Skip to content

Latest commit

 

History

History
 
 

project_10_MPC_control

README.md

CarND-Controls-MPC

Self-Driving Car Engineer Nanodegree Program

Project Description

Overview

Model predictive control (MPC) is an advanced method of process control which relies on dynamic models of the process. Differently from previously implemented PID controller, MPC controller has the ability to anticipate future events and can take control actions accordingly. Indeed, future time steps are taking into account while optimizing current time slot.

The MPC controller framework consists in four main components:

  • Trajectory taken in consideration during optimization. This is parametrized by a number of time steps N spaced out by a time dt. Clearly, the number of variables optimized is directly proportional to N, so this must be considered in case there are computational constraints.

  • Vehicle Model, which is the set of equations that describes system behavior and updates across time steps. In our case, we used a simplified kinematic model (so called bycicle model) described by a state of six parameters:

    • x car position (x-axis)
    • y car position (y-axis)
    • psi car's heading direction
    • v car's velocity
    • cte cross-track error
    • epsi orientation error

    Vehicle model update equations are implemented at lines 117-123 in MPC.cpp.

  • Contraints necessary to model contrants in actuators' respose. For instance, a vehicle will never be able to steer 90 deegrees in a single time step. In this project we set these constraints as follows:

    • steering: bounded in range [-25°, 25°]
    • acceleration: bounded in range [-1, 1] from full brake to full throttle

  • Cost Function on whose optimization is based the whole control process. Usually cost function is made of the sum of different terms. Besides the main terms that depends on reference values (e.g. cross-track or heading error), other regularization terms are present to enforce the smoothness in the controller response (e.g. avoid abrupt steering).

    In this project the cost function is implemented at lines 54-79 in MPC.cpp.

Tuning Trajectory Parameters

Both N and dt are fundamental parameters in the optimization process. In particular, T = N * dt constitutes the prediction horizon considered during optimization. These values have to be tuned keeping in mind a couple of things:

  • large dt result in less frequent actuations, which in turn could result in the difficulty in following a continuous reference trajectory (so called discretization error)
  • despite the fact that having a large T could benefit the control process, consider that predicting too far in the future does not make sense in real-world scenarios.
  • large T and small dt lead to large N. As mentioned above, the number of variables optimized is directly proportional to N, so will lead to an higher computational cost.

In the current project I empirically set (by visually inspecting the vehicle's behavior in the simulator) these parameters to be N=10 and dt=0.1, for a total of T=1s in the future.

Changing Reference System

Simulator provides coordinates in global reference system. In order to ease later computation, these are converted into car's own reference system at lines 94-102 in main.cpp.

Dealing with Latency

To mimic real driving conditions where the car does actuate the commands instantly, a 100ms latency delay has been introduced before sending the data message to the simulator (line 185 in main.cpp). In order to deal with latency, state is predicted one time step ahead before feeding it to the solver (lines 125-132 in main.cpp).

Dependencies

  • cmake >= 3.5
  • All OSes: click here for installation instructions
  • make >= 4.1
  • gcc/g++ >= 5.4
  • uWebSockets
    • Run either install-mac.sh or install-ubuntu.sh.
    • If you install from source, checkout to commit e94b6e1, i.e. 
      git clone https://github.com/uWebSockets/uWebSockets 
cd uWebSockets
git checkout e94b6e1
      Some function signatures have changed in v0.14.x. See this PR for more details.
  • Fortran Compiler
    • Mac: brew install gcc (might not be required)
    • Linux: sudo apt-get install gfortran. Additionall you have also have to install gcc and g++, sudo apt-get install gcc g++. Look in this Dockerfile for more info.
  • Ipopt
    • Mac: brew install ipopt
    • Linux
      • You will need a version of Ipopt 3.12.1 or higher. The version available through apt-get is 3.11.x. If you can get that version to work great but if not there's a script install_ipopt.sh that will install Ipopt. You just need to download the source from the Ipopt releases page or the Github releases page.
      • Then call install_ipopt.sh with the source directory as the first argument, ex: bash install_ipopt.sh Ipopt-3.12.1.
    • Windows: TODO. If you can use the Linux subsystem and follow the Linux instructions.
  • CppAD
    • Mac: brew install cppad
    • Linux sudo apt-get install cppad or equivalent.
    • Windows: TODO. If you can use the Linux subsystem and follow the Linux instructions.
  • Eigen. This is already part of the repo so you shouldn't have to worry about it.
  • Simulator. You can download these from the releases tab.
  • Not a dependency but read the DATA.md for a description of the data sent back from the simulator.

Basic Build Instructions

  1. Clone this repo.
  2. Make a build directory: mkdir build && cd build
  3. Compile: cmake .. && make
  4. Run it: ./mpc.

Tips

  1. It's recommended to test the MPC on basic examples to see if your implementation behaves as desired. One possible example is the vehicle starting offset of a straight line (reference). If the MPC implementation is correct, after some number of timesteps (not too many) it should find and track the reference line.
  2. The lake_track_waypoints.csv file has the waypoints of the lake track. You could use this to fit polynomials and points and see of how well your model tracks curve. NOTE: This file might be not completely in sync with the simulator so your solution should NOT depend on it.
  3. For visualization this C++ matplotlib wrapper could be helpful.

Project Instructions and Rubric

Note: regardless of the changes you make, your project must be buildable using cmake and make!

More information is only accessible by people who are already enrolled in Term 2 of CarND. If you are enrolled, see the project page for instructions and the project rubric.