descheduler
The descheduler evicts pods which may be bound to less desired nodes
descheduler [flags]
--bind-address ip The IP address on which to listen for the --secure-port port. The associated interface(s) must be reachable by the rest of the cluster, and by CLI/web clients. If blank or an unspecified address (0.0.0.0 or ::), all interfaces and IP address families will be used. (default 0.0.0.0)
--cert-dir string The directory where the TLS certs are located. If --tls-cert-file and --tls-private-key-file are provided, this flag will be ignored. (default "apiserver.local.config/certificates")
--client-connection-burst int32 Burst to use for interacting with kubernetes apiserver.
--client-connection-kubeconfig string File path to kube configuration for interacting with kubernetes apiserver.
--client-connection-qps float32 QPS to use for interacting with kubernetes apiserver.
--descheduling-interval duration Time interval between two consecutive descheduler executions. Setting this value instructs the descheduler to run in a continuous loop at the interval specified.
--disable-http2-serving If true, HTTP2 serving will be disabled [default=false]
--disable-metrics Disables metrics. The metrics are by default served through https://localhost:10258/metrics. Secure address, resp. port can be changed through --bind-address, resp. --secure-port flags.
--dry-run Execute descheduler in dry run mode.
--enable-http2 If http/2 should be enabled for the metrics and health check
-h, --help help for descheduler
--http2-max-streams-per-connection int The limit that the server gives to clients for the maximum number of streams in an HTTP/2 connection. Zero means to use golang's default.
--kubeconfig string File with kube configuration. Deprecated, use client-connection-kubeconfig instead.
--leader-elect Start a leader election client and gain leadership before executing the main loop. Enable this when running replicated components for high availability.
--leader-elect-lease-duration duration The duration that non-leader candidates will wait after observing a leadership renewal until attempting to acquire leadership of a led but unrenewed leader slot. This is effectively the maximum duration that a leader can be stopped before it is replaced by another candidate. This is only applicable if leader election is enabled. (default 2m17s)
--leader-elect-renew-deadline duration The interval between attempts by the acting master to renew a leadership slot before it stops leading. This must be less than the lease duration. This is only applicable if leader election is enabled. (default 1m47s)
--leader-elect-resource-lock string The type of resource object that is used for locking during leader election. Supported options are 'leases', 'endpointsleases' and 'configmapsleases'. (default "leases")
--leader-elect-resource-name string The name of resource object that is used for locking during leader election. (default "descheduler")
--leader-elect-resource-namespace string The namespace of resource object that is used for locking during leader election. (default "kube-system")
--leader-elect-retry-period duration The duration the clients should wait between attempting acquisition and renewal of a leadership. This is only applicable if leader election is enabled. (default 26s)
--log-flush-frequency duration Maximum number of seconds between log flushes (default 5s)
--log-json-info-buffer-size quantity [Alpha] In JSON format with split output streams, the info messages can be buffered for a while to increase performance. The default value of zero bytes disables buffering. The size can be specified as number of bytes (512), multiples of 1000 (1K), multiples of 1024 (2Ki), or powers of those (3M, 4G, 5Mi, 6Gi). Enable the LoggingAlphaOptions feature gate to use this.
--log-json-split-stream [Alpha] In JSON format, write error messages to stderr and info messages to stdout. The default is to write a single stream to stdout. Enable the LoggingAlphaOptions feature gate to use this.
--log-text-info-buffer-size quantity [Alpha] In text format with split output streams, the info messages can be buffered for a while to increase performance. The default value of zero bytes disables buffering. The size can be specified as number of bytes (512), multiples of 1000 (1K), multiples of 1024 (2Ki), or powers of those (3M, 4G, 5Mi, 6Gi). Enable the LoggingAlphaOptions feature gate to use this.
--log-text-split-stream [Alpha] In text format, write error messages to stderr and info messages to stdout. The default is to write a single stream to stdout. Enable the LoggingAlphaOptions feature gate to use this.
--logging-format string Sets the log format. Permitted formats: "json" (gated by LoggingBetaOptions), "text". (default "text")
--otel-collector-endpoint string Set this flag to the OpenTelemetry Collector Service Address
--otel-fallback-no-op-on-error Fallback to NoOp Tracer in case of error
--otel-sample-rate float Sample rate to collect the Traces (default 1)
--otel-service-name string OTEL Trace name to be used with the resources (default "descheduler")
--otel-trace-namespace string OTEL Trace namespace to be used with the resources
--otel-transport-ca-cert string Path of the CA Cert that can be used to generate the client Certificate for establishing secure connection to the OTEL in gRPC mode
--permit-address-sharing If true, SO_REUSEADDR will be used when binding the port. This allows binding to wildcard IPs like 0.0.0.0 and specific IPs in parallel, and it avoids waiting for the kernel to release sockets in TIME_WAIT state. [default=false]
--permit-port-sharing If true, SO_REUSEPORT will be used when binding the port, which allows more than one instance to bind on the same address and port. [default=false]
--policy-config-file string File with descheduler policy configuration.
--secure-port int The port on which to serve HTTPS with authentication and authorization. If 0, don't serve HTTPS at all. (default 10258)
--tls-cert-file string File containing the default x509 Certificate for HTTPS. (CA cert, if any, concatenated after server cert). If HTTPS serving is enabled, and --tls-cert-file and --tls-private-key-file are not provided, a self-signed certificate and key are generated for the public address and saved to the directory specified by --cert-dir.
--tls-cipher-suites strings Comma-separated list of cipher suites for the server. If omitted, the default Go cipher suites will be used.
Preferred values: TLS_AES_128_GCM_SHA256, TLS_AES_256_GCM_SHA384, TLS_CHACHA20_POLY1305_SHA256, TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA, TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256, TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA, TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384, TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305, TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256, TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA, TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256, TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA, TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384, TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305, TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256.
Insecure values: TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256, TLS_ECDHE_ECDSA_WITH_RC4_128_SHA, TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA, TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256, TLS_ECDHE_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_3DES_EDE_CBC_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_RSA_WITH_AES_128_CBC_SHA256, TLS_RSA_WITH_AES_128_GCM_SHA256, TLS_RSA_WITH_AES_256_CBC_SHA, TLS_RSA_WITH_AES_256_GCM_SHA384, TLS_RSA_WITH_RC4_128_SHA.
--tls-min-version string Minimum TLS version supported. Possible values: VersionTLS10, VersionTLS11, VersionTLS12, VersionTLS13
--tls-private-key-file string File containing the default x509 private key matching --tls-cert-file.
--tls-sni-cert-key namedCertKey A pair of x509 certificate and private key file paths, optionally suffixed with a list of domain patterns which are fully qualified domain names, possibly with prefixed wildcard segments. The domain patterns also allow IP addresses, but IPs should only be used if the apiserver has visibility to the IP address requested by a client. If no domain patterns are provided, the names of the certificate are extracted. Non-wildcard matches trump over wildcard matches, explicit domain patterns trump over extracted names. For multiple key/certificate pairs, use the --tls-sni-cert-key multiple times. Examples: "example.crt,example.key" or "foo.crt,foo.key:*.foo.com,foo.com". (default [])
-v, --v Level number for the log level verbosity
--vmodule pattern=N,... comma-separated list of pattern=N settings for file-filtered logging (only works for text log format)
- descheduler version - Version of descheduler