add(board): Added FoBE Quill ESP32S3 Mesh board support

- Introduced new variant files including pins_arduino.h, variant.cpp, and bootloader configurations.
- Added definitions for USB, GPIO, and various peripherals.
- Included binary files for tinyuf2 bootloader and firmware.

Signed-off-by: Chiho Sin <chihosin@icloud.com>

Author: chihosin

boards.txt

@@ -51573,3 +51573,218 @@ fed4.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
 fed4.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
+
+# FoBE Quill ESP32S3 Mesh FH4R2
+
+fobe_quill_esp32s3_mesh.name=FoBE Quill ESP32S3 Mesh
+fobe_quill_esp32s3_mesh.vid.0=0x303a
+fobe_quill_esp32s3_mesh.pid.0=0x82f4
+fobe_quill_esp32s3_mesh.vid.1=0x303a
+fobe_quill_esp32s3_mesh.vid.1=0x82f5
+fobe_quill_esp32s3_mesh.vid.2=0x303a
+fobe_quill_esp32s3_mesh.pid.2=0x82f6
+
+fobe_quill_esp32s3_mesh.bootloader.tool=esptool_py
+fobe_quill_esp32s3_mesh.bootloader.tool.default=esptool_py
+
+fobe_quill_esp32s3_mesh.upload.tool=esptool_py
+fobe_quill_esp32s3_mesh.upload.tool.default=esptool_py
+fobe_quill_esp32s3_mesh.upload.tool.network=esp_ota
+
+fobe_quill_esp32s3_mesh.upload.maximum_size=1310720
+fobe_quill_esp32s3_mesh.upload.maximum_data_size=327680
+fobe_quill_esp32s3_mesh.upload.flags=
+fobe_quill_esp32s3_mesh.upload.extra_flags=
+fobe_quill_esp32s3_mesh.upload.use_1200bps_touch=true
+fobe_quill_esp32s3_mesh.upload.wait_for_upload_port=true
+
+fobe_quill_esp32s3_mesh.serial.disableDTR=false
+fobe_quill_esp32s3_mesh.serial.disableRTS=false
+
+fobe_quill_esp32s3_mesh.build.tarch=xtensa
+fobe_quill_esp32s3_mesh.build.bootloader_addr=0x0
+fobe_quill_esp32s3_mesh.build.target=esp32s3
+fobe_quill_esp32s3_mesh.build.mcu=esp32s3
+fobe_quill_esp32s3_mesh.build.core=esp32
+fobe_quill_esp32s3_mesh.build.variant=fobe_quill_esp32s3_mesh
+fobe_quill_esp32s3_mesh.build.board=FOBE_QUILL_ESP32S3_MESH
+
+fobe_quill_esp32s3_mesh.build.usb_mode=0
+fobe_quill_esp32s3_mesh.build.cdc_on_boot=1
+fobe_quill_esp32s3_mesh.build.msc_on_boot=0
+fobe_quill_esp32s3_mesh.build.dfu_on_boot=0
+fobe_quill_esp32s3_mesh.build.f_cpu=240000000L
+fobe_quill_esp32s3_mesh.build.flash_size=4MB
+fobe_quill_esp32s3_mesh.build.flash_freq=80m
+fobe_quill_esp32s3_mesh.build.flash_mode=qio
+fobe_quill_esp32s3_mesh.build.boot=qio
+fobe_quill_esp32s3_mesh.build.boot_freq=80m
+fobe_quill_esp32s3_mesh.build.partitions=ffat
+fobe_quill_esp32s3_mesh.build.defines=
+fobe_quill_esp32s3_mesh.build.loop_core=
+fobe_quill_esp32s3_mesh.build.event_core=
+fobe_quill_esp32s3_mesh.build.psram_type=qspi
+fobe_quill_esp32s3_mesh.build.memory_type={build.boot}_{build.psram_type}
+
+fobe_quill_esp32s3_mesh.menu.JTAGAdapter.default=Disabled
+fobe_quill_esp32s3_mesh.menu.JTAGAdapter.default.build.copy_jtag_files=0
+fobe_quill_esp32s3_mesh.menu.JTAGAdapter.builtin=Integrated USB JTAG
+fobe_quill_esp32s3_mesh.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
+fobe_quill_esp32s3_mesh.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
+fobe_quill_esp32s3_mesh.menu.JTAGAdapter.external=FTDI Adapter
+fobe_quill_esp32s3_mesh.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
+fobe_quill_esp32s3_mesh.menu.JTAGAdapter.external.build.copy_jtag_files=1
+fobe_quill_esp32s3_mesh.menu.JTAGAdapter.bridge=ESP USB Bridge
+fobe_quill_esp32s3_mesh.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
+fobe_quill_esp32s3_mesh.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
+
+fobe_quill_esp32s3_mesh.menu.PSRAM.disabled=Disabled
+fobe_quill_esp32s3_mesh.menu.PSRAM.disabled.build.defines=
+fobe_quill_esp32s3_mesh.menu.PSRAM.disabled.build.psram_type=qspi
+fobe_quill_esp32s3_mesh.menu.PSRAM.enabled=QSPI PSRAM
+fobe_quill_esp32s3_mesh.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
+fobe_quill_esp32s3_mesh.menu.PSRAM.enabled.build.psram_type=qspi
+
+fobe_quill_esp32s3_mesh.menu.FlashMode.qio=QIO 80MHz
+fobe_quill_esp32s3_mesh.menu.FlashMode.qio.build.flash_mode=dio
+fobe_quill_esp32s3_mesh.menu.FlashMode.qio.build.boot=qio
+fobe_quill_esp32s3_mesh.menu.FlashMode.qio.build.boot_freq=80m
+fobe_quill_esp32s3_mesh.menu.FlashMode.qio.build.flash_freq=80m
+fobe_quill_esp32s3_mesh.menu.FlashMode.dio=DIO 80MHz
+fobe_quill_esp32s3_mesh.menu.FlashMode.dio.build.flash_mode=dio
+fobe_quill_esp32s3_mesh.menu.FlashMode.dio.build.boot=dio
+fobe_quill_esp32s3_mesh.menu.FlashMode.dio.build.boot_freq=80m
+fobe_quill_esp32s3_mesh.menu.FlashMode.dio.build.flash_freq=80m
+
+fobe_quill_esp32s3_mesh.menu.FlashSize.4M=4MB (32Mb)
+fobe_quill_esp32s3_mesh.menu.FlashSize.4M.build.flash_size=4MB
+
+fobe_quill_esp32s3_mesh.menu.LoopCore.1=Core 1
+fobe_quill_esp32s3_mesh.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
+fobe_quill_esp32s3_mesh.menu.LoopCore.0=Core 0
+fobe_quill_esp32s3_mesh.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
+
+fobe_quill_esp32s3_mesh.menu.EventsCore.1=Core 1
+fobe_quill_esp32s3_mesh.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
+fobe_quill_esp32s3_mesh.menu.EventsCore.0=Core 0
+fobe_quill_esp32s3_mesh.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
+
+fobe_quill_esp32s3_mesh.menu.USBMode.hwcdc=Hardware CDC and JTAG
+fobe_quill_esp32s3_mesh.menu.USBMode.hwcdc.build.usb_mode=1
+fobe_quill_esp32s3_mesh.menu.USBMode.default=USB-OTG (TinyUSB)
+fobe_quill_esp32s3_mesh.menu.USBMode.default.build.usb_mode=0
+
+fobe_quill_esp32s3_mesh.menu.CDCOnBoot.default=Enabled
+fobe_quill_esp32s3_mesh.menu.CDCOnBoot.default.build.cdc_on_boot=1
+fobe_quill_esp32s3_mesh.menu.CDCOnBoot.cdc=Disabled
+fobe_quill_esp32s3_mesh.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
+
+fobe_quill_esp32s3_mesh.menu.MSCOnBoot.default=Disabled
+fobe_quill_esp32s3_mesh.menu.MSCOnBoot.default.build.msc_on_boot=0
+fobe_quill_esp32s3_mesh.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
+fobe_quill_esp32s3_mesh.menu.MSCOnBoot.msc.build.msc_on_boot=1
+
+fobe_quill_esp32s3_mesh.menu.DFUOnBoot.default=Disabled
+fobe_quill_esp32s3_mesh.menu.DFUOnBoot.default.build.dfu_on_boot=0
+fobe_quill_esp32s3_mesh.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
+fobe_quill_esp32s3_mesh.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
+
+fobe_quill_esp32s3_mesh.menu.UploadMode.default=UART0 / Hardware CDC
+fobe_quill_esp32s3_mesh.menu.UploadMode.default.upload.use_1200bps_touch=false
+fobe_quill_esp32s3_mesh.menu.UploadMode.default.upload.wait_for_upload_port=false
+fobe_quill_esp32s3_mesh.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
+fobe_quill_esp32s3_mesh.menu.UploadMode.cdc.upload.use_1200bps_touch=true
+fobe_quill_esp32s3_mesh.menu.UploadMode.cdc.upload.wait_for_upload_port=true
+
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FATFS)
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-4MB
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.tinyuf2_noota=TinyUF2 4MB No OTA (2.7MB APP/960KB FATFS)
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-4MB-noota
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=2883584
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.default.build.partitions=default
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.minimal.build.partitions=minimal
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.no_ota.build.partitions=no_ota
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.huge_app.build.partitions=huge_app
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
+fobe_quill_esp32s3_mesh.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
+
+fobe_quill_esp32s3_mesh.menu.CPUFreq.240=240MHz (WiFi)
+fobe_quill_esp32s3_mesh.menu.CPUFreq.240.build.f_cpu=240000000L
+fobe_quill_esp32s3_mesh.menu.CPUFreq.160=160MHz (WiFi)
+fobe_quill_esp32s3_mesh.menu.CPUFreq.160.build.f_cpu=160000000L
+fobe_quill_esp32s3_mesh.menu.CPUFreq.80=80MHz (WiFi)
+fobe_quill_esp32s3_mesh.menu.CPUFreq.80.build.f_cpu=80000000L
+fobe_quill_esp32s3_mesh.menu.CPUFreq.40=40MHz
+fobe_quill_esp32s3_mesh.menu.CPUFreq.40.build.f_cpu=40000000L
+fobe_quill_esp32s3_mesh.menu.CPUFreq.20=20MHz
+fobe_quill_esp32s3_mesh.menu.CPUFreq.20.build.f_cpu=20000000L
+fobe_quill_esp32s3_mesh.menu.CPUFreq.10=10MHz
+fobe_quill_esp32s3_mesh.menu.CPUFreq.10.build.f_cpu=10000000L
+
+fobe_quill_esp32s3_mesh.menu.UploadSpeed.921600=921600
+fobe_quill_esp32s3_mesh.menu.UploadSpeed.921600.upload.speed=921600
+fobe_quill_esp32s3_mesh.menu.UploadSpeed.115200=115200
+fobe_quill_esp32s3_mesh.menu.UploadSpeed.115200.upload.speed=115200
+fobe_quill_esp32s3_mesh.menu.UploadSpeed.256000.windows=256000
+fobe_quill_esp32s3_mesh.menu.UploadSpeed.256000.upload.speed=256000
+fobe_quill_esp32s3_mesh.menu.UploadSpeed.230400.windows.upload.speed=256000
+fobe_quill_esp32s3_mesh.menu.UploadSpeed.230400=230400
+fobe_quill_esp32s3_mesh.menu.UploadSpeed.230400.upload.speed=230400
+fobe_quill_esp32s3_mesh.menu.UploadSpeed.460800.linux=460800
+fobe_quill_esp32s3_mesh.menu.UploadSpeed.460800.macosx=460800
+fobe_quill_esp32s3_mesh.menu.UploadSpeed.460800.upload.speed=460800
+fobe_quill_esp32s3_mesh.menu.UploadSpeed.512000.windows=512000
+fobe_quill_esp32s3_mesh.menu.UploadSpeed.512000.upload.speed=512000
+
+fobe_quill_esp32s3_mesh.menu.DebugLevel.none=None
+fobe_quill_esp32s3_mesh.menu.DebugLevel.none.build.code_debug=0
+fobe_quill_esp32s3_mesh.menu.DebugLevel.error=Error
+fobe_quill_esp32s3_mesh.menu.DebugLevel.error.build.code_debug=1
+fobe_quill_esp32s3_mesh.menu.DebugLevel.warn=Warn
+fobe_quill_esp32s3_mesh.menu.DebugLevel.warn.build.code_debug=2
+fobe_quill_esp32s3_mesh.menu.DebugLevel.info=Info
+fobe_quill_esp32s3_mesh.menu.DebugLevel.info.build.code_debug=3
+fobe_quill_esp32s3_mesh.menu.DebugLevel.debug=Debug
+fobe_quill_esp32s3_mesh.menu.DebugLevel.debug.build.code_debug=4
+fobe_quill_esp32s3_mesh.menu.DebugLevel.verbose=Verbose
+fobe_quill_esp32s3_mesh.menu.DebugLevel.verbose.build.code_debug=5
+
+fobe_quill_esp32s3_mesh.menu.EraseFlash.none=Disabled
+fobe_quill_esp32s3_mesh.menu.EraseFlash.none.upload.erase_cmd=
+fobe_quill_esp32s3_mesh.menu.EraseFlash.all=Enabled
+fobe_quill_esp32s3_mesh.menu.EraseFlash.all.upload.erase_cmd=-e
+
+fobe_quill_esp32s3_mesh.menu.ZigbeeMode.default=Disabled
+fobe_quill_esp32s3_mesh.menu.ZigbeeMode.default.build.zigbee_mode=
+fobe_quill_esp32s3_mesh.menu.ZigbeeMode.default.build.zigbee_libs=
+fobe_quill_esp32s3_mesh.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
+fobe_quill_esp32s3_mesh.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
+fobe_quill_esp32s3_mesh.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
+
+##############################################################

variants/fobe_quill_esp32s3_mesh/bootloader-tinyuf2.bin

@@ -0,0 +1,107 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+#define USB_VID          0x303A
+#define USB_PID          0x82F4
+#define USB_MANUFACTURER "FoBE Studio"
+#define USB_PRODUCT      "FoBE Quill ESP32S3 Mesh"
+#define USB_SERIAL       ""  // Empty string for MAC address
+
+// User LED
+#define LED_BUILTIN 11
+#define BUILTIN_LED LED_BUILTIN  // backward compatibility
+
+/*
+ * Battery
+ */
+#define PIN_VBAT (10)
+
+/*
+ * Buttons
+ */
+#define PIN_BUTTON1 (0)
+
+/*
+ * Serial interfaces
+ */
+static const uint8_t TX = 9;
+static const uint8_t RX = 8;
+
+/*
+ * Wire Interfaces
+ */
+static const uint8_t SDA = 14;
+static const uint8_t SCL = 13;
+
+/*
+ * SPI interfaces
+ */
+static const uint8_t SS = 45;
+static const uint8_t MOSI = 39;
+static const uint8_t SCK = 40;
+static const uint8_t MISO = 41;
+
+/*
+ * Screen
+ */
+#define PIN_OLED_SDA (14)
+#define PIN_OLED_SCL (13)
+#define PIN_OLED_EN  (12)
+
+/*
+ * LoRa
+ */
+#define PIN_SX126X_NSS   (45)
+#define PIN_SX126X_DIO1  (42)
+#define PIN_SX126X_BUSY  (43)
+#define PIN_SX126X_RESET (44)
+#define PIN_SX126X_TXEN  (-1)
+#define PIN_SX126X_RXEN  (46)
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+/*
+ * MFP
+ */
+#define PIN_MFP1 (38)
+#define PIN_MFP2 (37)
+#define PIN_MFP3 (36)
+#define PIN_MFP4 (35)
+
+/*
+ * Power
+ */
+#define PIN_PERI_EN (1)
+
+/*
+ * PINs
+ */
+static const uint8_t A0 = 2;
+static const uint8_t A1 = 3;
+static const uint8_t A2 = 4;
+static const uint8_t A3 = 5;
+static const uint8_t A4 = 6;
+static const uint8_t A5 = 7;
+static const uint8_t D0 = 8;
+static const uint8_t D1 = 9;
+static const uint8_t D2 = 11;
+static const uint8_t D3 = 38;
+static const uint8_t D4 = 37;
+static const uint8_t D5 = 36;
+static const uint8_t D6 = 35;
+static const uint8_t D7 = 34;
+static const uint8_t D8 = 33;
+static const uint8_t D9 = 47;
+static const uint8_t D10 = 48;
+static const uint8_t D11 = 21;
+static const uint8_t D12 = 18;
+static const uint8_t D13 = 17;
+static const uint8_t MTCK = 39;
+static const uint8_t MTDO = 40;
+static const uint8_t MTDI = 41;
+static const uint8_t MTMS = 42;
+
+#endif /* Pins_Arduino_h */

variants/fobe_quill_esp32s3_mesh/pins_arduino.h

@@ -0,0 +1,15 @@
+#include "esp32-hal-gpio.h"
+#include "pins_arduino.h"
+
+extern "C" {
+
+void initVariant(void) {
+  // Turn on the peripheral power
+  pinMode(PIN_PERI_EN, OUTPUT);
+  digitalWrite(PIN_PERI_EN, HIGH);
+
+  // Turn on the OLED power
+  pinMode(PIN_OLED_EN, OUTPUT);
+  digitalWrite(PIN_OLED_EN, LOW);
+}
+}