Preinstalled FortiusAnt image for SD-card

[decodeais]

I have build an self expanding Raspi Image FortiusAnt6v8.image.zip with FortiusAnt on the new "Bookworm" Raspbian.

It has been shrunk to 2.2GB.
I think it is a good solution for somebody with no programming experience.

On this way I build a one key hit installation script for Bookworm. You can find a little description here: Wayland branch: ](https://drive.google.com/file/d/194TR7OpOv9Jgxx4twaCNeuSfxG9rKRHb/view?usp=drive_link)
You can download the Script [here].(https://github.com/decodeais/FortiusANT/blob/Wayland/raspberry/FortiusAntInstall.sh)

Compatible Hardware

The image should lead to a functional system on the following Raspi versions:

Raspberry Pi: 3B, 3B+, 3A+, 4B, 400, 5, CM3, CM3+, CM4, CM4S, Zero2W
Currently tested on Zero2W and Raspi4B, and Linux Mint.

If you don't like it, see it as a suggestion.

[VUTSHYK]

Hello. Thank you for the script. It helped me set up FortiusANT on my RPI3. Unfortunately, I encountered issues when trying to use the image.

[decodeais]

What kind of issues?
If you want to start the program you have only to use the Linux Startmenue. It is configured for the Fortius-Trainer.

[WouterJD]

Welcome to the FortiusANT community @VUTSHYK !

---

I'm always curious to know who I communicate with, where FortiusANT is used and what configuration is used.
Please tell me what bundle did you buy, and what brake and what head unit do you use?
I would therefore appreciate that you introduce yourself; perhaps leave a comment under issue #14.
You could also consider to visit the sponsor page

---

I hope you will get the trainer working!

[Carlin75]

Hi! Bought a 3.5 LCD but when installing driver i end up with a white screen. Followed induktions both from https://github.com/goodtft/LCD-show.git and some other guys fix on the goodtft drivers. But i still end up with a white screen. Rpi is working but i have to connect it thru ssh. Any thoughts? As i understand bookworm isn't supported, but is there a fix? /Carl

[WouterJD]

Hei @Carlin75 great to read that you're experimenting with LCD's.
What I would suggest is to start with the basics to get the display working and then integrate into FortiusANT.

raspberry.py (module of FortiusAnt) has a built-in main() for test-purpose, and that might be a starter