------
# Author: Stephen Leger (s-leger)
#
# ----------------------------------------------------------
# noinspection PyUnresolvedReferences
import bpy
import time
# noinspection PyUnresolvedReferences
from bpy.types import Operator, PropertyGroup, Mesh, Panel
from bpy.props import (
    FloatProperty, BoolProperty, IntProperty,
    StringProperty, EnumProperty,
    CollectionProperty
    )
from .bmesh_utils import BmeshEdit as bmed
from random import randint
import bmesh
from mathutils import Vector, Matrix
from math import sin, cos, pi, atan2, sqrt, tan
from .archipack_manipulator import Manipulable, archipack_manipulator
from .archipack_2d import Line, Arc
from .archipack_preset import ArchipackPreset, PresetMenuOperator
from .archipack_object import ArchipackCreateTool, ArchipackObject
from .archipack_cutter import (
    CutAblePolygon, CutAbleGenerator,
    ArchipackCutter,
    ArchipackCutterPart
    )


class Roof():

    def __init__(self):
        self.angle_0 = 0
        self.v0_idx = 0
        self.v1_idx = 0
        self.constraint_type = None
        self.slope_left = 1
        self.slope_right = 1
        self.width_left = 1
        self.width_right = 1
        self.auto_left = 'AUTO'
        self.auto_right = 'AUTO'
        self.type = 'SIDE'
        # force hip or valley
        self.enforce_part = 'AUTO'
        self.triangular_end = False
        # seg is part of hole
        self.is_hole = False

    def copy_params(self, s):
        s.angle_0 = self.angle_0
        s.v0_idx = self.v0_idx
        s.v1_idx = self.v1_idx
        s.constraint_type = self.constraint_type
        s.slope_left = self.slope_left
        s.slope_right = self.slope_right
        s.width_left = self.width_left
        s.width_right = self.width_right
        s.auto_left = self.auto_left
        s.auto_right = self.auto_right
        s.type = self.type
        s.enforce_part = self.enforce_part
        s.triangular_end = self.triangular_end
        # segment is part of hole / slice
        s.is_hole = self.is_hole

    @property
    def copy(self):
        s = StraightRoof(self.p.copy(), self.v.copy())
        self.copy_params(s)
        return s

    def straight(self, length, t=1):
        s = self.copy
        s.p = self.lerp(t)
        s.v = self.v.normalized() * length
        return s

    def set_offset(self, offset, last=None):
        """
            Offset line and compute intersection point
            between segments
        """
        self.line = self.make_offset(offset, last)

    def offset(self, offset):
        o = self.copy
        o.p += offset * self.cross_z.normalized()
        return o

    @property
    def oposite(self):
        o = self.copy
        o.p += o.v
        o.v = -o.v
        return o

    @property
    def t_diff(self):
        return self.t_end - self.t_start

    def straight_roof(self, a0, length):
        s = self.straight(length).rotate(a0)
        r = StraightRoof(s.p, s.v)
        r.angle_0 = a0
        return r

    def curved_roof(self, a0, da, radius):
        n = self.normal(1).rotate(a0).scale(radius)
        if da < 0:
            n.v = -n.v
        c = n.p - n.v
        r = CurvedRoof(c, radius, n.angle, da)
        r.angle_0 = a0
        return r


class StraightRoof(Roof, Line):
    def __str__(self):
        return "p0:{} p1:{}".format(self.p0, self.p1)

    def __init__(self, p, v):
        Line.__init__(self, p, v)
        Roof.__init__(self)


class CurvedRoof(Roof, Arc):
    def __str__(self):
        return "t_start:{} t_end:{} dist:{}".format(self.t_start, self.t_end, self.dist)

    def __init__(self, c, radius, a0, da):
        Arc.__init__(self, c, radius, a0, da)
        Roof.__init__(self)


class RoofSegment():
    """
        Roof part with 2 polygons
        and "axis" StraightRoof segment
    """
    def __init__(self, seg, left, right):
        self.seg = seg
        self.left = left
        self.right = right
        self.a0 = 0
        self.reversed = False


class RoofAxisNode():
    """
        Connection between parts
        for radial analysis
    """
    def __init__(self):
        # axis segments
        self.segs = []
        self.root = None
        self.center = 0
        # store count of horizontal segs
        self.n_horizontal = 0
        # store count of slopes segs
        self.n_slope = 0

    @property
    def count(self):
        return len(self.segs)

    @property
    def last(self):
        """
            last segments in this node
        """
        return self.segs[-1]

    def left(self, index):
        if index + 1 >= self.count:
            return self.segs[0]
        return self.segs[index + 1]

    def right(self, index):
        return self.segs[index - 1]

    def add(self, a0, reversed, seg, left, right):

        if seg.constraint_type == 'HORIZONTAL':
            self.n_horizontal += 1
        elif seg.constraint_type == 'SLOPE':
            self.n_slope += 1

        s = RoofSegment(seg, left, right)
        s.a0 = a0
        s.reversed = reversed
        if reversed:
            self.root = s
        self.segs.append(s)

    def update_center(self):
        for i, s in enumerate(self.segs):
            if s is self.root:
                self.center = i
                return

    # sort tree segments by angle
    def partition(self, array, begin, end):
        pivot = begin
        for i in range(begin + 1, end + 1):
            if array[i].a0 < array[begin].a0:
                pivot += 1
                array[i], array[pivot] = array[pivot], array[i]
        array[pivot], array[begin] = array[begin], array[pivot]
        return pivot

    def sort(self):
        def _quicksort(array, begin, end):
            if begin >= end:
                return
            pivot = self.partition(array, begin, end)
            _quicksort(array, begin, pivot - 1)
            _quicksort(array, pivot + 1, end)

        end = len(self.segs) - 1
        _quicksort(self.segs, 0, end)

        # index of root in segs array
        self.update_center()


class RoofPolygon(CutAblePolygon):
    """
        ccw roof pitch boundary
        closed by explicit segment
        handle triangular shape with zero axis length

        mov  <_________________
            |                  /\
            |                  | rot
            |                  |   left     last <> next
            \/_____axis_______>|

     node   <_____axis________      next
            |                  /\
            |                  | rot
            |                  |   right    last <> next
        mov \/________________>|
                           side angle
    """
    def __init__(self, axis, side, fake_axis=None):
        """
            Create a default rectangle
            axis from node to next
            slope float -z for 1 in side direction
            side in ['LEFT', 'RIGHT'] in axis direction

            NOTE:
            when axis length is null (eg: triangular shape)
            use "fake_axis" with a 1 length to handle
            distance from segment
        """
        if side == 'LEFT':
            # slope
            self.slope = axis.slope_left
            # width
            self.width = axis.width_left
            # constraint width
            self.auto_mode = axis.auto_left
        else:
            # slope
            self.slope = axis.slope_right
            # width
            self.width = axis.width_right
            # constraint width
            self.auto_mode = axis.auto_right

        self.side = side
        # backward deps
        self.backward = False
        # pointers to neighbors along axis
        self.last = None
        self.next = None
        self.other_side = None

        # axis segment
        if side == 'RIGHT':
            self.axis = axis.oposite
        else:
            self.axis = axis

        self.fake_axis = None

        # _axis is either a fake one or real one
        # to prevent further check
        if fake_axis is None:
            self._axis = self.axis
            self.fake_axis = self.axis
            self.next_cross = axis
            self.last_cross = axis
        else:
            if side == 'RIGHT':
                self.fake_axis = fake_axis.oposite
            else:
                self.fake_axis = fake_axis
            self._axis = self.fake_axis

        # unit vector perpendicular to axis
        # looking at outside part
        v = self.fake_axis.sized_normal(0, -1)
        self.cross = v
        self.next_cross = v
        self.last_cross = v

        self.convex = True
        # segments from axis end in ccw order
        # closed by explicit segment
        self.segs = []
        # holes
        self.holes = []

        # Triangular ends
        self.node_tri = False
        self.next_tri = False
        self.is_tri = False

        # sizes
        self.tmin = 0
        self.tmax = 1
        self.dt = 1
        self.ysize = 0
        self.xsize = 0
        self.vx = Vector()
        self.vy = Vector()
        self.vz = Vector()

    def move_node(self, p):
        """
            Move slope point in node side
        """
        if self.side == 'LEFT':
            self.segs[-1].p0 = p
            self.segs[2].p1 = p
        else:
            self.segs[2].p0 = p
            self.segs[1].p1 = p

    def move_next(self, p):
        """
            Move slope point in next side
        """
        if self.side == 'LEFT':
            self.segs[2].p0 = p
            self.segs[1].p1 = p
        else:
            self.segs[-1].p0 = p
            self.segs[2].p1 = p

    def node_link(self, da):
        angle_90 = round(pi / 2, 4)
        if self.side == 'LEFT':
            idx = -1
        else:
            idx = 1
        da = abs(round(da, 4))
        type = "LINK"
        if da < angle_90:
            type += "_VALLEY"
        elif da > angle_90:
            type += "_HIP"
        self.segs[idx].type = type

    def next_link(self, da):
        angle_90 = round(pi / 2, 4)
        if self.side == 'LEFT':
            idx = 1
        else:
            idx = -1
        da = abs(round(da, 4))
        type = "LINK"
        if da < angle_90:
            type += "_VALLEY"
        elif da > angle_90:
            type += "_HIP"
        self.segs[idx].type = type

    def bind(self, last, ccw=False):
        """
            always in axis real direction
        """
        # backward dependency relative to axis
        if last.backward:
            self.backward = self.side == last.side

        if self.side == last.side:
            last.next_cross = self.cross
        else:
            last.last_cross = self.cross

        self.last_cross = last.cross

        # axis of last / next segments
        if self.backward:
            self.next = last
            last.last = self
        else:
            self.last = last
            last.next = self

        # width auto
        if self.auto_mode == 'AUTO':
            self.width = last.width
            self.slope = last.slope
        elif self.auto_mode == 'WIDTH' and self.width != 0:
            self.slope = last.slope * last.width / self.width
        elif self.auto_mode == 'SLOPE' and self.slope != 0:
            self.width = last.width * last.slope / self.slope

        self.make_segments()
        last.make_segments()

        res, p, t = self.segs[2].intersect(last.segs[2])

        if res:
            # dont move anything when no intersection found
            # aka when delta angle == 0
            self.move_node(p)
            if self.side != last.side:
                last.move_node(p)
            else:
                last.move_next(p)

        # Free mode
        # move border
        # and find intersections
        # with sides
        if self.auto_mode == 'ALL':
            s0 = self._axis.offset(-self.width)
            res, p0, t = self.segs[1].intersect(s0)
            if res:
                self.segs[2].p0 = p0
                self.segs[1].p1 = p0
            res, p1, t = self.segs[-1].intersect(s0)
            if res:
                self.segs[2].p1 = p1
                self.segs[-1].p0 = p1

        #   /\
        #   |   angle
        #   |____>
        #
        # v1 node -> next
        if self.side == 'LEFT':
            v1 = self._axis.v
        else:
            v1 = -self._axis.v

        if last.side == self.side:
            # contiguous, v0 node <- next

            # half angle between segments
            if self.side == 'LEFT':
                v0 = -last._axis.v
            else:
                v0 = last._axis.v
            da = v0.angle_signed(v1)
            if ccw:
                if da < 0:
                    da = 2 * pi + da
            elif da > 0:
                da = da - 2 * pi
            last.next_link(0.5 * da)

        else:
            # alternate v0 node -> next
            # half angle between segments
            if last.side == 'LEFT':
                v0 = last._axis.v
            else:
                v0 = -last._axis.v
            da = v0.angle_signed(v1)
            # angle always ccw
            if ccw:
                if da < 0:
                    da = 2 * pi + da
            elif da > 0:
                da = da - 2 * pi
            last.node_link(0.5 * da)

        self.node_link(-0.5 * da)

    def next_seg(self, index):
        idx = self.get_index(index + 1)
        return self.segs[idx]

    def last_seg(self, index):
        return self.segs[index - 1]

    def make_segments(self):
        if len(self.segs) < 1:
            s0 = self._axis
            w = self.width
            s1 = s0.straight(w, 1).rotate(pi / 2)
            s1.type = 'SIDE'
            s3 = s0.straight(w, 0).rotate(pi / 2).oposite
            s3.type = 'SIDE'
            s2 = StraightRoof(s1.p1, s3.p0 - s1.p1)
            s2.type = 'BOTTOM'
            self.segs = [s0, s1, s2, s3]

    def move_side(self, pt):
        """
            offset side to point
        """
        s2 = self.segs[2]
        d0, t = self.distance(s2.p0)
        d1, t = self.distance(pt)
        # adjust width and slope according
        self.width = d1
        self.slope = self.slope * d0 / d1
        self.segs[2] = s2.offset(d1 - d0)

    def propagate_backward(self, pt):
        """
            Propagate slope, keep 2d angle of slope
            Move first point and border
            keep border parallel
            adjust slope
            and next shape
        """
        # distance of p
        # offset side to point
        self.move_side(pt)

        # move verts on node side
        self.move_next(pt)

        if self.side == 'LEFT':
            # move verts on next side
            res, p, t = self.segs[-1].intersect(self.segs[2])
        else:
            # move verts on next side
            res, p, t = self.segs[1].intersect(self.segs[2])

        if res:
            self.move_node(p)

            if self.next is not None and self.next.auto_mode in {'AUTO'}:
                self.next.propagate_backward(p)

    def propagate_forward(self, pt):
        """
            Propagate slope, keep 2d angle of slope
            Move first point and border
            keep border parallel
            adjust slope
            and next shape
        """
        # offset side to point
        self.move_side(pt)

        # move verts on node side
        self.move_node(pt)
        if self.side == 'LEFT':
            # move verts on next side
            res, p, t = self.segs[1].intersect(self.segs[2])
        else:
            # move verts on next side
            res, p, t = self.segs[-1].intersect(self.segs[2])

        if res:
            self.move_next(p)
            if self.next is not None and self.next.auto_mode in {'AUTO'}:
                self.next.propagate_forward(p)

    def rotate_next_slope(self, a0):
        """
            Rotate next slope part
        """
        if self.side == 'LEFT':
            s0 = self.segs[1].rotate(a0)
            s1 = self.segs[2]
            res, p, t = s1.intersect(s0)
        else:
            s0 = self.segs[2]
            s1 = self.segs[-1]
            res, p, t = s1.oposite.rotate(-a0).intersect(s0)

        if res:
            s1.p0 = p
            s0.p1 = p

            if self.next is not None:
                if self.next.auto_mode == 'ALL':
                    return
                if self.next.backward:
                    self.next.propagate_backward(p)
                else:
                    self.next.propagate_forward(p)

    def rotate_node_slope(self, a0):
        """
            Rotate node slope part
        """
        if self.side == 'LEFT':
            s0 = self.segs[2]
            s1 = self.segs[-1]
            res, p, t = s1.oposite.rotate(-a0).intersect(s0)
        else:
            s0 = self.segs[1].rotate(a0)
            s1 = self.segs[2]
            res, p, t = s1.intersect(s0)

        if res:
            s1.p0 = p
            s0.p1 = p

            if self.next is not None:
                if self.next.auto_mode == 'ALL':
                    return
                if self.next.backward:
                    self.next.propagate_backward(p)
                else:
                    self.next.propagate_forward(p)

    def distance(self, pt):
        """
            distance from axis
            always use fake_axis here to
            allow axis being cut and
            still work
        """
        res, d, t = self.fake_axis.point_sur_segment(pt)
        return d, t

    def altitude(self, pt):
        d, t = self.distance(pt)
        return -d * self.slope

    def uv(self, pt):
        d, t = self.distance(pt)
        return ((t - self.tmin) * self.xsize, d)

    def intersect(self, seg):
        """
            compute intersections of a segment with boundaries
            segment must start on axis
            return segments inside
        """
        it = []
        for s in self.segs:
            res, p, t, u = seg.intersect_ext(s)
            if res:
                it.append((t, p))
        return it

    def merge(self, other):

        raise NotImplementedError

    def draw(self, context, z, verts, edges):
        f = len(verts)
        #
        #   0_______1
        #   |_______|
        #   3       2
        verts.extend([(s.p0.x, s.p0.y, z + self.altitude(s.p0)) for s in self.segs])
        n_segs = len(self.segs) - 1
        edges.extend([[f + i, f + i + 1] for i in range(n_segs)])
        edges.append([f + n_segs, f])
        """
        f = len(verts)
        verts.extend([(s.p1.x, s.p1.y, z + self.altitude(s.p1)) for s in self.segs])
        n_segs = len(self.segs) - 1
        edges.extend([[f + i, f + i + 1] for i in range(n_segs)])
        edges.append([f + n_segs, f])
        """
        # holes
        for hole in self.holes:
            f = len(verts)
            #
            #   0_______1
            #   |_______|
            #   3       2
            verts.extend([(s.p0.x, s.p0.y, z + self.altitude(s.p0)) for s in hole.segs])
            n_segs = len(hole.segs) - 1
            edges.extend([[f + i, f + i + 1] for i in range(n_segs)])
            edges.append([f + n_segs, f])

        # axis
        """
        f = len(verts)
        verts.extend([self.axis.p0.to_3d(), self.axis.p1.to_3d()])
        edges.append([f, f + 1])

        # cross
        f = len(verts)
        verts.extend([self.axis.lerp(0.5).to_3d(), (self.axis.lerp(0.5) + self.cross.v).to_3d()])
        edges.append([f, f + 1])
        """

        # relationships arrows
        if self.next or self.last:
            w = 0.2
            s0 = self._axis.offset(-0.5 * self.ysize)
            p0 = s0.lerp(0.4).to_3d()
            p0.z = z
            p1 = s0.lerp(0.6).to_3d()
            p1.z = z
            if self.side == 'RIGHT':
                p0, p1 = p1, p0
            if self.backward:
                p0, p1 = p1, p0
            s1 = s0.sized_normal(0.5, w)
            s2 = s0.sized_normal(0.5, -w)
            f = len(verts)
            p2 = s1.p1.to_3d()
            p2.z = z
            p3 = s2.p1.to_3d()
            p3.z = z
            verts.extend([p1, p0, p2, p3])
            edges.extend([[f + 1, f], [f + 2, f], [f + 3, f]])

    def as_string(self):
        """
            Print strips relationships
        """
        if self.backward:
            dir = "/\\"
            print("%s next" % (dir))
        else:
            dir = "\\/"
            print("%s node" % (dir))
        print("%s %s" % (dir, self.side))
        if self.backward:
            print("%s node" % (dir))
        else:
            print("%s next" % (dir))
        if self.next:
            print("_________")
            self.next.as_string()
        else:
            print("#########")

    def limits(self):
        dist = []
        param_t = []
        for s in self.segs:
            res, d, t = self.fake_axis.point_sur_segment(s.p0)
            param_t.append(t)
            dist.append(d)

        if len(param_t) > 0:
            self.tmin = min(param_t)
            self.tmax = max(param_t)
        else:
            self.tmin = 0
            self.tmax = 1

        self.dt = self.tmax - self.tmin

        if len(dist) > 0:
            self.ysize = max(dist)
        else:
            self.ysize = 0

        self.xsize = self.fake_axis.length * self.dt
        # vectors components of part matrix
        # where x is is axis direction
        # y down
        # z up
        vx = -self.fake_axis.v.normalized().to_3d()
        vy = Vector((-vx.y, vx.x, self.slope)).normalized()
        self.vx = vx
        self.vy = vy
        self.vz = vx.cross(vy)


"""
import bmesh
m = C.object.data
[(round(v.co.x, 3), round(v.co.y, 3), round(v.co.z, 3)) for v in m.vertices]
[tuple(p.vertices) for p in m.polygons]

uvs = []
bpy.ops.object.mode_set(mode='EDIT')
bm = bmesh.from_edit_mesh(m)
[tuple(i.index for i in edge.verts) for edge in bm.edges]

layer = bm.loops.layers.uv.verify()
for i, face in enumerate(bm.faces):
    uv = []
    for j, loop in enumerate(face.loops):
        co = loop[layer].uv
        uv.append((round(co.x, 2), round(co.y, 2)))
    uvs.append(uv)
uvs
"""


class RoofGenerator(CutAbleGenerator):

    def __init__(self, d, origin=Vector((0, 0, 0))):
        self.parts = d.parts
        self.segs = []
        self.nodes = []
        self.pans = []
        self.length = 0
        self.origin = origin.to_2d()
        self.z = origin.z
        self.width_right = d.width_right
        self.width_left = d.width_left
        self.slope_left = d.slope_left
        self.slope_right = d.slope_right
        self.user_defined_tile = None
        self.user_defined_uvs = None
        self.user_defined_mat = None
        self.is_t_child = d.t_parent != ""

    def add_part(self, part):

        if len(self.segs) < 1 or part.bound_idx < 1:
            s = None
        else:
            s = self.segs[part.bound_idx - 1]

        a0 = part.a0

        if part.constraint_type == 'SLOPE' and a0 == 0:
            a0 = 90

        # start a new roof
        if s is None:
            v = part.length * Vector((cos(a0), sin(a0)))
            s = StraightRoof(self.origin, v)
        else:
            s = s.straight_roof(a0, part.length)

        # parent segment (root) index is  v0_idx - 1
        s.v0_idx = min(len(self.segs), part.bound_idx)

        s.constraint_type = part.constraint_type

        if part.constraint_type == 'SLOPE':
            s.enforce_part = part.enforce_part
        else:
            s.enforce_part = 'AUTO'

        s.angle_0 = a0
        s.take_precedence = part.take_precedence
        s.auto_right = part.auto_right
        s.auto_left = part.auto_left
        s.width_left = part.width_left
        s.width_right = part.width_right
        s.slope_left = part.slope_left
        s.slope_right = part.slope_right
        s.type = 'AXIS'
        s.triangular_end = part.triangular_end
        self.segs.append(s)

    def locate_manipulators(self):
        """

        """
        for i, f in enumerate(self.segs):

            manipulators = self.parts[i].manipulators
            p0 = f.p0.to_3d()
            p0.z = self.z
            p1 = f.p1.to_3d()
            p1.z = self.z
            # angle from last to current segment
            if i > 0:

                manipulators[0].type_key = 'ANGLE'
                v0 = self.segs[f.v0_idx - 1].straight(-1, 1).v.to_3d()
                v1 = f.straight(1, 0).v.to_3d()
                manipulators[0].set_pts([p0, v0, v1])

            # segment length
            manipulators[1].type_key = 'SIZE'
            manipulators[1].prop1_name = "length"
            manipulators[1].set_pts([p0, p1, (1.0, 0, 0)])

            # dumb segment id
            manipulators[2].set_pts([p0, p1, (1, 0, 0)])

            p0 = f.lerp(0.5).to_3d()
            p0.z = self.z
            # size left
            p1 = f.sized_normal(0.5, -self.parts[i].width_left).p1.to_3d()
            p1.z = self.z
            manipulators[3].set_pts([p0, p1, (1, 0, 0)])

            # size right
            p1 = f.sized_normal(0.5, self.parts[i].width_right).p1.to_3d()
            p1.z = self.z
            manipulators[4].set_pts([p0, p1, (-1, 0, 0)])

            # slope left
            n0 = f.sized_normal(0.5, -1)
            p0 = n0.p1.to_3d()
            p0.z = self.z
            p1 = p0.copy()
            p1.z = self.z - self.parts[i].slope_left
            manipulators[5].set_pts([p0, p1, (-1, 0, 0)], normal=n0.v.to_3d())

            # slope right
            n0 = f.sized_normal(0.5, 1)
            p0 = n0.p1.to_3d()
            p0.z = self.z
            p1 = p0.copy()
            p1.z = self.z - self.parts[i].slope_right
            manipulators[6].set_pts([p0, p1, (1, 0, 0)], normal=n0.v.to_3d())

    def seg_partition(self, array, begin, end):
        """
            sort tree segments by angle
        """
        pivot = begin
        for i in range(begin + 1, end + 1):
            if array[i].a0 < array[begin].a0:
                pivot += 1
                array[i], array[pivot] = array[pivot], array[i]
        array[pivot], array[begin] = array[begin], array[pivot]
        return pivot

    def sort_seg(self, array, begin=0, end=None):
        # print("sort_child")
        if end is None:
            end = len(array) - 1

        def _quicksort(array, begin, end):
            if begin >= end:
                return
            pivot = self.seg_partition(array, begin, end)
            _quicksort(array, begin, pivot - 1)
            _quicksort(array, pivot + 1, end)
        return _quicksort(array, begin, end)

    def make_roof(self, context):
        """
            Init data structure for possibly multi branched nodes
            nodes : radial relationships
            pans : quad strip linear relationships
        """

        pans = []

        # node are connected segments
        # node
        # (segment idx)
        # (angle from root part > 0 right)
        # (reversed) a seg connected by p1
        #            "root" of node
        nodes = [RoofAxisNode() for s in range(len(self.segs) + 1)]

        # Init width on seg 0
        s0 = self.segs[0]
        if self.parts[0].auto_left in {'AUTO', 'SLOPE'}:
            s0.width_left = self.width_left
        if self.parts[0].auto_right in {'AUTO', 'SLOPE'}:
            s0.width_right = self.width_right
        if self.parts[0].auto_left in {'AUTO', 'WIDTH'}:
            s0.slope_left = self.slope_left
        if self.parts[0].auto_left in {'AUTO', 'WIDTH'}:
            s0.slope_right = self.slope_right

        # make nodes with HORIZONTAL constraints
        for idx, s in enumerate(self.segs):
            s.v1_idx = idx + 1
            if s.constraint_type == 'HORIZONTAL':
                left = RoofPolygon(s, 'LEFT')
                right = RoofPolygon(s, 'RIGHT')
                left.other_side = right
                right.other_side = left
                rs = RoofSegment(s, left, right)
                pans.append(rs)
                nodes[s.v0_idx].add(s.angle_0, False, s, left, right)
                nodes[s.v1_idx].add(-pi, True, s, left, right)

        # set first node root
        # so regular sort does work
        nodes[0].root = nodes[0].segs[0]
        self.nodes = nodes
        # Propagate slope and width
        # on node basis along axis
        # bi-direction Radial around node
        # from left and right to center
        # contiguous -> same
        # T: and (x % 2 == 1)
        # First one take precedence over others
        # others inherit from side
        #
        #         l / rb    l = left
        #          3        r = right
        #   l _1_ /         b = backward
        #   r     \
        #          2
        #          r\ l
        #
        # X: right one or left one l (x % 2 == 0)
        # inherits from side
        #
        #    l 3 lb         l = left
        # l__1_|_2_l        r = right
        # r    |   r        b = backward -> propagate in reverse axis direction
        #    r 4 rb
        #
        # for idx, node in enumerate(nodes):
        #    print("idx:%s node:%s" % (idx, node.root))

        for idx, node in enumerate(nodes):

            node.sort()

            nb_segs = node.count

            if node.root is None:
                continue

            left = node.root.left
            right = node.root.right

            # basic one single node
            if nb_segs < 2:
                left.make_segments()
                right.make_segments()
                continue

            # get "root" slope and width
            l_bind = left
            r_bind = right

            # simple case: 2 contiguous segments
            if nb_segs == 2:
                s = node.last
                s.right.bind(r_bind, ccw=False)
                s.left.bind(l_bind, ccw=True)
                continue

            # More than 2 segments, uneven distribution
            if nb_segs % 2 == 1:
                # find which child does take precedence
                # first one on rootline (arbitrary)
                center = (nb_segs - 1) / 2
            else:
                # even distribution
                center = nb_segs / 2

            # user defined precedence if any
            for i, s in enumerate(node.segs):
                if s.seg.take_precedence:
                    center = i
                    break

            # bind right side to center
            for i, s in enumerate(node.segs):
                # skip axis
                if i > 0:
                    if i < center:
                        # right contiguous with last
                        s.right.bind(r_bind, ccw=False)

                        # next bind to left
                        r_bind = s.left

                        # left backward, not bound
                        # so setup width and slope
                        if s.left.auto_mode in {'AUTO', 'WIDTH'}:
                            s.left.slope = right.slope
                        if s.left.auto_mode in {'AUTO', 'SLOPE'}:
                            s.left.width = right.width
                        s.left.backward = True
                    else:
                        # right bound to last
                        s.right.bind(r_bind, ccw=False)
                        break

            # bind left side to center
            for i, s in enumerate(reversed(node.segs)):
                # skip axis
                if i < nb_segs - center - 1:
                    # left contiguous with last
                    s.left.bind(l_bind, ccw=True)
                    # next bind to right
                    l_bind = s.right
                    # right backward, not bound
                    # so setup width and slope
                    if s.right.auto_mode in {'AUTO', 'WIDTH'}:
                        s.right.slope = left.slope
                    if s.right.auto_mode in {'AUTO', 'SLOPE'}:
                        s.right.width = left.width
                    s.right.backward = True
                else:
                    # right bound to last
                    s.left.bind(l_bind, ccw=True)
                    break

        # slope constraints allowed between segments
        # multiple (up to 2) on start and end
        # single between others
        #
        #    2 slope            2 slope           2 slope
        #     |                  |                 |
        #     |______section_1___|___section_2_____|
        #     |                  |                 |
        #     |                  |                 |
        #    multiple           single            multiple

        # add slopes constraints to nodes
        for i, s in enumerate(self.segs):
            if s.constraint_type == 'SLOPE':
                nodes[s.v0_idx].add(s.angle_0, False, s, None, None)

        # sort nodes, remove duplicate slopes between
        # horizontal, keeping only first one
        for idx, node in enumerate(nodes):
            to_remove = []
            node.sort()
            # remove dup between all
            # but start / end nodes
            if node.n_horizontal > 1:
                last = None
                for i, s in enumerate(node.segs):
                    if s.seg.constraint_type == last:
                        if s.seg.constraint_type == 'SLOPE':
                            to_remove.append(i)
                    last = s.seg.constraint_type
                for i in reversed(to_remove):
                    node.segs.pop(i)
                node.update_center()

        for idx, node in enumerate(nodes):

            # a node may contain many slopes
            # 2 * (part starting from node - 1)
            #
            #        s0
            # root 0 |_______
            #        |
            #        s1
            #
            #               s1
            # root   _______|
            #               |
            #               s0
            #
            #       s3  3  s2
            #     l   \l|r/ l
            # root  ___\|/___ 2
            #     r    /|\  r
            #         /r|l\
            #       s0  1  s1
            #
            #        s2  s1=slope
            #        |r /
            #        | / l
            #        |/____s
            #
            # root to first child -> equal side
            # any other childs -> oposite sides

            if node.n_horizontal == 1:
                # slopes at start or end of segment
                # segment slope is not affected
                if node.n_slope > 0:
                    # node has user def slope
                    s = node.root
                    s0 = node.left(node.center)
                    a0 = s0.seg.delta_angle(s.seg)
                    if node.root.reversed:
                        # slope at end of segment
                        # first one is right or left
                        if a0 < 0:
                            # right side
                            res, p, t = s0.seg.intersect(s.right.segs[2])
                            s.right.segs[-1].p0 = p
                            s.right.segs[2].p1 = p
                        else:
                            # left side
                            res, p, t = s0.seg.intersect(s.left.segs[2])
                            s.left.segs[1].p1 = p
                            s.left.segs[2].p0 = p
                        if node.n_slope > 1:
                            # last one must be left
                            s1 = node.right(node.center)
                            a1 = s1.seg.delta_angle(s.seg)
                            # both slopes on same side:
                            # skip this one
                            if a0 > 0 and a1 < 0:
                                # right side
                                res, p, t = s1.seg.intersect(s.right.segs[2])
                                s.right.segs[-1].p0 = p
                                s.right.segs[2].p1 = p
                            if a0 < 0 and a1 > 0:
                                # left side
                                res, p, t = s1.seg.intersect(s.left.segs[2])
                                s.left.segs[1].p1 = p
                                s.left.segs[2].p0 = p

                    else:
                        # slope at start of segment
                        if a0 < 0:
                            # right side
                            res, p, t = s0.seg.intersect(s.right.segs[2])
                            s.right.segs[1].p1 = p
                            s.right.segs[2].p0 = p
                        else:
                            # left side
                            res, p, t = s0.seg.intersect(s.left.segs[2])
                            s.left.segs[-1].p0 = p
                            s.left.segs[2].p1 = p
                        if node.n_slope > 1:
                            # last one must be right
                            s1 = node.right(node.center)
                            a1 = s1.seg.delta_angle(s.seg)
                            # both slopes on same side:
                            # skip this one
                            if a0 > 0 and a1 < 0:
                                # right side
                                res, p, t = s1.seg.intersect(s.right.segs[2])
                                s.right.segs[1].p1 = p
                                s.right.segs[2].p0 = p
                            if a0 < 0 and a1 > 0:
                                # left side
                                res, p, t = s1.seg.intersect(s.left.segs[2])
                                s.left.segs[-1].p0 = p
                                s.left.segs[2].p1 = p

            else:
                # slopes between segments
                # does change next segment slope
                for i, s0 in enumerate(node.segs):
                    s1 = node.left(i)
                    s2 = node.left(i + 1)

                    if s1.seg.constraint_type == 'SLOPE':

                        # 3 cases:
                        # s0 is root contiguous -> sides are same
                        # s2 is root contiguous -> sides are same
                        # back to back -> sides are not same

                        if s0.reversed:
                            # contiguous right / right
                            # 2 cases
                            # right is backward
                            # right is forward
                            if s2.right.backward:
                                # s0 depends on s2
                                main = s2.right
                                v = main.segs[1].v
                            else:
                                # s2 depends on s0
                                main = s0.right
                                v = -main.segs[-1].v
                            res, p, t = s1.seg.intersect(main.segs[2])
                            if res:
                                # slope vector
                                dp = p - s1.seg.p0
                                a0 = dp.angle_signed(v)
                                if s2.right.backward:
                                    main.rotate_node_slope(a0)
                                else:
                                    main.rotate_next_slope(-a0)
                        elif s2.reversed:
                            # contiguous left / left
                            # 2 cases
                            # left is backward
                            # left is forward
                            if s0.left.backward:
                                # s0 depends on s2
                                main = s0.left
                                v = -main.segs[-1].v
                            else:
                                # s2 depends on s0
                                main = s2.left
                                v = main.segs[1].v
                            res, p, t = s1.seg.intersect(main.segs[2])
                            if res:
                                # slope vector
                                dp = p - s1.seg.p0
                                a0 = dp.angle_signed(v)
                                if s0.left.backward:
                                    main.rotate_node_slope(-a0)
                                else:
                                    main.rotate_next_slope(a0)
                        else:
                            # back left / right
                            # 2 cases
                            # left is backward
                            # left is forward
                            if s0.left.backward:
                                # s2 depends on s0
                                main = s0.left
                                v = -main.segs[-1].v
                            else:
                                # s0 depends on s2
                                main = s2.right
                                v = main.segs[1].v

                            res, p, t = s1.seg.intersect(main.segs[2])
                            if res:
                                # slope vector
                                dp = p - s1.seg.p0
                                a0 = dp.angle_signed(v)
                                if s0.left.backward:
                                    main.rotate_node_slope(-a0)
                                else:
                                    main.rotate_node_slope(a0)

        self.pans = []

        # triangular ends
        for node in self.nodes:
            if node.root is None:
                continue
            if node.n_horizontal == 1 and node.root.seg.triangular_end:
                if node.root.reversed:
                    # Next side (segment end)
                    left = node.root.left
                    right = node.root.right
                    left.next_tri = True
                    right.next_tri = True

                    s0 = left.segs[1]
                    s1 = left.segs[2]
                    s2 = right.segs[-1]
                    s3 = right.segs[2]
                    p0 = s1.lerp(-left.width / s1.length)
                    p1 = s0.p0
                    p2 = s3.lerp(1 + right.width / s3.length)

                    # compute slope from points
                    p3 = p0.to_3d()
                    p3.z = -left.width * left.slope
                    p4 = p1.to_3d()
                    p5 = p2.to_3d()
                    p5.z = -right.width * right.slope
                    n = (p3 - p4).normalized().cross((p5 - p4).normalized())
                    v = n.cross(Vector((0, 0, 1)))
                    dz = n.cross(v)

                    # compute axis
                    s = StraightRoof(p1, v)
                    res, d0, t = s.point_sur_segment(p0)
                    res, d1, t = s.point_sur_segment(p2)
                    p = RoofPolygon(s, 'RIGHT')
                    p.make_segments()
                    p.slope = -dz.z / dz.to_2d().length
                    p.is_tri = True

                    p.cross = StraightRoof(p1, (p2 - p0)).sized_normal(0, -1)
                    p.next_cross = left.cross
                    p.last_cross = right.cross
                    right.next_cross = p.cross
                    left.next_cross = p.cross

                    # remove axis seg of tri
                    p.segs[-1].p0 = p0
                    p.segs[-1].p1 = p1
                    p.segs[2].p0 = p2
                    p.segs[2].p1 = p0
                    p.segs[1].p1 = p2
                    p.segs[1].p0 = p1
                    p.segs[1].type = 'LINK_HIP'
                    p.segs[-1].type = 'LINK_HIP'
                    p.segs.pop(0)
                    # adjust left and side borders
                    s0.p1 = p0
                    s1.p0 = p0
                    s2.p0 = p2
                    s3.p1 = p2
                    s0.type = 'LINK_HIP'
                    s2.type = 'LINK_HIP'
                    self.pans.append(p)

                elif not self.is_t_child:
                    # no triangular part with t_child
                    # on "node" parent roof side
                    left = node.root.left
                    right = node.root.right
                    left.node_tri = True
                    right.node_tri = True
                    s0 = right.segs[1]
                    s1 = right.segs[2]
                    s2 = left.segs[-1]
                    s3 = left.segs[2]
                    p0 = s1.lerp(-right.width / s1.length)
                    p1 = s0.p0
                    p2 = s3.lerp(1 + left.width / s3.length)

                    # compute axis and slope from points
                    p3 = p0.to_3d()
                    p3.z = -right.width * right.slope
                    p4 = p1.to_3d()
                    p5 = p2.to_3d()
                    p5.z = -left.width * left.slope
                    n = (p3 - p4).normalized().cross((p5 - p4).normalized())
                    v = n.cross(Vector((0, 0, 1)))
                    dz = n.cross(v)

                    s = StraightRoof(p1, v)
                    p = RoofPolygon(s, 'RIGHT')
                    p.make_segments()
                    p.slope = -dz.z / dz.to_2d().length
                    p.is_tri = True

                    p.cross = StraightRoof(p1, (p2 - p0)).sized_normal(0, -1)
                    p.next_cross = right.cross
                    p.last_cross = left.cross
                    right.last_cross = p.cross
                    left.last_cross = p.cross

                    # remove axis seg of tri
                    p.segs[-1].p0 = p0
                    p.segs[-1].p1 = p1
                    p.segs[2].p0 = p2
                    p.segs[2].p1 = p0
                    p.segs[1].p1 = p2
                    p.segs[1].p0 = p1
                    p.segs[1].type = 'LINK_HIP'
                    p.segs[-1].type = 'LINK_HIP'
                    p.segs.pop(0)
                    # adjust left and side borders
                    s0.p1 = p0
                    s1.p0 = p0
                    s2.p0 = p2
                    s3.p1 = p2
                    s0.type = 'LINK_HIP'
                    s2.type = 'LINK_HIP'
                    self.pans.append(p)

        # make flat array
        for pan in pans:
            self.pans.extend([pan.left, pan.right])

        # merge contiguous with 0 angle diff
        to_remove = []
        for i, pan in enumerate(self.pans):
            if pan.backward:
                next = pan.last
                if next is not None:
                    # same side only can merge
                    if next.side == pan.side:
                        if round(next._axis.delta_angle(pan._axis), 4) == 0:
                            to_remove.append(i)
                            next.next = pan.next
                            next.last_cross = pan.last_cross
                            next.node_tri = pan.node_tri

                            next.slope = pan.slope
                            if pan.side == 'RIGHT':
                                if next.backward:
                                    next._axis.p1 = pan._axis.p1
                                    next.segs[1] = pan.segs[1]
                                    next.segs[2].p0 = pan.segs[2].p0
                                else:
                                    next._axis.p0 = pan._axis.p0
                                    next.segs[-1] = pan.segs[-1]
                                    next.segs[2].p1 = pan.segs[2].p1
                            else:
                                if next.backward:
                                    next._axis.p0 = pan._axis.p0
                                    next.segs[-1] = pan.segs[-1]
                                    next.segs[2].p1 = pan.segs[2].p1
                                else:
                                    next._axis.p1 = pan._axis.p1
                                    next.segs[1] = pan.segs[1]
                                    next.segs[2].p0 = pan.segs[2].p0
            else:
                next = pan.next
                if next is not None:
                    # same side only can merge
                    if next.side == pan.side:
                        if round(next._axis.delta_angle(pan._axis), 4) == 0:
                            to_remove.append(i)
                            next.last = pan.last
                            next.last_cross = pan.last_cross
                            next.node_tri = pan.node_tri

                            next.slope = pan.slope
                            if pan.side == 'LEFT':
                                if next.backward:
                                    next._axis.p1 = pan._axis.p1
                                    next.segs[1] = pan.segs[1]
                                    next.segs[2].p0 = pan.segs[2].p0
                                else:
                                    next._axis.p0 = pan._axis.p0
                                    next.segs[-1] = pan.segs[-1]
                                    next.segs[2].p1 = pan.segs[2].p1
                            else:
                                if next.backward:
                                    next._axis.p0 = pan._axis.p0
                                    next.segs[-1] = pan.segs[-1]
                                    next.segs[2].p1 = pan.segs[2].p1
                                else:
                                    next._axis.p1 = pan._axis.p1
                                    next.segs[1] = pan.segs[1]
                                    next.segs[2].p0 = pan.segs[2].p0

        for i in reversed(to_remove):
            self.pans.pop(i)

        # compute limits
        for pan in self.pans:
            pan.limits()

        """
        for pan in self.pans:
            if pan.last is None:
                pan.as_string()
        """
        return

    def lambris(self, context, o, d):

        idmat = 0
        lambris_height = 0.02
        alt = self.z - lambris_height
        for pan in self.pans:

            verts = []
            faces = []
            matids = []
            uvs = []

            f = len(verts)
            verts.extend([(s.p0.x, s.p0.y, alt + pan.altitude(s.p0)) for s in pan.segs])
            uvs.append([pan.uv(s.p0) for s in pan.segs])
            n_segs = len(pan.segs)
            face = [f + i for i in range(n_segs)]
            faces.append(face)
            matids.append(idmat)

            bm = bmed.buildmesh(
                context, o, verts, faces, matids=matids, uvs=uvs,
                weld=False, clean=False, auto_smooth=True, temporary=True)

            self.cut_holes(bm, pan)

            bmesh.ops.dissolve_limit(bm,
                        angle_limit=0.01,
                        use_dissolve_boundaries=False,
                        verts=bm.verts,
                        edges=bm.edges,
                        delimit={'MATERIAL'})

            geom = bm.faces[:]
            verts = bm.verts[:]
            bmesh.ops.solidify(bm, geom=geom, thickness=0.0001)
            bmesh.ops.translate(bm, vec=Vector((0, 0, lambris_height)), space=o.matrix_world, verts=verts)

            # merge with object
            bmed.bmesh_join(context, o, [bm], normal_update=True)

        bpy.ops.object.mode_set(mode='OBJECT')

    def couverture(self, context, o, d):

        idmat = 7
        rand = 3
        ttl = len(self.pans)
        if ttl < 1:
            return

        sx, sy, sz = d.tile_size_x, d.tile_size_y, d.tile_size_z

        """
        /* Bevel offset_type slot values */
        enum {
          BEVEL_AMT_OFFSET,
          BEVEL_AMT_WIDTH,
          BEVEL_AMT_DEPTH,
          BEVEL_AMT_PERCENT
        };
        """
        offset_type = 'PERCENT'

        if d.tile_offset > 0:
            offset = - d.tile_offset / 100
        else:
            offset = 0

        if d.tile_model == 'BRAAS2':
            t_pts = [Vector(p) for p in [
                (0.06, -1.0, 1.0), (0.19, -1.0, 0.5), (0.31, -1.0, 0.5), (0.44, -1.0, 1.0),
                (0.56, -1.0, 1.0), (0.69, -1.0, 0.5), (0.81, -1.0, 0.5), (0.94, -1.0, 1.0),
                (0.06, 0.0, 0.5), (0.19, 0.0, 0.0), (0.31, 0.0, 0.0), (0.44, 0.0, 0.5),
                (0.56, 0.0, 0.5), (0.69, 0.0, 0.0), (0.81, 0.0, 0.0), (0.94, 0.0, 0.5),
                (-0.0, -1.0, 1.0), (-0.0, 0.0, 0.5), (1.0, -1.0, 1.0), (1.0, 0.0, 0.5)]]
            t_faces = [
                (16, 0, 8, 17), (0, 1, 9, 8), (1, 2, 10, 9), (2, 3, 11, 10),
                (3, 4, 12, 11), (4, 5, 13, 12), (5, 6, 14, 13), (6, 7, 15, 14), (7, 18, 19, 15)]
        elif d.tile_model == 'BRAAS1':
            t_pts = [Vector(p) for p in [
                (0.1, -1.0, 1.0), (0.2, -1.0, 0.5), (0.6, -1.0, 0.5), (0.7, -1.0, 1.0),
                (0.1, 0.0, 0.5), (0.2, 0.0, 0.0), (0.6, 0.0, 0.0), (0.7, 0.0, 0.5),
                (-0.0, -1.0, 1.0), (-0.0, 0.0, 0.5), (1.0, -1.0, 1.0), (1.0, 0.0, 0.5)]]
            t_faces = [(8, 0, 4, 9), (0, 1, 5, 4), (1, 2, 6, 5), (2, 3, 7, 6), (3, 10, 11, 7)]
        elif d.tile_model == 'ETERNIT':
            t_pts = [Vector(p) for p in [
                (0.11, -1.0, 1.0), (0.9, -1.0, 1.0), (0.0, -0.79, 0.79),
                (1.0, -0.79, 0.79), (0.0, 2.0, -2.0), (1.0, 2.0, -2.0)]]
            t_faces = [(0, 1, 3, 5, 4, 2)]
        elif d.tile_model == 'ONDULEE':
            t_pts = [Vector(p) for p in [
                (0.0, -1.0, 0.1), (0.05, -1.0, 1.0), (0.1, -1.0, 0.1),
                (0.15, -1.0, 1.0), (0.2, -1.0, 0.1), (0.25, -1.0, 1.0),
                (0.3, -1.0, 0.1), (0.35, -1.0, 1.0), (0.4, -1.0, 0.1),
                (0.45, -1.0, 1.0), (0.5, -1.0, 0.1), (0.55, -1.0, 1.0),
                (0.6, -1.0, 0.1), (0.65, -1.0, 1.0), (0.7, -1.0, 0.1),
                (0.75, -1.0, 1.0), (0.8, -1.0, 0.1), (0.85, -1.0, 1.0),
                (0.9, -1.0, 0.1), (0.95, -1.0, 1.0), (1.0, -1.0, 0.1),
                (0.0, 0.0, 0.0), (0.05, 0.0, 0.9), (0.1, 0.0, 0.0),
                (0.15, 0.0, 0.9), (0.2, 0.0, 0.0), (0.25, 0.0, 0.9),
                (0.3, 0.0, 0.0), (0.35, 0.0, 0.9), (0.4, 0.0, 0.0),
                (0.45, 0.0, 0.9), (0.5, 0.0, 0.0), (0.55, 0.0, 0.9),
                (0.6, 0.0, 0.0), (0.65, 0.0, 0.9), (0.7, 0.0, 0.0),
                (0.75, 0.0, 0.9), (0.8, 0.0, 0.0), (0.85, 0.0, 0.9),
                (0.9, 0.0, 0.0), (0.95, 0.0, 0.9), (1.0, 0.0, 0.0)]]
            t_faces = [
                (0, 1, 22, 21), (1, 2, 23, 22), (2, 3, 24, 23),
                (3, 4, 25, 24), (4, 5, 26, 25), (5, 6, 27, 26),
                (6, 7, 28, 27), (7, 8, 29, 28), (8, 9, 30, 29),
                (9, 10, 31, 30), (10, 11, 32, 31), (11, 12, 33, 32),
                (12, 13, 34, 33), (13, 14, 35, 34), (14, 15, 36, 35),
                (15, 16, 37, 36), (16, 17, 38, 37), (17, 18, 39, 38),
                (18, 19, 40, 39), (19, 20, 41, 40)]
        elif d.tile_model == 'METAL':
            t_pts = [Vector(p) for p in [
                (0.0, -1.0, 0.0), (0.99, -1.0, 0.0), (1.0, -1.0, 0.0),
                (0.0, 0.0, 0.0), (0.99, 0.0, 0.0), (1.0, 0.0, 0.0),
                (0.99, -1.0, 1.0), (1.0, -1.0, 1.0), (1.0, 0.0, 1.0), (0.99, 0.0, 1.0)]]
            t_faces = [(0, 1, 4, 3), (7, 2, 5, 8), (1, 6, 9, 4), (6, 7, 8, 9)]
        elif d.tile_model == 'LAUZE':
            t_pts = [Vector(p) for p in [
                (0.75, -0.8, 0.8), (0.5, -1.0, 1.0), (0.25, -0.8, 0.8),
                (0.0, -0.5, 0.5), (1.0, -0.5, 0.5), (0.0, 0.5, -0.5), (1.0, 0.5, -0.5)]]
            t_faces = [(1, 0, 4, 6, 5, 3, 2)]
        elif d.tile_model == 'PLACEHOLDER':
            t_pts = [Vector(p) for p in [(0.0, -1.0, 1.0), (1.0, -1.0, 1.0), (0.0, 0.0, 0.0), (1.0, 0.0, 0.0)]]
            t_faces = [(0, 1, 3, 2)]
        elif d.tile_model == 'ROMAN':
            t_pts = [Vector(p) for p in [
                (0.18, 0.0, 0.3), (0.24, 0.0, 0.58), (0.76, 0.0, 0.58),
                (0.82, 0.0, 0.3), (0.05, -1.0, 0.5), (0.14, -1.0, 0.8),
                (0.86, -1.0, 0.8), (0.95, -1.0, 0.5), (0.45, 0.0, 0.5),
                (0.36, 0.0, 0.2), (-0.36, 0.0, 0.2), (-0.45, -0.0, 0.5),
                (0.32, -1.0, 0.7), (0.26, -1.0, 0.42), (-0.26, -1.0, 0.42),
                (-0.32, -1.0, 0.7), (0.5, 0.0, 0.74), (0.5, -1.0, 1.0),
                (-0.0, -1.0, 0.26), (-0.0, 0.0, 0.0)]
            ]
            t_faces = [
                (0, 4, 5, 1), (16, 17, 6, 2), (2, 6, 7, 3),
                (13, 12, 8, 9), (18, 13, 9, 19), (15, 14, 10, 11),
                (14, 18, 19, 10), (1, 5, 17, 16)
            ]
        elif d.tile_model == 'ROUND':
            t_pts = [Vector(p) for p in [
                (0.0, -0.5, 0.5), (1.0, -0.5, 0.5), (0.0, 0.0, 0.0),
                (1.0, 0.0, 0.0), (0.93, -0.71, 0.71), (0.78, -0.88, 0.88),
                (0.39, -0.97, 0.97), (0.61, -0.97, 0.97), (0.07, -0.71, 0.71),
                (0.22, -0.88, 0.88)]
            ]
            t_faces = [(6, 7, 5, 4, 1, 3, 2, 0, 8, 9)]
        else:
            return

        n_faces = len(t_faces)
        t_uvs = [[(t_pts[i].x, t_pts[i].y) for i in f] for f in t_faces]

        dx, dy = d.tile_space_x, d.tile_space_y

        step = 100 / ttl

        # if d.quick_edit:
        #    context.scene.archipack_progress_text = "Build tiles:"

        for i, pan in enumerate(self.pans):

            seg = pan.fake_axis
            # compute base matrix top left of face
            vx = pan.vx
            vy = pan.vy
            vz = pan.vz

            x0, y0 = seg.lerp(pan.tmax)
            z0 = self.z + d.tile_altitude
            ysize_2d = (d.tile_border + pan.ysize)
            space_x = pan.xsize + 2 * d.tile_side
            space_y = ysize_2d * sqrt(1 + pan.slope * pan.slope)
            n_x = 1 + int(space_x / dx)
            n_y = 1 + int(space_y / dy)

            if d.tile_fit_x:
                dx = space_x / n_x

            if d.tile_fit_y:
                dy = space_y / n_y

            if d.tile_alternate:
                n_y += 1

            tM = Matrix([
                [vx.x, vy.x, vz.x, x0],
                [vx.y, vy.y, vz.y, y0],
                [vx.z, vy.z, vz.z, z0],
                [0, 0, 0, 1]
            ])

            verts = []
            faces = []
            matids = []
            uvs = []

            # steps for this pan
            substep = step / n_y
            # print("step:%s sub:%s" % (step, substep))

            for k in range(n_y):

                progress = step * i + substep * k
                # print("progress %s" % (progress))
                # if d.quick_edit:
                #    context.scene.archipack_progress = progress

                y = k * dy

                x0 = offset * dx - d.tile_side
                nx = n_x

                if d.tile_alternate and k % 2 == 1:
                    x0 -= 0.5 * dx
                    nx += 1

                if d.tile_offset > 0:
                    nx += 1

                for j in range(nx):
                    x = x0 + j * dx
                    lM = tM @ Matrix([
                        [sx, 0, 0, x],
                        [0, sy, 0, -y],
                        [0, 0, sz, 0],
                        [0, 0, 0, 1]
                    ])

                    v = len(verts)

                    verts.extend([lM @ p for p in t_pts])
                    faces.extend([tuple(i + v for i in f) for f in t_faces])
                    mid = randint(idmat, idmat + rand)
                    t_mats = [mid for i in range(n_faces)]
                    matids.extend(t_mats)
                    uvs.extend(t_uvs)

            # build temp bmesh and bissect
            bm = bmed.buildmesh(
                context, o, verts, faces, matids=matids, uvs=uvs,
                weld=False, clean=False, auto_smooth=True, temporary=True)

            # clean outer on convex parts
            # pan.convex = False
            remove = pan.convex

            for s in pan.segs:
                # seg without length lead to invalid normal
                if s.length > 0:
                    if s.type == 'AXIS':
                        self.bissect(bm, s.p1.to_3d(), s.cross_z.to_3d(), clear_outer=remove)
                    elif s.type == 'BOTTOM':
                        s0 = s.offset(d.tile_border)
                        dz = pan.altitude(s0.p0)
                        vx = s0.v.to_3d()
                        vx.z = pan.altitude(s0.p1) - dz
                        vy = vz.cross(vx.normalized())
                        x, y = s0.p0
                        z = z0 + dz
                        self.bissect(bm, Vector((x, y, z)), -vy, clear_outer=remove)
                    elif s.type == 'SIDE':
                        p0 = s.p0 + s.cross_z.normalized() * d.tile_side
                        self.bissect(bm, p0.to_3d(), s.cross_z.to_3d(), clear_outer=remove)
                    elif s.type == 'LINK_VALLEY':
                        p0 = s.p0 - s.cross_z.normalized() * d.tile_couloir
                        self.bissect(bm, p0.to_3d(), s.cross_z.to_3d(), clear_outer=remove)
                    elif s.type in {'LINK_HIP', 'LINK'}:
                        self.bissect(bm, s.p0.to_3d(), s.cross_z.to_3d(), clear_outer=remove)

            # when not convex, select and remove outer parts
            if not pan.convex:
                """
                /* del "context" slot values, used for operator too */
                enum {
                    DEL_VERTS = 1,
                    DEL_EDGES,
                    DEL_ONLYFACES,
                    DEL_EDGESFACES,
                    DEL_FACES,
                    /* A version of 'DEL_FACES' that keeps edges on face boundaries,
                     * allowing the surrounding edge-loop to be kept from removed face regions. */
                    DEL_FACES_KEEP_BOUNDARY,
                    DEL_ONLYTAGGED
                };
                """
                # Build boundary including borders and bottom offsets
                new_s = None
                segs = []
                for s in pan.segs:
                    if s.length > 0:
                        if s.type == 'LINK_VALLEY':
                            offset = -d.tile_couloir
                        elif s.type == 'BOTTOM':
                            offset = d.tile_border
                        elif s.type == 'SIDE':
                            offset = d.tile_side
                        else:
                            offset = 0
                        new_s = s.make_offset(offset, new_s)
                        segs.append(new_s)

                if len(segs) > 0:
                    # last / first intersection
                    res, p, t = segs[0].intersect(segs[-1])
                    if res:
                        segs[0].p0 = p
                        segs[-1].p1 = p
                    f_geom = [f for f in bm.faces if not pan.inside(f.calc_center_median().to_2d(), segs)]
                    if len(f_geom) > 0:
                        bmesh.ops.delete(bm, geom=f_geom, context="FACES")

            self.cut_holes(bm, pan)

            bmesh.ops.dissolve_limit(bm,
                        angle_limit=0.01,
                        use_dissolve_boundaries=False,
                        verts=bm.verts[:],
                        edges=bm.edges[:],
                        delimit={'MATERIAL'})

            if d.tile_bevel:
                geom = bm.verts[:]
                geom.extend(bm.edges[:])
                bmesh.ops.bevel(bm,
                    geom=geom,
                    offset=d.tile_bevel_amt,
                    offset_type=offset_type,
                    segments=d.tile_bevel_segs,
                    profile=0.5,
                    # vertex_only=False,
                    clamp_overlap=True,
                    material=-1)

            if d.tile_solidify:
                geom = bm.faces[:]
                verts = bm.verts[:]
                bmesh.ops.solidify(bm, geom=geom, thickness=0.0001)
                bmesh.ops.translate(bm, vec=vz * d.tile_height, space=o.matrix_world, verts=verts)

            # merge with object
            bmed.bmesh_join(context, o, [bm], normal_update=True)
            bpy.ops.object.mode_set(mode='OBJECT')

        # if d.quick_edit:
        #    context.scene.archipack_progress = -1

    def _bargeboard(self, s, i, boundary, pan,
            width, height, altitude, offset, idmat,
            verts, faces, edges, matids, uvs):

        f = len(verts)

        s0 = s.offset(offset - width)
        s1 = s.offset(offset)

        p0 = s0.p0
        p1 = s1.p0
        p2 = s0.p1
        p3 = s1.p1

        s2 = boundary.last_seg(i)
        s3 = boundary.next_seg(i)

        if s2.type == 'SIDE':
            # intersect last seg offset
            s4 = s2.offset(offset - width)
            s5 = s2.offset(offset)
            res, p, t = s4.intersect(s0)
            if res:
                p0 = p
            res, p, t = s5.intersect(s1)
            if res:
                p1 = p

        elif s2.type == 'AXIS' or 'LINK' in s2.type:
            # intersect axis or link seg
            res, p, t = s2.intersect(s0)
            if res:
                p0 = p
            res, p, t = s2.intersect(s1)
            if res:
                p1 = p

        if s3.type == 'SIDE':
            # intersect next seg offset
            s4 = s3.offset(offset - width)
            s5 = s3.offset(offset)
            res, p, t = s4.intersect(s0)
            if res:
                p2 = p
            res, p, t = s5.intersect(s1)
            if res:
                p3 = p

        elif s3.type == 'AXIS' or 'LINK' in s3.type:
            # intersect axis or link seg
            res, p, t = s3.intersect(s0)
            if res:
                p2 = p
            res, p, t = s3.intersect(s1)
            if res:
                p3 = p

        x0, y0 = p0
        x1, y1 = p1
        x2, y2 = p3
        x3, y3 = p2

        z0 = self.z + altitude + pan.altitude(p0)
        z1 = self.z + altitude + pan.altitude(p1)
        z2 = self.z + altitude + pan.altitude(p3)
        z3 = self.z + altitude + pan.altitude(p2)

        verts.extend([
            (x0, y0, z0),
            (x1, y1, z1),
            (x2, y2, z2),
            (x3, y3, z3),
        ])
        z0 -= height
        z1 -= height
        z2 -= height
        z3 -= height
        verts.extend([
            (x0, y0, z0),
            (x1, y1, z1),
            (x2, y2, z2),
            (x3, y3, z3),
        ])

        faces.extend([
            # top
            (f, f + 1, f + 2, f + 3),
            # sides
            (f, f + 4, f + 5, f + 1),
            (f + 1, f + 5, f + 6, f + 2),
            (f + 2, f + 6, f + 7, f + 3),
            (f + 3, f + 7, f + 4, f),
            # bottom
            (f + 4, f + 7, f + 6, f + 5)
        ])
        edges.append([f, f + 3])
        edges.append([f + 1, f + 2])
        edges.append([f + 4, f + 7])
        edges.append([f + 5, f + 6])

        matids.extend([idmat, idmat, idmat, idmat, idmat, idmat])
        uvs.extend([
            [(0, 0), (0, 1), (1, 1), (1, 0)],
            [(0, 0), (0, 1), (1, 1), (1, 0)],
            [(0, 0), (0, 1), (1, 1), (1, 0)],
            [(0, 0), (0, 1), (1, 1), (1, 0)],
            [(0, 0), (0, 1), (1, 1), (1, 0)],
            [(0, 0), (0, 1), (1, 1), (1, 0)]
        ])

    def bargeboard(self, d, verts, faces, edges, matids, uvs):

        #####################
        # Vire-vents
        #####################

        idmat = 1
        for pan in self.pans:

            for hole in pan.holes:
                for i, s in enumerate(hole.segs):
                    if s.type == 'SIDE':
                        self._bargeboard(s,
                            i,
                            hole, pan,
                            d.bargeboard_width,
                            d.bargeboard_height,
                            d.bargeboard_altitude,
                            d.bargeboard_offset,
                            idmat,
                            verts,
                            faces,
                            edges,
                            matids,
                            uvs)

            for i, s in enumerate(pan.segs):
                if s.type == 'SIDE':
                    self._bargeboard(s,
                        i,
                        pan, pan,
                        d.bargeboard_width,
                        d.bargeboard_height,
                        d.bargeboard_altitude,
                        d.bargeboard_offset,
                        idmat,
                        verts,
                        faces,
                        edges,
                        matids,
                        uvs)

    def _fascia(self, s, i, boundary, pan, tri_0, tri_1,
            width, height, altitude, offset, idmat,
            verts, faces, edges, matids, uvs):

        f = len(verts)
        s0 = s.offset(offset)
        s1 = s.offset(offset + width)

        s2 = boundary.last_seg(i)
        s3 = boundary.next_seg(i)
        s4 = s2
        s5 = s3

        p0 = s0.p0
        p1 = s1.p0
        p2 = s0.p1
        p3 = s1.p1

        # find last neighbor depending on type
        if s2.type == 'AXIS' or 'LINK' in s2.type:
            # apply only on boundaries
            if not s.is_hole:
                # use last axis
                if pan.side == 'LEFT':
                    s6 = pan.next_cross
                else:
                    s6 = pan.last_cross
                if tri_0:
                    s2 = s.copy
                else:
                    s2 = s2.oposite
                s2.v = (s.sized_normal(0, 1).v + s6.v).normalized()
                s4 = s2

        elif s2.type == 'SIDE':
            s2 = s.copy
            s2.type = 'SIDE'
            s2.v = s.sized_normal(0, 1).v
            s4 = s2
        else:
            s2 = s2.offset(offset)
            s4 = s2.offset(offset + width)

        # find next neighbor depending on type
        if s3.type == 'AXIS' or 'LINK' in s3.type:
            if not s.is_hole:
                # use last axis
                if pan.side == 'LEFT':
                    s6 = pan.last_cross
                else:
                    s6 = pan.next_cross
                if tri_1:
                    s3 = s.oposite
                else:
                    s3 = s3.copy
                s3.v = (s.sized_normal(0, 1).v + s6.v).normalized()
                s5 = s3
        elif s3.type == 'SIDE':
            # when next is side, use perpendicular
            s3 = s.oposite
            s3.type = 'SIDE'
            s3.v = s.sized_normal(0, 1).v
            s5 = s3
        else:
            s3 = s3.offset(offset)
            s5 = s3.offset(offset + width)

        # units vectors and scale
        # is unit normal on sides
        # print("s.p:%s, s.v:%s s1.p::%s s1.v::%s" % (s.p, s.v, s1.p, s1.v))
        res, p, t = s0.intersect(s2)
        if res:
            p0 = p
        res, p, t = s0.intersect(s3)
        if res:
            p1 = p
        res, p, t = s1.intersect(s4)
        if res:
            p2 = p
        res, p, t = s1.intersect(s5)
        if res:
            p3 = p

        x0, y0 = p0
        x1, y1 = p2
        x2, y2 = p3
        x3, y3 = p1

        z0 = self.z + altitude + pan.altitude(p0)
        z1 = self.z + altitude + pan.altitude(p2)
        z2 = self.z + altitude + pan.altitude(p3)
        z3 = self.z + altitude + pan.altitude(p1)

        verts.extend([
            (x0, y0, z0),
            (x1, y1, z1),
            (x2, y2, z2),
            (x3, y3, z3),
        ])

        z0 -= height
        z1 -= height
        z2 -= height
        z3 -= height
        verts.extend([
            (x0, y0, z0),
            (x1, y1, z1),
            (x2, y2, z2),
            (x3, y3, z3),
        ])

        faces.extend([
            # top
            (f, f + 1, f + 2, f + 3),
            # sides
            (f, f + 4, f + 5, f + 1),
            (f + 1, f + 5, f + 6, f + 2),
            (f + 2, f + 6, f + 7, f + 3),
            (f + 3, f + 7, f + 4, f),
            # bottom
            (f + 4, f + 7, f + 6, f + 5)
        ])
        edges.append([f, f + 3])
        edges.append([f + 1, f + 2])
        edges.append([f + 4, f + 7])
        edges.append([f + 5, f + 6])
        matids.extend([idmat, idmat, idmat, idmat, idmat, idmat])
        uvs.extend([
            [(0, 0), (0, 1), (1, 1), (1, 0)],
            [(0, 0), (0, 1), (1, 1), (1, 0)],
            [(0, 0), (0, 1), (1, 1), (1, 0)],
            [(0, 0), (0, 1), (1, 1), (1, 0)],
            [(0, 0), (0, 1), (1, 1), (1, 0)],
            [(0, 0), (0, 1), (1, 1), (1, 0)]
        ])

    def fascia(self, d, verts, faces, edges, matids, uvs):

        #####################
        # Larmiers
        #####################

        idmat = 2
        for pan in self.pans:

            for hole in pan.holes:
                for i, s in enumerate(hole.segs):
                    if s.type == 'BOTTOM':
                        self._fascia(s,
                            i,
                            hole, pan,
                            False, False,
                            d.fascia_width,
                            d.fascia_height,
                            d.fascia_altitude,
                            d.fascia_offset,
                            idmat,
                            verts,
                            faces,
                            edges,
                            matids,
                            uvs)

            for i, s in enumerate(pan.segs):
                if s.type == 'BOTTOM':

                    tri_0 = pan.node_tri
                    tri_1 = pan.next_tri

                    # triangular ends apply on boundary only
                    # unless cut, boundary is parallel to axis
                    # except for triangular ends
                    if pan.side == 'LEFT':
                        tri_0, tri_1 = tri_1, tri_0

                    self._fascia(s,
                        i,
                        pan, pan,
                        tri_0, tri_1,
                        d.fascia_width,
                        d.fascia_height,
                        d.fascia_altitude,
                        d.fascia_offset,
                        idmat,
                        verts,
                        faces,
                        edges,
                        matids,
                        uvs)

                    continue

                    f = len(verts)
                    s0 = s.offset(d.fascia_width)

                    s1 = pan.last_seg(i)
                    s2 = pan.next_seg(i)

                    # triangular ends apply on boundary only
                    # unless cut, boundary is parallel to axis
                    # except for triangular ends

                    tri_0 = (pan.node_tri and not s.is_hole) or pan.is_tri
                    tri_1 = (pan.next_tri and not s.is_hole) or pan.is_tri

                    if pan.side == 'LEFT':
                        tri_0, tri_1 = tri_1, tri_0

                    # tiangular use bottom segment direction
                    # find last neighbor depending on type
                    if s1.type == 'AXIS' or 'LINK' in s1.type:
                        # apply only on boundaries
                        if not s.is_hole:
                            # use last axis
                            if pan.side == 'LEFT':
                                s3 = pan.next_cross
                            else:
                                s3 = pan.last_cross
                            if tri_0:
                                s1 = s.copy
                            else:
                                s1 = s1.oposite
                            s1.v = (s.sized_normal(0, 1).v + s3.v).normalized()
                    elif s1.type == 'SIDE':
                        s1 = s.copy
                        s1.type = 'SIDE'
                        s1.v = s.sized_normal(0, 1).v
                    else:
                        s1 = s1.offset(d.fascia_width)

                    # find next neighbor depending on type
                    if s2.type == 'AXIS' or 'LINK' in s2.type:
                        if not s.is_hole:
                            # use last axis
                            if pan.side == 'LEFT':
                                s3 = pan.last_cross
                            else:
                                s3 = pan.next_cross
                            if tri_1:
                                s2 = s.oposite
                            else:
                                s2 = s2.copy
                            s2.v = (s.sized_normal(0, 1).v + s3.v).normalized()
                    elif s2.type == 'SIDE':
                        s2 = s.oposite
                        s2.type = 'SIDE'
                        s2.v = s.sized_normal(0, 1).v
                    else:

                        s2 = s2.offset(d.fascia_width)

                    # units vectors and scale
                    # is unit normal on sides
                    # print("s.p:%s, s.v:%s s1.p::%s s1.v::%s" % (s.p, s.v, s1.p, s1.v))
                    res, p0, t = s0.intersect(s1)
                    res, p1, t = s0.intersect(s2)

                    x0, y0 = s.p0
                    x1, y1 = p0
                    x2, y2 = p1
                    x3, y3 = s.p1
                    z0 = self.z + d.fascia_altitude + pan.altitude(s.p0)
                    z1 = self.z + d.fascia_altitude + pan.altitude(s.p1)
                    verts.extend([
                        (x0, y0, z0),
                        (x1, y1, z0),
                        (x2, y2, z1),
                        (x3, y3, z1),
                    ])
                    z0 -= d.fascia_height
                    z1 -= d.fascia_height
                    verts.extend([
                        (x0, y0, z0),
                        (x1, y1, z0),
                        (x2, y2, z1),
                        (x3, y3, z1),
                    ])

                    faces.extend([
                        # top
                        (f, f + 1, f + 2, f + 3),
                        # sides
                        (f, f + 4, f + 5, f + 1),
                        (f + 1, f + 5, f + 6, f + 2),
                        (f + 2, f + 6, f + 7, f + 3),
                        (f + 3, f + 7, f + 4, f),
                        # bottom
                        (f + 4, f + 7, f + 6, f + 5)
                    ])
                    edges.append([f, f + 3])
                    edges.append([f + 1, f + 2])
                    edges.append([f + 4, f + 7])
                    edges.append([f + 5, f + 6])
                    matids.extend([idmat, idmat, idmat, idmat, idmat, idmat])
                    uvs.extend([
                        [(0, 0), (0, 1), (1, 1), (1, 0)],
                        [(0, 0), (0, 1), (1, 1), (1, 0)],
                        [(0, 0), (0, 1), (1, 1), (1, 0)],
                        [(0, 0), (0, 1), (1, 1), (1, 0)],
                        [(0, 0), (0, 1), (1, 1), (1, 0)],
                        [(0, 0), (0, 1), (1, 1), (1, 0)]
                    ])

    def gutter(self, d, verts, faces, edges, matids, uvs):

        #####################
        # Chenaux
        #####################

        idmat = 5

        # caps at start and end
        if d.gutter_segs % 2 == 1:
            n_faces = int((d.gutter_segs - 1) / 2)
        else:
            n_faces = int((d.gutter_segs / 2) - 1)

        df = 2 * d.gutter_segs + 1

        for pan in self.pans:
            for i, s in enumerate(pan.segs):

                if s.type == 'BOTTOM':
                    f = len(verts)

                    s0 = s.offset(d.gutter_dist + d.gutter_width)

                    s1 = pan.last_seg(i)
                    s2 = pan.next_seg(i)

                    p0 = s0.p0
                    p1 = s0.p1

                    tri_0 = pan.node_tri or pan.is_tri
                    tri_1 = pan.next_tri or pan.is_tri

                    if pan.side == 'LEFT':
                        tri_0, tri_1 = tri_1, tri_0

                    f = len(verts)

                    # tiangular use segment direction
                    # find last neighbor depending on type
                    if s1.type == 'AXIS' or 'LINK' in s1.type:
                        # apply only on boundaries
                        if not s.is_hole:
                            # use last axis
                            if pan.side == 'LEFT':
                                s3 = pan.next_cross
                            else:
                                s3 = pan.last_cross
                            if tri_0:
                                s1 = s.copy
                            else:
                                s1 = s1.oposite
                            s1.v = (s.sized_normal(0, 1).v + s3.v).normalized()
                    elif s1.type == 'SIDE':
                        s1 = s.copy
                        s1.type = 'SIDE'
                        s1.v = s.sized_normal(0, 1).v
                    else:
                        s1 = s1.offset(d.gutter_dist + d.gutter_width)

                    # find next neighbor depending on type
                    if s2.type == 'AXIS' or 'LINK' in s2.type:
                        if not s.is_hole:
                            # use last axis
                            if pan.side == 'LEFT':
                                s3 = pan.last_cross
                            else:
                                s3 = pan.next_cross
                            if tri_1:
                                s2 = s.oposite
                            else:
                                s2 = s2.copy
                            s2.v = (s.sized_normal(0, 1).v + s3.v).normalized()
                    elif s2.type == 'SIDE':
                        s2 = s.oposite
                        s2.type = 'SIDE'
                        s2.v = s.sized_normal(0, 1).v
                    else:
                        s2 = s2.offset(d.gutter_dist + d.gutter_width)

                    # units vectors and scale
                    # is unit normal on sides
                    # print("s.p:%s, s.v:%s s1.p::%s s1.v::%s" % (s.p, s.v, s1.p, s1.v))
                    res, p, t = s0.intersect(s1)
                    if res:
                        p0 = p
                    res, p, t = s0.intersect(s2)
                    if res:
                        p1 = p
                    """
                    f = len(verts)
                    verts.extend([s1.p0.to_3d(), s1.p1.to_3d()])
                    edges.append([f, f + 1])

                    f = len(verts)
                    verts.extend([s2.p0.to_3d(), s2.p1.to_3d()])
                    edges.append([f, f + 1])
                    continue
                    """

                    v0 = p0 - s.p0
                    v1 = p1 - s.p1

                    scale_0 = v0.length / (d.gutter_dist + d.gutter_width)
                    scale_1 = v1.length / (d.gutter_dist + d.gutter_width)

                    s3 = Line(s.p0, v0.normalized())
                    s4 = Line(s.p1, v1.normalized())

                    zt = self.z + d.fascia_altitude + pan.altitude(s3.p0)
                    z0 = self.z + d.gutter_alt + pan.altitude(s3.p0)
                    z1 = z0 - 0.5 * d.gutter_width
                    z2 = z1 - 0.5 * d.gutter_width
                    z3 = z1 - 0.5 * d.gutter_boudin
                    dz0 = z2 - z1
                    dz1 = z3 - z1

                    tt = scale_0 * d.fascia_width
                    t0 = scale_0 * d.gutter_dist
                    t1 = t0 + scale_0 * (0.5 * d.gutter_width)
                    t2 = t1 + scale_0 * (0.5 * d.gutter_width)
                    t3 = t2 + scale_0 * (0.5 * d.gutter_boudin)

                    # bord tablette
                    xt, yt = s3.lerp(tt)

                    # bord
                    x0, y0 = s3.lerp(t0)
                    # axe chenaux
                    x1, y1 = s3.lerp(t1)
                    # bord boudin interieur
                    x2, y2 = s3.lerp(t2)
                    # axe boudin
                    x3, y3 = s3.lerp(t3)

                    dx = x0 - x1
                    dy = y0 - y1

                    verts.append((xt, yt, zt))
                    # chenaux
                    da = pi / d.gutter_segs
                    for i in range(d.gutter_segs):
                        sa = sin(i * da)
                        ca = cos(i * da)
                        verts.append((x1 + dx * ca, y1 + dy * ca, z1 + dz0 * sa))

                    dx = x2 - x3
                    dy = y2 - y3

                    # boudin
                    da = -pi / (0.75 * d.gutter_segs)
                    for i in range(d.gutter_segs):
                        sa = sin(i * da)
                        ca = cos(i * da)
                        verts.append((x3 + dx * ca, y3 + dy * ca, z1 + dz1 * sa))

                    zt = self.z + d.fascia_altitude + pan.altitude(s4.p0)
                    z0 = self.z + d.gutter_alt + pan.altitude(s4.p0)
                    z1 = z0 - 0.5 * d.gutter_width
                    z2 = z1 - 0.5 * d.gutter_width
                    z3 = z1 - 0.5 * d.gutter_boudin
                    dz0 = z2 - z1
                    dz1 = z3 - z1
                    tt = scale_1 * d.fascia_width
                    t0 = scale_1 * d.gutter_dist
                    t1 = t0 + scale_1 * (0.5 * d.gutter_width)
                    t2 = t1 + scale_1 * (0.5 * d.gutter_width)
                    t3 = t2 + scale_1 * (0.5 * d.gutter_boudin)

                    # bord tablette
                    xt, yt = s4.lerp(tt)

                    # bord
                    x0, y0 = s4.lerp(t0)
                    # axe chenaux
                    x1, y1 = s4.lerp(t1)
                    # bord boudin interieur
                    x2, y2 = s4.lerp(t2)
                    # axe boudin
                    x3, y3 = s4.lerp(t3)

                    dx = x0 - x1
                    dy = y0 - y1

                    # tablette
                    verts.append((xt, yt, zt))
                    faces.append((f + df, f, f + 1, f + df + 1))
                    uvs.append([(0, 0), (1, 0), (1, 1), (0, 1)])
                    matids.append(idmat)

                    # chenaux
                    da = pi / d.gutter_segs
                    for i in range(d.gutter_segs):
                        sa = sin(i * da)
                        ca = cos(i * da)
                        verts.append((x1 + dx * ca, y1 + dy * ca, z1 + dz0 * sa))

                    dx = x2 - x3
                    dy = y2 - y3

                    # boudin
                    da = -pi / (0.75 * d.gutter_segs)
                    for i in range(d.gutter_segs):
                        sa = sin(i * da)
                        ca = cos(i * da)
                        verts.append((x3 + dx * ca, y3 + dy * ca, z1 + dz1 * sa))

                    df = 2 * d.gutter_segs + 1

                    for i in range(1, 2 * d.gutter_segs):
                        j = i + f
                        faces.append((j, j + df, j + df + 1, j + 1))
                        uvs.append([(0, 0), (1, 0), (1, 1), (0, 1)])
                        matids.append(idmat)

                    """
                            segs = 6

                            n_faces = segs / 2 - 1

                                0           6
                                 1         5
                                   2     4
                                      3
                    """
                    # close start
                    if s1.type == 'SIDE':

                        if d.gutter_segs % 2 == 0:
                            faces.append((f + n_faces + 3, f + n_faces + 1, f + n_faces + 2))
                            uvs.append([(0, 0), (1, 0), (0.5, -0.5)])
                            matids.append(idmat)

                        for i in range(n_faces):

                            j = i + f + 1
                            k = f + d.gutter_segs - i
                            faces.append((j + 1, k, k + 1, j))
                            uvs.append([(0, 0), (1, 0), (1, 1), (0, 1)])
                            matids.append(idmat)

                    # close end
                    if s2.type == 'SIDE':

                        f += 2 * d.gutter_segs + 1

                        if d.gutter_segs % 2 == 0:
                            faces.append((f + n_faces + 1, f + n_faces + 3, f + n_faces + 2))
                            uvs.append([(0, 0), (1, 0), (0.5, -0.5)])
                            matids.append(idmat)

                        for i in range(n_faces):

                            j = i + f + 1
                            k = f + d.gutter_segs - i
                            faces.append((j, k + 1, k, j + 1))
                            uvs.append([(0, 0), (1, 0), (1, 1), (0, 1)])
                            matids.append(idmat)

    def beam_primary(self, d, verts, faces, edges, matids, uvs):

        idmat = 3

        for pan in self.pans:
            for i, s in enumerate(pan.segs):

                if s.type == 'AXIS':

                    ####################
                    # Poutre Faitiere
                    ####################

                    """
                     1___________________2   left
                    0|___________________|3  axis
                     |___________________|   right
                     5                   4
                    """
                    f = len(verts)

                    s2 = s.offset(-0.5 * d.beam_width)

                    # offset from roof border
                    s0 = pan.last_seg(i)
                    s1 = pan.next_seg(i)
                    t0 = 0
                    t1 = 1

                    s0_tri = pan.next_tri
                    s1_tri = pan.node_tri

                    if pan.side == 'LEFT':
                        s0_tri, s1_tri = s1_tri, s0_tri

                    if s0.type == 'SIDE' and s.length > 0:
                        s0 = s0.offset(d.beam_offset)
                        t0 = -d.beam_offset / s.length

                    if s0_tri:
                        p0 = s2.p0
                        t0 = 0
                    else:
                        res, p0, t = s2.intersect(s0)
                        if not res:
                            continue

                    if s1.type == 'SIDE' and s.length > 0:
                        s1 = s1.offset(d.beam_offset)
                        t1 = 1 + d.beam_offset / s.length

                    if s1_tri:
                        t1 = 1
                        p1 = s2.p1
                    else:
                        res, p1, t = s2.intersect(s1)
                        if not res:
                            continue

                    x0, y0 = p0
                    x1, y1 = s.lerp(t0)
                    x2, y2 = p1
                    x3, y3 = s.lerp(t1)
                    z0 = self.z + d.beam_alt + pan.altitude(p0)
                    z1 = z0 - d.beam_height
                    z2 = self.z + d.beam_alt + pan.altitude(p1)
                    z3 = z2 - d.beam_height
                    verts.extend([
                        (x0, y0, z0),
                        (x1, y1, z0),
                        (x2, y2, z2),
                        (x3, y3, z2),
                        (x0, y0, z1),
                        (x1, y1, z1),
                        (x2, y2, z3),
                        (x3, y3, z3),
                    ])
                    if s0_tri or s0.type == 'SIDE':
                        faces.append((f + 4, f + 5, f + 1, f))
                        uvs.append([(0, 0), (1, 0), (1, 1), (0, 1)])
                        matids.append(idmat)
                    if s1_tri or s1.type == 'SIDE':
                        faces.append((f + 2, f + 3, f + 7, f + 6))
                        uvs.append([(0, 0), (1, 0), (1, 1), (0, 1)])
                        matids.append(idmat)

                    faces.extend([
                        # internal side
                        # (f + 1, f + 5, f + 7, f + 3),
                        # external side
                        (f + 2, f + 6, f + 4, f),
                        # top
                        (f, f + 1, f + 3, f + 2),
                        # bottom
                        (f + 5, f + 4, f + 6, f + 7)
                    ])
                    matids.extend([
                        idmat, idmat, idmat
                    ])
                    uvs.extend([
                        [(0, 0), (0, 1), (1, 1), (1, 0)],
                        [(0, 0), (0, 1), (1, 1), (1, 0)],
                        [(0, 0), (0, 1), (1, 1), (1, 0)]
                    ])

    def rafter(self, context, o, d):

        idmat = 4

        # Rafters / Chevrons
        start = max(0.001 + 0.5 * d.rafter_width, d.rafter_start)

        holes_offset = -d.rafter_width

        # build temp bmesh and bissect
        for pan in self.pans:
            tmin, tmax, ysize = pan.tmin, pan.tmax, pan.ysize

            # print("tmin:%s tmax:%s ysize:%s" % (tmin, tmax, ysize))

            f = 0

            verts = []
            faces = []
            matids = []
            uvs = []
            alt = d.rafter_alt
            seg = pan.fake_axis

            t0 = tmin + (start - 0.5 * d.rafter_width) / seg.length
            t1 = tmin + (start + 0.5 * d.rafter_width) / seg.length

            tx = start / seg.length
            dt = d.rafter_spacing / seg.length

            n_items = max(1, round((tmax - tmin) / dt, 0))

            dt = ((tmax - tmin) - 2 * tx) / n_items

            for j in range(int(n_items) + 1):
                n0 = seg.sized_normal(t1 + j * dt, - ysize)
                n1 = seg.sized_normal(t0 + j * dt, - ysize)
                f = len(verts)

                z0 = self.z + alt + pan.altitude(n0.p0)
                x0, y0 = n0.p0
                z1 = self.z + alt + pan.altitude(n0.p1)
                x1, y1 = n0.p1
                z2 = self.z + alt + pan.altitude(n1.p0)
                x2, y2 = n1.p0
                z3 = self.z + alt + pan.altitude(n1.p1)
                x3, y3 = n1.p1

                verts.extend([
                    (x0, y0, z0),
                    (x1, y1, z1),
                    (x2, y2, z2),
                    (x3, y3, z3)
                    ])

                faces.append((f + 1, f, f + 2, f + 3))
                matids.append(idmat)
                uvs.append([(0, 0), (1, 0), (1, 1), (0, 1)])

            bm = bmed.buildmesh(
                context, o, verts, faces, matids=matids, uvs=uvs,
                weld=False, clean=False, auto_smooth=True, temporary=True)

            self.cut_boundary(bm, pan)
            self.cut_holes(bm, pan, offset={'DEFAULT': holes_offset})

            bmesh.ops.dissolve_limit(bm,
                        angle_limit=0.01,
                        use_dissolve_boundaries=False,
                        verts=bm.verts,
                        edges=bm.edges,
                        delimit={'MATERIAL'})

            geom = bm.faces[:]
            verts = bm.verts[:]
            bmesh.ops.solidify(bm, geom=geom, thickness=0.0001)
            bmesh.ops.translate(bm, vec=Vector((0, 0, -d.rafter_height)), space=o.matrix_world, verts=verts)
            # uvs for sides
            uvs = [(0, 0), (1, 0), (1, 1), (0, 1)]
            layer = bm.loops.layers.uv.verify()
            for i, face in enumerate(bm.faces):
                if len(face.loops) == 4:
                    for j, loop in enumerate(face.loops):
                        loop[layer].uv = uvs[j]

            # merge with object
            bmed.bmesh_join(context, o, [bm], normal_update=True)

        bpy.ops.object.mode_set(mode='OBJECT')

    def hips(self, d, verts, faces, edges, matids, uvs):

        idmat_valley = 5
        idmat = 6
        idmat_poutre = 4

        sx, sy, sz = d.hip_size_x, d.hip_size_y, d.hip_size_z

        if d.hip_model == 'ROUND':

            # round hips
            t_pts = [Vector((sx * x, sy * y, sz * z)) for x, y, z in [
                (-0.5, 0.34, 0.08), (-0.5, 0.32, 0.19), (0.5, -0.4, -0.5),
                (0.5, 0.4, -0.5), (-0.5, 0.26, 0.28), (-0.5, 0.16, 0.34),
                (-0.5, 0.05, 0.37), (-0.5, -0.05, 0.37), (-0.5, -0.16, 0.34),
                (-0.5, -0.26, 0.28), (-0.5, -0.32, 0.19), (-0.5, -0.34, 0.08),
                (-0.5, -0.25, -0.5), (-0.5, 0.25, -0.5), (0.5, -0.08, 0.5),
                (0.5, -0.5, 0.08), (0.5, -0.24, 0.47), (0.5, -0.38, 0.38),
                (0.5, -0.47, 0.24), (0.5, 0.5, 0.08), (0.5, 0.08, 0.5),
                (0.5, 0.47, 0.24), (0.5, 0.38, 0.38), (0.5, 0.24, 0.47)
            ]]
            t_faces = [
                (23, 22, 4, 5), (3, 19, 21, 22, 23, 20, 14, 16, 17, 18, 15, 2), (14, 20, 6, 7),
                (18, 17, 9, 10), (15, 18, 10, 11), (21, 19, 0, 1), (17, 16, 8, 9),
                (13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 1, 0), (19, 3, 13, 0), (20, 23, 5, 6), (22, 21, 1, 4),
                (3, 2, 12, 13), (2, 15, 11, 12), (16, 14, 7, 8)
            ]
            t_uvs = [
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.5, 1.0), (0.75, 0.93), (0.93, 0.75),
                (1.0, 0.5), (0.93, 0.25), (0.75, 0.07),
                (0.5, 0.0), (0.25, 0.07), (0.07, 0.25),
                (0.0, 0.5), (0.07, 0.75), (0.25, 0.93)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.5, 1.0), (0.75, 0.93), (0.93, 0.75),
                (1.0, 0.5), (0.93, 0.25), (0.75, 0.07),
                (0.5, 0.0), (0.25, 0.07), (0.07, 0.25),
                (0.0, 0.5), (0.07, 0.75), (0.25, 0.93)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)]
            ]
            # affect vertex with slope
            t_left = []
            t_right = []

        elif d.hip_model == 'ETERNIT':

            # square hips "eternit like"
            t_pts = [Vector((sx * x, sy * y, sz * z)) for x, y, z in [
                (0.5, 0.5, 0.0), (-0.5, 0.5, -0.5), (0.5, -0.5, 0.0),
                (-0.5, -0.5, -0.5), (0.5, 0.0, 0.0), (-0.5, -0.0, -0.5),
                (0.5, 0.0, 0.5), (0.5, -0.5, 0.5), (-0.5, -0.5, 0.0),
                (-0.5, -0.0, 0.0), (0.5, 0.5, 0.5), (-0.5, 0.5, 0.0)]
            ]
            t_faces = [
                (4, 2, 3, 5), (0, 4, 5, 1), (6, 9, 8, 7),
                (10, 11, 9, 6), (0, 10, 6, 4), (5, 9, 11, 1),
                (2, 7, 8, 3), (1, 11, 10, 0), (4, 6, 7, 2), (3, 8, 9, 5)
                ]
            t_uvs = [
                [(0.0, 0.5), (0.0, 1.0), (1.0, 1.0), (1.0, 0.5)], [(0.0, 0.0), (0.0, 0.5), (1.0, 0.5), (1.0, 0.0)],
                [(0.0, 0.5), (1.0, 0.5), (1.0, 1.0), (0.0, 1.0)], [(0.0, 0.0), (1.0, 0.0), (1.0, 0.5), (0.0, 0.5)],
                [(0.0, 0.5), (0.0, 1.0), (0.5, 1.0), (0.5, 0.5)], [(0.5, 0.5), (0.5, 1.0), (0.0, 1.0), (0.0, 0.5)],
                [(0.0, 0.5), (0.0, 1.0), (1.0, 1.0), (1.0, 0.5)], [(0.0, 0.5), (0.0, 1.0), (-1.0, 1.0), (-1.0, 0.5)],
                [(0.5, 0.5), (0.5, 1.0), (1.0, 1.0), (1.0, 0.5)], [(0.0, 0.5), (0.0, 1.0), (-0.5, 1.0), (-0.5, 0.5)]
            ]
            t_left = [2, 3, 7, 8]
            t_right = [0, 1, 10, 11]

        elif d.hip_model == 'FLAT':
            # square hips "eternit like"
            t_pts = [Vector((sx * x, sy * y, sz * z)) for x, y, z in [
                (-0.5, -0.4, 0.0), (-0.5, -0.4, 0.5), (-0.5, 0.4, 0.0),
                (-0.5, 0.4, 0.5), (0.5, -0.5, 0.5), (0.5, -0.5, 1.0),
                (0.5, 0.5, 0.5), (0.5, 0.5, 1.0), (-0.5, 0.33, 0.0),
                (-0.5, -0.33, 0.0), (0.5, -0.33, 0.5), (0.5, 0.33, 0.5),
                (-0.5, 0.33, -0.5), (-0.5, -0.33, -0.5), (0.5, -0.33, -0.5),
                (0.5, 0.33, -0.5)]
            ]
            t_faces = [
                (0, 1, 3, 2, 8, 9), (2, 3, 7, 6), (6, 7, 5, 4, 10, 11),
                (4, 5, 1, 0), (9, 10, 4, 0), (7, 3, 1, 5),
                (2, 6, 11, 8), (9, 8, 12, 13), (12, 15, 14, 13),
                (8, 11, 15, 12), (10, 9, 13, 14), (11, 10, 14, 15)]
            t_uvs = [
                [(0.5, 1.0), (0.93, 0.75), (0.93, 0.25), (0.5, 0.0), (0.07, 0.25), (0.07, 0.75)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.5, 1.0), (0.93, 0.75), (0.93, 0.25), (0.5, 0.0), (0.07, 0.25), (0.07, 0.75)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)],
                [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0), (0.0, 1.0)]
            ]
            t_left = []
            t_right = []

        t_idmats = [idmat for f in t_faces]

        for pan in self.pans:
            for i, s in enumerate(pan.segs):
                if ('LINK' in s.type and
                        d.beam_sec_enable):
                    ##############
                    # beam inside
                    ##############
                    f = len(verts)

                    s0 = s.offset(-0.5 * d.beam_sec_width)

                    s2 = pan.last_seg(i)
                    s3 = pan.next_seg(i)
                    p0 = s0.p0
                    p1 = s0.p1
                    t0 = 0
                    t1 = 1
                    res, p, t = s0.intersect(s2)
                    if res:
                        t0 = t
                        p0 = p
                    res, p, t = s0.intersect(s3)
                    if res:
                        t1 = t
                        p1 = p

                    p0 = s.lerp(t0)
                    p1 = s.lerp(t1)

                    x0, y0 = s0.lerp(t0)
                    x1, y1 = s.p0

                    z0 = self.z + d.beam_sec_alt + pan.altitude(p0)
                    z1 = z0 - d.beam_sec_height
                    z2 = self.z + d.beam_sec_alt + pan.altitude(s.p0)
                    z3 = z2 - d.beam_sec_height

                    verts.extend([
                        (x0, y0, z0),
                        (x0, y0, z1),
                        (x1, y1, z2),
                        (x1, y1, z3)
                    ])

                    x2, y2 = s0.lerp(t1)
                    x3, y3 = s.p1

                    z0 = self.z + d.beam_sec_alt + pan.altitude(p1)
                    z1 = z0 - d.beam_sec_height
                    z2 = self.z + d.beam_sec_alt + pan.altitude(s.p1)
                    z3 = z2 - d.beam_sec_height

                    verts.extend([
                        (x2, y2, z0),
                        (x2, y2, z1),
                        (x3, y3, z2),
                        (x3, y3, z3)
                    ])

                    faces.extend([
                        (f, f + 4, f + 5, f + 1),
                        (f + 1, f + 5, f + 7, f + 3),
                        (f + 2, f + 3, f + 7, f + 6),
                        (f + 2, f + 6, f + 4, f),
                        (f, f + 1, f + 3, f + 2),
                        (f + 5, f + 4, f + 6, f + 7)
                    ])
                    matids.extend([
                        idmat_poutre, idmat_poutre, idmat_poutre,
                        idmat_poutre, idmat_poutre, idmat_poutre
                    ])
                    uvs.extend([
                        [(0, 0), (1, 0), (1, 1), (0, 1)],
                        [(0, 0), (1, 0), (1, 1), (0, 1)],
                        [(0, 0), (1, 0), (1, 1), (0, 1)],
                        [(0, 0), (1, 0), (1, 1), (0, 1)],
                        [(0, 0), (1, 0), (1, 1), (0, 1)],
                        [(0, 0), (1, 0), (1, 1), (0, 1)]
                    ])

                if s.type == 'LINK_HIP':

                    # TODO:
                    # Slice borders properly

                    if d.hip_enable:

                        s0 = pan.last_seg(i)
                        s1 = pan.next_seg(i)
                        s2 = s
                        p0 = s0.p1
                        p1 = s1.p0
                        z0 = pan.altitude(p0)
                        z1 = pan.altitude(p1)

                        # s0 is top seg
                        if z1 > z0:
                            p0, p1 = p1, p0
                            z0, z1 = z1, z0
                            s2 = s2.oposite
                        dz = pan.altitude(s2.sized_normal(0, 1).p1) - z0

                        if dz < 0:
                            s1 = s1.offset(d.tile_border)
                            # vx from p0 to p1
                            x, y = p1 - p0
                            v = Vector((x, y, z1 - z0))
                            vx = v.normalized()
                            vy = vx.cross(Vector((0, 0, 1)))
                            vz = vy.cross(vx)

                            x0, y0 = p0 + d.hip_alt * vz.to_2d()
                            z2 = z0 + self.z + d.hip_alt * vz.z
                            tM = Matrix([
                                [vx.x, vy.x, vz.x, x0],
                                [vx.y, vy.y, vz.y, y0],
                                [vx.z, vy.z, vz.z, z2],
                                [0, 0, 0, 1]
                            ])
                            space_x = v.length - d.tile_border
                            n_x = 1 + int(space_x / d.hip_space_x)
                            dx = space_x / n_x
                            x0 = 0.5 * dx

                            t_verts = [p for p in t_pts]

                            # apply slope

                            for i in t_left:
                                t_verts[i] = t_verts[i].copy()
                                t_verts[i].z -= dz * t_verts[i].y
                            for i in t_right:
                                t_verts[i] = t_verts[i].copy()
                                t_verts[i].z += dz * t_verts[i].y

                            for k in range(n_x):
                                lM = tM @ Matrix([
                                    [1, 0, 0, x0 + k * dx],
                                    [0, -1, 0, 0],
                                    [0, 0, 1, 0],
                                    [0, 0, 0, 1]
                                ])
                                f = len(verts)

                                verts.extend([lM @ p for p in t_verts])
                                faces.extend([tuple(i + f for i in p) for p in t_faces])
                                matids.extend(t_idmats)
                                uvs.extend(t_uvs)

                elif s.type == 'LINK_VALLEY':
                    if d.valley_enable:
                        f = len(verts)
                        s0 = s.offset(-2 * d.tile_couloir)
                        s1 = pan.last_seg(i)
                        s2 = pan.next_seg(i)
                        p0 = s0.p0
                        p1 = s0.p1
                        res, p, t = s0.intersect(s1)
                        if res:
                            p0 = p
                        res, p, t = s0.intersect(s2)
                        if res:
                            p1 = p
                        alt = self.z + d.valley_altitude
                        x0, y0 = s1.p1
                        x1, y1 = p0
                        x2, y2 = p1
                        x3, y3 = s2.p0
                        z0 = alt + pan.altitude(s1.p1)
                        z1 = alt + pan.altitude(p0)
                        z2 = alt + pan.altitude(p1)
                        z3 = alt + pan.altitude(s2.p0)

                        verts.extend([
                            (x0, y0, z0),
                            (x1, y1, z1),
                            (x2, y2, z2),
                            (x3, y3, z3),
                        ])
                        faces.extend([
                            (f, f + 3, f + 2, f + 1)
                        ])
                        matids.extend([
                            idmat_valley
                            ])
                        uvs.extend([
                            [(0, 0), (1, 0), (1, 1), (0, 1)]
                        ])

                elif s.type == 'AXIS' and d.hip_enable and pan.side == 'LEFT':

                    tmin = 0
                    tmax = 1
                    s0 = pan.last_seg(i)
                    if s0.type == 'SIDE' and s.length > 0:
                        tmin = 0 - d.tile_side / s.length
                    s1 = pan.next_seg(i)

                    if s1.type == 'SIDE' and s.length > 0:
                        tmax = 1 + d.tile_side / s.length

                    # print("tmin:%s tmax:%s" % (tmin, tmax))
                    ####################
                    # Faitiere
                    ####################

                    f = len(verts)
                    s_len = (tmax - tmin) * s.length
                    n_obj = 1 + int(s_len / d.hip_space_x)
                    dx = s_len / n_obj
                    x0 = 0.5 * dx
                    v = s.v.normalized()
                    p0 = s.lerp(tmin)
                    tM = Matrix([
                        [v.x, v.y, 0, p0.x],
                        [v.y, -v.x, 0, p0.y],
                        [0, 0, 1, self.z + d.hip_alt],
                        [0, 0, 0, 1]
                    ])
                    t_verts = [p.copy() for p in t_pts]

                    # apply slope
                    for i in t_left:
                        t_verts[i].z += t_verts[i].y * (pan.other_side.slope - d.tile_size_z / d.tile_size_y)
                    for i in t_right:
                        t_verts[i].z -= t_verts[i].y * (pan.slope - d.tile_size_z / d.tile_size_y)

                    for k in range(n_obj):
                        lM = tM @ Matrix([
                            [1, 0, 0, x0 + k * dx],
                            [0, -1, 0, 0],
                            [0, 0, 1, 0],
                            [0, 0, 0, 1]
                        ])
                        v = len(verts)
                        verts.extend([lM @ p for p in t_verts])
                        faces.extend([tuple(i + v for i in f) for f in t_faces])
                        matids.extend(t_idmats)
                        uvs.extend(t_uvs)

    def make_hole(self, context, hole_obj, o, d, update_parent=False):
        """
            Hole for t child on parent
            create / update a RoofCutter on parent
            assume context object is child roof
            with parent set
        """
        # print("Make hole :%s hole_obj:%s" % (o.name, hole_obj))
        if o.parent is None:
            return
        # root is a RoofSegment
        root = self.nodes[0].root
        r_pan = root.right
        l_pan = root.left

        # merge :
        # 5   ____________ 4
        #    /            |
        #   /     left    |
        #  /_____axis_____|  3 <- kill axis and this one
        # 0\              |
        #   \     right   |
        # 1  \____________| 2
        #
        # degenerate case:
        #
        #  /|
        # / |
        # \ |
        #  \|
        #

        segs = []
        last = len(r_pan.segs) - 1
        for i, seg in enumerate(r_pan.segs):
            # r_pan start parent roof side
            if i == last:
                to_merge = seg.copy
            elif seg.type != 'AXIS':
                segs.append(seg.copy)

        for i, seg in enumerate(l_pan.segs):
            # l_pan end parent roof side
            if i == 1:
                # 0 is axis
                to_merge.p1 = seg.p1
                segs.append(to_merge)
            elif seg.type != 'AXIS':
                segs.append(seg.copy)

        # if there is side offset:
        # create an arrow
        #
        # 4   s4
        #    /|
        #   / |___s1_______
        #  / p3            | p2  s3
        # 0\ p0___s0_______| p1
        #   \ |
        # 1  \|
        s0 = root.left._axis.offset(
                max(0.001,
                    min(
                        root.right.ysize - 0.001,
                        root.right.ysize - d.hole_offset_right
                        )
                    ))
        s1 = root.left._axis.offset(
                -max(0.001,
                    min(
                        root.left.ysize - 0.001,
                        root.left.ysize - d.hole_offset_left
                        )
                    ))

        s3 = segs[2].offset(
            -min(root.left.xsize - 0.001, d.hole_offset_front)
            )
        s4 = segs[0].copy
        p1 = s4.p1
        s4.p1 = segs[-1].p0
        s4.p0 = p1
        res, p0, t = s4.intersect(s0)
        res, p1, t = s0.intersect(s3)
        res, p2, t = s1.intersect(s3)
        res, p3, t = s4.intersect(s1)
        pts = []
        # pts in cw order for 'DIFFERENCE' mode
        pts.extend([segs[-1].p1, segs[-1].p0])
        if (segs[-1].p0 - p3).length > 0.001:
            pts.append(p3)
        pts.extend([p2, p1])
        if (segs[0].p1 - p0).length > 0.001:
            pts.append(p0)
        pts.extend([segs[0].p1, segs[0].p0])

        pts = [p.to_3d() for p in pts]

        if hole_obj is None:
            context.view_layer.objects.active = o.parent
            bpy.ops.archipack.roof_cutter(parent=d.t_parent, auto_manipulate=False)
            hole_obj = context.active_object
        else:
            context.view_layer.objects.active = hole_obj

        hole_obj.select_set(state=True)
        if d.parts[0].a0 < 0:
            y = -d.t_dist_y
        else:
            y = d.t_dist_y

        hole_obj.matrix_world = o.matrix_world @ Matrix([
            [1, 0, 0, 0],
            [0, 1, 0, y],
            [0, 0, 1, 0],
            [0, 0, 0, 1]
            ])

        hd = archipack_roof_cutter.datablock(hole_obj)
        hd.boundary = o.name
        hd.update_points(context, hole_obj, pts, update_parent=update_parent)
        hole_obj.select_set(state=False)

        context.view_layer.objects.active = o

    def change_coordsys(self, fromTM, toTM):
        """
            move shape fromTM into toTM coordsys
        """
        dp = (toTM.inverted() @ fromTM.translation).to_2d()
        da = toTM.row[1].to_2d().angle_signed(fromTM.row[1].to_2d())
        ca = cos(da)
        sa = sin(da)
        rM = Matrix([
            [ca, -sa],
            [sa, ca]
            ])
        for s in self.segs:
            tp = (rM @ s.p0) - s.p0 + dp
            s.rotate(da)
            s.translate(tp)

    def t_partition(self, array, begin, end):
        pivot = begin
        for i in range(begin + 1, end + 1):
            # wall idx
            if array[i][0] < array[begin][0]:
                pivot += 1
                array[i], array[pivot] = array[pivot], array[i]
        array[pivot], array[begin] = array[begin], array[pivot]
        return pivot

    def sort_t(self, array, begin=0, end=None):
        # print("sort_child")
        if end is None:
            end = len(array) - 1

        def _quicksort(array, begin, end):
            if begin >= end:
                return
            pivot = self.t_partition(array, begin, end)
            _quicksort(array, begin, pivot - 1)
            _quicksort(array, pivot + 1, end)
        return _quicksort(array, begin, end)

    def make_wall_fit(self, context, o, wall, inside):
        wd = wall.data.archipack_wall2[0]
        wg = wd.get_generator()
        z0 = self.z - wd.z

        # wg in roof coordsys
        wg.change_coordsys(wall.matrix_world, o.matrix_world)

        if inside:
            # fit inside
            offset = -0.5 * (1 - wd.x_offset) * wd.width
        else:
            # fit outside
            offset = 0

        wg.set_offset(offset)

        wall_t = [[] for w in wg.segs]

        for pan in self.pans:
            # walls segment
            for widx, wseg in enumerate(wg.segs):

                ls = wseg.line.length

                for seg in pan.segs:
                    # intersect with a roof segment
                    # any linked or axis intersection here
                    # will be dup as they are between 2 roof parts
                    res, p, t, v = wseg.line.intersect_ext(seg)
                    if res:
                        z = z0 + pan.altitude(p)
                        wall_t[widx].append((t, z, t * ls))

                # lie under roof
                if type(wseg).__name__ == "CurvedWall":
                    for step in range(12):
                        t = step / 12
                        p = wseg.line.lerp(t)
                        if pan.inside(p):
                            z = z0 + pan.altitude(p)
                            wall_t[widx].append((t, z, t * ls))
                else:
                    if pan.inside(wseg.line.p0):
                        z = z0 + pan.altitude(wseg.line.p0)
                        wall_t[widx].append((0, z, 0))

        old = context.active_object
        old_sel = wall.select_get()
        wall.select_set(state=True)
        context.view_layer.objects.active = wall

        wd.auto_update = False
        # setup splits count and first split to 0
        for widx, seg in enumerate(wall_t):
            self.sort_t(seg)
            # print("seg: %s" % seg)
            for s in seg:
                t, z, d = s
                wd.parts[widx].n_splits = len(seg) + 1
                wd.parts[widx].z[0] = 0
                wd.parts[widx].t[0] = 0
                break

        # add splits, skip dups
        for widx, seg in enumerate(wall_t):
            t0 = 0
            last_d = -1
            sid = 1
            for s in seg:
                t, z, d = s
                if t == 0:
                    # add at end of last segment
                    if widx > 0:
                        lid = wd.parts[widx - 1].n_splits - 1
                        wd.parts[widx - 1].z[lid] = z
                        wd.parts[widx - 1].t[lid] = 1
                    else:
                        wd.parts[widx].z[0] = z
                        wd.parts[widx].t[0] = t
                        sid = 1
                else:
                    if d - last_d < 0.001:
                        wd.parts[widx].n_splits -= 1
                        continue
                    wd.parts[widx].z[sid] = z
                    wd.parts[widx].t[sid] = t - t0
                    t0 = t
                    sid += 1
                    last_d = d

        if wd.closed:
            last = wd.parts[wd.n_parts].n_splits - 1
            wd.parts[wd.n_parts].z[last] = wd.parts[0].z[0]
            wd.parts[wd.n_parts].t[last] = 1.0

        wd.auto_update = True
        """
        for s in self.segs:
            s.as_curve(context)
        for s in wg.segs:
            s.as_curve(context)
        """
        wall.select_set(state=old_sel)
        context.view_layer.objects.active = old

    def boundary(self, context, o):
        """
            either external or holes cuts
        """
        to_remove = []
        for b in o.children:
            d = archipack_roof_cutter.datablock(b)
            if d is not None:
                g = d.ensure_direction()
                g.change_coordsys(b.matrix_world, o.matrix_world)
                for i, pan in enumerate(self.pans):
                    keep = pan.slice(g)
                    if not keep:
                        if i not in to_remove:
                            to_remove.append(i)
                    pan.limits()
        to_remove.sort()
        for i in reversed(to_remove):
            self.pans.pop(i)

    def draft(self, context, verts, edges):
        for pan in self.pans:
            pan.draw(context, self.z, verts, edges)

        for s in self.segs:
            if s.constraint_type == 'SLOPE':
                f = len(verts)
                p0 = s.p0.to_3d()
                p0.z = self.z
                p1 = s.p1.to_3d()
                p1.z = self.z
                verts.extend([p0, p1])
                edges.append([f, f + 1])


def update(self, context):
    self.update(context)


def update_manipulators(self, context):
    self.update(context, manipulable_refresh=True)


def update_path(self, context):
    self.update_path(context)


def update_parent(self, context):

    # update part a0
    o = context.active_object
    p, d = self.find_parent(context)

    if d is not None:

        o.parent = p

        # trigger object update
        # hole creation and parent's update

        self.parts[0].a0 = pi / 2

    elif self.t_parent != "":
        self.t_parent = ""


def update_cutter(self, context):
    self.update(context, update_hole=True)


def update_childs(self, context):
    self.update(context, update_childs=True, update_hole=True)


def update_components(self, context):
    self.update(context, update_parent=False, update_hole=False)


class ArchipackSegment():
    length : FloatProperty(
            name="Length",
            min=0.01,
            max=1000.0,
            default=4.0,
            update=update
            )
    a0 : FloatProperty(
            name="Angle",
            min=-2 * pi,
            max=2 * pi,
            default=0,
            subtype='ANGLE', unit='ROTATION',
            update=update_cutter
            )
    manipulators : CollectionProperty(type=archipack_manipulator)


class ArchipackLines():
    n_parts : IntProperty(
            name="Parts",
            min=1,
            default=1, update=update_manipulators
            )
    # UI layout related
    parts_expand : BoolProperty(
            default=False
            )

    def draw(self, layout, context):
        box = layout.box()
        row = box.row()
        if self.parts_expand:
            row.prop(self, 'parts_expand', icon="TRIA_DOWN", text="Parts", emboss=False)
            box.prop(self, 'n_parts')
            for i, part in enumerate(self.parts):
                part.draw(layout, context, i)
        else:
            row.prop(self, 'parts_expand', icon="TRIA_RIGHT", text="Parts", emboss=False)

    def update_parts(self):
        # print("update_parts")
        # remove rows
        # NOTE:
        # n_parts+1
        # as last one is end point of last segment or closing one
        for i in range(len(self.parts), self.n_parts + 1, -1):
            self.parts.remove(i - 1)

        # add rows
        for i in range(len(self.parts), self.n_parts + 1):
            self.parts.add()

        self.setup_manipulators()

    def setup_parts_manipulators(self):
        for i in range(self.n_parts + 1):
            p = self.parts[i]
            n_manips = len(p.manipulators)
            if n_manips < 1:
                s = p.manipulators.add()
                s.type_key = "ANGLE"
                s.prop1_name = "a0"
            if n_manips < 2:
                s = p.manipulators.add()
                s.type_key = "SIZE"
                s.prop1_name = "length"
            if n_manips < 3:
                s = p.manipulators.add()
                s.type_key = 'WALL_SNAP'
                s.prop1_name = str(i)
                s.prop2_name = 'z'
            if n_manips < 4:
                s = p.manipulators.add()
                s.type_key = 'DUMB_STRING'
                s.prop1_name = str(i + 1)
            if n_manips < 5:
                s = p.manipulators.add()
                s.type_key = "SIZE"
                s.prop1_name = "offset"
            p.manipulators[2].prop1_name = str(i)
            p.manipulators[3].prop1_name = str(i + 1)


class archipack_roof_segment(ArchipackSegment, PropertyGroup):

    bound_idx : IntProperty(
            name="Link to",
            default=0,
            min=0,
            update=update_manipulators
            )
    width_left : FloatProperty(
            name="L Width",
            min=0.01,
            default=3.0,
            update=update_cutter
            )
    width_right : FloatProperty(
            name="R Width",
            min=0.01,
            default=3.0,
            update=update_cutter
            )
    slope_left : FloatProperty(
            name="L slope",
            min=0.0,
            default=0.3,
            update=update_cutter
            )
    slope_right : FloatProperty(
            name="R slope",
            min=0.0,
            default=0.3,
            update=update_cutter
            )
    auto_left : EnumProperty(
            description="Left mode",
            name="Left",
            items=(
                ('AUTO', 'Auto', '', 0),
                ('WIDTH', 'Width', '', 1),
                ('SLOPE', 'Slope', '', 2),
                ('ALL', 'All', '', 3),
                ),
            default="AUTO",
            update=update_manipulators
            )
    auto_right : EnumProperty(
            description="Right mode",
            name="Right",
            items=(
                ('AUTO', 'Auto', '', 0),
                ('WIDTH', 'Width', '', 1),
                ('SLOPE', 'Slope', '', 2),
                ('ALL', 'All', '', 3),
                ),
            default="AUTO",
            update=update_manipulators
            )
    triangular_end : BoolProperty(
            name="Triangular end",
            default=False,
            update=update
            )
    take_precedence : BoolProperty(
            name="Take precedence",
            description="On T segment take width precedence",
            default=False,
            update=update
            )

    constraint_type : EnumProperty(
            items=(
                ('HORIZONTAL', 'Horizontal', '', 0),
                ('SLOPE', 'Slope', '', 1)
                ),
            default='HORIZONTAL',
            update=update_manipulators
            )

    enforce_part : EnumProperty(
            name="Enforce part",
            items=(
                ('AUTO', 'Auto', '', 0),
                ('VALLEY', 'Valley', '', 1),
                ('HIP', 'Hip', '', 2)
                ),
            default='AUTO',
            update=update
            )

    def find_in_selection(self, context):
        """
            find witch selected object this instance belongs to
            provide support for "copy to selected"
        """
        selected = context.selected_objects[:]
        for o in selected:
            d = archipack_roof.datablock(o)
            if d:
                for part in d.parts:
                    if part == self:
                        return d
        return None

    def draw(self, layout, context, index):
        box = layout.box()
        if index > 0:
            box.prop(self, "constraint_type", text=str(index + 1))
            if self.constraint_type == 'SLOPE':
                box.prop(self, "enforce_part", text="")
        else:
            box.label(text="Part 1:")
        box.prop(self, "length")
        box.prop(self, "a0")

        if index > 0:
            box.prop(self, 'bound_idx')
            if self.constraint_type == 'HORIZONTAL':
                box.prop(self, "triangular_end")
                row = box.row(align=True)
                row.prop(self, "auto_left", text="")
                row.prop(self, "auto_right", text="")
                if self.auto_left in {'ALL', 'WIDTH'}:
                    box.prop(self, "width_left")
                if self.auto_left in {'ALL', 'SLOPE'}:
                    box.prop(self, "slope_left")
                if self.auto_right in {'ALL', 'WIDTH'}:
                    box.prop(self, "width_right")
                if self.auto_right in {'ALL', 'SLOPE'}:
                    box.prop(self, "slope_right")
        elif self.constraint_type == 'HORIZONTAL':
            box.prop(self, "triangular_end")

    def update(self, context, manipulable_refresh=False, update_hole=False):
        props = self.find_in_selection(context)
        if props is not None:
            props.update(context,
                manipulable_refresh,
                update_parent=True,
                update_hole=True,
                update_childs=True)


class archipack_roof(ArchipackLines, ArchipackObject, Manipulable, PropertyGroup):
    parts : CollectionProperty(type=archipack_roof_segment)
    z : FloatProperty(
            name="Altitude",
            default=3, precision=2, step=1,
            unit='LENGTH', subtype='DISTANCE',
            update=update_childs
            )
    slope_left : FloatProperty(
            name="L slope",
            default=0.5, precision=2, step=1,
            update=update_childs
            )
    slope_right : FloatProperty(
            name="R slope",
            default=0.5, precision=2, step=1,
            update=update_childs
            )
    width_left : FloatProperty(
            name="L width",
            default=3, precision=2, step=1,
            unit='LENGTH', subtype='DISTANCE',
            update=update_cutter
            )
    width_right : FloatProperty(
            name="R width",
            default=3, precision=2, step=1,
            unit='LENGTH', subtype='DISTANCE',
            update=update_cutter
            )
    draft : BoolProperty(
            options={'SKIP_SAVE'},
            name="Draft mode",
            default=False,
            update=update_manipulators
            )
    auto_update : BoolProperty(
            options={'SKIP_SAVE'},
            default=True,
            update=update_manipulators
            )
    quick_edit : BoolProperty(
            options={'SKIP_SAVE'},
            name="Quick Edit",
            default=False
            )

    tile_enable : BoolProperty(
            name="Enable",
            default=True,
            update=update_components
            )
    tile_solidify : BoolProperty(
            name="Solidify",
            default=True,
            update=update_components
            )
    tile_height : FloatProperty(
            name="Height",
            description="Amount for solidify",
            min=0,
            default=0.02,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    tile_bevel : BoolProperty(
            name="Bevel",
            default=False,
            update=update_components
            )
    tile_bevel_amt : FloatProperty(
            name="Amount",
            description="Amount for bevel",
            min=0,
            default=0.02,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    tile_bevel_segs : IntProperty(
            name="Segs",
            description="Bevel Segs",
            min=1,
            default=2,
            update=update_components
            )
    tile_alternate : BoolProperty(
            name="Alternate",
            default=False,
            update=update_components
            )
    tile_offset : FloatProperty(
            name="Offset",
            description="Offset from start",
            min=0,
            max=100,
            subtype="PERCENTAGE",
            update=update_components
            )
    tile_altitude : FloatProperty(
            name="Altitude",
            description="Altitude from roof",
            default=0.1,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    tile_size_x : FloatProperty(
            name="Width",
            description="Size of tiles on x axis",
            min=0.01,
            default=0.2,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    tile_size_y : FloatProperty(
            name="Length",
            description="Size of tiles on y axis",
            min=0.01,
            default=0.3,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    tile_size_z : FloatProperty(
            name="Thickness",
            description="Size of tiles on z axis",
            min=0.0,
            default=0.02,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    tile_space_x : FloatProperty(
            name="Width",
            description="Space between tiles on x axis",
            min=0.01,
            default=0.2,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    tile_space_y : FloatProperty(
            name="Length",
            description="Space between tiles on y axis",
            min=0.01,
            default=0.3,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    tile_fit_x : BoolProperty(
            name="Fit x",
            description="Fit roof on x axis",
            default=True,
            update=update_components
            )
    tile_fit_y : BoolProperty(
            name="Fit y",
            description="Fit roof on y axis",
            default=True,
            update=update_components
            )
    tile_expand : BoolProperty(
            options={'SKIP_SAVE'},
            name="Tiles",
            description="Expand tiles panel",
            default=False
            )
    tile_model : EnumProperty(
            name="Model",
            items=(
                ('BRAAS1', 'Braas 1', '', 0),
                ('BRAAS2', 'Braas 2', '', 1),
                ('ETERNIT', 'Eternit', '', 2),
                ('LAUZE', 'Lauze', '', 3),
                ('ROMAN', 'Roman', '', 4),
                ('ROUND', 'Round', '', 5),
                ('PLACEHOLDER', 'Square', '', 6),
                ('ONDULEE', 'Ondule', '', 7),
                ('METAL', 'Metal', '', 8),
                # ('USER', 'User defined', '', 7)
                ),
            default="BRAAS2",
            update=update_components
            )
    tile_side : FloatProperty(
            name="Side",
            description="Space on side",
            default=0,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    tile_couloir : FloatProperty(
            name="Valley",
            description="Space between tiles on valley",
            min=0,
            default=0.05,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    tile_border : FloatProperty(
            name="Bottom",
            description="Tiles offset from bottom",
            default=0,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )

    gutter_expand : BoolProperty(
            options={'SKIP_SAVE'},
            name="Gutter",
            description="Expand gutter panel",
            default=False
            )
    gutter_enable : BoolProperty(
            name="Enable",
            default=True,
            update=update_components
            )
    gutter_alt : FloatProperty(
            name="Altitude",
            description="altitude",
            default=0,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    gutter_width : FloatProperty(
            name="Width",
            description="Width",
            min=0.01,
            default=0.15,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    gutter_dist : FloatProperty(
            name="Spacing",
            description="Spacing",
            min=0,
            default=0.05,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    gutter_boudin : FloatProperty(
            name="Small width",
            description="Small width",
            min=0,
            default=0.015,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    gutter_segs : IntProperty(
            default=6,
            min=1,
            name="Segs",
            update=update_components
            )

    beam_expand : BoolProperty(
            options={'SKIP_SAVE'},
            name="Beam",
            description="Expand beam panel",
            default=False
            )
    beam_enable : BoolProperty(
            name="Ridge pole",
            default=True,
            update=update_components
            )
    beam_width : FloatProperty(
            name="Width",
            description="Width",
            min=0.01,
            default=0.2,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    beam_height : FloatProperty(
            name="Height",
            description="Height",
            min=0.01,
            default=0.35,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    beam_offset : FloatProperty(
            name="Offset",
            description="Distance from roof border",
            default=0.02,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    beam_alt : FloatProperty(
            name="Altitude",
            description="Altitude from roof",
            default=-0.15,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    beam_sec_enable : BoolProperty(
            name="Hip rafter",
            default=True,
            update=update_components
            )
    beam_sec_width : FloatProperty(
            name="Width",
            description="Width",
            min=0.01,
            default=0.15,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    beam_sec_height : FloatProperty(
            name="Height",
            description="Height",
            min=0.01,
            default=0.2,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    beam_sec_alt : FloatProperty(
            name="Altitude",
            description="Distance from roof",
            default=-0.1,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    rafter_enable : BoolProperty(
            name="Rafter",
            default=True,
            update=update_components
            )
    rafter_width : FloatProperty(
            name="Width",
            description="Width",
            min=0.01,
            default=0.1,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    rafter_height : FloatProperty(
            name="Height",
            description="Height",
            min=0.01,
            default=0.2,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    rafter_spacing : FloatProperty(
            name="Spacing",
            description="Spacing",
            min=0.1,
            default=0.7,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    rafter_start : FloatProperty(
            name="Offset",
            description="Spacing from roof border",
            min=0,
            default=0.1,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    rafter_alt : FloatProperty(
            name="Altitude",
            description="Altitude from roof",
            max=-0.0001,
            default=-0.001,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )

    hip_enable : BoolProperty(
            name="Enable",
            default=True,
            update=update_components
            )
    hip_expand : BoolProperty(
            options={'SKIP_SAVE'},
            name="Hips",
            description="Expand hips panel",
            default=False
            )
    hip_alt : FloatProperty(
            name="Altitude",
            description="Hip altitude from roof",
            default=0.1,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    hip_space_x : FloatProperty(
            name="Spacing",
            description="Space between hips",
            min=0.01,
            default=0.4,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    hip_size_x : FloatProperty(
            name="Length",
            description="Length of hip",
            min=0.01,
            default=0.4,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    hip_size_y : FloatProperty(
            name="Width",
            description="Width of hip",
            min=0.01,
            default=0.15,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    hip_size_z : FloatProperty(
            name="Height",
            description="Height of hip",
            min=0.0,
            default=0.15,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    hip_model : EnumProperty(
            name="Model",
            items=(
                ('ROUND', 'Round', '', 0),
                ('ETERNIT', 'Eternit', '', 1),
                ('FLAT', 'Flat', '', 2)
                ),
            default="ROUND",
            update=update_components
            )
    valley_altitude : FloatProperty(
            name="Altitude",
            description="Valley altitude from roof",
            default=0.1,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    valley_enable : BoolProperty(
            name="Valley",
            default=True,
            update=update_components
            )

    fascia_enable : BoolProperty(
            name="Enable",
            description="Enable Fascia",
            default=True,
            update=update_components
            )
    fascia_expand : BoolProperty(
            options={'SKIP_SAVE'},
            name="Fascia",
            description="Expand fascia panel",
            default=False
            )
    fascia_height : FloatProperty(
            name="Height",
            description="Height",
            min=0.01,
            default=0.3,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    fascia_width : FloatProperty(
            name="Width",
            description="Width",
            min=0.01,
            default=0.02,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    fascia_offset : FloatProperty(
            name="Offset",
            description="Offset from roof border",
            default=0,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    fascia_altitude : FloatProperty(
            name="Altitude",
            description="Fascia altitude from roof",
            default=0.1,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )

    bargeboard_enable : BoolProperty(
            name="Enable",
            description="Enable Bargeboard",
            default=True,
            update=update_components
            )
    bargeboard_expand : BoolProperty(
            options={'SKIP_SAVE'},
            name="Bargeboard",
            description="Expand Bargeboard panel",
            default=False
            )
    bargeboard_height : FloatProperty(
            name="Height",
            description="Height",
            min=0.01,
            default=0.3,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    bargeboard_width : FloatProperty(
            name="Width",
            description="Width",
            min=0.01,
            default=0.02,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    bargeboard_offset : FloatProperty(
            name="Offset",
            description="Offset from roof border",
            default=0.001,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )
    bargeboard_altitude : FloatProperty(
            name="Altitude",
            description="Fascia altitude from roof",
            default=0.1,
            unit='LENGTH', subtype='DISTANCE',
            update=update_components
            )

    t_parent : StringProperty(
            name="Parent",
            default="",
            update=update_parent
            )
    t_part : IntProperty(
            name="Part",
            description="Parent part index",
            default=0,
            min=0,
            update=update_cutter
            )
    t_dist_x : FloatProperty(
            name="Dist x",
            description="Location on axis ",
            default=0,
            update=update_cutter
            )
    t_dist_y : FloatProperty(
            name="Dist y",
            description="Lateral distance from axis",
            min=0.0001,
            default=0.0001,
            update=update_cutter
            )
    z_parent: FloatProperty(
        description="Delta z of t child for grand childs",
        default=0
    )
    hole_offset_left : FloatProperty(
            name="Left",
            description="Left distance from border",
            min=0,
            default=0,
            update=update_cutter
            )
    hole_offset_right : FloatProperty(
            name="Right",
            description="Right distance from border",
            min=0,
            default=0,
            update=update_cutter
            )
    hole_offset_front : FloatProperty(
            name="Front",
            description="Front distance from border",
            default=0,
            update=update_cutter
            )

    def make_wall_fit(self, context, o, wall, inside=False):
        origin = Vector((0, 0, self.z))
        g = self.get_generator(origin)
        g.make_roof(context)
        g.make_wall_fit(context, o, wall, inside)

    def update_parts(self):
        # NOTE:
        # n_parts+1
        # as last one is end point of last segment or closing one
        for i in range(len(self.parts), self.n_parts, -1):
            self.parts.remove(i - 1)

        # add rows
        for i in range(len(self.parts), self.n_parts):
            bound_idx = len(self.parts)
            self.parts.add()
            self.parts[-1].bound_idx = bound_idx

        self.setup_manipulators()

    def setup_manipulators(self):
        if len(self.manipulators) < 1:
            s = self.manipulators.add()
            s.type_key = "SIZE"
            s.prop1_name = "z"
            s.normal = (0, 1, 0)
        if len(self.manipulators) < 2:
            s = self.manipulators.add()
            s.type_key = "SIZE"
            s.prop1_name = "width_left"
        if len(self.manipulators) < 3:
            s = self.manipulators.add()
            s.type_key = "SIZE"
            s.prop1_name = "width_right"

        for i in range(self.n_parts):
            p = self.parts[i]
            n_manips = len(p.manipulators)
            if n_manips < 1:
                s = p.manipulators.add()
                s.type_key = "ANGLE"
                s.prop1_name = "a0"
            if n_manips < 2:
                s = p.manipulators.add()
                s.type_key = "SIZE"
                s.prop1_name = "length"
            if n_manips < 3:
                s = p.manipulators.add()
                s.type_key = 'DUMB_STRING'
                s.prop1_name = str(i + 1)
            p.manipulators[2].prop1_name = str(i + 1)
            if n_manips < 4:
                s = p.manipulators.add()
                s.type_key = 'SIZE'
                s.prop1_name = "width_left"
            if n_manips < 5:
                s = p.manipulators.add()
                s.type_key = 'SIZE'
                s.prop1_name = "width_right"
            if n_manips < 6:
                s = p.manipulators.add()
                s.type_key = 'SIZE'
                s.prop1_name = "slope_left"
            if n_manips < 7:
                s = p.manipulators.add()
                s.type_key = 'SIZE'
                s.prop1_name = "slope_right"

    def get_generator(self, origin=Vector((0, 0, 0))):
        g = RoofGenerator(self, origin)

        # TODO: sort part by bound idx so deps always find parent

        for i, part in enumerate(self.parts):
            # skip part if bound_idx > parent
            # so deps always see parent
            if part.bound_idx <= i:
                g.add_part(part)
        g.locate_manipulators()
        return g

    def make_surface(self, o, verts, edges):
        bm = bmesh.new()
        for v in verts:
            bm.verts.new(v)
        bm.verts.ensure_lookup_table()
        for ed in edges:
            bm.edges.new((bm.verts[ed[0]], bm.verts[ed[1]]))
        bm.edges.ensure_lookup_table()
        # bmesh.ops.contextual_create(bm, geom=bm.edges)
        bm.to_mesh(o.data)
        bm.free()

    def find_parent(self, context):
        o = context.scene.objects.get(self.t_parent.strip())
        return o, archipack_roof.datablock(o)

    def intersection_angle(self, t_slope, t_width, p_slope, angle):
        # 2d intersection angle between two roofs parts
        dy = abs(t_slope * t_width / p_slope)
        ca = cos(angle)
        ta = tan(angle)
        if ta == 0:
            w0 = 0
        else:
            w0 = dy * ta
        if ca == 0:
            w1 = 0
        else:
            w1 = t_width / ca
        dx = w1 - w0
        return atan2(dy, dx)

    def relocate_child(self, context, o, g, child):

        d = archipack_roof.datablock(child)

        if d is not None and d.t_part - 1 < len(g.segs):
            # print("relocate_child(%s)" % (child.name))

            seg = g.segs[d.t_part]
            # adjust T part matrix_world from parent
            # T part origin located on parent axis
            # with y in parent direction
            t = (d.t_dist_x / seg.length)
            x, y, z = seg.lerp(t).to_3d()
            dy = -seg.v.normalized()
            child.matrix_world = o.matrix_world @ Matrix([
                [dy.x, -dy.y, 0, x],
                [dy.y, dy.x, 0, y],
                [0, 0, 1, z],
                [0, 0, 0, 1]
            ])

    def relocate_childs(self, context, o, g):
        for child in o.children:
            d = archipack_roof.datablock(child)
            if d is not None and d.t_parent == o.name:
                self.relocate_child(context, o, g, child)

    def update_childs(self, context, o, g):
        for child in o.children:
            d = archipack_roof.datablock(child)
            if d is not None and d.t_parent == o.name:
                # print("upate_childs(%s)" % (child.name))
                child.select_set(state=True)
                context.view_layer.objects.active = child
                # regenerate hole
                d.update(context, update_hole=True, update_parent=False)
                child.select_set(state=False)
        o.select_set(state=True)
        context.view_layer.objects.active = o

    def update(self,
                context,
                manipulable_refresh=False,
                update_childs=False,
                update_parent=True,
                update_hole=False,
                force_update=False):
        """
            update_hole: on t_child must update parent
            update_childs: force childs update
            force_update: skip throttle
        """
        # print("update")
        o = self.find_in_selection(context, self.auto_update)

        if o is None:
            return

        # clean up manipulators before any data model change
        if manipulable_refresh:
            self.manipulable_disable(context)

        self.update_parts()

        verts, edges, faces, matids, uvs = [], [], [], [], []

        y = 0
        z = self.z
        p, d = self.find_parent(context)
        g = None

        # t childs: use parent to relocate
        # setup slopes into generator
        if d is not None:
            pg = d.get_generator()
            pg.make_roof(context)

            if self.t_part - 1 < len(pg.segs):

                seg = pg.nodes[self.t_part].root

                d.relocate_child(context, p, pg, o)

                a0 = self.parts[0].a0
                a_axis = a0 - pi / 2
                a_offset = 0
                s_left = self.slope_left
                w_left = -self.width_left
                s_right = self.slope_right
                w_right = self.width_right
                if a0 > 0:
                    # a_axis est mesure depuis la perpendiculaire à l'axe
                    slope = seg.right.slope
                    y = self.t_dist_y
                else:
                    a_offset = pi
                    slope = seg.left.slope
                    y = -self.t_dist_y
                    s_left, s_right = s_right, s_left
                    w_left, w_right = -w_right, -w_left

                if slope == 0:
                    slope = 0.0001

                # print("slope: %s" % (slope))

                z = d.z_parent + d.z - self.t_dist_y * slope
                self.z_parent = z - self.z
                # a_right from axis cross z

                b_right = self.intersection_angle(
                    s_left,
                    w_left,
                    slope,
                    a_axis)

                a_right = b_right + a_offset

                b_left = self.intersection_angle(
                    s_right,
                    w_right,
                    slope,
                    a_axis)

                a_left = b_left + a_offset

                g = self.get_generator(origin=Vector((0, y, z)))

                # override by user defined slope if any
                make_right = True
                make_left = True
                for s in g.segs:
                    if (s.constraint_type == 'SLOPE' and
                            s.v0_idx == 0):
                        da = g.segs[0].v.angle_signed(s.v)
                        if da > 0:
                            make_left = False
                        else:
                            make_right = False

                if make_left:
                    # Add 'SLOPE' constraints for segment 0
                    v = Vector((cos(a_left), sin(a_left)))
                    s = StraightRoof(g.origin, v)
                    s.v0_idx = 0
                    s.constraint_type = 'SLOPE'
                    # s.enforce_part = 'VALLEY'
                    s.angle_0 = a_left
                    s.take_precedence = False
                    g.segs.append(s)

                if make_right:
                    v = Vector((cos(a_right), sin(a_right)))
                    s = StraightRoof(g.origin, v)
                    s.v0_idx = 0
                    s.constraint_type = 'SLOPE'
                    # s.enforce_part = 'VALLEY'
                    s.angle_0 = a_right
                    s.take_precedence = False
                    g.segs.append(s)

        if g is None:
            g = self.get_generator(origin=Vector((0, y, z)))

        # setup per segment manipulators
        if len(g.segs) > 0:
            f = g.segs[0]
            # z
            n = f.straight(-1, 0).v.to_3d()
            self.manipulators[0].set_pts([(0, 0, 0), (0, 0, self.z), (1, 0, 0)], normal=n)
            # left width
            n = f.sized_normal(0, -self.width_left)
            self.manipulators[1].set_pts([n.p0.to_3d(), n.p1.to_3d(), (-1, 0, 0)])
            # right width
            n = f.sized_normal(0, self.width_right)
            self.manipulators[2].set_pts([n.p0.to_3d(), n.p1.to_3d(), (1, 0, 0)])

        g.make_roof(context)

        # update childs here so parent may use
        # new holes when parent shape does change
        if update_childs:
            self.update_childs(context, o, g)

        # on t_child
        if d is not None and update_hole:
            hole_obj = self.find_hole(context, o)
            g.make_hole(context, hole_obj, o, self, update_parent)
            # print("make_hole")

        # add cutters
        g.boundary(context, o)

        if self.draft:

            g.draft(context, verts, edges)
            g.gutter(self, verts, faces, edges, matids, uvs)
            self.make_surface(o, verts, edges)

        else:

            if self.bargeboard_enable:
                g.bargeboard(self, verts, faces, edges, matids, uvs)

            if self.fascia_enable:
                g.fascia(self, verts, faces, edges, matids, uvs)

            if self.beam_enable:
                g.beam_primary(self, verts, faces, edges, matids, uvs)

            g.hips(self, verts, faces, edges, matids, uvs)

            if self.gutter_enable:
                g.gutter(self, verts, faces, edges, matids, uvs)

            bmed.buildmesh(

                context, o, verts, faces, matids=matids, uvs=uvs,
                weld=False, clean=False, auto_smooth=True, temporary=False)

            # bpy.ops.object.mode_set(mode='EDIT')
            g.lambris(context, o, self)
            # print("lambris")

            if self.rafter_enable:
                # bpy.ops.object.mode_set(mode='EDIT')
                g.rafter(context, o, self)
                # print("rafter")

            if self.quick_edit and not force_update:
                if self.tile_enable:
                    bpy.ops.archipack.roof_throttle_update(name=o.name)
            else:
                # throttle here
                if self.tile_enable:
                    g.couverture(context, o, self)
                    # print("couverture")

        # enable manipulators rebuild
        if manipulable_refresh:
            self.manipulable_refresh = True
        # print("rafter")
        # restore context
        self.restore_context(context)
        # print("restore context")

    def find_hole(self, context, o):
        p, d = self.find_parent(context)
        if d is not None:
            for child in p.children:
                cd = archipack_roof_cutter.datablock(child)
                if cd is not None and cd.boundary == o.name:
                    return child
        return None

    def manipulable_setup(self, context):
        """
            NOTE:
            this one assume context.active_object is the instance this
            data belongs to, failing to do so will result in wrong
            manipulators set on active object
        """
        self.manipulable_disable(context)

        o = context.active_object

        self.setup_manipulators()

        for i, part in enumerate(self.parts):

            if i > 0:
                # start angle
                self.manip_stack.append(part.manipulators[0].setup(context, o, part))

            if part.constraint_type == 'HORIZONTAL':
                # length / radius + angle
                self.manip_stack.append(part.manipulators[1].setup(context, o, part))

            # index
            self.manip_stack.append(part.manipulators[2].setup(context, o, self))

            # size left
            if part.auto_left in {'WIDTH', 'ALL'}:
                self.manip_stack.append(part.manipulators[3].setup(context, o, part))
            # size right
            if part.auto_right in {'WIDTH', 'ALL'}:
                self.manip_stack.append(part.manipulators[4].setup(context, o, part))
            # slope left
            if part.auto_left in {'SLOPE', 'ALL'}:
                self.manip_stack.append(part.manipulators[5].setup(context, o, part))
            # slope right
            if part.auto_right in {'SLOPE', 'ALL'}:
                self.manip_stack.append(part.manipulators[6].setup(context, o, part))

        for m in self.manipulators:
            self.manip_stack.append(m.setup(context, o, self))

    def draw(self, layout, context):
        box = layout.box()
        row = box.row()
        if self.parts_expand:
            row.prop(self, 'parts_expand', icon="TRIA_DOWN", text="Parts", emboss=False)
            box.prop(self, 'n_parts')
            # box.prop(self, 'closed')
            for i, part in enumerate(self.parts):
                part.draw(layout, context, i)
        else:
            row.prop(self, 'parts_expand', icon="TRIA_RIGHT", text="Parts", emboss=False)


def update_hole(self, context):
    # update parent's roof only when manipulated
    self.update(context, update_parent=True)


def update_operation(self, context):
    self.reverse(context, make_ccw=(self.operation == 'INTERSECTION'))


class archipack_roof_cutter_segment(ArchipackCutterPart, PropertyGroup):
    manipulators : CollectionProperty(type=archipack_manipulator)
    type : EnumProperty(
        name="Type",
        items=(
            ('SIDE', 'Side', 'Side with bargeboard', 0),
            ('BOTTOM', 'Bottom', 'Bottom with gutter', 1),
            ('LINK', 'Side link', 'Side without decoration', 2),
            ('AXIS', 'Top', 'Top part with hip and beam', 3)
            # ('LINK_VALLEY', 'Side valley', 'Side with valley', 3),
            # ('LINK_HIP', 'Side hip', 'Side with hip', 4)
            ),
        default='SIDE',
        update=update_hole
        )

    def find_in_selection(self, context):
        selected = context.selected_objects[:]
        for o in selected:
            d = archipack_roof_cutter.datablock(o)
            if d:
                for part in d.parts:
                    if part == self:
                        return d
        return None


class archipack_roof_cutter(ArchipackCutter, ArchipackObject, Manipulable, PropertyGroup):
    # boundary
    parts : CollectionProperty(type=archipack_roof_cutter_segment)
    boundary : StringProperty(
            default="",
            name="Boundary",
            description="Boundary of t child to cut parent"
            )

    def update_points(self, context, o, pts, update_parent=False):
        """
            Create boundary from roof
        """
        self.auto_update = False
        self.manipulable_disable(context)
        self.from_points(pts)
        self.manipulable_refresh = True
        self.auto_update = True
        if update_parent:
            self.update_parent(context, o)
        # print("update_points")

    def update_parent(self, context, o):

        d = archipack_roof.datablock(o.parent)
        if d is not None:
            o.parent.select_set(state=True)
            context.view_layer.objects.active = o.parent
            d.update(context, update_childs=False, update_hole=False)
        o.parent.select_set(state=False)
        context.view_layer.objects.active = o
        # print("update_parent")


class ARCHIPACK_PT_roof_cutter(Panel):
    bl_idname = "ARCHIPACK_PT_roof_cutter"
    bl_label = "Roof Cutter"
    bl_space_type = 'VIEW_3D'
    bl_region_type = 'UI'
    bl_category = 'Archipack'

    @classmethod
    def poll(cls, context):
        return archipack_roof_cutter.filter(context.active_object)

    def draw(self, context):
        prop = archipack_roof_cutter.datablock(context.active_object)
        if prop is None:
            return
        layout = self.layout
        scene = context.scene
        box = layout.box()
        if prop.boundary != "":
            box.label(text="Auto Cutter:")
            box.label(text=prop.boundary)
        else:
            box.operator('archipack.roof_cutter_manipulate', icon='VIEW_PAN')
            box.prop(prop, 'operation', text="")
            box = layout.box()
            box.label(text="From curve")
            box.prop_search(prop, "user_defined_path", scene, "objects", text="", icon='OUTLINER_OB_CURVE')
            if prop.user_defined_path != "":
                box.prop(prop, 'user_defined_resolution')
                # box.prop(prop, 'x_offset')
                # box.prop(prop, 'angle_limit')
            """
            box.prop_search(prop, "boundary", scene, "objects", text="", icon='OUTLINER_OB_CURVE')
            """
            prop.draw(layout, context)


class ARCHIPACK_PT_roof(Panel):
    bl_idname = "ARCHIPACK_PT_roof"
    bl_label = "Roof"
    bl_space_type = 'VIEW_3D'
    bl_region_type = 'UI'
    bl_category = 'Archipack'

    @classmethod
    def poll(cls, context):
        return archipack_roof.filter(context.active_object)

    def draw(self, context):
        o = context.active_object
        prop = archipack_roof.datablock(o)
        if prop is None:
            return
        scene = context.scene
        layout = self.layout
        row = layout.row(align=True)
        row.operator('archipack.roof_manipulate', icon='VIEW_PAN')

        box = layout.box()
        row = box.row(align=True)
        row.operator("archipack.roof_preset_menu", text=bpy.types.ARCHIPACK_OT_roof_preset_menu.bl_label)
        row.operator("archipack.roof_preset", text="", icon='ADD')
        row.operator("archipack.roof_preset", text="", icon='REMOVE').remove_active = True
        box = layout.box()
        box.prop_search(prop, "t_parent", scene, "objects", text="Parent", icon='OBJECT_DATA')
        layout.operator('archipack.roof_cutter').parent = o.name
        p, d = prop.find_parent(context)
        if d is not None:
            box.prop(prop, 't_part')
            box.prop(prop, 't_dist_x')
            box.prop(prop, 't_dist_y')
            box.label(text="Hole")
            box.prop(prop, 'hole_offset_front')
            box.prop(prop, 'hole_offset_left')
            box.prop(prop, 'hole_offset_right')
        box = layout.box()
        box.prop(prop, 'quick_edit', icon="MOD_MULTIRES")
        box.prop(prop, 'draft')
        if d is None:
            box.prop(prop, 'z')
        box.prop(prop, 'slope_left')
        box.prop(prop, 'slope_right')
        box.prop(prop, 'width_left')
        box.prop(prop, 'width_right')
        # parts
        prop.draw(layout, context)
        # tiles
        box = layout.box()
        row = box.row(align=True)
        if prop.tile_expand:
            row.prop(prop, 'tile_expand', icon="TRIA_DOWN", text="Covering", emboss=False)
        else:
            row.prop(prop, 'tile_expand', icon="TRIA_RIGHT", text="Covering", emboss=False)
        row.prop(prop, 'tile_enable')
        if prop.tile_expand:
            box.prop(prop, 'tile_model', text="")

            box.prop(prop, 'tile_solidify', icon='MOD_SOLIDIFY')
            if prop.tile_solidify:
                box.prop(prop, 'tile_height')
                box.separator()
            box.prop(prop, 'tile_bevel', icon='MOD_BEVEL')
            if prop.tile_bevel:
                box.prop(prop, 'tile_bevel_amt')
                box.prop(prop, 'tile_bevel_segs')
                box.separator()
            box.label(text="Tile size")
            box.prop(prop, 'tile_size_x')
            box.prop(prop, 'tile_size_y')
            box.prop(prop, 'tile_size_z')
            box.prop(prop, 'tile_altitude')

            box.separator()
            box.label(text="Distribution")
            box.prop(prop, 'tile_alternate', icon='NLA')
            row = box.row(align=True)
            row.prop(prop, 'tile_fit_x', icon='ALIGN')
            row.prop(prop, 'tile_fit_y', icon='ALIGN')
            box.prop(prop, 'tile_offset')

            box.label(text="Spacing")
            box.prop(prop, 'tile_space_x')
            box.prop(prop, 'tile_space_y')

            box.separator()     # hip
            box.label(text="Borders")
            box.prop(prop, 'tile_side')
            box.prop(prop, 'tile_couloir')
            box.prop(prop, 'tile_border')

        box = layout.box()
        row = box.row(align=True)
        if prop.hip_expand:
            row.prop(prop, 'hip_expand', icon="TRIA_DOWN", text="Hip", emboss=False)
        else:
            row.prop(prop, 'hip_expand', icon="TRIA_RIGHT", text="Hip", emboss=False)
        row.prop(prop, 'hip_enable')
        if prop.hip_expand:
            box.prop(prop, 'hip_model', text="")
            box.prop(prop, 'hip_size_x')
            box.prop(prop, 'hip_size_y')
            box.prop(prop, 'hip_size_z')
            box.prop(prop, 'hip_alt')
            box.prop(prop, 'hip_space_x')
            box.separator()
            box.prop(prop, 'valley_enable')
            box.prop(prop, 'valley_altitude')

        box = layout.box()
        row = box.row(align=True)

        if prop.beam_expand:
            row.prop(prop, 'beam_expand', icon="TRIA_DOWN", text="Beam", emboss=False)
        else:
            row.prop(prop, 'beam_expand', icon="TRIA_RIGHT", text="Beam", emboss=False)
        if prop.beam_expand:
            box.prop(prop, 'beam_enable')
            if prop.beam_enable:
                box.prop(prop, 'beam_width')
                box.prop(prop, 'beam_height')
                box.prop(prop, 'beam_offset')
                box.prop(prop, 'beam_alt')
            box.separator()
            box.prop(prop, 'beam_sec_enable')
            if prop.beam_sec_enable:
                box.prop(prop, 'beam_sec_width')
                box.prop(prop, 'beam_sec_height')
                box.prop(prop, 'beam_sec_alt')
            box.separator()
            box.prop(prop, 'rafter_enable')
            if prop.rafter_enable:
                box.prop(prop, 'rafter_height')
                box.prop(prop, 'rafter_width')
                box.prop(prop, 'rafter_spacing')
                box.prop(prop, 'rafter_start')
                box.prop(prop, 'rafter_alt')

        box = layout.box()
        row = box.row(align=True)
        if prop.gutter_expand:
            row.prop(prop, 'gutter_expand', icon="TRIA_DOWN", text="Gutter", emboss=False)
        else:
            row.prop(prop, 'gutter_expand', icon="TRIA_RIGHT", text="Gutter", emboss=False)
        row.prop(prop, 'gutter_enable')
        if prop.gutter_expand:
            box.prop(prop, 'gutter_alt')
            box.prop(prop, 'gutter_width')
            box.prop(prop, 'gutter_dist')
            box.prop(prop, 'gutter_boudin')
            box.prop(prop, 'gutter_segs')

        box = layout.box()
        row = box.row(align=True)
        if prop.fascia_expand:
            row.prop(prop, 'fascia_expand', icon="TRIA_DOWN", text="Fascia", emboss=False)
        else:
            row.prop(prop, 'fascia_expand', icon="TRIA_RIGHT", text="Fascia", emboss=False)
        row.prop(prop, 'fascia_enable')
        if prop.fascia_expand:
            box.prop(prop, 'fascia_altitude')
            box.prop(prop, 'fascia_width')
            box.prop(prop, 'fascia_height')
            box.prop(prop, 'fascia_offset')

        box = layout.box()
        row = box.row(align=True)
        if prop.bargeboard_expand:
            row.prop(prop, 'bargeboard_expand', icon="TRIA_DOWN", text="Bargeboard", emboss=False)
        else:
            row.prop(prop, 'bargeboard_expand', icon="TRIA_RIGHT", text="Bargeboard", emboss=False)
        row.prop(prop, 'bargeboard_enable')
        if prop.bargeboard_expand:
            box.prop(prop, 'bargeboard_altitude')
            box.prop(prop, 'bargeboard_width')
            box.prop(prop, 'bargeboard_height')
            box.prop(prop, 'bargeboard_offset')

        """
        box = layout.box()
        row.prop_search(prop, "user_defined_path", scene, "objects", text="", icon='OUTLINER_OB_CURVE')
        box.prop(prop, 'user_defined_resolution')
        box.prop(prop, 'angle_limit')
        """


# ------------------------------------------------------------------
# Define operator class to create object
# ------------------------------------------------------------------


class ARCHIPACK_OT_roof(ArchipackCreateTool, Operator):
    bl_idname = "archipack.roof"
    bl_label = "Roof"
    bl_description = "Roof"
    bl_category = 'Archipack'
    bl_options = {'REGISTER', 'UNDO'}

    def create(self, context):
        m = bpy.data.meshes.new("Roof")
        o = bpy.data.objects.new("Roof", m)
        d = m.archipack_roof.add()
        # make manipulators selectable
        d.manipulable_selectable = True
        self.link_object_to_scene(context, o)
        o.select_set(state=True)
        context.view_layer.objects.active = o
        self.add_material(o)

        # disable progress bar when
        # background render thumbs
        if not self.auto_manipulate:
            d.quick_edit = False

        self.load_preset(d)
        return o

    # -----------------------------------------------------
    # Execute
    # -----------------------------------------------------
    def execute(self, context):
        if context.mode == "OBJECT":
            bpy.ops.object.select_all(action="DESELECT")
            o = self.create(context)
            o.location = context.scene.cursor.location
            o.select_set(state=True)
            context.view_layer.objects.active = o
            self.manipulate()
            return {'FINISHED'}
        else:
            self.report({'WARNING'}, "Archipack: Option only valid in Object mode")
            return {'CANCELLED'}


class ARCHIPACK_OT_roof_cutter(ArchipackCreateTool, Operator):
    bl_idname = "archipack.roof_cutter"
    bl_label = "Roof Cutter"
    bl_description = "Roof Cutter"
    bl_category = 'Archipack'
    bl_options = {'REGISTER', 'UNDO'}

    parent : StringProperty("")

    def create(self, context):
        m = bpy.data.meshes.new("Roof Cutter")
        o = bpy.data.objects.new("Roof Cutter", m)
        d = m.archipack_roof_cutter.add()
        parent = context.scene.objects.get(self.parent.strip())
        if parent is not None:
            o.parent = parent
            bbox = parent.bound_box
            angle_90 = pi / 2
            x0, y0, z = bbox[0]
            x1, y1, z = bbox[6]
            x = 0.2 * (x1 - x0)
            y = 0.2 * (y1 - y0)
            o.matrix_world = parent.matrix_world @ Matrix([
                [1, 0, 0, -3 * x],
                [0, 1, 0, 0],
                [0, 0, 1, 0],
                [0, 0, 0, 1]
                ])
            p = d.parts.add()
            p.a0 = - angle_90
            p.length = y
            p = d.parts.add()
            p.a0 = angle_90
            p.length = x
            p = d.parts.add()
            p.a0 = angle_90
            p.length = y
            d.n_parts = 3
            # d.close = True
            pd = archipack_roof.datablock(parent)
            pd.boundary = o.name
        else:
            o.location = context.scene.cursor.location
        # make manipulators selectable
        d.manipulable_selectable = True
        self.link_object_to_scene(context, o)
        o.select_set(state=True)
        context.view_layer.objects.active = o
        self.add_material(o)
        self.load_preset(d)
        update_operation(d, context)
        return o

    # -----------------------------------------------------
    # Execute
    # -----------------------------------------------------
    def execute(self, context):
        if context.mode == "OBJECT":
            bpy.ops.object.select_all(action="DESELECT")
            o = self.create(context)
            o.select_set(state=True)
            context.view_layer.objects.active = o
            self.manipulate()
            return {'FINISHED'}
        else:
            self.report({'WARNING'}, "Archipack: Option only valid in Object mode")
            return {'CANCELLED'}


# ------------------------------------------------------------------
# Define operator class to create object
# ------------------------------------------------------------------


class ARCHIPACK_OT_roof_from_curve(ArchipackCreateTool, Operator):
    bl_idname = "archipack.roof_from_curve"
    bl_label = "Roof curve"
    bl_description = "Create a roof from a curve"
    bl_category = 'Archipack'
    bl_options = {'REGISTER', 'UNDO'}

    auto_manipulate : BoolProperty(default=True)

    @classmethod
    def poll(self, context):
        return context.active_object is not None and context.active_object.type == 'CURVE'

    def draw(self, context):
        layout = self.layout
        row = layout.row()
        row.label(text="Use Properties panel (N) to define parms", icon='INFO')

    def create(self, context):
        curve = context.active_object
        m = bpy.data.meshes.new("Roof")
        o = bpy.data.objects.new("Roof", m)
        d = m.archipack_roof.add()
        # make manipulators selectable
        d.manipulable_selectable = True
        d.user_defined_path = curve.name
        self.link_object_to_scene(context, o)
        o.select_set(state=True)
        context.view_layer.objects.active = o
        d.update_path(context)

        spline = curve.data.splines[0]
        if spline.type == 'POLY':
            pt = spline.points[0].co
        elif spline.type == 'BEZIER':
            pt = spline.bezier_points[0].co
        else:
            pt = Vector((0, 0, 0))
        # pretranslate
        o.matrix_world = curve.matrix_world @ Matrix([
            [1, 0, 0, pt.x],
            [0, 1, 0, pt.y],
            [0, 0, 1, pt.z],
            [0, 0, 0, 1]
            ])
        o.select_set(state=True)
        context.view_layer.objects.active = o
        return o

    # -----------------------------------------------------
    # Execute
    # -----------------------------------------------------
    def execute(self, context):
        if context.mode == "OBJECT":
            bpy.ops.object.select_all(action="DESELECT")
            self.create(context)
            if self.auto_manipulate:
                bpy.ops.archipack.roof_manipulate('INVOKE_DEFAULT')
            return {'FINISHED'}
        else:
            self.report({'WARNING'}, "Archipack: Option only valid in Object mode")
            return {'CANCELLED'}


# ------------------------------------------------------------------
# Define operator class to manipulate object
# ------------------------------------------------------------------


class ARCHIPACK_OT_roof_manipulate(Operator):
    bl_idname = "archipack.roof_manipulate"
    bl_label = "Manipulate"
    bl_description = "Manipulate"
    bl_options = {'REGISTER', 'UNDO'}

    @classmethod
    def poll(self, context):
        return archipack_roof.filter(context.active_object)

    def invoke(self, context, event):
        d = archipack_roof.datablock(context.active_object)
        d.manipulable_invoke(context)
        return {'FINISHED'}


class ARCHIPACK_OT_roof_cutter_manipulate(Operator):
    bl_idname = "archipack.roof_cutter_manipulate"
    bl_label = "Manipulate"
    bl_description = "Manipulate"
    bl_options = {'REGISTER', 'UNDO'}

    @classmethod
    def poll(self, context):
        return archipack_roof_cutter.filter(context.active_object)

    def invoke(self, context, event):
        d = archipack_roof_cutter.datablock(context.active_object)
        d.manipulable_invoke(context)
        return {'FINISHED'}


# Update throttle
class ArchipackThrottleHandler():
    """
        One modal runs for each object at time
        when call for 2nd one
        update timer so first one wait more
        and kill 2nd one
    """
    def __init__(self, context, delay):
        self._timer = None
        self.start = 0
        self.update_state = False
        self.delay = delay

    def start_timer(self, context):
        self.start = time.time()
        self._timer = context.window_manager.event_timer_add(self.delay, window=context.window)

    def stop_timer(self, context):
        if self._timer is not None:
            context.window_manager.event_timer_remove(self._timer)
            self._timer = None

    def execute(self, context):
        """
            refresh timer on execute
            return
                True if modal should run
                False on complete
        """
        if self._timer is None:
            self.update_state = False
            self.start_timer(context)
            return True

        # already a timer running
        self.stop_timer(context)

        # prevent race conditions when already in update mode
        if self.is_updating:
            return False

        self.start_timer(context)
        return False

    def modal(self, context, event):
        if event.type == 'TIMER' and not self.is_updating:
            if time.time() - self.start > self.delay:
                self.update_state = True
                self.stop_timer(context)
                return True
        return False

    @property
    def is_updating(self):
        return self.update_state


throttle_handlers = {}
throttle_delay = 1


class ARCHIPACK_OT_roof_throttle_update(Operator):
    bl_idname = "archipack.roof_throttle_update"
    bl_label = "Update childs with a delay"

    name : StringProperty()

    def kill_handler(self, context, name):
        if name in throttle_handlers.keys():
            throttle_handlers[name].stop_timer(context)
            del throttle_handlers[self.name]

    def get_handler(self, context, delay):
        global throttle_handlers
        if self.name not in throttle_handlers.keys():
            throttle_handlers[self.name] = ArchipackThrottleHandler(context, delay)
        return throttle_handlers[self.name]

    def modal(self, context, event):
        global throttle_handlers
        if self.name in throttle_handlers.keys():
            if throttle_handlers[self.name].modal(context, event):
                act = context.active_object
                o = context.scene.objects.get(self.name.strip())
                # print("delay update of %s" % (self.name))
                if o is not None:
                    selected = o.select_get()
                    o.select_set(state=True)
                    context.view_layer.objects.active = o
                    d = o.data.archipack_roof[0]
                    d.update(context,
                        force_update=True,
                        update_parent=False)
                    # skip_parent_update=self.skip_parent_update)
                    o.select_set(state=selected)
                context.view_layer.objects.active = act
                del throttle_handlers[self.name]
                return {'FINISHED'}
            else:
                return {'PASS_THROUGH'}
        else:
            return {'FINISHED'}

    def execute(self, context):
        global throttle_delay
        handler = self.get_handler(context, throttle_delay)
        if handler.execute(context):
            context.window_manager.modal_handler_add(self)
            return {'RUNNING_MODAL'}
        return {'FINISHED'}


# ------------------------------------------------------------------
# Define operator class to load / save presets
# ------------------------------------------------------------------


class ARCHIPACK_OT_roof_preset_menu(PresetMenuOperator, Operator):
    bl_description = "Show Roof presets"
    bl_idname = "archipack.roof_preset_menu"
    bl_label = "Roof Styles"
    preset_subdir = "archipack_roof"


class ARCHIPACK_OT_roof_preset(ArchipackPreset, Operator):
    """Add a Roof Styles"""
    bl_idname = "archipack.roof_preset"
    bl_label = "Add Roof Style"
    preset_menu = "ARCHIPACK_OT_roof_preset_menu"

    @property
    def blacklist(self):
        return ['n_parts', 'parts', 'manipulators', 'user_defined_path', 'quick_edit', 'draft']


def register():
    # bpy.utils.register_class(archipack_roof_material)
    bpy.utils.register_class(archipack_roof_cutter_segment)
    bpy.utils.register_class(archipack_roof_cutter)
    bpy.utils.register_class(ARCHIPACK_PT_roof_cutter)
    bpy.utils.register_class(ARCHIPACK_OT_roof_cutter)
    bpy.utils.register_class(ARCHIPACK_OT_roof_cutter_manipulate)
    Mesh.archipack_roof_cutter = CollectionProperty(type=archipack_roof_cutter)
    bpy.utils.register_class(archipack_roof_segment)
    bpy.utils.register_class(archipack_roof)
    Mesh.archipack_roof = CollectionProperty(type=archipack_roof)
    bpy.utils.register_class(ARCHIPACK_OT_roof_preset_menu)
    bpy.utils.register_class(ARCHIPACK_PT_roof)
    bpy.utils.register_class(ARCHIPACK_OT_roof)
    bpy.utils.register_class(ARCHIPACK_OT_roof_preset)
    bpy.utils.register_class(ARCHIPACK_OT_roof_manipulate)
    bpy.utils.register_class(ARCHIPACK_OT_roof_from_curve)
    bpy.utils.register_class(ARCHIPACK_OT_roof_throttle_update)


def unregister():
    # bpy.utils.unregister_class(archipack_roof_material)
    bpy.utils.unregister_class(archipack_roof_cutter_segment)
    bpy.utils.unregister_class(archipack_roof_cutter)
    bpy.utils.unregister_class(ARCHIPACK_PT_roof_cutter)
    bpy.utils.unregister_class(ARCHIPACK_OT_roof_cutter)
    bpy.utils.unregister_class(ARCHIPACK_OT_roof_cutter_manipulate)
    del Mesh.archipack_roof_cutter
    bpy.utils.unregister_class(archipack_roof_segment)
    bpy.utils.unregister_class(archipack_roof)
    del Mesh.archipack_roof
    bpy.utils.unregister_class(ARCHIPACK_OT_roof_preset_menu)
    bpy.utils.unregister_class(ARCHIPACK_PT_roof)
    bpy.utils.unregister_class(ARCHIPACK_OT_roof)
    bpy.utils.unregister_class(ARCHIPACK_OT_roof_preset)
    bpy.utils.unregister_class(ARCHIPACK_OT_roof_manipulate)
    bpy.utils.unregister_class(ARCHIPACK_OT_roof_from_curve)
    bpy.utils.unregister_class(ARCHIPACK_OT_roof_throttle_update)