Releases: UtilitechAS/amsreader-firmware
Releases · UtilitechAS/amsreader-firmware
Release v1.2.3
- Fixed negative current when exporting power
Release v1.2.2
- Fixed MQTT topic for temperature in RAW mode. Was overwriting VCC.
- Removed voltage test in startup. Now only active when compiled with -D SELF_POWERED=1
Release v1.2.1
- Fixed ESP32 crashing when RemoteDebug was initialized before WiFi.
- Fixed ESP32 unformatted SPIFFS
- Added battery voltage reading for Lolin D32
- Apply ESP_VCC_CALIB_FACTOR for any board, not just ESP8266
Release v1.2.0
Added features:
- Selectable MQTT payload format, JSON or RAW.
- Firmware upload from Web UI.
- Remote debugging, configurable from Web UI and accessible via Telnet.
- mDNS support. Hostname is configurable in Web UI.
- Added DNS as configuration option when using static IP.
Bug fixes:
- Fixed nearly invisible LED blink when MQTT is disabled.
- Fixed uptime rollover problem at 49.7 days.
- Corrected unixtime values for timestamps.
API changes:
- JSON field "up" changed from milliseconds to seconds
- Kaifa accumulated values changed from Wh to kWh
Release v1.1.2
- Increased limit for when ArduinoJson uses scientific notation
Testing v1.2-rc1
Added features:
- Selectable MQTT payload format, JSON or RAW.
- Firmware upload from Web UI.
- Remote debugging, configurable from Web UI and accessible via Telnet.
- mDNS support. Hostname is configurable in Web UI.
- Added DNS as configuration option when using static IP.
Bug fixes:
- Fixed nearly invisible LED blink when MQTT is disabled.
- Fixed uptime rollover problem at 49.7 days.
- Corrected unixtime values for timestamps.
API changes:
- JSON field "up" changed from milliseconds to seconds
- Kaifa accumulated values changed from Wh to kWh
Release v1.1.1
- Fixed missing hourly data from Kamstrup meter (MQTT buffer size set to 512)
- Fixed unexpected behaviour when saving MQTT settings (Deleted web security)
- Fixed release number in UI
Release v1.1.0
- AP mode trigger removed from boot and added to runtime (Hold AP button for 5s at any time to trigger AP mode. Hold again for 5s to return to normal)
- Auto detecting meter type if not configured
- Added option to set fixed IP address
- Allow updating configuration without restarting
- Corrected Vcc calculation
- Added exported power to dashboard
- Added accumulative import/export to dashboard
- Added Vcc, temperature, uptime and WiFi status to dashboard
- Added Vcc and WiFi RSSI to MQTT JSON messages
- Added badges to header, showing status for ESP, HAN, WiFi and MQTT
- Only showing/sending temperature if sensor is found
- Various optimizations for BUS powered devices
Testing v1.1-rc1
- AP mode trigger removed from boot and added to runtime (Hold AP button for 5s at any time to trigger AP mode. Hold again for 5s to return to normal)
- Auto detecting meter type if not configured
- Added option to set fixed IP address
- Allow updating configuration without restarting
- Corrected Vcc calculation
- Added exported power to dashboard
- Added accumulative import/export to dashboard
- Added Vcc, temperature, uptime and WiFi status to dashboard
- Added Vcc and WiFi RSSI to MQTT JSON messages
- Added badges to header, showing status for ESP, HAN, WiFi and MQTT
- Only showing/sending temperature if sensor is found
- Various optimizations for BUS powered devices
Release v1.0.3
Same as v1.0.2, but with files for all boards