CISCO-ATM-ACCESS-LIST-MIB.mib

-- *****************************************************************
-- ATM Access MIB file.
--
-- January 1997, Chandrasekaran, Ravikumar
--
-- Copyright (c) 1997 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--

CISCO-ATM-ACCESS-LIST-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE                        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, DisplayString, RowStatus        FROM SNMPv2-TC
    ifIndex                                             FROM IF-MIB
    ciscoMgmt			                        FROM CISCO-SMI
    MODULE-COMPLIANCE, OBJECT-GROUP                     FROM SNMPv2-CONF;

ciscoAtmAccessListMIB   MODULE-IDENTITY
     LAST-UPDATED	"9611100000Z"
     ORGANIZATION	"Cisco Systems, Inc."
     CONTACT-INFO
		"       Cisco Systems
			Customer Service

		Postal: 170 W Tasman Drive
			San Jose, CA  95134
			USA

		   Tel: +1 800 553-NETS

		E-mail: cs-atm@cisco.com"
    DESCRIPTION
            "A cisco ATM access list mib module."
    REVISION        "9611180000Z"
    DESCRIPTION
            "Initial Version of this MIB module."

    ::= { ciscoMgmt 67 }    

ciscoAtmAccessListMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIB 1 }

ciscoAtmAddressTemplate OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBObjects 1 }

ciscoAtmAddressFilter OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBObjects 2 }

ciscoAtmAccessGroup OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBObjects 3 }

-- Textual Conventions:

        CiscoAtmAddressTemplate ::= TEXTUAL-CONVENTION
            STATUS       current
            DESCRIPTION
                "A NSAP address or address template string. If it only contains
                 hexadecimal digits, 20-octet long, it represents a single 
                 NSAP address.
                 For example,
                 47.0091.8100.0000.0060.3e5b.7201.4000.0c    is an NSAP address
                 with no wild cards.

                 If it contains one or more wild-card characters, it then 
                 represents multiple NSAP addresses as follows. An 
                 ellipsis ... matches any number of leading or trailing
                 hexadecimal digits.  
                 For example,
                 12.8344... will match any address that starts with 12.8344 and
                 ...0201.01 will match any address that ends with 0201.01.

                 An asterisk * can be used to match any single 4-bit nibble 
                 in an address string.  
                 For example, in
                 47.8*9*1200000000603E5B7201.00603E5B7201.00 the 2nd nibble of
                 the 2nd most significant byte and 2nd nibble of 3rd most 
                 significant byte will match any 4bit nibble value. 
                 
                 An asterisk (*) enclosed by a pair of parentheses, can also 
                 be used to match any binary bit (0 or 1) in a 4-bit nibble.
                 For example, in
                 ...92(1*0*)8.01  the asterisk within parentheses will match
                 either binary values 0 and 1."
            SYNTAX       DisplayString (SIZE(1..70))

-- This MIB defines the following four tables :
--
-- ciscoAtmAddressTemplateTable
-- 
-- 
-- This table is used to alias the address-templates.  The aliases created
-- in this table may be refered to from ciscoAtmAddressFilterSetTable.
--
-- ciscoAtmAddressFilterSetTable
--
--
-- Each row in this table is either an addressFilter or a timeOfDayFilter.
-- An addressFilter specifies an address-template which can be an actual
-- address-template or an aliasname defined in the ciscoAtmAddressTemplateTable.
-- For example, 
-- Consider the following row as existing already in the 
-- ciscoAtmAddressTemplateTable. 
-- atmAddressAliasName = "aaa" , 
-- atmAddressTemplate."aaa" = "47.8191..." and
-- atmAddressTemplateRowStatus."aaa" = active 
-- 
-- For example, when an object atmAddressFilterSetTemplate."abc" in the 
-- ciscoAtmAddressFilterSetTable is set to a value of "aaa", the value that 
-- gets stored into the object is "47.8191..." which is obtained from the 
-- alias mapping defined by the ciscoAtmAddressTemplateTable.   
-- 
-- If no such alias exists in the ciscoAtmAddressTemplateTable whose row is
-- active, an attempt shall be made to interpret the value as an 
-- address-template itself.  In the above example, if the object 
-- atmAddressTemplateRowStatus."aaa" is not 'active' then this set operation
-- will fail because 'aaa' is not a valid atm address-template. 
--
-- After the creation of the above filter row, any change to the value of 
-- atmAddressTemplate."aaa" will not affect the value of the object
-- atmAddressFilterSetTemplate."abc". 
-- For example, if the value of atmAddressTemplate."aaa" is changed to
-- "...9002.01",  the value of atmAddressFilterSetTemplate."abc" in the above
-- example will still remain "47.8191..." 
-- 
-- Those rows(filters) which have the same atmAddressFilterSetName form a 
-- FilterSet.  These FilterSets can be combined to Form a Filter Expression.
-- These FilterSets can also be associated with an interface as an incoming
-- or an outgoing access-group.
--
-- During call filtering, those filters in the filter-set that specify a 
-- complete 20-byte address with no wild cards are first considered for 
-- matching against the address to be filtered.
-- Only if none of the filters with in a filter-set that specify complete 
-- 20-byte address without wild cards match, other filters are matched
-- against the address to be filtered in the increasing order of their 
-- atmAddressFilterSetIndex values.
--
-- For example, consider the following filter-set "abc"
--
-- atmAddressFilterSetType."abc".1 = addressFilter
-- atmAddressFilterSetTemplate."abc".1 = "47.8191..."
-- atmAddressFilterSetPermission."abc".1 = deny 
-- 
-- the second filter is a complete 20-byte address with no wild cards :
--
-- atmAddressFilterSetType."abc".2 = addressFilter
-- atmAddressFilterSetTemplate."abc".2 = 
--    "47.00918100000000603E5B7201.00603E5B7201.01" 
-- atmAddressFilterSetPermission."abc".2 = deny 
-- 
-- the third filter is  
--
-- atmAddressFilterSetType."abc".5 = addressFilter
-- atmAddressFilterSetTemplate."abc".5 = "...9876.01"
-- atmAddressFilterSetPermission."abc".5 = deny 
--
-- In the above example, the filter with index 2 will be matched first with the
-- address to be filtered.  Only if this filter fails to match,  the filters
-- with atmAddressFilterSetIndex values 1 and 5 will be considered in that
-- order respectively.  If none of the filters match in a filter-set then
-- the default action would be to deny the call.  If this is not desired for a
-- filter-set then a filter with a permission of "permit" and an 
-- address-template value of "..." has to be added to that filter-set as the 
-- last filter i.e., with the highest atmAddressFilterSetIndex value. So those 
-- addresses that dont match any other filter will certainly match the last 
-- default filter and will be permitted to go through.
-- 
-- In the case of the time-of-day filters, if the start-time and the end-time
-- are the same, it represents a 24-hour interval. 
--
-- ciscoAtmAddressFilterExpressionTable
-- 
-- 
-- This Table is used to define filter expressions out of Filter Sets defined
-- in the ciscoAtmAddressFilterSetTable and already existing Filter expressions
-- defined in this table itself.
-- 
-- atmAddressFilterExpressionOperator object in this table supports AND, OR, 
-- XOR, NOT  operators.  The objects atmAddressFilterExpressionTerm1 and 
-- atmAddressFilterExpressionTerm2 represent the operands.  The object
-- atmAddressFilterExpressionTerm2 should not be used for expressions with
-- unary operator or no operator(none(5) operator). 
--
-- atmAddressFilterExpressionTerm1 and atmAddressFilterExpressionTerm2 can 
-- only point to already active Filter Sets/Filter Expressions.  Because of
-- this, atmAddressFilterSetName and atmAddressFilterExpressionName objects
-- shall have values that are unique across both ciscoAtmAddressFilterSetTable 
-- and ciscoAtmAddressFilterExpressionTable.
--
-- Consider a FilterExpressionEntry for example,
-- 
-- atmAddressFilterExpressionOperator."xyz" = NOT
-- atmAddressFilterExpressionTerm1."xyz" = "abc"
--
-- and the filter-set "abc" has three filters defined in it as follows : 
--
-- atmAddressFilterSetType."abc".1 = addressFilter
-- atmAddressFilterSetTemplate."abc".1 = "47.8191..."
-- atmAddressFilterSetPermission."abc".1 = deny 
-- 
-- the second filter is a complete 20-byte address with no wild cards :
--
-- atmAddressFilterSetType."abc".2 = addressFilter
-- atmAddressFilterSetTemplate."abc".2 = 
--    "47.00918100000000603E5B7201.00603E5B7201.01" 
-- atmAddressFilterSetPermission."abc".2 = deny 
-- 
-- the third filter is  
--
-- atmAddressFilterSetType."abc".5 = addressFilter
-- atmAddressFilterSetTemplate."abc".5 = "...9876.01"
-- atmAddressFilterSetPermission."abc".5 = deny 
--
-- If the value of atmAddressFilterSetTemplate."abc".5 is changed to "..."
-- after the filter-expression "xyz" was created,  the change will affect 
-- the filter-expression "xyz" too.   The same would be true if the objects
-- atmAddressFilterExpressionTerm1 and atmAddressFilterExpressionTerm2 refer
-- to already active filter-expressions.
--
--
-- ciscoAtmAccessGroupTable
--
--
-- This table defines the out-going accessGroup and the incoming accessGroup
-- for an interface.  An AccessGroup can be a Filter Set or a Filter Expression.
--


-- ciscoAtmAddressTemplateTable
-- 
-- This is the ATM address template alias table

ciscoAtmAddressTemplateTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CiscoAtmAddressTemplateEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "The ATM address template alias Table.  Entries in this table can be
        created and deleted by setting the atmAddressTemplateRowStatus object
        to appropriate values.  Existing rows can be modified when the row is
        active.  Entries in this table can be created/modified/ deleted through 
        the commands provided by CLI also."
    ::= { ciscoAtmAddressTemplate 1 }

ciscoAtmAddressTemplateEntry OBJECT-TYPE
    SYNTAX     CiscoAtmAddressTemplateEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        " An entry in the address template table."
    INDEX { atmAddressAliasName }
    ::= { ciscoAtmAddressTemplateTable 1 }

CiscoAtmAddressTemplateEntry ::=
    SEQUENCE {
	atmAddressAliasName		DisplayString,
        atmAddressTemplate 		CiscoAtmAddressTemplate,
	atmAddressTemplateRowStatus	RowStatus
	}

atmAddressAliasName    OBJECT-TYPE
    SYNTAX    DisplayString    (SIZE(1..30))
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
       "The alias name for an ATM address template."
    ::= { ciscoAtmAddressTemplateEntry 1}

atmAddressTemplate    OBJECT-TYPE
    SYNTAX   CiscoAtmAddressTemplate 
    MAX-ACCESS     read-create
    STATUS         current
    DESCRIPTION
      "The Address Template to be aliased."
    ::= { ciscoAtmAddressTemplateEntry 2}

atmAddressTemplateRowStatus    OBJECT-TYPE
    SYNTAX    RowStatus
    MAX-ACCESS     read-create
    STATUS         current
    DESCRIPTION
      "To create, delete, read and write a row. Entries in this table can be
       modified on the fly.  For example, value of atmAddressTemplateObject 
       can be changed even when the corresponding atmAddressTemplateRowStatus 
       object indicates that the row is active."
    ::= { ciscoAtmAddressTemplateEntry 3}

-- This group is the ATM address filter set table

ciscoAtmAddressFilterSetTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CiscoAtmAddressFilterSetEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "The ATM address filter set Table.  Entries in this table can be 
        created/deleted by setting the atmAddressFilterSetRowStatus object
        to appropriate values.  Existing entries in this table can be modified
        on the fly.  Entries in this table can be created/modified/deleted
        through the commands provided by the CLI also."
    ::= { ciscoAtmAddressFilter 1 }

ciscoAtmAddressFilterSetEntry OBJECT-TYPE
    SYNTAX     CiscoAtmAddressFilterSetEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        " An entry in the address filter set table."
    INDEX { atmAddressFilterSetName,
            atmAddressFilterSetIndex }
    ::= { ciscoAtmAddressFilterSetTable 1 }

CiscoAtmAddressFilterSetEntry ::=
    SEQUENCE {
	atmAddressFilterSetName		DisplayString,
	atmAddressFilterSetIndex     	INTEGER,
        atmAddressFilterSetType		INTEGER,     
        atmAddressFilterSetTemplate	DisplayString,
        atmAddressFilterSetStartHour	INTEGER,
        atmAddressFilterSetStartMinute	INTEGER,
        atmAddressFilterSetEndHour	INTEGER,
        atmAddressFilterSetEndMinute	INTEGER,
        atmAddressFilterSetPermission	INTEGER,     
	atmAddressFilterSetRowStatus	RowStatus
	}

atmAddressFilterSetName    OBJECT-TYPE
    SYNTAX    DisplayString    (SIZE(1..30))
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
       "The name for an ATM address filter set."
    ::= { ciscoAtmAddressFilterSetEntry 1}

atmAddressFilterSetIndex    OBJECT-TYPE
    SYNTAX    INTEGER (1..65535)
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
       "The Index for a Filter in an ATM address filter set. The filters are 
	matched in the ascending order of atmAddressFilterSetIndex.  A filter
	with a lower atmAddressFilterSetIndex value is matched prior to a 
	filter with a higher atmAddressFilterSetIndex value.  The only 
	exception to this rule are those address filters that specify all 
 	20-bytes without using wildcards.  These filters are matched before 
        any other wildcard filter in a filter-set irrespective of the 
        atmAddressFilterSetIndex value." 
    ::= { ciscoAtmAddressFilterSetEntry 2}

atmAddressFilterSetType    OBJECT-TYPE
    SYNTAX    INTEGER {
              addressFilter(1),
              timeOfDayFilter(2)
    }
    MAX-ACCESS     read-create    
    STATUS         current
    DESCRIPTION
       "Indicates the type of a filter whether atm Address filter or a 
        Time-of-day filter. If the value of this object is addressFilter(1) 
        then the objects atmAddressFilterSetStartHour,
        atmAddressFilterSetStartMinute, atmAddressFilterSetEndHour and 
        atmAddressFilterSetEndMinute shall contain only the default values and 
        cannot be set to any other value. If the value of this object is 
        timeOfDayFilter(2) then the object atmAddressFilterSetTemplate shall 
        contain only the default value and cannot be set to any other value.  
        If the value of this object is modified to timeOfDayFilter(2),
        for an existing addressFilter row, the corresponding 
        atmAddressFilterSetTemplate object will be set to its default value 
        automatically.  If the value of this object is modified to 
        addressFilter(1) for an existing timeOfDayFilter row, the corresponding 
        objects atmAddressFilterSetStartHour, atmAddressFilterSetStartMinute,
        atmAddressFilterSetEndHour and atmAddressFilterSetEndMinute
        will be set to their default values automatically."
    DEFVAL { addressFilter } 
    ::= { ciscoAtmAddressFilterSetEntry 3}

atmAddressFilterSetTemplate    OBJECT-TYPE
    SYNTAX    DisplayString    (SIZE(1..70))
    MAX-ACCESS     read-create
    STATUS         current
    DESCRIPTION
      "This is either an existing atmAddressAliasName, or an ATM address 
       template, as described in the CiscoAtmAddressTemplate.  If the value 
       of this object matches an atmAddressAliasName in the
       ciscoAtmAddressTemplateTable, then the value of the corresponding 
       atmAddressTemplate object will be used.  And subsequent attempts to 
       read this object will return the address-template instead of the alias 
       name. Only if a such a match is not found in ciscoAtmAddressTemplateTable,
       an attempt can be made to interpret this object as a 
       CiscoAtmAddressTemplate. The value of this object shall be '...' and 
       cannot be set to any other value if a filter is of the type 
       timeOfDayFilter"
    DEFVAL { "..." } 
    ::= { ciscoAtmAddressFilterSetEntry 4}

atmAddressFilterSetStartHour    OBJECT-TYPE
    SYNTAX    INTEGER (0..23)
    MAX-ACCESS     read-create    
    STATUS         current
    DESCRIPTION
       "Indicates the Hours portion of the Start time of a Time-of-day
        filter.  If the value of atmAddressFilterSetType object is 
        addressFilter, then this object cannot be set and shall only 
        contain the default value" 
    DEFVAL { 0 } 
    ::= { ciscoAtmAddressFilterSetEntry 5}

atmAddressFilterSetStartMinute    OBJECT-TYPE
    SYNTAX    INTEGER (0..59)
    MAX-ACCESS     read-create    
    STATUS         current
    DESCRIPTION
       "Indicates the Minutes portion of the Start time of a Time-of-day
        filter. If the value of atmAddressFilterSetType object is 
        addressFilter, then this object cannot be set and shall only 
        contain the default value"
    DEFVAL { 0 } 
    ::= { ciscoAtmAddressFilterSetEntry 6}

atmAddressFilterSetEndHour    OBJECT-TYPE
    SYNTAX    INTEGER (0..23)
    MAX-ACCESS     read-create    
    STATUS         current
    DESCRIPTION
       "Indicates the Hours portion of the End time of a Time-of-day
        filter.  If the value of atmAddressFilterSetType object is 
        addressFilter, then this object cannot be set and shall only 
        contain the default value"
    DEFVAL { 0 } 
    ::= { ciscoAtmAddressFilterSetEntry 7}

atmAddressFilterSetEndMinute    OBJECT-TYPE
    SYNTAX    INTEGER (0..59)
    MAX-ACCESS     read-create    
    STATUS         current
    DESCRIPTION
       "Indicates the Minutes portion of the End time of a Time-of-day
        filter. If the value of atmAddressFilterSetType object is 
        addressFilter, then this object cannot be set and shall only 
        contain the default value"
    DEFVAL { 0 } 
    ::= { ciscoAtmAddressFilterSetEntry 8}

atmAddressFilterSetPermission    OBJECT-TYPE
    SYNTAX    INTEGER { permit(1), deny(2) }    
    MAX-ACCESS     read-create    
    STATUS         current
    DESCRIPTION
       "Indicates the action of a filter set (either permit or deny), when
        a specific ATM address matches with the atmAddressFilterSetTemplate
        defined in this address filter set in case of an addressFilter or 
        when the current time falls in the interval specified by the  
        atmAddressFilterSetStartHour, atmAddressFiltersetStartMinute,
        atmAddressFilterSetEndHour and atmAddressFiltersetEndMinute objects
        in case of a timeOfDayFilter."
    DEFVAL { permit } 
    ::= { ciscoAtmAddressFilterSetEntry 9}

atmAddressFilterSetRowStatus    OBJECT-TYPE
    SYNTAX    RowStatus
    MAX-ACCESS     read-create
    STATUS         current
    DESCRIPTION
      "To create, delete, read and write a row. Entries in this table can be
       modified on the fly.  For exmaple, atmAddressFilterSetTemplate object 
       of an existing addressFilter can be modified even if the value of the
       corresponding atmAddressFilterSetRowStatus object indicates that the
       row is active."
    ::= { ciscoAtmAddressFilterSetEntry 10}

-- This group is the ATM address filter expression table

ciscoAtmAddressFilterExpressionTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CiscoAtmAddressFilterExpressionEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "The ATM address filter expression table. Entries in this table can be
        created/deleted by setting the atmAddressFilterExpressionRowStatus
        object to appropriate values. Existing entries in this table cannot be
        modified on the fly.  Before an existing active entry can be modified, 
        it has to be brought to notInService by setting the corresponding 
        atmAddressFilterExpressionRowStatus object to notInService.  Entries
        in this table can also be created/modified/deleted through the commands
        provided by the CLI." 
    ::= { ciscoAtmAddressFilter 2 }

ciscoAtmAddressFilterExpressionEntry OBJECT-TYPE
    SYNTAX     CiscoAtmAddressFilterExpressionEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        " An entry in the address filter expression table."
    INDEX { atmAddressFilterExpressionName }
    ::= { ciscoAtmAddressFilterExpressionTable 1 }

CiscoAtmAddressFilterExpressionEntry ::=
    SEQUENCE {
	atmAddressFilterExpressionName		DisplayString,
        atmAddressFilterExpressionQualifier1	INTEGER,      
        atmAddressFilterExpressionTerm1		DisplayString,
        atmAddressFilterExpressionQualifier2	INTEGER,      
        atmAddressFilterExpressionTerm2		DisplayString,
        atmAddressFilterExpressionOperator	INTEGER,     
	atmAddressFilterExpressionRowStatus	RowStatus
	}

atmAddressFilterExpressionName    OBJECT-TYPE
    SYNTAX    	DisplayString    (SIZE(1..30))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The name for an ATM address filter expression."
    ::= { ciscoAtmAddressFilterExpressionEntry 1}

atmAddressFilterExpressionQualifier1   OBJECT-TYPE
    SYNTAX    INTEGER { source(1), destination(2), none(3) }    
    MAX-ACCESS     read-create    
    STATUS         current
    DESCRIPTION
       "This object indicates the ATM filter set specified by the 
        atmAddressFilterExpressionTerm1 should be  applied to either the
        source (calling party) or destination (called party) ATM address.
        atmAddressFilterExpressionQualifier1 shall be none(3) if 
        atmAddressFilterExpressionTerm1 is a Filter Expression or a
        timeOfDayFilter.  The value of this object can be modified for 
        an existing row only after placing that row notInService by setting
        the corresponding atmAddressFilterExpressionRowStatus object to
        notInService(2)."
    DEFVAL { destination } 
    ::= { ciscoAtmAddressFilterExpressionEntry 2}

atmAddressFilterExpressionTerm1    OBJECT-TYPE
    SYNTAX    	DisplayString    (SIZE(1..30))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
      "This object is the name of the first ATM address filter set or ATM 
       address filter expression used in the logical expression. The 
       value of this object can only be either an already existing 
       atmAddressFilterSetName whose row is already active in the 
       ciscoAtmAddressFilterSetTable or an atmAddressFilterExpressionName 
       whose row is already active in the ciscoAtmAddressFilterExpressionTable. 
       When the reference that this object is pointing to gets deleted out from 
       under it, this object may have a value that does not exist in both
       ciscoAtmAddressFilterSetTable and ciscoAtmAddressFilterExpressionTable 
       and the expression will be evaluated as if the deleted filter resulted 
       in a match with a permission of 'permit'. The value of this object can 
       be modified for an existing row only after placing that row notInService
       by setting the corresponding atmAddressFilterExpressionRowStatus object 
       to notInService." 
    ::= { ciscoAtmAddressFilterExpressionEntry 3}

atmAddressFilterExpressionQualifier2    OBJECT-TYPE
    SYNTAX    INTEGER { source(1), destination(2), none(3) }    
    MAX-ACCESS     read-create    
    STATUS         current
    DESCRIPTION
       "Indicates the ATM filter set or filter expression specified by the
        atmAddressFilterExpressionTerm2 should be applied to either the
        source (calling party) or destination (called party) ATM address.
        It is not used if the logical operator is NOT. 
        atmAddressFilterExpressionQualifier2 shall be none(3) if 
        atmAddressFilterExpressionTerm2 is a Filter Expression or 
        timeOfDayFilter.  The value of this object can be modified for an
        existing row only after placing the row notInService by setting
        the corresponding atmAddressFilterExpressionRowStatus object to
        notInService(2)."
    DEFVAL { destination } 
    ::= { ciscoAtmAddressFilterExpressionEntry 4}

atmAddressFilterExpressionTerm2    OBJECT-TYPE
    SYNTAX    	DisplayString    (SIZE(0..30))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
      "The name of the second ATM address filter set or ATM address filter 
       expression used in the logical expression. The value of this object 
       can only be either an existing atmAddressFilterSetName whose row is 
       already active in the ciscoAtmAddressFilterSetTable or an existing 
       atmAddressFilterExpressionName whose row is already active in the 
       ciscoAtmAddressFilterExpressionTable.  The value of this object shall 
       be null if the value of corresponding atmAddressFilterExpressionOperator
       object is not(4) or none(5).  When the reference that this object is 
       pointing to gets deleted out from under it, this object may have a value 
       that does not exist in both ciscoAtmAddressFilterExpressionTable and 
       ciscoAtmAddressFilterSetTable and the expression will be evaluated 
       as if the deleted filter resulted in a match with a permission of 
       'permit'.  The value of this object can be modified for an existing 
       row only after placing that row notInService by setting the respective 
       atmAddressFilterExpressionRowStatus object to the value notInService." 
    ::= { ciscoAtmAddressFilterExpressionEntry 5}

atmAddressFilterExpressionOperator    OBJECT-TYPE
    SYNTAX    INTEGER { and(1), or(2), xor(3), not(4), none(5) }    
    MAX-ACCESS     read-create    
    STATUS         current
    DESCRIPTION
       "The logical operator to be applied to the associated ATM address
        filter logical expression.  The value of this object can be modified
        for an existing row only after placing that row notInService by setting 
        the corresponding atmAddressFilterExpressionRowStatus object to the 
        value notInService." 
    ::= { ciscoAtmAddressFilterExpressionEntry 6}

atmAddressFilterExpressionRowStatus    OBJECT-TYPE
    SYNTAX    	RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
      "To create, delete, read and write a row.  Existing entries in this table
       that are active cannot be modified on the fly. Before an existing entry 
       in this table that is active can be modified, the corresponding 
       atmAddressFilterExpressionRowStatus object has to be set to notInService."
    ::= { ciscoAtmAddressFilterExpressionEntry 7}

-- This group is the ATM access group table

ciscoAtmAccessGroupTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CiscoAtmAccessGroupEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "The ATM access group Table.  This table shall only include interfaces 
        whose ifType is atm(37) or logicalAtm(80).  Entries in this table can 
        be modified through the commands provided by the CLI also."
    ::= { ciscoAtmAccessGroup 1 }

ciscoAtmAccessGroupEntry OBJECT-TYPE
    SYNTAX     CiscoAtmAccessGroupEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "An entry in the ATM access group table.  This table shall only 
         include interfaces whose ifType is atm(37) or logicalAtm(80)"
    INDEX { ifIndex }
    ::= { ciscoAtmAccessGroupTable 1 }

CiscoAtmAccessGroupEntry ::=
    SEQUENCE {
        atmInboundAccessGroupName    	DisplayString,
        atmOutboundAccessGroupName	DisplayString 
	}

atmInboundAccessGroupName    OBJECT-TYPE
    SYNTAX    DisplayString    (SIZE(0..30))
    MAX-ACCESS     read-write
    STATUS         current
    DESCRIPTION
      "The name of an ATM address filter set or expression used for access
       control for inbound call on the associated interface."
    ::= { ciscoAtmAccessGroupEntry 1}

atmOutboundAccessGroupName    OBJECT-TYPE
    SYNTAX    DisplayString    (SIZE(0..30))
    MAX-ACCESS     read-write
    STATUS         current
    DESCRIPTION
      "The name of an ATM address filter set or expression used for access
       control for outbound call on the associated interface."
    ::= { ciscoAtmAccessGroupEntry 2}


-- conformance information

ciscoAtmAccessListMIBConformance
              OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIB 3 }
ciscoAtmAccessListMIBCompliances
              OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBConformance 1 }
ciscoAtmAccessListMIBGroups
              OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBConformance 2 }


-- compliance statements

ciscoAtmAccessListMIBCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for the Cisco ATM access list group."
    MODULE  -- this module
            MANDATORY-GROUPS { ciscoAtmAccessListMIBGroup }

    ::= { ciscoAtmAccessListMIBCompliances 1 }

-- units of conformance

ciscoAtmAccessListMIBGroup  OBJECT-GROUP
    OBJECTS { 
        atmAddressTemplate,
	atmAddressTemplateRowStatus,
        atmAddressFilterSetType,
        atmAddressFilterSetTemplate,
        atmAddressFilterSetStartHour,
        atmAddressFilterSetStartMinute,
        atmAddressFilterSetEndHour,
        atmAddressFilterSetEndMinute,
        atmAddressFilterSetPermission,
	atmAddressFilterSetRowStatus,
        atmAddressFilterExpressionQualifier1,
        atmAddressFilterExpressionTerm1,
        atmAddressFilterExpressionQualifier2,
        atmAddressFilterExpressionTerm2,
        atmAddressFilterExpressionOperator,
	atmAddressFilterExpressionRowStatus,
        atmInboundAccessGroupName,
        atmOutboundAccessGroupName
    }
    STATUS    current
    DESCRIPTION
      ""
    ::= { ciscoAtmAccessListMIBGroups 1 }
END