build.yml

name: build

on:
  push:
    branches: [ "v2024.04-solidrun-a38x" ]
  pull_request:
    branches: [ "v2024.04-solidrun-a38x" ]
  # Allows you to run this workflow manually from the Actions tab
  workflow_dispatch:

jobs:
  fetch_compile_publish:
    runs-on: ubuntu-latest
    timeout-minutes: 30
    container:
      image: debian:bookworm-slim
      env:
        DEBIAN_FRONTEND: noninteractive
        CROSS_COMPILE: arm-linux-gnueabihf-
    outputs:
      build_tag: ${{ steps.tag_step.outputs.build_tag }}
      build_ver: ${{ steps.tag_step.outputs.build_ver }}

    steps:
      - name: Install Dependencies
        run: |
          apt-get update
          apt-get upgrade -y
          apt-get install -y bc bison build-essential crossbuild-essential-armhf flex git libncurses-dev libssl-dev

      - name: Checkout pull-request
        uses: actions/checkout@v4

      - name: Get build tag
        id: tag_step
        run: |
          build_tag=$(date +%Y-%m-%d)_$(echo ${{ github.sha }} | cut -c1-7)
          echo "build_tag=$build_tag" >> "$GITHUB_OUTPUT"
          echo "build_ver=v2024.04" >> "$GITHUB_OUTPUT"

      - name: Build Clearfog Pro SD
        shell: bash
        run: |
          make clearfog_defconfig
          make -j$(nproc)
          install -v -m644 -D u-boot-with-spl.kwb deploy/u-boot-clearfog-pro-sd.kwb

      - name: Build Clearfog Pro eMMC data
        shell: bash
        run: |
          make clearfog_defconfig
          ./scripts/config --set-val SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET 0x1000
          make -j$(nproc)
          install -v -m644 -D u-boot-with-spl.kwb deploy/u-boot-clearfog-pro-emmc.kwb

      - name: Build Clearfog Pro eMMC boot0
        shell: bash
        run: |
          make clearfog_defconfig
          ./scripts/config --set-val SYS_MMC_ENV_PART 1
          make -j$(nproc)
          install -v -m644 -D u-boot-with-spl.kwb deploy/u-boot-clearfog-pro-emmc-boot0.kwb

      - name: Build Clearfog Pro eMMC boot1
        shell: bash
        run: |
          make clearfog_defconfig
          ./scripts/config --set-val SYS_MMC_ENV_PART 2
          make -j$(nproc)
          install -v -m644 -D u-boot-with-spl.kwb deploy/u-boot-clearfog-pro-emmc-boot1.kwb

      - name: Build Clearfog Pro SATA
        shell: bash
        run: |
          make clearfog_sata_defconfig
          make -j$(nproc)
          install -v -m644 -D u-boot-with-spl.kwb deploy/u-boot-clearfog-pro-sata.kwb

      - name: Build Clearfog Pro SPI
        shell: bash
        run: |
          make clearfog_spi_defconfig
          make -j$(nproc)
          install -v -m644 -D u-boot-with-spl.kwb deploy/u-boot-clearfog-pro-spi.kwb

      - name: Build Clearfog Pro UART
        shell: bash
        run: |
          make clearfog_defconfig
          ./scripts/config --disable MVEBU_SPL_BOOT_DEVICE_MMC
          ./scripts/config --disable ENV_IS_IN_MMC
          ./scripts/config --disable SPL_MMC
          ./scripts/config --enable MVEBU_SPL_BOOT_DEVICE_UART
          ./scripts/config --enable ENV_IS_NOWHERE
          make -j$(nproc)
          install -v -m644 -D u-boot-with-spl.kwb deploy/u-boot-clearfog-pro-uart.kwb

      - name: Build Clearfog Base SD
        shell: bash
        run: |
          make clearfog_defconfig
          ./scripts/config --enable TARGET_CLEARFOG_BASE
          make -j$(nproc)
          install -v -m644 -D u-boot-with-spl.kwb deploy/u-boot-clearfog-base-sd.kwb

      - name: Build Clearfog Base eMMC data
        shell: bash
        run: |
          make clearfog_defconfig
          ./scripts/config --enable TARGET_CLEARFOG_BASE
          ./scripts/config --set-val SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET 0x1000
          make -j$(nproc)
          install -v -m644 -D u-boot-with-spl.kwb deploy/u-boot-clearfog-base-emmc.kwb

      - name: Build Clearfog Base eMMC boot0
        shell: bash
        run: |
          make clearfog_defconfig
          ./scripts/config --enable TARGET_CLEARFOG_BASE
          ./scripts/config --set-val SYS_MMC_ENV_PART 1
          make -j$(nproc)
          install -v -m644 -D u-boot-with-spl.kwb deploy/u-boot-clearfog-base-emmc-boot0.kwb

      - name: Build Clearfog Base eMMC boot1
        shell: bash
        run: |
          make clearfog_defconfig
          ./scripts/config --enable TARGET_CLEARFOG_BASE
          ./scripts/config --set-val SYS_MMC_ENV_PART 2
          make -j$(nproc)
          install -v -m644 -D u-boot-with-spl.kwb deploy/u-boot-clearfog-base-emmc-boot1.kwb

      - name: Build Clearfog Base SATA
        shell: bash
        run: |
          make clearfog_sata_defconfig
          ./scripts/config --enable TARGET_CLEARFOG_BASE
          make -j$(nproc)
          install -v -m644 -D u-boot-with-spl.kwb deploy/u-boot-clearfog-base-sata.kwb

      - name: Build Clearfog Base SPI
        shell: bash
        run: |
          make clearfog_spi_defconfig
          ./scripts/config --enable TARGET_CLEARFOG_BASE
          make -j$(nproc)
          install -v -m644 -D u-boot-with-spl.kwb deploy/u-boot-clearfog-base-spi.kwb

      - name: Build Clearfog Base UART
        shell: bash
        run: |
          make clearfog_defconfig
          ./scripts/config --enable TARGET_CLEARFOG_BASE
          ./scripts/config --disable MVEBU_SPL_BOOT_DEVICE_MMC
          ./scripts/config --disable ENV_IS_IN_MMC
          ./scripts/config --disable SPL_MMC
          ./scripts/config --enable MVEBU_SPL_BOOT_DEVICE_UART
          ./scripts/config --enable ENV_IS_NOWHERE
          make -j$(nproc)
          install -v -m644 -D u-boot-with-spl.kwb deploy/u-boot-clearfog-base-uart.kwb

      - name: Upload to S3
        uses: shallwefootball/upload-s3-action@v1.3.3
        with:
          aws_key_id: ${{ secrets.IMAGES_S3_ACCESS }}
          aws_secret_access_key: ${{ secrets.IMAGES_S3_SECRET }}
          aws_bucket: ${{ secrets.IMAGES_S3_BUCKET }}
          endpoint: ${{ secrets.IMAGES_S3_HOST }}
          source_dir: deploy
          destination_dir: A38X/U-Boot/${{ steps.tag_step.outputs.build_ver }}/${{ steps.tag_step.outputs.build_tag }}