sedna.io_videoanalyticsjobs.yaml

---
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
  annotations:
    controller-gen.kubebuilder.io/version: v0.4.1
  creationTimestamp: null
  name: videoanalyticsjobs.sedna.io
spec:
  group: sedna.io
  names:
    kind: VideoAnalyticsJob
    listKind: VideoAnalyticsJobList
    plural: videoanalyticsjobs
    shortNames:
    - va
    singular: videoanalyticsjob
  scope: Namespaced
  versions:
  - name: v1alpha1
    schema:
      openAPIV3Schema:
        properties:
          apiVersion:
            description: 'APIVersion defines the versioned schema of this representation
              of an object. Servers should convert recognized schemas to the latest
              internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
            type: string
          kind:
            description: 'Kind is a string value representing the REST resource this
              object represents. Servers may infer this from the endpoint the client
              submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
            type: string
          metadata:
            type: object
          spec:
            description: VideoAnalyticsJobSpec is a description of a VideoAnalyticsJob
            properties:
              activeDeadlineSeconds:
                description: Specifies the duration in seconds relative to the startTime
                  that the job may be continuously active before the system tries
                  to terminate it; value must be positive integer. If a Job is suspended
                  (at creation or through an update), this timer will effectively
                  be stopped and reset when the Job is resumed again.
                format: int64
                type: integer
              backoffLimit:
                description: Specifies the number of retries before marking this job
                  failed. Defaults to 6
                format: int32
                type: integer
              completionMode:
                description: "CompletionMode specifies how Pod completions are tracked.
                  It can be `NonIndexed` (default) or `Indexed`. \n `NonIndexed` means
                  that the Job is considered complete when there have been .spec.completions
                  successfully completed Pods. Each Pod completion is homologous to
                  each other. \n `Indexed` means that the Pods of a Job get an associated
                  completion index from 0 to (.spec.completions - 1), available in
                  the annotation batch.kubernetes.io/job-completion-index. The Job
                  is considered complete when there is one successfully completed
                  Pod for each index. When value is `Indexed`, .spec.completions must
                  be specified and `.spec.parallelism` must be less than or equal
                  to 10^5. \n This field is alpha-level and is only honored by servers
                  that enable the IndexedJob feature gate. More completion modes can
                  be added in the future. If the Job controller observes a mode that
                  it doesn't recognize, the controller skips updates for the Job."
                type: string
              completions:
                description: 'Specifies the desired number of successfully finished
                  pods the job should be run with.  Setting to nil means that the
                  success of any pod signals the success of all pods, and allows parallelism
                  to have any positive value.  Setting to 1 means that parallelism
                  is limited to 1 and the success of that pod signals the success
                  of the job. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/'
                format: int32
                type: integer
              kafkaSupport:
                type: boolean
              manualSelector:
                description: 'manualSelector controls generation of pod labels and
                  pod selectors. Leave `manualSelector` unset unless you are certain
                  what you are doing. When false or unset, the system pick labels
                  unique to this job and appends those labels to the pod template.  When
                  true, the user is responsible for picking unique labels and specifying
                  the selector.  Failure to pick a unique label may cause this and
                  other jobs to not function correctly.  However, You may see `manualSelector=true`
                  in jobs that were created with the old `extensions/v1beta1` API.
                  More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/#specifying-your-own-pod-selector'
                type: boolean
              model:
                description: VideoAnalyticsModel describes the detection model
                properties:
                  name:
                    type: string
                required:
                - name
                type: object
              parallelism:
                description: 'Specifies the maximum desired number of pods the job
                  should run at any given time. The actual number of pods running
                  in steady state will be less than this number when ((.spec.completions
                  - .status.successful) < .spec.parallelism), i.e. when the work left
                  to do is less than max parallelism. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/'
                format: int32
                type: integer
              selector:
                description: 'A label query over pods that should match the pod count.
                  Normally, the system sets this field for you. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors'
                properties:
                  matchExpressions:
                    description: matchExpressions is a list of label selector requirements.
                      The requirements are ANDed.
                    items:
                      description: A label selector requirement is a selector that
                        contains values, a key, and an operator that relates the key
                        and values.
                      properties:
                        key:
                          description: key is the label key that the selector applies
                            to.
                          type: string
                        operator:
                          description: operator represents a key's relationship to
                            a set of values. Valid operators are In, NotIn, Exists
                            and DoesNotExist.
                          type: string
                        values:
                          description: values is an array of string values. If the
                            operator is In or NotIn, the values array must be non-empty.
                            If the operator is Exists or DoesNotExist, the values
                            array must be empty. This array is replaced during a strategic
                            merge patch.
                          items:
                            type: string
                          type: array
                      required:
                      - key
                      - operator
                      type: object
                    type: array
                  matchLabels:
                    additionalProperties:
                      type: string
                    description: matchLabels is a map of {key,value} pairs. A single
                      {key,value} in the matchLabels map is equivalent to an element
                      of matchExpressions, whose key field is "key", the operator
                      is "In", and the values array contains only "value". The requirements
                      are ANDed.
                    type: object
                type: object
              suspend:
                description: Suspend specifies whether the Job controller should create
                  Pods or not. If a Job is created with suspend set to true, no Pods
                  are created by the Job controller. If a Job is suspended after creation
                  (i.e. the flag goes from false to true), the Job controller will
                  delete all active Pods associated with this Job. Users must design
                  their workload to gracefully handle this. Suspending a Job will
                  reset the StartTime field of the Job, effectively resetting the
                  ActiveDeadlineSeconds timer too. This is an alpha field and requires
                  the SuspendJob feature gate to be enabled; otherwise this field
                  may not be set to true. Defaults to false.
                type: boolean
              template:
                description: 'Describes the pod that will be created when executing
                  a job. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/'
                properties:
                  metadata:
                    description: 'Standard object''s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata'
                    type: object
                  spec:
                    description: 'Specification of the desired behavior of the pod.
                      More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status'
                    properties:
                      activeDeadlineSeconds:
                        description: Optional duration in seconds the pod may be active
                          on the node relative to StartTime before the system will
                          actively try to mark it failed and kill associated containers.
                          Value must be a positive integer.
                        format: int64
                        type: integer
                      affinity:
                        description: If specified, the pod's scheduling constraints
                        properties:
                          nodeAffinity:
                            description: Describes node affinity scheduling rules
                              for the pod.
                            properties:
                              preferredDuringSchedulingIgnoredDuringExecution:
                                description: The scheduler will prefer to schedule
                                  pods to nodes that satisfy the affinity expressions
                                  specified by this field, but it may choose a node
                                  that violates one or more of the expressions. The
                                  node that is most preferred is the one with the
                                  greatest sum of weights, i.e. for each node that
                                  meets all of the scheduling requirements (resource
                                  request, requiredDuringScheduling affinity expressions,
                                  etc.), compute a sum by iterating through the elements
                                  of this field and adding "weight" to the sum if
                                  the node matches the corresponding matchExpressions;
                                  the node(s) with the highest sum are the most preferred.
                                items:
                                  description: An empty preferred scheduling term
                                    matches all objects with implicit weight 0 (i.e.
                                    it's a no-op). A null preferred scheduling term
                                    matches no objects (i.e. is also a no-op).
                                  properties:
                                    preference:
                                      description: A node selector term, associated
                                        with the corresponding weight.
                                      properties:
                                        matchExpressions:
                                          description: A list of node selector requirements
                                            by node's labels.
                                          items:
                                            description: A node selector requirement
                                              is a selector that contains values,
                                              a key, and an operator that relates
                                              the key and values.
                                            properties:
                                              key:
                                                description: The label key that the
                                                  selector applies to.
                                                type: string
                                              operator:
                                                description: Represents a key's relationship
                                                  to a set of values. Valid operators
                                                  are In, NotIn, Exists, DoesNotExist.
                                                  Gt, and Lt.
                                                type: string
                                              values:
                                                description: An array of string values.
                                                  If the operator is In or NotIn,
                                                  the values array must be non-empty.
                                                  If the operator is Exists or DoesNotExist,
                                                  the values array must be empty.
                                                  If the operator is Gt or Lt, the
                                                  values array must have a single
                                                  element, which will be interpreted
                                                  as an integer. This array is replaced
                                                  during a strategic merge patch.
                                                items:
                                                  type: string
                                                type: array
                                            required:
                                            - key
                                            - operator
                                            type: object
                                          type: array
                                        matchFields:
                                          description: A list of node selector requirements
                                            by node's fields.
                                          items:
                                            description: A node selector requirement
                                              is a selector that contains values,
                                              a key, and an operator that relates
                                              the key and values.
                                            properties:
                                              key:
                                                description: The label key that the
                                                  selector applies to.
                                                type: string
                                              operator:
                                                description: Represents a key's relationship
                                                  to a set of values. Valid operators
                                                  are In, NotIn, Exists, DoesNotExist.
                                                  Gt, and Lt.
                                                type: string
                                              values:
                                                description: An array of string values.
                                                  If the operator is In or NotIn,
                                                  the values array must be non-empty.
                                                  If the operator is Exists or DoesNotExist,
                                                  the values array must be empty.
                                                  If the operator is Gt or Lt, the
                                                  values array must have a single
                                                  element, which will be interpreted
                                                  as an integer. This array is replaced
                                                  during a strategic merge patch.
                                                items:
                                                  type: string
                                                type: array
                                            required:
                                            - key
                                            - operator
                                            type: object
                                          type: array
                                      type: object
                                    weight:
                                      description: Weight associated with matching
                                        the corresponding nodeSelectorTerm, in the
                                        range 1-100.
                                      format: int32
                                      type: integer
                                  required:
                                  - preference
                                  - weight
                                  type: object
                                type: array
                              requiredDuringSchedulingIgnoredDuringExecution:
                                description: If the affinity requirements specified
                                  by this field are not met at scheduling time, the
                                  pod will not be scheduled onto the node. If the
                                  affinity requirements specified by this field cease
                                  to be met at some point during pod execution (e.g.
                                  due to an update), the system may or may not try
                                  to eventually evict the pod from its node.
                                properties:
                                  nodeSelectorTerms:
                                    description: Required. A list of node selector
                                      terms. The terms are ORed.
                                    items:
                                      description: A null or empty node selector term
                                        matches no objects. The requirements of them
                                        are ANDed. The TopologySelectorTerm type implements
                                        a subset of the NodeSelectorTerm.
                                      properties:
                                        matchExpressions:
                                          description: A list of node selector requirements
                                            by node's labels.
                                          items:
                                            description: A node selector requirement
                                              is a selector that contains values,
                                              a key, and an operator that relates
                                              the key and values.
                                            properties:
                                              key:
                                                description: The label key that the
                                                  selector applies to.
                                                type: string
                                              operator:
                                                description: Represents a key's relationship
                                                  to a set of values. Valid operators
                                                  are In, NotIn, Exists, DoesNotExist.
                                                  Gt, and Lt.
                                                type: string
                                              values:
                                                description: An array of string values.
                                                  If the operator is In or NotIn,
                                                  the values array must be non-empty.
                                                  If the operator is Exists or DoesNotExist,
                                                  the values array must be empty.
                                                  If the operator is Gt or Lt, the
                                                  values array must have a single
                                                  element, which will be interpreted
                                                  as an integer. This array is replaced
                                                  during a strategic merge patch.
                                                items:
                                                  type: string
                                                type: array
                                            required:
                                            - key
                                            - operator
                                            type: object
                                          type: array
                                        matchFields:
                                          description: A list of node selector requirements
                                            by node's fields.
                                          items:
                                            description: A node selector requirement
                                              is a selector that contains values,
                                              a key, and an operator that relates
                                              the key and values.
                                            properties:
                                              key:
                                                description: The label key that the
                                                  selector applies to.
                                                type: string
                                              operator:
                                                description: Represents a key's relationship
                                                  to a set of values. Valid operators
                                                  are In, NotIn, Exists, DoesNotExist.
                                                  Gt, and Lt.
                                                type: string
                                              values:
                                                description: An array of string values.
                                                  If the operator is In or NotIn,
                                                  the values array must be non-empty.
                                                  If the operator is Exists or DoesNotExist,
                                                  the values array must be empty.
                                                  If the operator is Gt or Lt, the
                                                  values array must have a single
                                                  element, which will be interpreted
                                                  as an integer. This array is replaced
                                                  during a strategic merge patch.
                                                items:
                                                  type: string
                                                type: array
                                            required:
                                            - key
                                            - operator
                                            type: object
                                          type: array
                                      type: object
                                    type: array
                                required:
                                - nodeSelectorTerms
                                type: object
                            type: object
                          podAffinity:
                            description: Describes pod affinity scheduling rules (e.g.
                              co-locate this pod in the same node, zone, etc. as some
                              other pod(s)).
                            properties:
                              preferredDuringSchedulingIgnoredDuringExecution:
                                description: The scheduler will prefer to schedule
                                  pods to nodes that satisfy the affinity expressions
                                  specified by this field, but it may choose a node
                                  that violates one or more of the expressions. The
                                  node that is most preferred is the one with the
                                  greatest sum of weights, i.e. for each node that
                                  meets all of the scheduling requirements (resource
                                  request, requiredDuringScheduling affinity expressions,
                                  etc.), compute a sum by iterating through the elements
                                  of this field and adding "weight" to the sum if
                                  the node has pods which matches the corresponding
                                  podAffinityTerm; the node(s) with the highest sum
                                  are the most preferred.
                                items:
                                  description: The weights of all of the matched WeightedPodAffinityTerm
                                    fields are added per-node to find the most preferred
                                    node(s)
                                  properties:
                                    podAffinityTerm:
                                      description: Required. A pod affinity term,
                                        associated with the corresponding weight.
                                      properties:
                                        labelSelector:
                                          description: A label query over a set of
                                            resources, in this case pods.
                                          properties:
                                            matchExpressions:
                                              description: matchExpressions is a list
                                                of label selector requirements. The
                                                requirements are ANDed.
                                              items:
                                                description: A label selector requirement
                                                  is a selector that contains values,
                                                  a key, and an operator that relates
                                                  the key and values.
                                                properties:
                                                  key:
                                                    description: key is the label
                                                      key that the selector applies
                                                      to.
                                                    type: string
                                                  operator:
                                                    description: operator represents
                                                      a key's relationship to a set
                                                      of values. Valid operators are
                                                      In, NotIn, Exists and DoesNotExist.
                                                    type: string
                                                  values:
                                                    description: values is an array
                                                      of string values. If the operator
                                                      is In or NotIn, the values array
                                                      must be non-empty. If the operator
                                                      is Exists or DoesNotExist, the
                                                      values array must be empty.
                                                      This array is replaced during
                                                      a strategic merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                required:
                                                - key
                                                - operator
                                                type: object
                                              type: array
                                            matchLabels:
                                              additionalProperties:
                                                type: string
                                              description: matchLabels is a map of
                                                {key,value} pairs. A single {key,value}
                                                in the matchLabels map is equivalent
                                                to an element of matchExpressions,
                                                whose key field is "key", the operator
                                                is "In", and the values array contains
                                                only "value". The requirements are
                                                ANDed.
                                              type: object
                                          type: object
                                        namespaceSelector:
                                          description: A label query over the set
                                            of namespaces that the term applies to.
                                            The term is applied to the union of the
                                            namespaces selected by this field and
                                            the ones listed in the namespaces field.
                                            null selector and null or empty namespaces
                                            list means "this pod's namespace". An
                                            empty selector ({}) matches all namespaces.
                                            This field is alpha-level and is only
                                            honored when PodAffinityNamespaceSelector
                                            feature is enabled.
                                          properties:
                                            matchExpressions:
                                              description: matchExpressions is a list
                                                of label selector requirements. The
                                                requirements are ANDed.
                                              items:
                                                description: A label selector requirement
                                                  is a selector that contains values,
                                                  a key, and an operator that relates
                                                  the key and values.
                                                properties:
                                                  key:
                                                    description: key is the label
                                                      key that the selector applies
                                                      to.
                                                    type: string
                                                  operator:
                                                    description: operator represents
                                                      a key's relationship to a set
                                                      of values. Valid operators are
                                                      In, NotIn, Exists and DoesNotExist.
                                                    type: string
                                                  values:
                                                    description: values is an array
                                                      of string values. If the operator
                                                      is In or NotIn, the values array
                                                      must be non-empty. If the operator
                                                      is Exists or DoesNotExist, the
                                                      values array must be empty.
                                                      This array is replaced during
                                                      a strategic merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                required:
                                                - key
                                                - operator
                                                type: object
                                              type: array
                                            matchLabels:
                                              additionalProperties:
                                                type: string
                                              description: matchLabels is a map of
                                                {key,value} pairs. A single {key,value}
                                                in the matchLabels map is equivalent
                                                to an element of matchExpressions,
                                                whose key field is "key", the operator
                                                is "In", and the values array contains
                                                only "value". The requirements are
                                                ANDed.
                                              type: object
                                          type: object
                                        namespaces:
                                          description: namespaces specifies a static
                                            list of namespace names that the term
                                            applies to. The term is applied to the
                                            union of the namespaces listed in this
                                            field and the ones selected by namespaceSelector.
                                            null or empty namespaces list and null
                                            namespaceSelector means "this pod's namespace"
                                          items:
                                            type: string
                                          type: array
                                        topologyKey:
                                          description: This pod should be co-located
                                            (affinity) or not co-located (anti-affinity)
                                            with the pods matching the labelSelector
                                            in the specified namespaces, where co-located
                                            is defined as running on a node whose
                                            value of the label with key topologyKey
                                            matches that of any node on which any
                                            of the selected pods is running. Empty
                                            topologyKey is not allowed.
                                          type: string
                                      required:
                                      - topologyKey
                                      type: object
                                    weight:
                                      description: weight associated with matching
                                        the corresponding podAffinityTerm, in the
                                        range 1-100.
                                      format: int32
                                      type: integer
                                  required:
                                  - podAffinityTerm
                                  - weight
                                  type: object
                                type: array
                              requiredDuringSchedulingIgnoredDuringExecution:
                                description: If the affinity requirements specified
                                  by this field are not met at scheduling time, the
                                  pod will not be scheduled onto the node. If the
                                  affinity requirements specified by this field cease
                                  to be met at some point during pod execution (e.g.
                                  due to a pod label update), the system may or may
                                  not try to eventually evict the pod from its node.
                                  When there are multiple elements, the lists of nodes
                                  corresponding to each podAffinityTerm are intersected,
                                  i.e. all terms must be satisfied.
                                items:
                                  description: Defines a set of pods (namely those
                                    matching the labelSelector relative to the given
                                    namespace(s)) that this pod should be co-located
                                    (affinity) or not co-located (anti-affinity) with,
                                    where co-located is defined as running on a node
                                    whose value of the label with key <topologyKey>
                                    matches that of any node on which a pod of the
                                    set of pods is running
                                  properties:
                                    labelSelector:
                                      description: A label query over a set of resources,
                                        in this case pods.
                                      properties:
                                        matchExpressions:
                                          description: matchExpressions is a list
                                            of label selector requirements. The requirements
                                            are ANDed.
                                          items:
                                            description: A label selector requirement
                                              is a selector that contains values,
                                              a key, and an operator that relates
                                              the key and values.
                                            properties:
                                              key:
                                                description: key is the label key
                                                  that the selector applies to.
                                                type: string
                                              operator:
                                                description: operator represents a
                                                  key's relationship to a set of values.
                                                  Valid operators are In, NotIn, Exists
                                                  and DoesNotExist.
                                                type: string
                                              values:
                                                description: values is an array of
                                                  string values. If the operator is
                                                  In or NotIn, the values array must
                                                  be non-empty. If the operator is
                                                  Exists or DoesNotExist, the values
                                                  array must be empty. This array
                                                  is replaced during a strategic merge
                                                  patch.
                                                items:
                                                  type: string
                                                type: array
                                            required:
                                            - key
                                            - operator
                                            type: object
                                          type: array
                                        matchLabels:
                                          additionalProperties:
                                            type: string
                                          description: matchLabels is a map of {key,value}
                                            pairs. A single {key,value} in the matchLabels
                                            map is equivalent to an element of matchExpressions,
                                            whose key field is "key", the operator
                                            is "In", and the values array contains
                                            only "value". The requirements are ANDed.
                                          type: object
                                      type: object
                                    namespaceSelector:
                                      description: A label query over the set of namespaces
                                        that the term applies to. The term is applied
                                        to the union of the namespaces selected by
                                        this field and the ones listed in the namespaces
                                        field. null selector and null or empty namespaces
                                        list means "this pod's namespace". An empty
                                        selector ({}) matches all namespaces. This
                                        field is alpha-level and is only honored when
                                        PodAffinityNamespaceSelector feature is enabled.
                                      properties:
                                        matchExpressions:
                                          description: matchExpressions is a list
                                            of label selector requirements. The requirements
                                            are ANDed.
                                          items:
                                            description: A label selector requirement
                                              is a selector that contains values,
                                              a key, and an operator that relates
                                              the key and values.
                                            properties:
                                              key:
                                                description: key is the label key
                                                  that the selector applies to.
                                                type: string
                                              operator:
                                                description: operator represents a
                                                  key's relationship to a set of values.
                                                  Valid operators are In, NotIn, Exists
                                                  and DoesNotExist.
                                                type: string
                                              values:
                                                description: values is an array of
                                                  string values. If the operator is
                                                  In or NotIn, the values array must
                                                  be non-empty. If the operator is
                                                  Exists or DoesNotExist, the values
                                                  array must be empty. This array
                                                  is replaced during a strategic merge
                                                  patch.
                                                items:
                                                  type: string
                                                type: array
                                            required:
                                            - key
                                            - operator
                                            type: object
                                          type: array
                                        matchLabels:
                                          additionalProperties:
                                            type: string
                                          description: matchLabels is a map of {key,value}
                                            pairs. A single {key,value} in the matchLabels
                                            map is equivalent to an element of matchExpressions,
                                            whose key field is "key", the operator
                                            is "In", and the values array contains
                                            only "value". The requirements are ANDed.
                                          type: object
                                      type: object
                                    namespaces:
                                      description: namespaces specifies a static list
                                        of namespace names that the term applies to.
                                        The term is applied to the union of the namespaces
                                        listed in this field and the ones selected
                                        by namespaceSelector. null or empty namespaces
                                        list and null namespaceSelector means "this
                                        pod's namespace"
                                      items:
                                        type: string
                                      type: array
                                    topologyKey:
                                      description: This pod should be co-located (affinity)
                                        or not co-located (anti-affinity) with the
                                        pods matching the labelSelector in the specified
                                        namespaces, where co-located is defined as
                                        running on a node whose value of the label
                                        with key topologyKey matches that of any node
                                        on which any of the selected pods is running.
                                        Empty topologyKey is not allowed.
                                      type: string
                                  required:
                                  - topologyKey
                                  type: object
                                type: array
                            type: object
                          podAntiAffinity:
                            description: Describes pod anti-affinity scheduling rules
                              (e.g. avoid putting this pod in the same node, zone,
                              etc. as some other pod(s)).
                            properties:
                              preferredDuringSchedulingIgnoredDuringExecution:
                                description: The scheduler will prefer to schedule
                                  pods to nodes that satisfy the anti-affinity expressions
                                  specified by this field, but it may choose a node
                                  that violates one or more of the expressions. The
                                  node that is most preferred is the one with the
                                  greatest sum of weights, i.e. for each node that
                                  meets all of the scheduling requirements (resource
                                  request, requiredDuringScheduling anti-affinity
                                  expressions, etc.), compute a sum by iterating through
                                  the elements of this field and adding "weight" to
                                  the sum if the node has pods which matches the corresponding
                                  podAffinityTerm; the node(s) with the highest sum
                                  are the most preferred.
                                items:
                                  description: The weights of all of the matched WeightedPodAffinityTerm
                                    fields are added per-node to find the most preferred
                                    node(s)
                                  properties:
                                    podAffinityTerm:
                                      description: Required. A pod affinity term,
                                        associated with the corresponding weight.
                                      properties:
                                        labelSelector:
                                          description: A label query over a set of
                                            resources, in this case pods.
                                          properties:
                                            matchExpressions:
                                              description: matchExpressions is a list
                                                of label selector requirements. The
                                                requirements are ANDed.
                                              items:
                                                description: A label selector requirement
                                                  is a selector that contains values,
                                                  a key, and an operator that relates
                                                  the key and values.
                                                properties:
                                                  key:
                                                    description: key is the label
                                                      key that the selector applies
                                                      to.
                                                    type: string
                                                  operator:
                                                    description: operator represents
                                                      a key's relationship to a set
                                                      of values. Valid operators are
                                                      In, NotIn, Exists and DoesNotExist.
                                                    type: string
                                                  values:
                                                    description: values is an array
                                                      of string values. If the operator
                                                      is In or NotIn, the values array
                                                      must be non-empty. If the operator
                                                      is Exists or DoesNotExist, the
                                                      values array must be empty.
                                                      This array is replaced during
                                                      a strategic merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                required:
                                                - key
                                                - operator
                                                type: object
                                              type: array
                                            matchLabels:
                                              additionalProperties:
                                                type: string
                                              description: matchLabels is a map of
                                                {key,value} pairs. A single {key,value}
                                                in the matchLabels map is equivalent
                                                to an element of matchExpressions,
                                                whose key field is "key", the operator
                                                is "In", and the values array contains
                                                only "value". The requirements are
                                                ANDed.
                                              type: object
                                          type: object
                                        namespaceSelector:
                                          description: A label query over the set
                                            of namespaces that the term applies to.
                                            The term is applied to the union of the
                                            namespaces selected by this field and
                                            the ones listed in the namespaces field.
                                            null selector and null or empty namespaces
                                            list means "this pod's namespace". An
                                            empty selector ({}) matches all namespaces.
                                            This field is alpha-level and is only
                                            honored when PodAffinityNamespaceSelector
                                            feature is enabled.
                                          properties:
                                            matchExpressions:
                                              description: matchExpressions is a list
                                                of label selector requirements. The
                                                requirements are ANDed.
                                              items:
                                                description: A label selector requirement
                                                  is a selector that contains values,
                                                  a key, and an operator that relates
                                                  the key and values.
                                                properties:
                                                  key:
                                                    description: key is the label
                                                      key that the selector applies
                                                      to.
                                                    type: string
                                                  operator:
                                                    description: operator represents
                                                      a key's relationship to a set
                                                      of values. Valid operators are
                                                      In, NotIn, Exists and DoesNotExist.
                                                    type: string
                                                  values:
                                                    description: values is an array
                                                      of string values. If the operator
                                                      is In or NotIn, the values array
                                                      must be non-empty. If the operator
                                                      is Exists or DoesNotExist, the
                                                      values array must be empty.
                                                      This array is replaced during
                                                      a strategic merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                required:
                                                - key
                                                - operator
                                                type: object
                                              type: array
                                            matchLabels:
                                              additionalProperties:
                                                type: string
                                              description: matchLabels is a map of
                                                {key,value} pairs. A single {key,value}
                                                in the matchLabels map is equivalent
                                                to an element of matchExpressions,
                                                whose key field is "key", the operator
                                                is "In", and the values array contains
                                                only "value". The requirements are
                                                ANDed.
                                              type: object
                                          type: object
                                        namespaces:
                                          description: namespaces specifies a static
                                            list of namespace names that the term
                                            applies to. The term is applied to the
                                            union of the namespaces listed in this
                                            field and the ones selected by namespaceSelector.
                                            null or empty namespaces list and null
                                            namespaceSelector means "this pod's namespace"
                                          items:
                                            type: string
                                          type: array
                                        topologyKey:
                                          description: This pod should be co-located
                                            (affinity) or not co-located (anti-affinity)
                                            with the pods matching the labelSelector
                                            in the specified namespaces, where co-located
                                            is defined as running on a node whose
                                            value of the label with key topologyKey
                                            matches that of any node on which any
                                            of the selected pods is running. Empty
                                            topologyKey is not allowed.
                                          type: string
                                      required:
                                      - topologyKey
                                      type: object
                                    weight:
                                      description: weight associated with matching
                                        the corresponding podAffinityTerm, in the
                                        range 1-100.
                                      format: int32
                                      type: integer
                                  required:
                                  - podAffinityTerm
                                  - weight
                                  type: object
                                type: array
                              requiredDuringSchedulingIgnoredDuringExecution:
                                description: If the anti-affinity requirements specified
                                  by this field are not met at scheduling time, the
                                  pod will not be scheduled onto the node. If the
                                  anti-affinity requirements specified by this field
                                  cease to be met at some point during pod execution
                                  (e.g. due to a pod label update), the system may
                                  or may not try to eventually evict the pod from
                                  its node. When there are multiple elements, the
                                  lists of nodes corresponding to each podAffinityTerm
                                  are intersected, i.e. all terms must be satisfied.
                                items:
                                  description: Defines a set of pods (namely those
                                    matching the labelSelector relative to the given
                                    namespace(s)) that this pod should be co-located
                                    (affinity) or not co-located (anti-affinity) with,
                                    where co-located is defined as running on a node
                                    whose value of the label with key <topologyKey>
                                    matches that of any node on which a pod of the
                                    set of pods is running
                                  properties:
                                    labelSelector:
                                      description: A label query over a set of resources,
                                        in this case pods.
                                      properties:
                                        matchExpressions:
                                          description: matchExpressions is a list
                                            of label selector requirements. The requirements
                                            are ANDed.
                                          items:
                                            description: A label selector requirement
                                              is a selector that contains values,
                                              a key, and an operator that relates
                                              the key and values.
                                            properties:
                                              key:
                                                description: key is the label key
                                                  that the selector applies to.
                                                type: string
                                              operator:
                                                description: operator represents a
                                                  key's relationship to a set of values.
                                                  Valid operators are In, NotIn, Exists
                                                  and DoesNotExist.
                                                type: string
                                              values:
                                                description: values is an array of
                                                  string values. If the operator is
                                                  In or NotIn, the values array must
                                                  be non-empty. If the operator is
                                                  Exists or DoesNotExist, the values
                                                  array must be empty. This array
                                                  is replaced during a strategic merge
                                                  patch.
                                                items:
                                                  type: string
                                                type: array
                                            required:
                                            - key
                                            - operator
                                            type: object
                                          type: array
                                        matchLabels:
                                          additionalProperties:
                                            type: string
                                          description: matchLabels is a map of {key,value}
                                            pairs. A single {key,value} in the matchLabels
                                            map is equivalent to an element of matchExpressions,
                                            whose key field is "key", the operator
                                            is "In", and the values array contains
                                            only "value". The requirements are ANDed.
                                          type: object
                                      type: object
                                    namespaceSelector:
                                      description: A label query over the set of namespaces
                                        that the term applies to. The term is applied
                                        to the union of the namespaces selected by
                                        this field and the ones listed in the namespaces
                                        field. null selector and null or empty namespaces
                                        list means "this pod's namespace". An empty
                                        selector ({}) matches all namespaces. This
                                        field is alpha-level and is only honored when
                                        PodAffinityNamespaceSelector feature is enabled.
                                      properties:
                                        matchExpressions:
                                          description: matchExpressions is a list
                                            of label selector requirements. The requirements
                                            are ANDed.
                                          items:
                                            description: A label selector requirement
                                              is a selector that contains values,
                                              a key, and an operator that relates
                                              the key and values.
                                            properties:
                                              key:
                                                description: key is the label key
                                                  that the selector applies to.
                                                type: string
                                              operator:
                                                description: operator represents a
                                                  key's relationship to a set of values.
                                                  Valid operators are In, NotIn, Exists
                                                  and DoesNotExist.
                                                type: string
                                              values:
                                                description: values is an array of
                                                  string values. If the operator is
                                                  In or NotIn, the values array must
                                                  be non-empty. If the operator is
                                                  Exists or DoesNotExist, the values
                                                  array must be empty. This array
                                                  is replaced during a strategic merge
                                                  patch.
                                                items:
                                                  type: string
                                                type: array
                                            required:
                                            - key
                                            - operator
                                            type: object
                                          type: array
                                        matchLabels:
                                          additionalProperties:
                                            type: string
                                          description: matchLabels is a map of {key,value}
                                            pairs. A single {key,value} in the matchLabels
                                            map is equivalent to an element of matchExpressions,
                                            whose key field is "key", the operator
                                            is "In", and the values array contains
                                            only "value". The requirements are ANDed.
                                          type: object
                                      type: object
                                    namespaces:
                                      description: namespaces specifies a static list
                                        of namespace names that the term applies to.
                                        The term is applied to the union of the namespaces
                                        listed in this field and the ones selected
                                        by namespaceSelector. null or empty namespaces
                                        list and null namespaceSelector means "this
                                        pod's namespace"
                                      items:
                                        type: string
                                      type: array
                                    topologyKey:
                                      description: This pod should be co-located (affinity)
                                        or not co-located (anti-affinity) with the
                                        pods matching the labelSelector in the specified
                                        namespaces, where co-located is defined as
                                        running on a node whose value of the label
                                        with key topologyKey matches that of any node
                                        on which any of the selected pods is running.
                                        Empty topologyKey is not allowed.
                                      type: string
                                  required:
                                  - topologyKey
                                  type: object
                                type: array
                            type: object
                        type: object
                      automountServiceAccountToken:
                        description: AutomountServiceAccountToken indicates whether
                          a service account token should be automatically mounted.
                        type: boolean
                      containers:
                        description: List of containers belonging to the pod. Containers
                          cannot currently be added or removed. There must be at least
                          one container in a Pod. Cannot be updated.
                        items:
                          description: A single application container that you want
                            to run within a pod.
                          properties:
                            args:
                              description: 'Arguments to the entrypoint. The docker
                                image''s CMD is used if this is not provided. Variable
                                references $(VAR_NAME) are expanded using the container''s
                                environment. If a variable cannot be resolved, the
                                reference in the input string will be unchanged. The
                                $(VAR_NAME) syntax can be escaped with a double $$,
                                ie: $$(VAR_NAME). Escaped references will never be
                                expanded, regardless of whether the variable exists
                                or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell'
                              items:
                                type: string
                              type: array
                            command:
                              description: 'Entrypoint array. Not executed within
                                a shell. The docker image''s ENTRYPOINT is used if
                                this is not provided. Variable references $(VAR_NAME)
                                are expanded using the container''s environment. If
                                a variable cannot be resolved, the reference in the
                                input string will be unchanged. The $(VAR_NAME) syntax
                                can be escaped with a double $$, ie: $$(VAR_NAME).
                                Escaped references will never be expanded, regardless
                                of whether the variable exists or not. Cannot be updated.
                                More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell'
                              items:
                                type: string
                              type: array
                            env:
                              description: List of environment variables to set in
                                the container. Cannot be updated.
                              items:
                                description: EnvVar represents an environment variable
                                  present in a Container.
                                properties:
                                  name:
                                    description: Name of the environment variable.
                                      Must be a C_IDENTIFIER.
                                    type: string
                                  value:
                                    description: 'Variable references $(VAR_NAME)
                                      are expanded using the previous defined environment
                                      variables in the container and any service environment
                                      variables. If a variable cannot be resolved,
                                      the reference in the input string will be unchanged.
                                      The $(VAR_NAME) syntax can be escaped with a
                                      double $$, ie: $$(VAR_NAME). Escaped references
                                      will never be expanded, regardless of whether
                                      the variable exists or not. Defaults to "".'
                                    type: string
                                  valueFrom:
                                    description: Source for the environment variable's
                                      value. Cannot be used if value is not empty.
                                    properties:
                                      configMapKeyRef:
                                        description: Selects a key of a ConfigMap.
                                        properties:
                                          key:
                                            description: The key to select.
                                            type: string
                                          name:
                                            description: 'Name of the referent. More
                                              info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                              TODO: Add other useful fields. apiVersion,
                                              kind, uid?'
                                            type: string
                                          optional:
                                            description: Specify whether the ConfigMap
                                              or its key must be defined
                                            type: boolean
                                        required:
                                        - key
                                        type: object
                                      fieldRef:
                                        description: 'Selects a field of the pod:
                                          supports metadata.name, metadata.namespace,
                                          `metadata.labels[''<KEY>'']`, `metadata.annotations[''<KEY>'']`,
                                          spec.nodeName, spec.serviceAccountName,
                                          status.hostIP, status.podIP, status.podIPs.'
                                        properties:
                                          apiVersion:
                                            description: Version of the schema the
                                              FieldPath is written in terms of, defaults
                                              to "v1".
                                            type: string
                                          fieldPath:
                                            description: Path of the field to select
                                              in the specified API version.
                                            type: string
                                        required:
                                        - fieldPath
                                        type: object
                                      resourceFieldRef:
                                        description: 'Selects a resource of the container:
                                          only resources limits and requests (limits.cpu,
                                          limits.memory, limits.ephemeral-storage,
                                          requests.cpu, requests.memory and requests.ephemeral-storage)
                                          are currently supported.'
                                        properties:
                                          containerName:
                                            description: 'Container name: required
                                              for volumes, optional for env vars'
                                            type: string
                                          divisor:
                                            anyOf:
                                            - type: integer
                                            - type: string
                                            description: Specifies the output format
                                              of the exposed resources, defaults to
                                              "1"
                                            pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                            x-kubernetes-int-or-string: true
                                          resource:
                                            description: 'Required: resource to select'
                                            type: string
                                        required:
                                        - resource
                                        type: object
                                      secretKeyRef:
                                        description: Selects a key of a secret in
                                          the pod's namespace
                                        properties:
                                          key:
                                            description: The key of the secret to
                                              select from.  Must be a valid secret
                                              key.
                                            type: string
                                          name:
                                            description: 'Name of the referent. More
                                              info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                              TODO: Add other useful fields. apiVersion,
                                              kind, uid?'
                                            type: string
                                          optional:
                                            description: Specify whether the Secret
                                              or its key must be defined
                                            type: boolean
                                        required:
                                        - key
                                        type: object
                                    type: object
                                required:
                                - name
                                type: object
                              type: array
                            envFrom:
                              description: List of sources to populate environment
                                variables in the container. The keys defined within
                                a source must be a C_IDENTIFIER. All invalid keys
                                will be reported as an event when the container is
                                starting. When a key exists in multiple sources, the
                                value associated with the last source will take precedence.
                                Values defined by an Env with a duplicate key will
                                take precedence. Cannot be updated.
                              items:
                                description: EnvFromSource represents the source of
                                  a set of ConfigMaps
                                properties:
                                  configMapRef:
                                    description: The ConfigMap to select from
                                    properties:
                                      name:
                                        description: 'Name of the referent. More info:
                                          https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          TODO: Add other useful fields. apiVersion,
                                          kind, uid?'
                                        type: string
                                      optional:
                                        description: Specify whether the ConfigMap
                                          must be defined
                                        type: boolean
                                    type: object
                                  prefix:
                                    description: An optional identifier to prepend
                                      to each key in the ConfigMap. Must be a C_IDENTIFIER.
                                    type: string
                                  secretRef:
                                    description: The Secret to select from
                                    properties:
                                      name:
                                        description: 'Name of the referent. More info:
                                          https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          TODO: Add other useful fields. apiVersion,
                                          kind, uid?'
                                        type: string
                                      optional:
                                        description: Specify whether the Secret must
                                          be defined
                                        type: boolean
                                    type: object
                                type: object
                              type: array
                            image:
                              description: 'Docker image name. More info: https://kubernetes.io/docs/concepts/containers/images
                                This field is optional to allow higher level config
                                management to default or override container images
                                in workload controllers like Deployments and StatefulSets.'
                              type: string
                            imagePullPolicy:
                              description: 'Image pull policy. One of Always, Never,
                                IfNotPresent. Defaults to Always if :latest tag is
                                specified, or IfNotPresent otherwise. Cannot be updated.
                                More info: https://kubernetes.io/docs/concepts/containers/images#updating-images'
                              type: string
                            lifecycle:
                              description: Actions that the management system should
                                take in response to container lifecycle events. Cannot
                                be updated.
                              properties:
                                postStart:
                                  description: 'PostStart is called immediately after
                                    a container is created. If the handler fails,
                                    the container is terminated and restarted according
                                    to its restart policy. Other management of the
                                    container blocks until the hook completes. More
                                    info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks'
                                  properties:
                                    exec:
                                      description: One and only one of the following
                                        should be specified. Exec specifies the action
                                        to take.
                                      properties:
                                        command:
                                          description: Command is the command line
                                            to execute inside the container, the working
                                            directory for the command  is root ('/')
                                            in the container's filesystem. The command
                                            is simply exec'd, it is not run inside
                                            a shell, so traditional shell instructions
                                            ('|', etc) won't work. To use a shell,
                                            you need to explicitly call out to that
                                            shell. Exit status of 0 is treated as
                                            live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies the http request
                                        to perform.
                                      properties:
                                        host:
                                          description: Host name to connect to, defaults
                                            to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the
                                            request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom
                                              header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: The header field name
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                            - name
                                            - value
                                            type: object
                                          type: array
                                        path:
                                          description: Path to access on the HTTP
                                            server.
                                          type: string
                                        port:
                                          anyOf:
                                          - type: integer
                                          - type: string
                                          description: Name or number of the port
                                            to access on the container. Number must
                                            be in the range 1 to 65535. Name must
                                            be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: Scheme to use for connecting
                                            to the host. Defaults to HTTP.
                                          type: string
                                      required:
                                      - port
                                      type: object
                                    tcpSocket:
                                      description: 'TCPSocket specifies an action
                                        involving a TCP port. TCP hooks not yet supported
                                        TODO: implement a realistic TCP lifecycle
                                        hook'
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect
                                            to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                          - type: integer
                                          - type: string
                                          description: Number or name of the port
                                            to access on the container. Number must
                                            be in the range 1 to 65535. Name must
                                            be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                      - port
                                      type: object
                                  type: object
                                preStop:
                                  description: 'PreStop is called immediately before
                                    a container is terminated due to an API request
                                    or management event such as liveness/startup probe
                                    failure, preemption, resource contention, etc.
                                    The handler is not called if the container crashes
                                    or exits. The reason for termination is passed
                                    to the handler. The Pod''s termination grace period
                                    countdown begins before the PreStop hooked is
                                    executed. Regardless of the outcome of the handler,
                                    the container will eventually terminate within
                                    the Pod''s termination grace period. Other management
                                    of the container blocks until the hook completes
                                    or until the termination grace period is reached.
                                    More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks'
                                  properties:
                                    exec:
                                      description: One and only one of the following
                                        should be specified. Exec specifies the action
                                        to take.
                                      properties:
                                        command:
                                          description: Command is the command line
                                            to execute inside the container, the working
                                            directory for the command  is root ('/')
                                            in the container's filesystem. The command
                                            is simply exec'd, it is not run inside
                                            a shell, so traditional shell instructions
                                            ('|', etc) won't work. To use a shell,
                                            you need to explicitly call out to that
                                            shell. Exit status of 0 is treated as
                                            live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies the http request
                                        to perform.
                                      properties:
                                        host:
                                          description: Host name to connect to, defaults
                                            to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the
                                            request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom
                                              header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: The header field name
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                            - name
                                            - value
                                            type: object
                                          type: array
                                        path:
                                          description: Path to access on the HTTP
                                            server.
                                          type: string
                                        port:
                                          anyOf:
                                          - type: integer
                                          - type: string
                                          description: Name or number of the port
                                            to access on the container. Number must
                                            be in the range 1 to 65535. Name must
                                            be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: Scheme to use for connecting
                                            to the host. Defaults to HTTP.
                                          type: string
                                      required:
                                      - port
                                      type: object
                                    tcpSocket:
                                      description: 'TCPSocket specifies an action
                                        involving a TCP port. TCP hooks not yet supported
                                        TODO: implement a realistic TCP lifecycle
                                        hook'
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect
                                            to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                          - type: integer
                                          - type: string
                                          description: Number or name of the port
                                            to access on the container. Number must
                                            be in the range 1 to 65535. Name must
                                            be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                      - port
                                      type: object
                                  type: object
                              type: object
                            livenessProbe:
                              description: 'Periodic probe of container liveness.
                                Container will be restarted if the probe fails. Cannot
                                be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                              properties:
                                exec:
                                  description: One and only one of the following should
                                    be specified. Exec specifies the action to take.
                                  properties:
                                    command:
                                      description: Command is the command line to
                                        execute inside the container, the working
                                        directory for the command  is root ('/') in
                                        the container's filesystem. The command is
                                        simply exec'd, it is not run inside a shell,
                                        so traditional shell instructions ('|', etc)
                                        won't work. To use a shell, you need to explicitly
                                        call out to that shell. Exit status of 0 is
                                        treated as live/healthy and non-zero is unhealthy.
                                      items:
                                        type: string
                                      type: array
                                  type: object
                                failureThreshold:
                                  description: Minimum consecutive failures for the
                                    probe to be considered failed after having succeeded.
                                    Defaults to 3. Minimum value is 1.
                                  format: int32
                                  type: integer
                                httpGet:
                                  description: HTTPGet specifies the http request
                                    to perform.
                                  properties:
                                    host:
                                      description: Host name to connect to, defaults
                                        to the pod IP. You probably want to set "Host"
                                        in httpHeaders instead.
                                      type: string
                                    httpHeaders:
                                      description: Custom headers to set in the request.
                                        HTTP allows repeated headers.
                                      items:
                                        description: HTTPHeader describes a custom
                                          header to be used in HTTP probes
                                        properties:
                                          name:
                                            description: The header field name
                                            type: string
                                          value:
                                            description: The header field value
                                            type: string
                                        required:
                                        - name
                                        - value
                                        type: object
                                      type: array
                                    path:
                                      description: Path to access on the HTTP server.
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Name or number of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                    scheme:
                                      description: Scheme to use for connecting to
                                        the host. Defaults to HTTP.
                                      type: string
                                  required:
                                  - port
                                  type: object
                                initialDelaySeconds:
                                  description: 'Number of seconds after the container
                                    has started before liveness probes are initiated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                                periodSeconds:
                                  description: How often (in seconds) to perform the
                                    probe. Default to 10 seconds. Minimum value is
                                    1.
                                  format: int32
                                  type: integer
                                successThreshold:
                                  description: Minimum consecutive successes for the
                                    probe to be considered successful after having
                                    failed. Defaults to 1. Must be 1 for liveness
                                    and startup. Minimum value is 1.
                                  format: int32
                                  type: integer
                                tcpSocket:
                                  description: 'TCPSocket specifies an action involving
                                    a TCP port. TCP hooks not yet supported TODO:
                                    implement a realistic TCP lifecycle hook'
                                  properties:
                                    host:
                                      description: 'Optional: Host name to connect
                                        to, defaults to the pod IP.'
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Number or name of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                  required:
                                  - port
                                  type: object
                                terminationGracePeriodSeconds:
                                  description: Optional duration in seconds the pod
                                    needs to terminate gracefully upon probe failure.
                                    The grace period is the duration in seconds after
                                    the processes running in the pod are sent a termination
                                    signal and the time when the processes are forcibly
                                    halted with a kill signal. Set this value longer
                                    than the expected cleanup time for your process.
                                    If this value is nil, the pod's terminationGracePeriodSeconds
                                    will be used. Otherwise, this value overrides
                                    the value provided by the pod spec. Value must
                                    be non-negative integer. The value zero indicates
                                    stop immediately via the kill signal (no opportunity
                                    to shut down). This is an alpha field and requires
                                    enabling ProbeTerminationGracePeriod feature gate.
                                  format: int64
                                  type: integer
                                timeoutSeconds:
                                  description: 'Number of seconds after which the
                                    probe times out. Defaults to 1 second. Minimum
                                    value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                              type: object
                            name:
                              description: Name of the container specified as a DNS_LABEL.
                                Each container in a pod must have a unique name (DNS_LABEL).
                                Cannot be updated.
                              type: string
                            ports:
                              description: List of ports to expose from the container.
                                Exposing a port here gives the system additional information
                                about the network connections a container uses, but
                                is primarily informational. Not specifying a port
                                here DOES NOT prevent that port from being exposed.
                                Any port which is listening on the default "0.0.0.0"
                                address inside a container will be accessible from
                                the network. Cannot be updated.
                              items:
                                description: ContainerPort represents a network port
                                  in a single container.
                                properties:
                                  containerPort:
                                    description: Number of port to expose on the pod's
                                      IP address. This must be a valid port number,
                                      0 < x < 65536.
                                    format: int32
                                    type: integer
                                  hostIP:
                                    description: What host IP to bind the external
                                      port to.
                                    type: string
                                  hostPort:
                                    description: Number of port to expose on the host.
                                      If specified, this must be a valid port number,
                                      0 < x < 65536. If HostNetwork is specified,
                                      this must match ContainerPort. Most containers
                                      do not need this.
                                    format: int32
                                    type: integer
                                  name:
                                    description: If specified, this must be an IANA_SVC_NAME
                                      and unique within the pod. Each named port in
                                      a pod must have a unique name. Name for the
                                      port that can be referred to by services.
                                    type: string
                                  protocol:
                                    default: TCP
                                    description: Protocol for port. Must be UDP, TCP,
                                      or SCTP. Defaults to "TCP".
                                    type: string
                                required:
                                - containerPort
                                type: object
                              type: array
                              x-kubernetes-list-map-keys:
                              - containerPort
                              - protocol
                              x-kubernetes-list-type: map
                            readinessProbe:
                              description: 'Periodic probe of container service readiness.
                                Container will be removed from service endpoints if
                                the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                              properties:
                                exec:
                                  description: One and only one of the following should
                                    be specified. Exec specifies the action to take.
                                  properties:
                                    command:
                                      description: Command is the command line to
                                        execute inside the container, the working
                                        directory for the command  is root ('/') in
                                        the container's filesystem. The command is
                                        simply exec'd, it is not run inside a shell,
                                        so traditional shell instructions ('|', etc)
                                        won't work. To use a shell, you need to explicitly
                                        call out to that shell. Exit status of 0 is
                                        treated as live/healthy and non-zero is unhealthy.
                                      items:
                                        type: string
                                      type: array
                                  type: object
                                failureThreshold:
                                  description: Minimum consecutive failures for the
                                    probe to be considered failed after having succeeded.
                                    Defaults to 3. Minimum value is 1.
                                  format: int32
                                  type: integer
                                httpGet:
                                  description: HTTPGet specifies the http request
                                    to perform.
                                  properties:
                                    host:
                                      description: Host name to connect to, defaults
                                        to the pod IP. You probably want to set "Host"
                                        in httpHeaders instead.
                                      type: string
                                    httpHeaders:
                                      description: Custom headers to set in the request.
                                        HTTP allows repeated headers.
                                      items:
                                        description: HTTPHeader describes a custom
                                          header to be used in HTTP probes
                                        properties:
                                          name:
                                            description: The header field name
                                            type: string
                                          value:
                                            description: The header field value
                                            type: string
                                        required:
                                        - name
                                        - value
                                        type: object
                                      type: array
                                    path:
                                      description: Path to access on the HTTP server.
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Name or number of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                    scheme:
                                      description: Scheme to use for connecting to
                                        the host. Defaults to HTTP.
                                      type: string
                                  required:
                                  - port
                                  type: object
                                initialDelaySeconds:
                                  description: 'Number of seconds after the container
                                    has started before liveness probes are initiated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                                periodSeconds:
                                  description: How often (in seconds) to perform the
                                    probe. Default to 10 seconds. Minimum value is
                                    1.
                                  format: int32
                                  type: integer
                                successThreshold:
                                  description: Minimum consecutive successes for the
                                    probe to be considered successful after having
                                    failed. Defaults to 1. Must be 1 for liveness
                                    and startup. Minimum value is 1.
                                  format: int32
                                  type: integer
                                tcpSocket:
                                  description: 'TCPSocket specifies an action involving
                                    a TCP port. TCP hooks not yet supported TODO:
                                    implement a realistic TCP lifecycle hook'
                                  properties:
                                    host:
                                      description: 'Optional: Host name to connect
                                        to, defaults to the pod IP.'
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Number or name of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                  required:
                                  - port
                                  type: object
                                terminationGracePeriodSeconds:
                                  description: Optional duration in seconds the pod
                                    needs to terminate gracefully upon probe failure.
                                    The grace period is the duration in seconds after
                                    the processes running in the pod are sent a termination
                                    signal and the time when the processes are forcibly
                                    halted with a kill signal. Set this value longer
                                    than the expected cleanup time for your process.
                                    If this value is nil, the pod's terminationGracePeriodSeconds
                                    will be used. Otherwise, this value overrides
                                    the value provided by the pod spec. Value must
                                    be non-negative integer. The value zero indicates
                                    stop immediately via the kill signal (no opportunity
                                    to shut down). This is an alpha field and requires
                                    enabling ProbeTerminationGracePeriod feature gate.
                                  format: int64
                                  type: integer
                                timeoutSeconds:
                                  description: 'Number of seconds after which the
                                    probe times out. Defaults to 1 second. Minimum
                                    value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                              type: object
                            resources:
                              description: 'Compute Resources required by this container.
                                Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
                              properties:
                                limits:
                                  additionalProperties:
                                    anyOf:
                                    - type: integer
                                    - type: string
                                    pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                    x-kubernetes-int-or-string: true
                                  description: 'Limits describes the maximum amount
                                    of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
                                  type: object
                                requests:
                                  additionalProperties:
                                    anyOf:
                                    - type: integer
                                    - type: string
                                    pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                    x-kubernetes-int-or-string: true
                                  description: 'Requests describes the minimum amount
                                    of compute resources required. If Requests is
                                    omitted for a container, it defaults to Limits
                                    if that is explicitly specified, otherwise to
                                    an implementation-defined value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
                                  type: object
                              type: object
                            securityContext:
                              description: 'Security options the pod should run with.
                                More info: https://kubernetes.io/docs/concepts/policy/security-context/
                                More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/'
                              properties:
                                allowPrivilegeEscalation:
                                  description: 'AllowPrivilegeEscalation controls
                                    whether a process can gain more privileges than
                                    its parent process. This bool directly controls
                                    if the no_new_privs flag will be set on the container
                                    process. AllowPrivilegeEscalation is true always
                                    when the container is: 1) run as Privileged 2)
                                    has CAP_SYS_ADMIN'
                                  type: boolean
                                capabilities:
                                  description: The capabilities to add/drop when running
                                    containers. Defaults to the default set of capabilities
                                    granted by the container runtime.
                                  properties:
                                    add:
                                      description: Added capabilities
                                      items:
                                        description: Capability represent POSIX capabilities
                                          type
                                        type: string
                                      type: array
                                    drop:
                                      description: Removed capabilities
                                      items:
                                        description: Capability represent POSIX capabilities
                                          type
                                        type: string
                                      type: array
                                  type: object
                                privileged:
                                  description: Run container in privileged mode. Processes
                                    in privileged containers are essentially equivalent
                                    to root on the host. Defaults to false.
                                  type: boolean
                                procMount:
                                  description: procMount denotes the type of proc
                                    mount to use for the containers. The default is
                                    DefaultProcMount which uses the container runtime
                                    defaults for readonly paths and masked paths.
                                    This requires the ProcMountType feature flag to
                                    be enabled.
                                  type: string
                                readOnlyRootFilesystem:
                                  description: Whether this container has a read-only
                                    root filesystem. Default is false.
                                  type: boolean
                                runAsGroup:
                                  description: The GID to run the entrypoint of the
                                    container process. Uses runtime default if unset.
                                    May also be set in PodSecurityContext.  If set
                                    in both SecurityContext and PodSecurityContext,
                                    the value specified in SecurityContext takes precedence.
                                  format: int64
                                  type: integer
                                runAsNonRoot:
                                  description: Indicates that the container must run
                                    as a non-root user. If true, the Kubelet will
                                    validate the image at runtime to ensure that it
                                    does not run as UID 0 (root) and fail to start
                                    the container if it does. If unset or false, no
                                    such validation will be performed. May also be
                                    set in PodSecurityContext.  If set in both SecurityContext
                                    and PodSecurityContext, the value specified in
                                    SecurityContext takes precedence.
                                  type: boolean
                                runAsUser:
                                  description: The UID to run the entrypoint of the
                                    container process. Defaults to user specified
                                    in image metadata if unspecified. May also be
                                    set in PodSecurityContext.  If set in both SecurityContext
                                    and PodSecurityContext, the value specified in
                                    SecurityContext takes precedence.
                                  format: int64
                                  type: integer
                                seLinuxOptions:
                                  description: The SELinux context to be applied to
                                    the container. If unspecified, the container runtime
                                    will allocate a random SELinux context for each
                                    container.  May also be set in PodSecurityContext.  If
                                    set in both SecurityContext and PodSecurityContext,
                                    the value specified in SecurityContext takes precedence.
                                  properties:
                                    level:
                                      description: Level is SELinux level label that
                                        applies to the container.
                                      type: string
                                    role:
                                      description: Role is a SELinux role label that
                                        applies to the container.
                                      type: string
                                    type:
                                      description: Type is a SELinux type label that
                                        applies to the container.
                                      type: string
                                    user:
                                      description: User is a SELinux user label that
                                        applies to the container.
                                      type: string
                                  type: object
                                seccompProfile:
                                  description: The seccomp options to use by this
                                    container. If seccomp options are provided at
                                    both the pod & container level, the container
                                    options override the pod options.
                                  properties:
                                    localhostProfile:
                                      description: localhostProfile indicates a profile
                                        defined in a file on the node should be used.
                                        The profile must be preconfigured on the node
                                        to work. Must be a descending path, relative
                                        to the kubelet's configured seccomp profile
                                        location. Must only be set if type is "Localhost".
                                      type: string
                                    type:
                                      description: "type indicates which kind of seccomp
                                        profile will be applied. Valid options are:
                                        \n Localhost - a profile defined in a file
                                        on the node should be used. RuntimeDefault
                                        - the container runtime default profile should
                                        be used. Unconfined - no profile should be
                                        applied."
                                      type: string
                                  required:
                                  - type
                                  type: object
                                windowsOptions:
                                  description: The Windows specific settings applied
                                    to all containers. If unspecified, the options
                                    from the PodSecurityContext will be used. If set
                                    in both SecurityContext and PodSecurityContext,
                                    the value specified in SecurityContext takes precedence.
                                  properties:
                                    gmsaCredentialSpec:
                                      description: GMSACredentialSpec is where the
                                        GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa)
                                        inlines the contents of the GMSA credential
                                        spec named by the GMSACredentialSpecName field.
                                      type: string
                                    gmsaCredentialSpecName:
                                      description: GMSACredentialSpecName is the name
                                        of the GMSA credential spec to use.
                                      type: string
                                    runAsUserName:
                                      description: The UserName in Windows to run
                                        the entrypoint of the container process. Defaults
                                        to the user specified in image metadata if
                                        unspecified. May also be set in PodSecurityContext.
                                        If set in both SecurityContext and PodSecurityContext,
                                        the value specified in SecurityContext takes
                                        precedence.
                                      type: string
                                  type: object
                              type: object
                            startupProbe:
                              description: 'StartupProbe indicates that the Pod has
                                successfully initialized. If specified, no other probes
                                are executed until this completes successfully. If
                                this probe fails, the Pod will be restarted, just
                                as if the livenessProbe failed. This can be used to
                                provide different probe parameters at the beginning
                                of a Pod''s lifecycle, when it might take a long time
                                to load data or warm a cache, than during steady-state
                                operation. This cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                              properties:
                                exec:
                                  description: One and only one of the following should
                                    be specified. Exec specifies the action to take.
                                  properties:
                                    command:
                                      description: Command is the command line to
                                        execute inside the container, the working
                                        directory for the command  is root ('/') in
                                        the container's filesystem. The command is
                                        simply exec'd, it is not run inside a shell,
                                        so traditional shell instructions ('|', etc)
                                        won't work. To use a shell, you need to explicitly
                                        call out to that shell. Exit status of 0 is
                                        treated as live/healthy and non-zero is unhealthy.
                                      items:
                                        type: string
                                      type: array
                                  type: object
                                failureThreshold:
                                  description: Minimum consecutive failures for the
                                    probe to be considered failed after having succeeded.
                                    Defaults to 3. Minimum value is 1.
                                  format: int32
                                  type: integer
                                httpGet:
                                  description: HTTPGet specifies the http request
                                    to perform.
                                  properties:
                                    host:
                                      description: Host name to connect to, defaults
                                        to the pod IP. You probably want to set "Host"
                                        in httpHeaders instead.
                                      type: string
                                    httpHeaders:
                                      description: Custom headers to set in the request.
                                        HTTP allows repeated headers.
                                      items:
                                        description: HTTPHeader describes a custom
                                          header to be used in HTTP probes
                                        properties:
                                          name:
                                            description: The header field name
                                            type: string
                                          value:
                                            description: The header field value
                                            type: string
                                        required:
                                        - name
                                        - value
                                        type: object
                                      type: array
                                    path:
                                      description: Path to access on the HTTP server.
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Name or number of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                    scheme:
                                      description: Scheme to use for connecting to
                                        the host. Defaults to HTTP.
                                      type: string
                                  required:
                                  - port
                                  type: object
                                initialDelaySeconds:
                                  description: 'Number of seconds after the container
                                    has started before liveness probes are initiated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                                periodSeconds:
                                  description: How often (in seconds) to perform the
                                    probe. Default to 10 seconds. Minimum value is
                                    1.
                                  format: int32
                                  type: integer
                                successThreshold:
                                  description: Minimum consecutive successes for the
                                    probe to be considered successful after having
                                    failed. Defaults to 1. Must be 1 for liveness
                                    and startup. Minimum value is 1.
                                  format: int32
                                  type: integer
                                tcpSocket:
                                  description: 'TCPSocket specifies an action involving
                                    a TCP port. TCP hooks not yet supported TODO:
                                    implement a realistic TCP lifecycle hook'
                                  properties:
                                    host:
                                      description: 'Optional: Host name to connect
                                        to, defaults to the pod IP.'
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Number or name of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                  required:
                                  - port
                                  type: object
                                terminationGracePeriodSeconds:
                                  description: Optional duration in seconds the pod
                                    needs to terminate gracefully upon probe failure.
                                    The grace period is the duration in seconds after
                                    the processes running in the pod are sent a termination
                                    signal and the time when the processes are forcibly
                                    halted with a kill signal. Set this value longer
                                    than the expected cleanup time for your process.
                                    If this value is nil, the pod's terminationGracePeriodSeconds
                                    will be used. Otherwise, this value overrides
                                    the value provided by the pod spec. Value must
                                    be non-negative integer. The value zero indicates
                                    stop immediately via the kill signal (no opportunity
                                    to shut down). This is an alpha field and requires
                                    enabling ProbeTerminationGracePeriod feature gate.
                                  format: int64
                                  type: integer
                                timeoutSeconds:
                                  description: 'Number of seconds after which the
                                    probe times out. Defaults to 1 second. Minimum
                                    value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                              type: object
                            stdin:
                              description: Whether this container should allocate
                                a buffer for stdin in the container runtime. If this
                                is not set, reads from stdin in the container will
                                always result in EOF. Default is false.
                              type: boolean
                            stdinOnce:
                              description: Whether the container runtime should close
                                the stdin channel after it has been opened by a single
                                attach. When stdin is true the stdin stream will remain
                                open across multiple attach sessions. If stdinOnce
                                is set to true, stdin is opened on container start,
                                is empty until the first client attaches to stdin,
                                and then remains open and accepts data until the client
                                disconnects, at which time stdin is closed and remains
                                closed until the container is restarted. If this flag
                                is false, a container processes that reads from stdin
                                will never receive an EOF. Default is false
                              type: boolean
                            terminationMessagePath:
                              description: 'Optional: Path at which the file to which
                                the container''s termination message will be written
                                is mounted into the container''s filesystem. Message
                                written is intended to be brief final status, such
                                as an assertion failure message. Will be truncated
                                by the node if greater than 4096 bytes. The total
                                message length across all containers will be limited
                                to 12kb. Defaults to /dev/termination-log. Cannot
                                be updated.'
                              type: string
                            terminationMessagePolicy:
                              description: Indicate how the termination message should
                                be populated. File will use the contents of terminationMessagePath
                                to populate the container status message on both success
                                and failure. FallbackToLogsOnError will use the last
                                chunk of container log output if the termination message
                                file is empty and the container exited with an error.
                                The log output is limited to 2048 bytes or 80 lines,
                                whichever is smaller. Defaults to File. Cannot be
                                updated.
                              type: string
                            tty:
                              description: Whether this container should allocate
                                a TTY for itself, also requires 'stdin' to be true.
                                Default is false.
                              type: boolean
                            volumeDevices:
                              description: volumeDevices is the list of block devices
                                to be used by the container.
                              items:
                                description: volumeDevice describes a mapping of a
                                  raw block device within a container.
                                properties:
                                  devicePath:
                                    description: devicePath is the path inside of
                                      the container that the device will be mapped
                                      to.
                                    type: string
                                  name:
                                    description: name must match the name of a persistentVolumeClaim
                                      in the pod
                                    type: string
                                required:
                                - devicePath
                                - name
                                type: object
                              type: array
                            volumeMounts:
                              description: Pod volumes to mount into the container's
                                filesystem. Cannot be updated.
                              items:
                                description: VolumeMount describes a mounting of a
                                  Volume within a container.
                                properties:
                                  mountPath:
                                    description: Path within the container at which
                                      the volume should be mounted.  Must not contain
                                      ':'.
                                    type: string
                                  mountPropagation:
                                    description: mountPropagation determines how mounts
                                      are propagated from the host to container and
                                      the other way around. When not set, MountPropagationNone
                                      is used. This field is beta in 1.10.
                                    type: string
                                  name:
                                    description: This must match the Name of a Volume.
                                    type: string
                                  readOnly:
                                    description: Mounted read-only if true, read-write
                                      otherwise (false or unspecified). Defaults to
                                      false.
                                    type: boolean
                                  subPath:
                                    description: Path within the volume from which
                                      the container's volume should be mounted. Defaults
                                      to "" (volume's root).
                                    type: string
                                  subPathExpr:
                                    description: Expanded path within the volume from
                                      which the container's volume should be mounted.
                                      Behaves similarly to SubPath but environment
                                      variable references $(VAR_NAME) are expanded
                                      using the container's environment. Defaults
                                      to "" (volume's root). SubPathExpr and SubPath
                                      are mutually exclusive.
                                    type: string
                                required:
                                - mountPath
                                - name
                                type: object
                              type: array
                            workingDir:
                              description: Container's working directory. If not specified,
                                the container runtime's default will be used, which
                                might be configured in the container image. Cannot
                                be updated.
                              type: string
                          required:
                          - name
                          type: object
                        type: array
                      dnsConfig:
                        description: Specifies the DNS parameters of a pod. Parameters
                          specified here will be merged to the generated DNS configuration
                          based on DNSPolicy.
                        properties:
                          nameservers:
                            description: A list of DNS name server IP addresses. This
                              will be appended to the base nameservers generated from
                              DNSPolicy. Duplicated nameservers will be removed.
                            items:
                              type: string
                            type: array
                          options:
                            description: A list of DNS resolver options. This will
                              be merged with the base options generated from DNSPolicy.
                              Duplicated entries will be removed. Resolution options
                              given in Options will override those that appear in
                              the base DNSPolicy.
                            items:
                              description: PodDNSConfigOption defines DNS resolver
                                options of a pod.
                              properties:
                                name:
                                  description: Required.
                                  type: string
                                value:
                                  type: string
                              type: object
                            type: array
                          searches:
                            description: A list of DNS search domains for host-name
                              lookup. This will be appended to the base search paths
                              generated from DNSPolicy. Duplicated search paths will
                              be removed.
                            items:
                              type: string
                            type: array
                        type: object
                      dnsPolicy:
                        description: Set DNS policy for the pod. Defaults to "ClusterFirst".
                          Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst',
                          'Default' or 'None'. DNS parameters given in DNSConfig will
                          be merged with the policy selected with DNSPolicy. To have
                          DNS options set along with hostNetwork, you have to specify
                          DNS policy explicitly to 'ClusterFirstWithHostNet'.
                        type: string
                      enableServiceLinks:
                        description: 'EnableServiceLinks indicates whether information
                          about services should be injected into pod''s environment
                          variables, matching the syntax of Docker links. Optional:
                          Defaults to true.'
                        type: boolean
                      ephemeralContainers:
                        description: List of ephemeral containers run in this pod.
                          Ephemeral containers may be run in an existing pod to perform
                          user-initiated actions such as debugging. This list cannot
                          be specified when creating a pod, and it cannot be modified
                          by updating the pod spec. In order to add an ephemeral container
                          to an existing pod, use the pod's ephemeralcontainers subresource.
                          This field is alpha-level and is only honored by servers
                          that enable the EphemeralContainers feature.
                        items:
                          description: An EphemeralContainer is a container that may
                            be added temporarily to an existing pod for user-initiated
                            activities such as debugging. Ephemeral containers have
                            no resource or scheduling guarantees, and they will not
                            be restarted when they exit or when a pod is removed or
                            restarted. If an ephemeral container causes a pod to exceed
                            its resource allocation, the pod may be evicted. Ephemeral
                            containers may not be added by directly updating the pod
                            spec. They must be added via the pod's ephemeralcontainers
                            subresource, and they will appear in the pod spec once
                            added. This is an alpha feature enabled by the EphemeralContainers
                            feature flag.
                          properties:
                            args:
                              description: 'Arguments to the entrypoint. The docker
                                image''s CMD is used if this is not provided. Variable
                                references $(VAR_NAME) are expanded using the container''s
                                environment. If a variable cannot be resolved, the
                                reference in the input string will be unchanged. The
                                $(VAR_NAME) syntax can be escaped with a double $$,
                                ie: $$(VAR_NAME). Escaped references will never be
                                expanded, regardless of whether the variable exists
                                or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell'
                              items:
                                type: string
                              type: array
                            command:
                              description: 'Entrypoint array. Not executed within
                                a shell. The docker image''s ENTRYPOINT is used if
                                this is not provided. Variable references $(VAR_NAME)
                                are expanded using the container''s environment. If
                                a variable cannot be resolved, the reference in the
                                input string will be unchanged. The $(VAR_NAME) syntax
                                can be escaped with a double $$, ie: $$(VAR_NAME).
                                Escaped references will never be expanded, regardless
                                of whether the variable exists or not. Cannot be updated.
                                More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell'
                              items:
                                type: string
                              type: array
                            env:
                              description: List of environment variables to set in
                                the container. Cannot be updated.
                              items:
                                description: EnvVar represents an environment variable
                                  present in a Container.
                                properties:
                                  name:
                                    description: Name of the environment variable.
                                      Must be a C_IDENTIFIER.
                                    type: string
                                  value:
                                    description: 'Variable references $(VAR_NAME)
                                      are expanded using the previous defined environment
                                      variables in the container and any service environment
                                      variables. If a variable cannot be resolved,
                                      the reference in the input string will be unchanged.
                                      The $(VAR_NAME) syntax can be escaped with a
                                      double $$, ie: $$(VAR_NAME). Escaped references
                                      will never be expanded, regardless of whether
                                      the variable exists or not. Defaults to "".'
                                    type: string
                                  valueFrom:
                                    description: Source for the environment variable's
                                      value. Cannot be used if value is not empty.
                                    properties:
                                      configMapKeyRef:
                                        description: Selects a key of a ConfigMap.
                                        properties:
                                          key:
                                            description: The key to select.
                                            type: string
                                          name:
                                            description: 'Name of the referent. More
                                              info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                              TODO: Add other useful fields. apiVersion,
                                              kind, uid?'
                                            type: string
                                          optional:
                                            description: Specify whether the ConfigMap
                                              or its key must be defined
                                            type: boolean
                                        required:
                                        - key
                                        type: object
                                      fieldRef:
                                        description: 'Selects a field of the pod:
                                          supports metadata.name, metadata.namespace,
                                          `metadata.labels[''<KEY>'']`, `metadata.annotations[''<KEY>'']`,
                                          spec.nodeName, spec.serviceAccountName,
                                          status.hostIP, status.podIP, status.podIPs.'
                                        properties:
                                          apiVersion:
                                            description: Version of the schema the
                                              FieldPath is written in terms of, defaults
                                              to "v1".
                                            type: string
                                          fieldPath:
                                            description: Path of the field to select
                                              in the specified API version.
                                            type: string
                                        required:
                                        - fieldPath
                                        type: object
                                      resourceFieldRef:
                                        description: 'Selects a resource of the container:
                                          only resources limits and requests (limits.cpu,
                                          limits.memory, limits.ephemeral-storage,
                                          requests.cpu, requests.memory and requests.ephemeral-storage)
                                          are currently supported.'
                                        properties:
                                          containerName:
                                            description: 'Container name: required
                                              for volumes, optional for env vars'
                                            type: string
                                          divisor:
                                            anyOf:
                                            - type: integer
                                            - type: string
                                            description: Specifies the output format
                                              of the exposed resources, defaults to
                                              "1"
                                            pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                            x-kubernetes-int-or-string: true
                                          resource:
                                            description: 'Required: resource to select'
                                            type: string
                                        required:
                                        - resource
                                        type: object
                                      secretKeyRef:
                                        description: Selects a key of a secret in
                                          the pod's namespace
                                        properties:
                                          key:
                                            description: The key of the secret to
                                              select from.  Must be a valid secret
                                              key.
                                            type: string
                                          name:
                                            description: 'Name of the referent. More
                                              info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                              TODO: Add other useful fields. apiVersion,
                                              kind, uid?'
                                            type: string
                                          optional:
                                            description: Specify whether the Secret
                                              or its key must be defined
                                            type: boolean
                                        required:
                                        - key
                                        type: object
                                    type: object
                                required:
                                - name
                                type: object
                              type: array
                            envFrom:
                              description: List of sources to populate environment
                                variables in the container. The keys defined within
                                a source must be a C_IDENTIFIER. All invalid keys
                                will be reported as an event when the container is
                                starting. When a key exists in multiple sources, the
                                value associated with the last source will take precedence.
                                Values defined by an Env with a duplicate key will
                                take precedence. Cannot be updated.
                              items:
                                description: EnvFromSource represents the source of
                                  a set of ConfigMaps
                                properties:
                                  configMapRef:
                                    description: The ConfigMap to select from
                                    properties:
                                      name:
                                        description: 'Name of the referent. More info:
                                          https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          TODO: Add other useful fields. apiVersion,
                                          kind, uid?'
                                        type: string
                                      optional:
                                        description: Specify whether the ConfigMap
                                          must be defined
                                        type: boolean
                                    type: object
                                  prefix:
                                    description: An optional identifier to prepend
                                      to each key in the ConfigMap. Must be a C_IDENTIFIER.
                                    type: string
                                  secretRef:
                                    description: The Secret to select from
                                    properties:
                                      name:
                                        description: 'Name of the referent. More info:
                                          https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          TODO: Add other useful fields. apiVersion,
                                          kind, uid?'
                                        type: string
                                      optional:
                                        description: Specify whether the Secret must
                                          be defined
                                        type: boolean
                                    type: object
                                type: object
                              type: array
                            image:
                              description: 'Docker image name. More info: https://kubernetes.io/docs/concepts/containers/images'
                              type: string
                            imagePullPolicy:
                              description: 'Image pull policy. One of Always, Never,
                                IfNotPresent. Defaults to Always if :latest tag is
                                specified, or IfNotPresent otherwise. Cannot be updated.
                                More info: https://kubernetes.io/docs/concepts/containers/images#updating-images'
                              type: string
                            lifecycle:
                              description: Lifecycle is not allowed for ephemeral
                                containers.
                              properties:
                                postStart:
                                  description: 'PostStart is called immediately after
                                    a container is created. If the handler fails,
                                    the container is terminated and restarted according
                                    to its restart policy. Other management of the
                                    container blocks until the hook completes. More
                                    info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks'
                                  properties:
                                    exec:
                                      description: One and only one of the following
                                        should be specified. Exec specifies the action
                                        to take.
                                      properties:
                                        command:
                                          description: Command is the command line
                                            to execute inside the container, the working
                                            directory for the command  is root ('/')
                                            in the container's filesystem. The command
                                            is simply exec'd, it is not run inside
                                            a shell, so traditional shell instructions
                                            ('|', etc) won't work. To use a shell,
                                            you need to explicitly call out to that
                                            shell. Exit status of 0 is treated as
                                            live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies the http request
                                        to perform.
                                      properties:
                                        host:
                                          description: Host name to connect to, defaults
                                            to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the
                                            request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom
                                              header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: The header field name
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                            - name
                                            - value
                                            type: object
                                          type: array
                                        path:
                                          description: Path to access on the HTTP
                                            server.
                                          type: string
                                        port:
                                          anyOf:
                                          - type: integer
                                          - type: string
                                          description: Name or number of the port
                                            to access on the container. Number must
                                            be in the range 1 to 65535. Name must
                                            be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: Scheme to use for connecting
                                            to the host. Defaults to HTTP.
                                          type: string
                                      required:
                                      - port
                                      type: object
                                    tcpSocket:
                                      description: 'TCPSocket specifies an action
                                        involving a TCP port. TCP hooks not yet supported
                                        TODO: implement a realistic TCP lifecycle
                                        hook'
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect
                                            to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                          - type: integer
                                          - type: string
                                          description: Number or name of the port
                                            to access on the container. Number must
                                            be in the range 1 to 65535. Name must
                                            be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                      - port
                                      type: object
                                  type: object
                                preStop:
                                  description: 'PreStop is called immediately before
                                    a container is terminated due to an API request
                                    or management event such as liveness/startup probe
                                    failure, preemption, resource contention, etc.
                                    The handler is not called if the container crashes
                                    or exits. The reason for termination is passed
                                    to the handler. The Pod''s termination grace period
                                    countdown begins before the PreStop hooked is
                                    executed. Regardless of the outcome of the handler,
                                    the container will eventually terminate within
                                    the Pod''s termination grace period. Other management
                                    of the container blocks until the hook completes
                                    or until the termination grace period is reached.
                                    More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks'
                                  properties:
                                    exec:
                                      description: One and only one of the following
                                        should be specified. Exec specifies the action
                                        to take.
                                      properties:
                                        command:
                                          description: Command is the command line
                                            to execute inside the container, the working
                                            directory for the command  is root ('/')
                                            in the container's filesystem. The command
                                            is simply exec'd, it is not run inside
                                            a shell, so traditional shell instructions
                                            ('|', etc) won't work. To use a shell,
                                            you need to explicitly call out to that
                                            shell. Exit status of 0 is treated as
                                            live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies the http request
                                        to perform.
                                      properties:
                                        host:
                                          description: Host name to connect to, defaults
                                            to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the
                                            request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom
                                              header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: The header field name
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                            - name
                                            - value
                                            type: object
                                          type: array
                                        path:
                                          description: Path to access on the HTTP
                                            server.
                                          type: string
                                        port:
                                          anyOf:
                                          - type: integer
                                          - type: string
                                          description: Name or number of the port
                                            to access on the container. Number must
                                            be in the range 1 to 65535. Name must
                                            be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: Scheme to use for connecting
                                            to the host. Defaults to HTTP.
                                          type: string
                                      required:
                                      - port
                                      type: object
                                    tcpSocket:
                                      description: 'TCPSocket specifies an action
                                        involving a TCP port. TCP hooks not yet supported
                                        TODO: implement a realistic TCP lifecycle
                                        hook'
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect
                                            to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                          - type: integer
                                          - type: string
                                          description: Number or name of the port
                                            to access on the container. Number must
                                            be in the range 1 to 65535. Name must
                                            be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                      - port
                                      type: object
                                  type: object
                              type: object
                            livenessProbe:
                              description: Probes are not allowed for ephemeral containers.
                              properties:
                                exec:
                                  description: One and only one of the following should
                                    be specified. Exec specifies the action to take.
                                  properties:
                                    command:
                                      description: Command is the command line to
                                        execute inside the container, the working
                                        directory for the command  is root ('/') in
                                        the container's filesystem. The command is
                                        simply exec'd, it is not run inside a shell,
                                        so traditional shell instructions ('|', etc)
                                        won't work. To use a shell, you need to explicitly
                                        call out to that shell. Exit status of 0 is
                                        treated as live/healthy and non-zero is unhealthy.
                                      items:
                                        type: string
                                      type: array
                                  type: object
                                failureThreshold:
                                  description: Minimum consecutive failures for the
                                    probe to be considered failed after having succeeded.
                                    Defaults to 3. Minimum value is 1.
                                  format: int32
                                  type: integer
                                httpGet:
                                  description: HTTPGet specifies the http request
                                    to perform.
                                  properties:
                                    host:
                                      description: Host name to connect to, defaults
                                        to the pod IP. You probably want to set "Host"
                                        in httpHeaders instead.
                                      type: string
                                    httpHeaders:
                                      description: Custom headers to set in the request.
                                        HTTP allows repeated headers.
                                      items:
                                        description: HTTPHeader describes a custom
                                          header to be used in HTTP probes
                                        properties:
                                          name:
                                            description: The header field name
                                            type: string
                                          value:
                                            description: The header field value
                                            type: string
                                        required:
                                        - name
                                        - value
                                        type: object
                                      type: array
                                    path:
                                      description: Path to access on the HTTP server.
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Name or number of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                    scheme:
                                      description: Scheme to use for connecting to
                                        the host. Defaults to HTTP.
                                      type: string
                                  required:
                                  - port
                                  type: object
                                initialDelaySeconds:
                                  description: 'Number of seconds after the container
                                    has started before liveness probes are initiated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                                periodSeconds:
                                  description: How often (in seconds) to perform the
                                    probe. Default to 10 seconds. Minimum value is
                                    1.
                                  format: int32
                                  type: integer
                                successThreshold:
                                  description: Minimum consecutive successes for the
                                    probe to be considered successful after having
                                    failed. Defaults to 1. Must be 1 for liveness
                                    and startup. Minimum value is 1.
                                  format: int32
                                  type: integer
                                tcpSocket:
                                  description: 'TCPSocket specifies an action involving
                                    a TCP port. TCP hooks not yet supported TODO:
                                    implement a realistic TCP lifecycle hook'
                                  properties:
                                    host:
                                      description: 'Optional: Host name to connect
                                        to, defaults to the pod IP.'
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Number or name of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                  required:
                                  - port
                                  type: object
                                terminationGracePeriodSeconds:
                                  description: Optional duration in seconds the pod
                                    needs to terminate gracefully upon probe failure.
                                    The grace period is the duration in seconds after
                                    the processes running in the pod are sent a termination
                                    signal and the time when the processes are forcibly
                                    halted with a kill signal. Set this value longer
                                    than the expected cleanup time for your process.
                                    If this value is nil, the pod's terminationGracePeriodSeconds
                                    will be used. Otherwise, this value overrides
                                    the value provided by the pod spec. Value must
                                    be non-negative integer. The value zero indicates
                                    stop immediately via the kill signal (no opportunity
                                    to shut down). This is an alpha field and requires
                                    enabling ProbeTerminationGracePeriod feature gate.
                                  format: int64
                                  type: integer
                                timeoutSeconds:
                                  description: 'Number of seconds after which the
                                    probe times out. Defaults to 1 second. Minimum
                                    value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                              type: object
                            name:
                              description: Name of the ephemeral container specified
                                as a DNS_LABEL. This name must be unique among all
                                containers, init containers and ephemeral containers.
                              type: string
                            ports:
                              description: Ports are not allowed for ephemeral containers.
                              items:
                                description: ContainerPort represents a network port
                                  in a single container.
                                properties:
                                  containerPort:
                                    description: Number of port to expose on the pod's
                                      IP address. This must be a valid port number,
                                      0 < x < 65536.
                                    format: int32
                                    type: integer
                                  hostIP:
                                    description: What host IP to bind the external
                                      port to.
                                    type: string
                                  hostPort:
                                    description: Number of port to expose on the host.
                                      If specified, this must be a valid port number,
                                      0 < x < 65536. If HostNetwork is specified,
                                      this must match ContainerPort. Most containers
                                      do not need this.
                                    format: int32
                                    type: integer
                                  name:
                                    description: If specified, this must be an IANA_SVC_NAME
                                      and unique within the pod. Each named port in
                                      a pod must have a unique name. Name for the
                                      port that can be referred to by services.
                                    type: string
                                  protocol:
                                    default: TCP
                                    description: Protocol for port. Must be UDP, TCP,
                                      or SCTP. Defaults to "TCP".
                                    type: string
                                required:
                                - containerPort
                                type: object
                              type: array
                            readinessProbe:
                              description: Probes are not allowed for ephemeral containers.
                              properties:
                                exec:
                                  description: One and only one of the following should
                                    be specified. Exec specifies the action to take.
                                  properties:
                                    command:
                                      description: Command is the command line to
                                        execute inside the container, the working
                                        directory for the command  is root ('/') in
                                        the container's filesystem. The command is
                                        simply exec'd, it is not run inside a shell,
                                        so traditional shell instructions ('|', etc)
                                        won't work. To use a shell, you need to explicitly
                                        call out to that shell. Exit status of 0 is
                                        treated as live/healthy and non-zero is unhealthy.
                                      items:
                                        type: string
                                      type: array
                                  type: object
                                failureThreshold:
                                  description: Minimum consecutive failures for the
                                    probe to be considered failed after having succeeded.
                                    Defaults to 3. Minimum value is 1.
                                  format: int32
                                  type: integer
                                httpGet:
                                  description: HTTPGet specifies the http request
                                    to perform.
                                  properties:
                                    host:
                                      description: Host name to connect to, defaults
                                        to the pod IP. You probably want to set "Host"
                                        in httpHeaders instead.
                                      type: string
                                    httpHeaders:
                                      description: Custom headers to set in the request.
                                        HTTP allows repeated headers.
                                      items:
                                        description: HTTPHeader describes a custom
                                          header to be used in HTTP probes
                                        properties:
                                          name:
                                            description: The header field name
                                            type: string
                                          value:
                                            description: The header field value
                                            type: string
                                        required:
                                        - name
                                        - value
                                        type: object
                                      type: array
                                    path:
                                      description: Path to access on the HTTP server.
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Name or number of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                    scheme:
                                      description: Scheme to use for connecting to
                                        the host. Defaults to HTTP.
                                      type: string
                                  required:
                                  - port
                                  type: object
                                initialDelaySeconds:
                                  description: 'Number of seconds after the container
                                    has started before liveness probes are initiated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                                periodSeconds:
                                  description: How often (in seconds) to perform the
                                    probe. Default to 10 seconds. Minimum value is
                                    1.
                                  format: int32
                                  type: integer
                                successThreshold:
                                  description: Minimum consecutive successes for the
                                    probe to be considered successful after having
                                    failed. Defaults to 1. Must be 1 for liveness
                                    and startup. Minimum value is 1.
                                  format: int32
                                  type: integer
                                tcpSocket:
                                  description: 'TCPSocket specifies an action involving
                                    a TCP port. TCP hooks not yet supported TODO:
                                    implement a realistic TCP lifecycle hook'
                                  properties:
                                    host:
                                      description: 'Optional: Host name to connect
                                        to, defaults to the pod IP.'
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Number or name of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                  required:
                                  - port
                                  type: object
                                terminationGracePeriodSeconds:
                                  description: Optional duration in seconds the pod
                                    needs to terminate gracefully upon probe failure.
                                    The grace period is the duration in seconds after
                                    the processes running in the pod are sent a termination
                                    signal and the time when the processes are forcibly
                                    halted with a kill signal. Set this value longer
                                    than the expected cleanup time for your process.
                                    If this value is nil, the pod's terminationGracePeriodSeconds
                                    will be used. Otherwise, this value overrides
                                    the value provided by the pod spec. Value must
                                    be non-negative integer. The value zero indicates
                                    stop immediately via the kill signal (no opportunity
                                    to shut down). This is an alpha field and requires
                                    enabling ProbeTerminationGracePeriod feature gate.
                                  format: int64
                                  type: integer
                                timeoutSeconds:
                                  description: 'Number of seconds after which the
                                    probe times out. Defaults to 1 second. Minimum
                                    value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                              type: object
                            resources:
                              description: Resources are not allowed for ephemeral
                                containers. Ephemeral containers use spare resources
                                already allocated to the pod.
                              properties:
                                limits:
                                  additionalProperties:
                                    anyOf:
                                    - type: integer
                                    - type: string
                                    pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                    x-kubernetes-int-or-string: true
                                  description: 'Limits describes the maximum amount
                                    of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
                                  type: object
                                requests:
                                  additionalProperties:
                                    anyOf:
                                    - type: integer
                                    - type: string
                                    pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                    x-kubernetes-int-or-string: true
                                  description: 'Requests describes the minimum amount
                                    of compute resources required. If Requests is
                                    omitted for a container, it defaults to Limits
                                    if that is explicitly specified, otherwise to
                                    an implementation-defined value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
                                  type: object
                              type: object
                            securityContext:
                              description: SecurityContext is not allowed for ephemeral
                                containers.
                              properties:
                                allowPrivilegeEscalation:
                                  description: 'AllowPrivilegeEscalation controls
                                    whether a process can gain more privileges than
                                    its parent process. This bool directly controls
                                    if the no_new_privs flag will be set on the container
                                    process. AllowPrivilegeEscalation is true always
                                    when the container is: 1) run as Privileged 2)
                                    has CAP_SYS_ADMIN'
                                  type: boolean
                                capabilities:
                                  description: The capabilities to add/drop when running
                                    containers. Defaults to the default set of capabilities
                                    granted by the container runtime.
                                  properties:
                                    add:
                                      description: Added capabilities
                                      items:
                                        description: Capability represent POSIX capabilities
                                          type
                                        type: string
                                      type: array
                                    drop:
                                      description: Removed capabilities
                                      items:
                                        description: Capability represent POSIX capabilities
                                          type
                                        type: string
                                      type: array
                                  type: object
                                privileged:
                                  description: Run container in privileged mode. Processes
                                    in privileged containers are essentially equivalent
                                    to root on the host. Defaults to false.
                                  type: boolean
                                procMount:
                                  description: procMount denotes the type of proc
                                    mount to use for the containers. The default is
                                    DefaultProcMount which uses the container runtime
                                    defaults for readonly paths and masked paths.
                                    This requires the ProcMountType feature flag to
                                    be enabled.
                                  type: string
                                readOnlyRootFilesystem:
                                  description: Whether this container has a read-only
                                    root filesystem. Default is false.
                                  type: boolean
                                runAsGroup:
                                  description: The GID to run the entrypoint of the
                                    container process. Uses runtime default if unset.
                                    May also be set in PodSecurityContext.  If set
                                    in both SecurityContext and PodSecurityContext,
                                    the value specified in SecurityContext takes precedence.
                                  format: int64
                                  type: integer
                                runAsNonRoot:
                                  description: Indicates that the container must run
                                    as a non-root user. If true, the Kubelet will
                                    validate the image at runtime to ensure that it
                                    does not run as UID 0 (root) and fail to start
                                    the container if it does. If unset or false, no
                                    such validation will be performed. May also be
                                    set in PodSecurityContext.  If set in both SecurityContext
                                    and PodSecurityContext, the value specified in
                                    SecurityContext takes precedence.
                                  type: boolean
                                runAsUser:
                                  description: The UID to run the entrypoint of the
                                    container process. Defaults to user specified
                                    in image metadata if unspecified. May also be
                                    set in PodSecurityContext.  If set in both SecurityContext
                                    and PodSecurityContext, the value specified in
                                    SecurityContext takes precedence.
                                  format: int64
                                  type: integer
                                seLinuxOptions:
                                  description: The SELinux context to be applied to
                                    the container. If unspecified, the container runtime
                                    will allocate a random SELinux context for each
                                    container.  May also be set in PodSecurityContext.  If
                                    set in both SecurityContext and PodSecurityContext,
                                    the value specified in SecurityContext takes precedence.
                                  properties:
                                    level:
                                      description: Level is SELinux level label that
                                        applies to the container.
                                      type: string
                                    role:
                                      description: Role is a SELinux role label that
                                        applies to the container.
                                      type: string
                                    type:
                                      description: Type is a SELinux type label that
                                        applies to the container.
                                      type: string
                                    user:
                                      description: User is a SELinux user label that
                                        applies to the container.
                                      type: string
                                  type: object
                                seccompProfile:
                                  description: The seccomp options to use by this
                                    container. If seccomp options are provided at
                                    both the pod & container level, the container
                                    options override the pod options.
                                  properties:
                                    localhostProfile:
                                      description: localhostProfile indicates a profile
                                        defined in a file on the node should be used.
                                        The profile must be preconfigured on the node
                                        to work. Must be a descending path, relative
                                        to the kubelet's configured seccomp profile
                                        location. Must only be set if type is "Localhost".
                                      type: string
                                    type:
                                      description: "type indicates which kind of seccomp
                                        profile will be applied. Valid options are:
                                        \n Localhost - a profile defined in a file
                                        on the node should be used. RuntimeDefault
                                        - the container runtime default profile should
                                        be used. Unconfined - no profile should be
                                        applied."
                                      type: string
                                  required:
                                  - type
                                  type: object
                                windowsOptions:
                                  description: The Windows specific settings applied
                                    to all containers. If unspecified, the options
                                    from the PodSecurityContext will be used. If set
                                    in both SecurityContext and PodSecurityContext,
                                    the value specified in SecurityContext takes precedence.
                                  properties:
                                    gmsaCredentialSpec:
                                      description: GMSACredentialSpec is where the
                                        GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa)
                                        inlines the contents of the GMSA credential
                                        spec named by the GMSACredentialSpecName field.
                                      type: string
                                    gmsaCredentialSpecName:
                                      description: GMSACredentialSpecName is the name
                                        of the GMSA credential spec to use.
                                      type: string
                                    runAsUserName:
                                      description: The UserName in Windows to run
                                        the entrypoint of the container process. Defaults
                                        to the user specified in image metadata if
                                        unspecified. May also be set in PodSecurityContext.
                                        If set in both SecurityContext and PodSecurityContext,
                                        the value specified in SecurityContext takes
                                        precedence.
                                      type: string
                                  type: object
                              type: object
                            startupProbe:
                              description: Probes are not allowed for ephemeral containers.
                              properties:
                                exec:
                                  description: One and only one of the following should
                                    be specified. Exec specifies the action to take.
                                  properties:
                                    command:
                                      description: Command is the command line to
                                        execute inside the container, the working
                                        directory for the command  is root ('/') in
                                        the container's filesystem. The command is
                                        simply exec'd, it is not run inside a shell,
                                        so traditional shell instructions ('|', etc)
                                        won't work. To use a shell, you need to explicitly
                                        call out to that shell. Exit status of 0 is
                                        treated as live/healthy and non-zero is unhealthy.
                                      items:
                                        type: string
                                      type: array
                                  type: object
                                failureThreshold:
                                  description: Minimum consecutive failures for the
                                    probe to be considered failed after having succeeded.
                                    Defaults to 3. Minimum value is 1.
                                  format: int32
                                  type: integer
                                httpGet:
                                  description: HTTPGet specifies the http request
                                    to perform.
                                  properties:
                                    host:
                                      description: Host name to connect to, defaults
                                        to the pod IP. You probably want to set "Host"
                                        in httpHeaders instead.
                                      type: string
                                    httpHeaders:
                                      description: Custom headers to set in the request.
                                        HTTP allows repeated headers.
                                      items:
                                        description: HTTPHeader describes a custom
                                          header to be used in HTTP probes
                                        properties:
                                          name:
                                            description: The header field name
                                            type: string
                                          value:
                                            description: The header field value
                                            type: string
                                        required:
                                        - name
                                        - value
                                        type: object
                                      type: array
                                    path:
                                      description: Path to access on the HTTP server.
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Name or number of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                    scheme:
                                      description: Scheme to use for connecting to
                                        the host. Defaults to HTTP.
                                      type: string
                                  required:
                                  - port
                                  type: object
                                initialDelaySeconds:
                                  description: 'Number of seconds after the container
                                    has started before liveness probes are initiated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                                periodSeconds:
                                  description: How often (in seconds) to perform the
                                    probe. Default to 10 seconds. Minimum value is
                                    1.
                                  format: int32
                                  type: integer
                                successThreshold:
                                  description: Minimum consecutive successes for the
                                    probe to be considered successful after having
                                    failed. Defaults to 1. Must be 1 for liveness
                                    and startup. Minimum value is 1.
                                  format: int32
                                  type: integer
                                tcpSocket:
                                  description: 'TCPSocket specifies an action involving
                                    a TCP port. TCP hooks not yet supported TODO:
                                    implement a realistic TCP lifecycle hook'
                                  properties:
                                    host:
                                      description: 'Optional: Host name to connect
                                        to, defaults to the pod IP.'
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Number or name of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                  required:
                                  - port
                                  type: object
                                terminationGracePeriodSeconds:
                                  description: Optional duration in seconds the pod
                                    needs to terminate gracefully upon probe failure.
                                    The grace period is the duration in seconds after
                                    the processes running in the pod are sent a termination
                                    signal and the time when the processes are forcibly
                                    halted with a kill signal. Set this value longer
                                    than the expected cleanup time for your process.
                                    If this value is nil, the pod's terminationGracePeriodSeconds
                                    will be used. Otherwise, this value overrides
                                    the value provided by the pod spec. Value must
                                    be non-negative integer. The value zero indicates
                                    stop immediately via the kill signal (no opportunity
                                    to shut down). This is an alpha field and requires
                                    enabling ProbeTerminationGracePeriod feature gate.
                                  format: int64
                                  type: integer
                                timeoutSeconds:
                                  description: 'Number of seconds after which the
                                    probe times out. Defaults to 1 second. Minimum
                                    value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                              type: object
                            stdin:
                              description: Whether this container should allocate
                                a buffer for stdin in the container runtime. If this
                                is not set, reads from stdin in the container will
                                always result in EOF. Default is false.
                              type: boolean
                            stdinOnce:
                              description: Whether the container runtime should close
                                the stdin channel after it has been opened by a single
                                attach. When stdin is true the stdin stream will remain
                                open across multiple attach sessions. If stdinOnce
                                is set to true, stdin is opened on container start,
                                is empty until the first client attaches to stdin,
                                and then remains open and accepts data until the client
                                disconnects, at which time stdin is closed and remains
                                closed until the container is restarted. If this flag
                                is false, a container processes that reads from stdin
                                will never receive an EOF. Default is false
                              type: boolean
                            targetContainerName:
                              description: If set, the name of the container from
                                PodSpec that this ephemeral container targets. The
                                ephemeral container will be run in the namespaces
                                (IPC, PID, etc) of this container. If not set then
                                the ephemeral container is run in whatever namespaces
                                are shared for the pod. Note that the container runtime
                                must support this feature.
                              type: string
                            terminationMessagePath:
                              description: 'Optional: Path at which the file to which
                                the container''s termination message will be written
                                is mounted into the container''s filesystem. Message
                                written is intended to be brief final status, such
                                as an assertion failure message. Will be truncated
                                by the node if greater than 4096 bytes. The total
                                message length across all containers will be limited
                                to 12kb. Defaults to /dev/termination-log. Cannot
                                be updated.'
                              type: string
                            terminationMessagePolicy:
                              description: Indicate how the termination message should
                                be populated. File will use the contents of terminationMessagePath
                                to populate the container status message on both success
                                and failure. FallbackToLogsOnError will use the last
                                chunk of container log output if the termination message
                                file is empty and the container exited with an error.
                                The log output is limited to 2048 bytes or 80 lines,
                                whichever is smaller. Defaults to File. Cannot be
                                updated.
                              type: string
                            tty:
                              description: Whether this container should allocate
                                a TTY for itself, also requires 'stdin' to be true.
                                Default is false.
                              type: boolean
                            volumeDevices:
                              description: volumeDevices is the list of block devices
                                to be used by the container.
                              items:
                                description: volumeDevice describes a mapping of a
                                  raw block device within a container.
                                properties:
                                  devicePath:
                                    description: devicePath is the path inside of
                                      the container that the device will be mapped
                                      to.
                                    type: string
                                  name:
                                    description: name must match the name of a persistentVolumeClaim
                                      in the pod
                                    type: string
                                required:
                                - devicePath
                                - name
                                type: object
                              type: array
                            volumeMounts:
                              description: Pod volumes to mount into the container's
                                filesystem. Cannot be updated.
                              items:
                                description: VolumeMount describes a mounting of a
                                  Volume within a container.
                                properties:
                                  mountPath:
                                    description: Path within the container at which
                                      the volume should be mounted.  Must not contain
                                      ':'.
                                    type: string
                                  mountPropagation:
                                    description: mountPropagation determines how mounts
                                      are propagated from the host to container and
                                      the other way around. When not set, MountPropagationNone
                                      is used. This field is beta in 1.10.
                                    type: string
                                  name:
                                    description: This must match the Name of a Volume.
                                    type: string
                                  readOnly:
                                    description: Mounted read-only if true, read-write
                                      otherwise (false or unspecified). Defaults to
                                      false.
                                    type: boolean
                                  subPath:
                                    description: Path within the volume from which
                                      the container's volume should be mounted. Defaults
                                      to "" (volume's root).
                                    type: string
                                  subPathExpr:
                                    description: Expanded path within the volume from
                                      which the container's volume should be mounted.
                                      Behaves similarly to SubPath but environment
                                      variable references $(VAR_NAME) are expanded
                                      using the container's environment. Defaults
                                      to "" (volume's root). SubPathExpr and SubPath
                                      are mutually exclusive.
                                    type: string
                                required:
                                - mountPath
                                - name
                                type: object
                              type: array
                            workingDir:
                              description: Container's working directory. If not specified,
                                the container runtime's default will be used, which
                                might be configured in the container image. Cannot
                                be updated.
                              type: string
                          required:
                          - name
                          type: object
                        type: array
                      hostAliases:
                        description: HostAliases is an optional list of hosts and
                          IPs that will be injected into the pod's hosts file if specified.
                          This is only valid for non-hostNetwork pods.
                        items:
                          description: HostAlias holds the mapping between IP and
                            hostnames that will be injected as an entry in the pod's
                            hosts file.
                          properties:
                            hostnames:
                              description: Hostnames for the above IP address.
                              items:
                                type: string
                              type: array
                            ip:
                              description: IP address of the host file entry.
                              type: string
                          type: object
                        type: array
                      hostIPC:
                        description: 'Use the host''s ipc namespace. Optional: Default
                          to false.'
                        type: boolean
                      hostNetwork:
                        description: Host networking requested for this pod. Use the
                          host's network namespace. If this option is set, the ports
                          that will be used must be specified. Default to false.
                        type: boolean
                      hostPID:
                        description: 'Use the host''s pid namespace. Optional: Default
                          to false.'
                        type: boolean
                      hostname:
                        description: Specifies the hostname of the Pod If not specified,
                          the pod's hostname will be set to a system-defined value.
                        type: string
                      imagePullSecrets:
                        description: 'ImagePullSecrets is an optional list of references
                          to secrets in the same namespace to use for pulling any
                          of the images used by this PodSpec. If specified, these
                          secrets will be passed to individual puller implementations
                          for them to use. For example, in the case of docker, only
                          DockerConfig type secrets are honored. More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod'
                        items:
                          description: LocalObjectReference contains enough information
                            to let you locate the referenced object inside the same
                            namespace.
                          properties:
                            name:
                              description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                TODO: Add other useful fields. apiVersion, kind, uid?'
                              type: string
                          type: object
                        type: array
                      initContainers:
                        description: 'List of initialization containers belonging
                          to the pod. Init containers are executed in order prior
                          to containers being started. If any init container fails,
                          the pod is considered to have failed and is handled according
                          to its restartPolicy. The name for an init container or
                          normal container must be unique among all containers. Init
                          containers may not have Lifecycle actions, Readiness probes,
                          Liveness probes, or Startup probes. The resourceRequirements
                          of an init container are taken into account during scheduling
                          by finding the highest request/limit for each resource type,
                          and then using the max of of that value or the sum of the
                          normal containers. Limits are applied to init containers
                          in a similar fashion. Init containers cannot currently be
                          added or removed. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/'
                        items:
                          description: A single application container that you want
                            to run within a pod.
                          properties:
                            args:
                              description: 'Arguments to the entrypoint. The docker
                                image''s CMD is used if this is not provided. Variable
                                references $(VAR_NAME) are expanded using the container''s
                                environment. If a variable cannot be resolved, the
                                reference in the input string will be unchanged. The
                                $(VAR_NAME) syntax can be escaped with a double $$,
                                ie: $$(VAR_NAME). Escaped references will never be
                                expanded, regardless of whether the variable exists
                                or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell'
                              items:
                                type: string
                              type: array
                            command:
                              description: 'Entrypoint array. Not executed within
                                a shell. The docker image''s ENTRYPOINT is used if
                                this is not provided. Variable references $(VAR_NAME)
                                are expanded using the container''s environment. If
                                a variable cannot be resolved, the reference in the
                                input string will be unchanged. The $(VAR_NAME) syntax
                                can be escaped with a double $$, ie: $$(VAR_NAME).
                                Escaped references will never be expanded, regardless
                                of whether the variable exists or not. Cannot be updated.
                                More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell'
                              items:
                                type: string
                              type: array
                            env:
                              description: List of environment variables to set in
                                the container. Cannot be updated.
                              items:
                                description: EnvVar represents an environment variable
                                  present in a Container.
                                properties:
                                  name:
                                    description: Name of the environment variable.
                                      Must be a C_IDENTIFIER.
                                    type: string
                                  value:
                                    description: 'Variable references $(VAR_NAME)
                                      are expanded using the previous defined environment
                                      variables in the container and any service environment
                                      variables. If a variable cannot be resolved,
                                      the reference in the input string will be unchanged.
                                      The $(VAR_NAME) syntax can be escaped with a
                                      double $$, ie: $$(VAR_NAME). Escaped references
                                      will never be expanded, regardless of whether
                                      the variable exists or not. Defaults to "".'
                                    type: string
                                  valueFrom:
                                    description: Source for the environment variable's
                                      value. Cannot be used if value is not empty.
                                    properties:
                                      configMapKeyRef:
                                        description: Selects a key of a ConfigMap.
                                        properties:
                                          key:
                                            description: The key to select.
                                            type: string
                                          name:
                                            description: 'Name of the referent. More
                                              info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                              TODO: Add other useful fields. apiVersion,
                                              kind, uid?'
                                            type: string
                                          optional:
                                            description: Specify whether the ConfigMap
                                              or its key must be defined
                                            type: boolean
                                        required:
                                        - key
                                        type: object
                                      fieldRef:
                                        description: 'Selects a field of the pod:
                                          supports metadata.name, metadata.namespace,
                                          `metadata.labels[''<KEY>'']`, `metadata.annotations[''<KEY>'']`,
                                          spec.nodeName, spec.serviceAccountName,
                                          status.hostIP, status.podIP, status.podIPs.'
                                        properties:
                                          apiVersion:
                                            description: Version of the schema the
                                              FieldPath is written in terms of, defaults
                                              to "v1".
                                            type: string
                                          fieldPath:
                                            description: Path of the field to select
                                              in the specified API version.
                                            type: string
                                        required:
                                        - fieldPath
                                        type: object
                                      resourceFieldRef:
                                        description: 'Selects a resource of the container:
                                          only resources limits and requests (limits.cpu,
                                          limits.memory, limits.ephemeral-storage,
                                          requests.cpu, requests.memory and requests.ephemeral-storage)
                                          are currently supported.'
                                        properties:
                                          containerName:
                                            description: 'Container name: required
                                              for volumes, optional for env vars'
                                            type: string
                                          divisor:
                                            anyOf:
                                            - type: integer
                                            - type: string
                                            description: Specifies the output format
                                              of the exposed resources, defaults to
                                              "1"
                                            pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                            x-kubernetes-int-or-string: true
                                          resource:
                                            description: 'Required: resource to select'
                                            type: string
                                        required:
                                        - resource
                                        type: object
                                      secretKeyRef:
                                        description: Selects a key of a secret in
                                          the pod's namespace
                                        properties:
                                          key:
                                            description: The key of the secret to
                                              select from.  Must be a valid secret
                                              key.
                                            type: string
                                          name:
                                            description: 'Name of the referent. More
                                              info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                              TODO: Add other useful fields. apiVersion,
                                              kind, uid?'
                                            type: string
                                          optional:
                                            description: Specify whether the Secret
                                              or its key must be defined
                                            type: boolean
                                        required:
                                        - key
                                        type: object
                                    type: object
                                required:
                                - name
                                type: object
                              type: array
                            envFrom:
                              description: List of sources to populate environment
                                variables in the container. The keys defined within
                                a source must be a C_IDENTIFIER. All invalid keys
                                will be reported as an event when the container is
                                starting. When a key exists in multiple sources, the
                                value associated with the last source will take precedence.
                                Values defined by an Env with a duplicate key will
                                take precedence. Cannot be updated.
                              items:
                                description: EnvFromSource represents the source of
                                  a set of ConfigMaps
                                properties:
                                  configMapRef:
                                    description: The ConfigMap to select from
                                    properties:
                                      name:
                                        description: 'Name of the referent. More info:
                                          https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          TODO: Add other useful fields. apiVersion,
                                          kind, uid?'
                                        type: string
                                      optional:
                                        description: Specify whether the ConfigMap
                                          must be defined
                                        type: boolean
                                    type: object
                                  prefix:
                                    description: An optional identifier to prepend
                                      to each key in the ConfigMap. Must be a C_IDENTIFIER.
                                    type: string
                                  secretRef:
                                    description: The Secret to select from
                                    properties:
                                      name:
                                        description: 'Name of the referent. More info:
                                          https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                          TODO: Add other useful fields. apiVersion,
                                          kind, uid?'
                                        type: string
                                      optional:
                                        description: Specify whether the Secret must
                                          be defined
                                        type: boolean
                                    type: object
                                type: object
                              type: array
                            image:
                              description: 'Docker image name. More info: https://kubernetes.io/docs/concepts/containers/images
                                This field is optional to allow higher level config
                                management to default or override container images
                                in workload controllers like Deployments and StatefulSets.'
                              type: string
                            imagePullPolicy:
                              description: 'Image pull policy. One of Always, Never,
                                IfNotPresent. Defaults to Always if :latest tag is
                                specified, or IfNotPresent otherwise. Cannot be updated.
                                More info: https://kubernetes.io/docs/concepts/containers/images#updating-images'
                              type: string
                            lifecycle:
                              description: Actions that the management system should
                                take in response to container lifecycle events. Cannot
                                be updated.
                              properties:
                                postStart:
                                  description: 'PostStart is called immediately after
                                    a container is created. If the handler fails,
                                    the container is terminated and restarted according
                                    to its restart policy. Other management of the
                                    container blocks until the hook completes. More
                                    info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks'
                                  properties:
                                    exec:
                                      description: One and only one of the following
                                        should be specified. Exec specifies the action
                                        to take.
                                      properties:
                                        command:
                                          description: Command is the command line
                                            to execute inside the container, the working
                                            directory for the command  is root ('/')
                                            in the container's filesystem. The command
                                            is simply exec'd, it is not run inside
                                            a shell, so traditional shell instructions
                                            ('|', etc) won't work. To use a shell,
                                            you need to explicitly call out to that
                                            shell. Exit status of 0 is treated as
                                            live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies the http request
                                        to perform.
                                      properties:
                                        host:
                                          description: Host name to connect to, defaults
                                            to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the
                                            request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom
                                              header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: The header field name
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                            - name
                                            - value
                                            type: object
                                          type: array
                                        path:
                                          description: Path to access on the HTTP
                                            server.
                                          type: string
                                        port:
                                          anyOf:
                                          - type: integer
                                          - type: string
                                          description: Name or number of the port
                                            to access on the container. Number must
                                            be in the range 1 to 65535. Name must
                                            be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: Scheme to use for connecting
                                            to the host. Defaults to HTTP.
                                          type: string
                                      required:
                                      - port
                                      type: object
                                    tcpSocket:
                                      description: 'TCPSocket specifies an action
                                        involving a TCP port. TCP hooks not yet supported
                                        TODO: implement a realistic TCP lifecycle
                                        hook'
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect
                                            to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                          - type: integer
                                          - type: string
                                          description: Number or name of the port
                                            to access on the container. Number must
                                            be in the range 1 to 65535. Name must
                                            be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                      - port
                                      type: object
                                  type: object
                                preStop:
                                  description: 'PreStop is called immediately before
                                    a container is terminated due to an API request
                                    or management event such as liveness/startup probe
                                    failure, preemption, resource contention, etc.
                                    The handler is not called if the container crashes
                                    or exits. The reason for termination is passed
                                    to the handler. The Pod''s termination grace period
                                    countdown begins before the PreStop hooked is
                                    executed. Regardless of the outcome of the handler,
                                    the container will eventually terminate within
                                    the Pod''s termination grace period. Other management
                                    of the container blocks until the hook completes
                                    or until the termination grace period is reached.
                                    More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks'
                                  properties:
                                    exec:
                                      description: One and only one of the following
                                        should be specified. Exec specifies the action
                                        to take.
                                      properties:
                                        command:
                                          description: Command is the command line
                                            to execute inside the container, the working
                                            directory for the command  is root ('/')
                                            in the container's filesystem. The command
                                            is simply exec'd, it is not run inside
                                            a shell, so traditional shell instructions
                                            ('|', etc) won't work. To use a shell,
                                            you need to explicitly call out to that
                                            shell. Exit status of 0 is treated as
                                            live/healthy and non-zero is unhealthy.
                                          items:
                                            type: string
                                          type: array
                                      type: object
                                    httpGet:
                                      description: HTTPGet specifies the http request
                                        to perform.
                                      properties:
                                        host:
                                          description: Host name to connect to, defaults
                                            to the pod IP. You probably want to set
                                            "Host" in httpHeaders instead.
                                          type: string
                                        httpHeaders:
                                          description: Custom headers to set in the
                                            request. HTTP allows repeated headers.
                                          items:
                                            description: HTTPHeader describes a custom
                                              header to be used in HTTP probes
                                            properties:
                                              name:
                                                description: The header field name
                                                type: string
                                              value:
                                                description: The header field value
                                                type: string
                                            required:
                                            - name
                                            - value
                                            type: object
                                          type: array
                                        path:
                                          description: Path to access on the HTTP
                                            server.
                                          type: string
                                        port:
                                          anyOf:
                                          - type: integer
                                          - type: string
                                          description: Name or number of the port
                                            to access on the container. Number must
                                            be in the range 1 to 65535. Name must
                                            be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                        scheme:
                                          description: Scheme to use for connecting
                                            to the host. Defaults to HTTP.
                                          type: string
                                      required:
                                      - port
                                      type: object
                                    tcpSocket:
                                      description: 'TCPSocket specifies an action
                                        involving a TCP port. TCP hooks not yet supported
                                        TODO: implement a realistic TCP lifecycle
                                        hook'
                                      properties:
                                        host:
                                          description: 'Optional: Host name to connect
                                            to, defaults to the pod IP.'
                                          type: string
                                        port:
                                          anyOf:
                                          - type: integer
                                          - type: string
                                          description: Number or name of the port
                                            to access on the container. Number must
                                            be in the range 1 to 65535. Name must
                                            be an IANA_SVC_NAME.
                                          x-kubernetes-int-or-string: true
                                      required:
                                      - port
                                      type: object
                                  type: object
                              type: object
                            livenessProbe:
                              description: 'Periodic probe of container liveness.
                                Container will be restarted if the probe fails. Cannot
                                be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                              properties:
                                exec:
                                  description: One and only one of the following should
                                    be specified. Exec specifies the action to take.
                                  properties:
                                    command:
                                      description: Command is the command line to
                                        execute inside the container, the working
                                        directory for the command  is root ('/') in
                                        the container's filesystem. The command is
                                        simply exec'd, it is not run inside a shell,
                                        so traditional shell instructions ('|', etc)
                                        won't work. To use a shell, you need to explicitly
                                        call out to that shell. Exit status of 0 is
                                        treated as live/healthy and non-zero is unhealthy.
                                      items:
                                        type: string
                                      type: array
                                  type: object
                                failureThreshold:
                                  description: Minimum consecutive failures for the
                                    probe to be considered failed after having succeeded.
                                    Defaults to 3. Minimum value is 1.
                                  format: int32
                                  type: integer
                                httpGet:
                                  description: HTTPGet specifies the http request
                                    to perform.
                                  properties:
                                    host:
                                      description: Host name to connect to, defaults
                                        to the pod IP. You probably want to set "Host"
                                        in httpHeaders instead.
                                      type: string
                                    httpHeaders:
                                      description: Custom headers to set in the request.
                                        HTTP allows repeated headers.
                                      items:
                                        description: HTTPHeader describes a custom
                                          header to be used in HTTP probes
                                        properties:
                                          name:
                                            description: The header field name
                                            type: string
                                          value:
                                            description: The header field value
                                            type: string
                                        required:
                                        - name
                                        - value
                                        type: object
                                      type: array
                                    path:
                                      description: Path to access on the HTTP server.
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Name or number of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                    scheme:
                                      description: Scheme to use for connecting to
                                        the host. Defaults to HTTP.
                                      type: string
                                  required:
                                  - port
                                  type: object
                                initialDelaySeconds:
                                  description: 'Number of seconds after the container
                                    has started before liveness probes are initiated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                                periodSeconds:
                                  description: How often (in seconds) to perform the
                                    probe. Default to 10 seconds. Minimum value is
                                    1.
                                  format: int32
                                  type: integer
                                successThreshold:
                                  description: Minimum consecutive successes for the
                                    probe to be considered successful after having
                                    failed. Defaults to 1. Must be 1 for liveness
                                    and startup. Minimum value is 1.
                                  format: int32
                                  type: integer
                                tcpSocket:
                                  description: 'TCPSocket specifies an action involving
                                    a TCP port. TCP hooks not yet supported TODO:
                                    implement a realistic TCP lifecycle hook'
                                  properties:
                                    host:
                                      description: 'Optional: Host name to connect
                                        to, defaults to the pod IP.'
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Number or name of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                  required:
                                  - port
                                  type: object
                                terminationGracePeriodSeconds:
                                  description: Optional duration in seconds the pod
                                    needs to terminate gracefully upon probe failure.
                                    The grace period is the duration in seconds after
                                    the processes running in the pod are sent a termination
                                    signal and the time when the processes are forcibly
                                    halted with a kill signal. Set this value longer
                                    than the expected cleanup time for your process.
                                    If this value is nil, the pod's terminationGracePeriodSeconds
                                    will be used. Otherwise, this value overrides
                                    the value provided by the pod spec. Value must
                                    be non-negative integer. The value zero indicates
                                    stop immediately via the kill signal (no opportunity
                                    to shut down). This is an alpha field and requires
                                    enabling ProbeTerminationGracePeriod feature gate.
                                  format: int64
                                  type: integer
                                timeoutSeconds:
                                  description: 'Number of seconds after which the
                                    probe times out. Defaults to 1 second. Minimum
                                    value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                              type: object
                            name:
                              description: Name of the container specified as a DNS_LABEL.
                                Each container in a pod must have a unique name (DNS_LABEL).
                                Cannot be updated.
                              type: string
                            ports:
                              description: List of ports to expose from the container.
                                Exposing a port here gives the system additional information
                                about the network connections a container uses, but
                                is primarily informational. Not specifying a port
                                here DOES NOT prevent that port from being exposed.
                                Any port which is listening on the default "0.0.0.0"
                                address inside a container will be accessible from
                                the network. Cannot be updated.
                              items:
                                description: ContainerPort represents a network port
                                  in a single container.
                                properties:
                                  containerPort:
                                    description: Number of port to expose on the pod's
                                      IP address. This must be a valid port number,
                                      0 < x < 65536.
                                    format: int32
                                    type: integer
                                  hostIP:
                                    description: What host IP to bind the external
                                      port to.
                                    type: string
                                  hostPort:
                                    description: Number of port to expose on the host.
                                      If specified, this must be a valid port number,
                                      0 < x < 65536. If HostNetwork is specified,
                                      this must match ContainerPort. Most containers
                                      do not need this.
                                    format: int32
                                    type: integer
                                  name:
                                    description: If specified, this must be an IANA_SVC_NAME
                                      and unique within the pod. Each named port in
                                      a pod must have a unique name. Name for the
                                      port that can be referred to by services.
                                    type: string
                                  protocol:
                                    default: TCP
                                    description: Protocol for port. Must be UDP, TCP,
                                      or SCTP. Defaults to "TCP".
                                    type: string
                                required:
                                - containerPort
                                type: object
                              type: array
                              x-kubernetes-list-map-keys:
                              - containerPort
                              - protocol
                              x-kubernetes-list-type: map
                            readinessProbe:
                              description: 'Periodic probe of container service readiness.
                                Container will be removed from service endpoints if
                                the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                              properties:
                                exec:
                                  description: One and only one of the following should
                                    be specified. Exec specifies the action to take.
                                  properties:
                                    command:
                                      description: Command is the command line to
                                        execute inside the container, the working
                                        directory for the command  is root ('/') in
                                        the container's filesystem. The command is
                                        simply exec'd, it is not run inside a shell,
                                        so traditional shell instructions ('|', etc)
                                        won't work. To use a shell, you need to explicitly
                                        call out to that shell. Exit status of 0 is
                                        treated as live/healthy and non-zero is unhealthy.
                                      items:
                                        type: string
                                      type: array
                                  type: object
                                failureThreshold:
                                  description: Minimum consecutive failures for the
                                    probe to be considered failed after having succeeded.
                                    Defaults to 3. Minimum value is 1.
                                  format: int32
                                  type: integer
                                httpGet:
                                  description: HTTPGet specifies the http request
                                    to perform.
                                  properties:
                                    host:
                                      description: Host name to connect to, defaults
                                        to the pod IP. You probably want to set "Host"
                                        in httpHeaders instead.
                                      type: string
                                    httpHeaders:
                                      description: Custom headers to set in the request.
                                        HTTP allows repeated headers.
                                      items:
                                        description: HTTPHeader describes a custom
                                          header to be used in HTTP probes
                                        properties:
                                          name:
                                            description: The header field name
                                            type: string
                                          value:
                                            description: The header field value
                                            type: string
                                        required:
                                        - name
                                        - value
                                        type: object
                                      type: array
                                    path:
                                      description: Path to access on the HTTP server.
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Name or number of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                    scheme:
                                      description: Scheme to use for connecting to
                                        the host. Defaults to HTTP.
                                      type: string
                                  required:
                                  - port
                                  type: object
                                initialDelaySeconds:
                                  description: 'Number of seconds after the container
                                    has started before liveness probes are initiated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                                periodSeconds:
                                  description: How often (in seconds) to perform the
                                    probe. Default to 10 seconds. Minimum value is
                                    1.
                                  format: int32
                                  type: integer
                                successThreshold:
                                  description: Minimum consecutive successes for the
                                    probe to be considered successful after having
                                    failed. Defaults to 1. Must be 1 for liveness
                                    and startup. Minimum value is 1.
                                  format: int32
                                  type: integer
                                tcpSocket:
                                  description: 'TCPSocket specifies an action involving
                                    a TCP port. TCP hooks not yet supported TODO:
                                    implement a realistic TCP lifecycle hook'
                                  properties:
                                    host:
                                      description: 'Optional: Host name to connect
                                        to, defaults to the pod IP.'
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Number or name of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                  required:
                                  - port
                                  type: object
                                terminationGracePeriodSeconds:
                                  description: Optional duration in seconds the pod
                                    needs to terminate gracefully upon probe failure.
                                    The grace period is the duration in seconds after
                                    the processes running in the pod are sent a termination
                                    signal and the time when the processes are forcibly
                                    halted with a kill signal. Set this value longer
                                    than the expected cleanup time for your process.
                                    If this value is nil, the pod's terminationGracePeriodSeconds
                                    will be used. Otherwise, this value overrides
                                    the value provided by the pod spec. Value must
                                    be non-negative integer. The value zero indicates
                                    stop immediately via the kill signal (no opportunity
                                    to shut down). This is an alpha field and requires
                                    enabling ProbeTerminationGracePeriod feature gate.
                                  format: int64
                                  type: integer
                                timeoutSeconds:
                                  description: 'Number of seconds after which the
                                    probe times out. Defaults to 1 second. Minimum
                                    value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                              type: object
                            resources:
                              description: 'Compute Resources required by this container.
                                Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
                              properties:
                                limits:
                                  additionalProperties:
                                    anyOf:
                                    - type: integer
                                    - type: string
                                    pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                    x-kubernetes-int-or-string: true
                                  description: 'Limits describes the maximum amount
                                    of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
                                  type: object
                                requests:
                                  additionalProperties:
                                    anyOf:
                                    - type: integer
                                    - type: string
                                    pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                    x-kubernetes-int-or-string: true
                                  description: 'Requests describes the minimum amount
                                    of compute resources required. If Requests is
                                    omitted for a container, it defaults to Limits
                                    if that is explicitly specified, otherwise to
                                    an implementation-defined value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
                                  type: object
                              type: object
                            securityContext:
                              description: 'Security options the pod should run with.
                                More info: https://kubernetes.io/docs/concepts/policy/security-context/
                                More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/'
                              properties:
                                allowPrivilegeEscalation:
                                  description: 'AllowPrivilegeEscalation controls
                                    whether a process can gain more privileges than
                                    its parent process. This bool directly controls
                                    if the no_new_privs flag will be set on the container
                                    process. AllowPrivilegeEscalation is true always
                                    when the container is: 1) run as Privileged 2)
                                    has CAP_SYS_ADMIN'
                                  type: boolean
                                capabilities:
                                  description: The capabilities to add/drop when running
                                    containers. Defaults to the default set of capabilities
                                    granted by the container runtime.
                                  properties:
                                    add:
                                      description: Added capabilities
                                      items:
                                        description: Capability represent POSIX capabilities
                                          type
                                        type: string
                                      type: array
                                    drop:
                                      description: Removed capabilities
                                      items:
                                        description: Capability represent POSIX capabilities
                                          type
                                        type: string
                                      type: array
                                  type: object
                                privileged:
                                  description: Run container in privileged mode. Processes
                                    in privileged containers are essentially equivalent
                                    to root on the host. Defaults to false.
                                  type: boolean
                                procMount:
                                  description: procMount denotes the type of proc
                                    mount to use for the containers. The default is
                                    DefaultProcMount which uses the container runtime
                                    defaults for readonly paths and masked paths.
                                    This requires the ProcMountType feature flag to
                                    be enabled.
                                  type: string
                                readOnlyRootFilesystem:
                                  description: Whether this container has a read-only
                                    root filesystem. Default is false.
                                  type: boolean
                                runAsGroup:
                                  description: The GID to run the entrypoint of the
                                    container process. Uses runtime default if unset.
                                    May also be set in PodSecurityContext.  If set
                                    in both SecurityContext and PodSecurityContext,
                                    the value specified in SecurityContext takes precedence.
                                  format: int64
                                  type: integer
                                runAsNonRoot:
                                  description: Indicates that the container must run
                                    as a non-root user. If true, the Kubelet will
                                    validate the image at runtime to ensure that it
                                    does not run as UID 0 (root) and fail to start
                                    the container if it does. If unset or false, no
                                    such validation will be performed. May also be
                                    set in PodSecurityContext.  If set in both SecurityContext
                                    and PodSecurityContext, the value specified in
                                    SecurityContext takes precedence.
                                  type: boolean
                                runAsUser:
                                  description: The UID to run the entrypoint of the
                                    container process. Defaults to user specified
                                    in image metadata if unspecified. May also be
                                    set in PodSecurityContext.  If set in both SecurityContext
                                    and PodSecurityContext, the value specified in
                                    SecurityContext takes precedence.
                                  format: int64
                                  type: integer
                                seLinuxOptions:
                                  description: The SELinux context to be applied to
                                    the container. If unspecified, the container runtime
                                    will allocate a random SELinux context for each
                                    container.  May also be set in PodSecurityContext.  If
                                    set in both SecurityContext and PodSecurityContext,
                                    the value specified in SecurityContext takes precedence.
                                  properties:
                                    level:
                                      description: Level is SELinux level label that
                                        applies to the container.
                                      type: string
                                    role:
                                      description: Role is a SELinux role label that
                                        applies to the container.
                                      type: string
                                    type:
                                      description: Type is a SELinux type label that
                                        applies to the container.
                                      type: string
                                    user:
                                      description: User is a SELinux user label that
                                        applies to the container.
                                      type: string
                                  type: object
                                seccompProfile:
                                  description: The seccomp options to use by this
                                    container. If seccomp options are provided at
                                    both the pod & container level, the container
                                    options override the pod options.
                                  properties:
                                    localhostProfile:
                                      description: localhostProfile indicates a profile
                                        defined in a file on the node should be used.
                                        The profile must be preconfigured on the node
                                        to work. Must be a descending path, relative
                                        to the kubelet's configured seccomp profile
                                        location. Must only be set if type is "Localhost".
                                      type: string
                                    type:
                                      description: "type indicates which kind of seccomp
                                        profile will be applied. Valid options are:
                                        \n Localhost - a profile defined in a file
                                        on the node should be used. RuntimeDefault
                                        - the container runtime default profile should
                                        be used. Unconfined - no profile should be
                                        applied."
                                      type: string
                                  required:
                                  - type
                                  type: object
                                windowsOptions:
                                  description: The Windows specific settings applied
                                    to all containers. If unspecified, the options
                                    from the PodSecurityContext will be used. If set
                                    in both SecurityContext and PodSecurityContext,
                                    the value specified in SecurityContext takes precedence.
                                  properties:
                                    gmsaCredentialSpec:
                                      description: GMSACredentialSpec is where the
                                        GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa)
                                        inlines the contents of the GMSA credential
                                        spec named by the GMSACredentialSpecName field.
                                      type: string
                                    gmsaCredentialSpecName:
                                      description: GMSACredentialSpecName is the name
                                        of the GMSA credential spec to use.
                                      type: string
                                    runAsUserName:
                                      description: The UserName in Windows to run
                                        the entrypoint of the container process. Defaults
                                        to the user specified in image metadata if
                                        unspecified. May also be set in PodSecurityContext.
                                        If set in both SecurityContext and PodSecurityContext,
                                        the value specified in SecurityContext takes
                                        precedence.
                                      type: string
                                  type: object
                              type: object
                            startupProbe:
                              description: 'StartupProbe indicates that the Pod has
                                successfully initialized. If specified, no other probes
                                are executed until this completes successfully. If
                                this probe fails, the Pod will be restarted, just
                                as if the livenessProbe failed. This can be used to
                                provide different probe parameters at the beginning
                                of a Pod''s lifecycle, when it might take a long time
                                to load data or warm a cache, than during steady-state
                                operation. This cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                              properties:
                                exec:
                                  description: One and only one of the following should
                                    be specified. Exec specifies the action to take.
                                  properties:
                                    command:
                                      description: Command is the command line to
                                        execute inside the container, the working
                                        directory for the command  is root ('/') in
                                        the container's filesystem. The command is
                                        simply exec'd, it is not run inside a shell,
                                        so traditional shell instructions ('|', etc)
                                        won't work. To use a shell, you need to explicitly
                                        call out to that shell. Exit status of 0 is
                                        treated as live/healthy and non-zero is unhealthy.
                                      items:
                                        type: string
                                      type: array
                                  type: object
                                failureThreshold:
                                  description: Minimum consecutive failures for the
                                    probe to be considered failed after having succeeded.
                                    Defaults to 3. Minimum value is 1.
                                  format: int32
                                  type: integer
                                httpGet:
                                  description: HTTPGet specifies the http request
                                    to perform.
                                  properties:
                                    host:
                                      description: Host name to connect to, defaults
                                        to the pod IP. You probably want to set "Host"
                                        in httpHeaders instead.
                                      type: string
                                    httpHeaders:
                                      description: Custom headers to set in the request.
                                        HTTP allows repeated headers.
                                      items:
                                        description: HTTPHeader describes a custom
                                          header to be used in HTTP probes
                                        properties:
                                          name:
                                            description: The header field name
                                            type: string
                                          value:
                                            description: The header field value
                                            type: string
                                        required:
                                        - name
                                        - value
                                        type: object
                                      type: array
                                    path:
                                      description: Path to access on the HTTP server.
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Name or number of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                    scheme:
                                      description: Scheme to use for connecting to
                                        the host. Defaults to HTTP.
                                      type: string
                                  required:
                                  - port
                                  type: object
                                initialDelaySeconds:
                                  description: 'Number of seconds after the container
                                    has started before liveness probes are initiated.
                                    More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                                periodSeconds:
                                  description: How often (in seconds) to perform the
                                    probe. Default to 10 seconds. Minimum value is
                                    1.
                                  format: int32
                                  type: integer
                                successThreshold:
                                  description: Minimum consecutive successes for the
                                    probe to be considered successful after having
                                    failed. Defaults to 1. Must be 1 for liveness
                                    and startup. Minimum value is 1.
                                  format: int32
                                  type: integer
                                tcpSocket:
                                  description: 'TCPSocket specifies an action involving
                                    a TCP port. TCP hooks not yet supported TODO:
                                    implement a realistic TCP lifecycle hook'
                                  properties:
                                    host:
                                      description: 'Optional: Host name to connect
                                        to, defaults to the pod IP.'
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: Number or name of the port to access
                                        on the container. Number must be in the range
                                        1 to 65535. Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                  required:
                                  - port
                                  type: object
                                terminationGracePeriodSeconds:
                                  description: Optional duration in seconds the pod
                                    needs to terminate gracefully upon probe failure.
                                    The grace period is the duration in seconds after
                                    the processes running in the pod are sent a termination
                                    signal and the time when the processes are forcibly
                                    halted with a kill signal. Set this value longer
                                    than the expected cleanup time for your process.
                                    If this value is nil, the pod's terminationGracePeriodSeconds
                                    will be used. Otherwise, this value overrides
                                    the value provided by the pod spec. Value must
                                    be non-negative integer. The value zero indicates
                                    stop immediately via the kill signal (no opportunity
                                    to shut down). This is an alpha field and requires
                                    enabling ProbeTerminationGracePeriod feature gate.
                                  format: int64
                                  type: integer
                                timeoutSeconds:
                                  description: 'Number of seconds after which the
                                    probe times out. Defaults to 1 second. Minimum
                                    value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                                  format: int32
                                  type: integer
                              type: object
                            stdin:
                              description: Whether this container should allocate
                                a buffer for stdin in the container runtime. If this
                                is not set, reads from stdin in the container will
                                always result in EOF. Default is false.
                              type: boolean
                            stdinOnce:
                              description: Whether the container runtime should close
                                the stdin channel after it has been opened by a single
                                attach. When stdin is true the stdin stream will remain
                                open across multiple attach sessions. If stdinOnce
                                is set to true, stdin is opened on container start,
                                is empty until the first client attaches to stdin,
                                and then remains open and accepts data until the client
                                disconnects, at which time stdin is closed and remains
                                closed until the container is restarted. If this flag
                                is false, a container processes that reads from stdin
                                will never receive an EOF. Default is false
                              type: boolean
                            terminationMessagePath:
                              description: 'Optional: Path at which the file to which
                                the container''s termination message will be written
                                is mounted into the container''s filesystem. Message
                                written is intended to be brief final status, such
                                as an assertion failure message. Will be truncated
                                by the node if greater than 4096 bytes. The total
                                message length across all containers will be limited
                                to 12kb. Defaults to /dev/termination-log. Cannot
                                be updated.'
                              type: string
                            terminationMessagePolicy:
                              description: Indicate how the termination message should
                                be populated. File will use the contents of terminationMessagePath
                                to populate the container status message on both success
                                and failure. FallbackToLogsOnError will use the last
                                chunk of container log output if the termination message
                                file is empty and the container exited with an error.
                                The log output is limited to 2048 bytes or 80 lines,
                                whichever is smaller. Defaults to File. Cannot be
                                updated.
                              type: string
                            tty:
                              description: Whether this container should allocate
                                a TTY for itself, also requires 'stdin' to be true.
                                Default is false.
                              type: boolean
                            volumeDevices:
                              description: volumeDevices is the list of block devices
                                to be used by the container.
                              items:
                                description: volumeDevice describes a mapping of a
                                  raw block device within a container.
                                properties:
                                  devicePath:
                                    description: devicePath is the path inside of
                                      the container that the device will be mapped
                                      to.
                                    type: string
                                  name:
                                    description: name must match the name of a persistentVolumeClaim
                                      in the pod
                                    type: string
                                required:
                                - devicePath
                                - name
                                type: object
                              type: array
                            volumeMounts:
                              description: Pod volumes to mount into the container's
                                filesystem. Cannot be updated.
                              items:
                                description: VolumeMount describes a mounting of a
                                  Volume within a container.
                                properties:
                                  mountPath:
                                    description: Path within the container at which
                                      the volume should be mounted.  Must not contain
                                      ':'.
                                    type: string
                                  mountPropagation:
                                    description: mountPropagation determines how mounts
                                      are propagated from the host to container and
                                      the other way around. When not set, MountPropagationNone
                                      is used. This field is beta in 1.10.
                                    type: string
                                  name:
                                    description: This must match the Name of a Volume.
                                    type: string
                                  readOnly:
                                    description: Mounted read-only if true, read-write
                                      otherwise (false or unspecified). Defaults to
                                      false.
                                    type: boolean
                                  subPath:
                                    description: Path within the volume from which
                                      the container's volume should be mounted. Defaults
                                      to "" (volume's root).
                                    type: string
                                  subPathExpr:
                                    description: Expanded path within the volume from
                                      which the container's volume should be mounted.
                                      Behaves similarly to SubPath but environment
                                      variable references $(VAR_NAME) are expanded
                                      using the container's environment. Defaults
                                      to "" (volume's root). SubPathExpr and SubPath
                                      are mutually exclusive.
                                    type: string
                                required:
                                - mountPath
                                - name
                                type: object
                              type: array
                            workingDir:
                              description: Container's working directory. If not specified,
                                the container runtime's default will be used, which
                                might be configured in the container image. Cannot
                                be updated.
                              type: string
                          required:
                          - name
                          type: object
                        type: array
                      nodeName:
                        description: NodeName is a request to schedule this pod onto
                          a specific node. If it is non-empty, the scheduler simply
                          schedules this pod onto that node, assuming that it fits
                          resource requirements.
                        type: string
                      nodeSelector:
                        additionalProperties:
                          type: string
                        description: 'NodeSelector is a selector which must be true
                          for the pod to fit on a node. Selector which must match
                          a node''s labels for the pod to be scheduled on that node.
                          More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/'
                        type: object
                      overhead:
                        additionalProperties:
                          anyOf:
                          - type: integer
                          - type: string
                          pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                          x-kubernetes-int-or-string: true
                        description: 'Overhead represents the resource overhead associated
                          with running a pod for a given RuntimeClass. This field
                          will be autopopulated at admission time by the RuntimeClass
                          admission controller. If the RuntimeClass admission controller
                          is enabled, overhead must not be set in Pod create requests.
                          The RuntimeClass admission controller will reject Pod create
                          requests which have the overhead already set. If RuntimeClass
                          is configured and selected in the PodSpec, Overhead will
                          be set to the value defined in the corresponding RuntimeClass,
                          otherwise it will remain unset and treated as zero. More
                          info: https://git.k8s.io/enhancements/keps/sig-node/20190226-pod-overhead.md
                          This field is alpha-level as of Kubernetes v1.16, and is
                          only honored by servers that enable the PodOverhead feature.'
                        type: object
                      preemptionPolicy:
                        description: PreemptionPolicy is the Policy for preempting
                          pods with lower priority. One of Never, PreemptLowerPriority.
                          Defaults to PreemptLowerPriority if unset. This field is
                          beta-level, gated by the NonPreemptingPriority feature-gate.
                        type: string
                      priority:
                        description: The priority value. Various system components
                          use this field to find the priority of the pod. When Priority
                          Admission Controller is enabled, it prevents users from
                          setting this field. The admission controller populates this
                          field from PriorityClassName. The higher the value, the
                          higher the priority.
                        format: int32
                        type: integer
                      priorityClassName:
                        description: If specified, indicates the pod's priority. "system-node-critical"
                          and "system-cluster-critical" are two special keywords which
                          indicate the highest priorities with the former being the
                          highest priority. Any other name must be defined by creating
                          a PriorityClass object with that name. If not specified,
                          the pod priority will be default or zero if there is no
                          default.
                        type: string
                      readinessGates:
                        description: 'If specified, all readiness gates will be evaluated
                          for pod readiness. A pod is ready when all its containers
                          are ready AND all conditions specified in the readiness
                          gates have status equal to "True" More info: https://git.k8s.io/enhancements/keps/sig-network/0007-pod-ready%2B%2B.md'
                        items:
                          description: PodReadinessGate contains the reference to
                            a pod condition
                          properties:
                            conditionType:
                              description: ConditionType refers to a condition in
                                the pod's condition list with matching type.
                              type: string
                          required:
                          - conditionType
                          type: object
                        type: array
                      restartPolicy:
                        description: 'Restart policy for all containers within the
                          pod. One of Always, OnFailure, Never. Default to Always.
                          More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy'
                        type: string
                      runtimeClassName:
                        description: 'RuntimeClassName refers to a RuntimeClass object
                          in the node.k8s.io group, which should be used to run this
                          pod.  If no RuntimeClass resource matches the named class,
                          the pod will not be run. If unset or empty, the "legacy"
                          RuntimeClass will be used, which is an implicit class with
                          an empty definition that uses the default runtime handler.
                          More info: https://git.k8s.io/enhancements/keps/sig-node/runtime-class.md
                          This is a beta feature as of Kubernetes v1.14.'
                        type: string
                      schedulerName:
                        description: If specified, the pod will be dispatched by specified
                          scheduler. If not specified, the pod will be dispatched
                          by default scheduler.
                        type: string
                      securityContext:
                        description: 'SecurityContext holds pod-level security attributes
                          and common container settings. Optional: Defaults to empty.  See
                          type description for default values of each field.'
                        properties:
                          fsGroup:
                            description: "A special supplemental group that applies
                              to all containers in a pod. Some volume types allow
                              the Kubelet to change the ownership of that volume to
                              be owned by the pod: \n 1. The owning GID will be the
                              FSGroup 2. The setgid bit is set (new files created
                              in the volume will be owned by FSGroup) 3. The permission
                              bits are OR'd with rw-rw---- \n If unset, the Kubelet
                              will not modify the ownership and permissions of any
                              volume."
                            format: int64
                            type: integer
                          fsGroupChangePolicy:
                            description: 'fsGroupChangePolicy defines behavior of
                              changing ownership and permission of the volume before
                              being exposed inside Pod. This field will only apply
                              to volume types which support fsGroup based ownership(and
                              permissions). It will have no effect on ephemeral volume
                              types such as: secret, configmaps and emptydir. Valid
                              values are "OnRootMismatch" and "Always". If not specified,
                              "Always" is used.'
                            type: string
                          runAsGroup:
                            description: The GID to run the entrypoint of the container
                              process. Uses runtime default if unset. May also be
                              set in SecurityContext.  If set in both SecurityContext
                              and PodSecurityContext, the value specified in SecurityContext
                              takes precedence for that container.
                            format: int64
                            type: integer
                          runAsNonRoot:
                            description: Indicates that the container must run as
                              a non-root user. If true, the Kubelet will validate
                              the image at runtime to ensure that it does not run
                              as UID 0 (root) and fail to start the container if it
                              does. If unset or false, no such validation will be
                              performed. May also be set in SecurityContext.  If set
                              in both SecurityContext and PodSecurityContext, the
                              value specified in SecurityContext takes precedence.
                            type: boolean
                          runAsUser:
                            description: The UID to run the entrypoint of the container
                              process. Defaults to user specified in image metadata
                              if unspecified. May also be set in SecurityContext.  If
                              set in both SecurityContext and PodSecurityContext,
                              the value specified in SecurityContext takes precedence
                              for that container.
                            format: int64
                            type: integer
                          seLinuxOptions:
                            description: The SELinux context to be applied to all
                              containers. If unspecified, the container runtime will
                              allocate a random SELinux context for each container.  May
                              also be set in SecurityContext.  If set in both SecurityContext
                              and PodSecurityContext, the value specified in SecurityContext
                              takes precedence for that container.
                            properties:
                              level:
                                description: Level is SELinux level label that applies
                                  to the container.
                                type: string
                              role:
                                description: Role is a SELinux role label that applies
                                  to the container.
                                type: string
                              type:
                                description: Type is a SELinux type label that applies
                                  to the container.
                                type: string
                              user:
                                description: User is a SELinux user label that applies
                                  to the container.
                                type: string
                            type: object
                          seccompProfile:
                            description: The seccomp options to use by the containers
                              in this pod.
                            properties:
                              localhostProfile:
                                description: localhostProfile indicates a profile
                                  defined in a file on the node should be used. The
                                  profile must be preconfigured on the node to work.
                                  Must be a descending path, relative to the kubelet's
                                  configured seccomp profile location. Must only be
                                  set if type is "Localhost".
                                type: string
                              type:
                                description: "type indicates which kind of seccomp
                                  profile will be applied. Valid options are: \n Localhost
                                  - a profile defined in a file on the node should
                                  be used. RuntimeDefault - the container runtime
                                  default profile should be used. Unconfined - no
                                  profile should be applied."
                                type: string
                            required:
                            - type
                            type: object
                          supplementalGroups:
                            description: A list of groups applied to the first process
                              run in each container, in addition to the container's
                              primary GID.  If unspecified, no groups will be added
                              to any container.
                            items:
                              format: int64
                              type: integer
                            type: array
                          sysctls:
                            description: Sysctls hold a list of namespaced sysctls
                              used for the pod. Pods with unsupported sysctls (by
                              the container runtime) might fail to launch.
                            items:
                              description: Sysctl defines a kernel parameter to be
                                set
                              properties:
                                name:
                                  description: Name of a property to set
                                  type: string
                                value:
                                  description: Value of a property to set
                                  type: string
                              required:
                              - name
                              - value
                              type: object
                            type: array
                          windowsOptions:
                            description: The Windows specific settings applied to
                              all containers. If unspecified, the options within a
                              container's SecurityContext will be used. If set in
                              both SecurityContext and PodSecurityContext, the value
                              specified in SecurityContext takes precedence.
                            properties:
                              gmsaCredentialSpec:
                                description: GMSACredentialSpec is where the GMSA
                                  admission webhook (https://github.com/kubernetes-sigs/windows-gmsa)
                                  inlines the contents of the GMSA credential spec
                                  named by the GMSACredentialSpecName field.
                                type: string
                              gmsaCredentialSpecName:
                                description: GMSACredentialSpecName is the name of
                                  the GMSA credential spec to use.
                                type: string
                              runAsUserName:
                                description: The UserName in Windows to run the entrypoint
                                  of the container process. Defaults to the user specified
                                  in image metadata if unspecified. May also be set
                                  in PodSecurityContext. If set in both SecurityContext
                                  and PodSecurityContext, the value specified in SecurityContext
                                  takes precedence.
                                type: string
                            type: object
                        type: object
                      serviceAccount:
                        description: 'DeprecatedServiceAccount is a depreciated alias
                          for ServiceAccountName. Deprecated: Use serviceAccountName
                          instead.'
                        type: string
                      serviceAccountName:
                        description: 'ServiceAccountName is the name of the ServiceAccount
                          to use to run this pod. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/'
                        type: string
                      setHostnameAsFQDN:
                        description: If true the pod's hostname will be configured
                          as the pod's FQDN, rather than the leaf name (the default).
                          In Linux containers, this means setting the FQDN in the
                          hostname field of the kernel (the nodename field of struct
                          utsname). In Windows containers, this means setting the
                          registry value of hostname for the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters
                          to FQDN. If a pod does not have FQDN, this has no effect.
                          Default to false.
                        type: boolean
                      shareProcessNamespace:
                        description: 'Share a single process namespace between all
                          of the containers in a pod. When this is set containers
                          will be able to view and signal processes from other containers
                          in the same pod, and the first process in each container
                          will not be assigned PID 1. HostPID and ShareProcessNamespace
                          cannot both be set. Optional: Default to false.'
                        type: boolean
                      subdomain:
                        description: If specified, the fully qualified Pod hostname
                          will be "<hostname>.<subdomain>.<pod namespace>.svc.<cluster
                          domain>". If not specified, the pod will not have a domainname
                          at all.
                        type: string
                      terminationGracePeriodSeconds:
                        description: Optional duration in seconds the pod needs to
                          terminate gracefully. May be decreased in delete request.
                          Value must be non-negative integer. The value zero indicates
                          stop immediately via the kill signal (no opportunity to
                          shut down). If this value is nil, the default grace period
                          will be used instead. The grace period is the duration in
                          seconds after the processes running in the pod are sent
                          a termination signal and the time when the processes are
                          forcibly halted with a kill signal. Set this value longer
                          than the expected cleanup time for your process. Defaults
                          to 30 seconds.
                        format: int64
                        type: integer
                      tolerations:
                        description: If specified, the pod's tolerations.
                        items:
                          description: The pod this Toleration is attached to tolerates
                            any taint that matches the triple <key,value,effect> using
                            the matching operator <operator>.
                          properties:
                            effect:
                              description: Effect indicates the taint effect to match.
                                Empty means match all taint effects. When specified,
                                allowed values are NoSchedule, PreferNoSchedule and
                                NoExecute.
                              type: string
                            key:
                              description: Key is the taint key that the toleration
                                applies to. Empty means match all taint keys. If the
                                key is empty, operator must be Exists; this combination
                                means to match all values and all keys.
                              type: string
                            operator:
                              description: Operator represents a key's relationship
                                to the value. Valid operators are Exists and Equal.
                                Defaults to Equal. Exists is equivalent to wildcard
                                for value, so that a pod can tolerate all taints of
                                a particular category.
                              type: string
                            tolerationSeconds:
                              description: TolerationSeconds represents the period
                                of time the toleration (which must be of effect NoExecute,
                                otherwise this field is ignored) tolerates the taint.
                                By default, it is not set, which means tolerate the
                                taint forever (do not evict). Zero and negative values
                                will be treated as 0 (evict immediately) by the system.
                              format: int64
                              type: integer
                            value:
                              description: Value is the taint value the toleration
                                matches to. If the operator is Exists, the value should
                                be empty, otherwise just a regular string.
                              type: string
                          type: object
                        type: array
                      topologySpreadConstraints:
                        description: TopologySpreadConstraints describes how a group
                          of pods ought to spread across topology domains. Scheduler
                          will schedule pods in a way which abides by the constraints.
                          All topologySpreadConstraints are ANDed.
                        items:
                          description: TopologySpreadConstraint specifies how to spread
                            matching pods among the given topology.
                          properties:
                            labelSelector:
                              description: LabelSelector is used to find matching
                                pods. Pods that match this label selector are counted
                                to determine the number of pods in their corresponding
                                topology domain.
                              properties:
                                matchExpressions:
                                  description: matchExpressions is a list of label
                                    selector requirements. The requirements are ANDed.
                                  items:
                                    description: A label selector requirement is a
                                      selector that contains values, a key, and an
                                      operator that relates the key and values.
                                    properties:
                                      key:
                                        description: key is the label key that the
                                          selector applies to.
                                        type: string
                                      operator:
                                        description: operator represents a key's relationship
                                          to a set of values. Valid operators are
                                          In, NotIn, Exists and DoesNotExist.
                                        type: string
                                      values:
                                        description: values is an array of string
                                          values. If the operator is In or NotIn,
                                          the values array must be non-empty. If the
                                          operator is Exists or DoesNotExist, the
                                          values array must be empty. This array is
                                          replaced during a strategic merge patch.
                                        items:
                                          type: string
                                        type: array
                                    required:
                                    - key
                                    - operator
                                    type: object
                                  type: array
                                matchLabels:
                                  additionalProperties:
                                    type: string
                                  description: matchLabels is a map of {key,value}
                                    pairs. A single {key,value} in the matchLabels
                                    map is equivalent to an element of matchExpressions,
                                    whose key field is "key", the operator is "In",
                                    and the values array contains only "value". The
                                    requirements are ANDed.
                                  type: object
                              type: object
                            maxSkew:
                              description: 'MaxSkew describes the degree to which
                                pods may be unevenly distributed. When `whenUnsatisfiable=DoNotSchedule`,
                                it is the maximum permitted difference between the
                                number of matching pods in the target topology and
                                the global minimum. For example, in a 3-zone cluster,
                                MaxSkew is set to 1, and pods with the same labelSelector
                                spread as 1/1/0: | zone1 | zone2 | zone3 | |   P   |   P   |       |
                                - if MaxSkew is 1, incoming pod can only be scheduled
                                to zone3 to become 1/1/1; scheduling it onto zone1(zone2)
                                would make the ActualSkew(2-0) on zone1(zone2) violate
                                MaxSkew(1). - if MaxSkew is 2, incoming pod can be
                                scheduled onto any zone. When `whenUnsatisfiable=ScheduleAnyway`,
                                it is used to give higher precedence to topologies
                                that satisfy it. It''s a required field. Default value
                                is 1 and 0 is not allowed.'
                              format: int32
                              type: integer
                            topologyKey:
                              description: TopologyKey is the key of node labels.
                                Nodes that have a label with this key and identical
                                values are considered to be in the same topology.
                                We consider each <key, value> as a "bucket", and try
                                to put balanced number of pods into each bucket. It's
                                a required field.
                              type: string
                            whenUnsatisfiable:
                              description: 'WhenUnsatisfiable indicates how to deal
                                with a pod if it doesn''t satisfy the spread constraint.
                                - DoNotSchedule (default) tells the scheduler not
                                to schedule it. - ScheduleAnyway tells the scheduler
                                to schedule the pod in any location,   but giving
                                higher precedence to topologies that would help reduce
                                the   skew. A constraint is considered "Unsatisfiable"
                                for an incoming pod if and only if every possible
                                node assigment for that pod would violate "MaxSkew"
                                on some topology. For example, in a 3-zone cluster,
                                MaxSkew is set to 1, and pods with the same labelSelector
                                spread as 3/1/1: | zone1 | zone2 | zone3 | | P P P
                                |   P   |   P   | If WhenUnsatisfiable is set to DoNotSchedule,
                                incoming pod can only be scheduled to zone2(zone3)
                                to become 3/2/1(3/1/2) as ActualSkew(2-1) on zone2(zone3)
                                satisfies MaxSkew(1). In other words, the cluster
                                can still be imbalanced, but scheduler won''t make
                                it *more* imbalanced. It''s a required field.'
                              type: string
                          required:
                          - maxSkew
                          - topologyKey
                          - whenUnsatisfiable
                          type: object
                        type: array
                        x-kubernetes-list-map-keys:
                        - topologyKey
                        - whenUnsatisfiable
                        x-kubernetes-list-type: map
                      volumes:
                        description: 'List of volumes that can be mounted by containers
                          belonging to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes'
                        items:
                          description: Volume represents a named volume in a pod that
                            may be accessed by any container in the pod.
                          properties:
                            awsElasticBlockStore:
                              description: 'AWSElasticBlockStore represents an AWS
                                Disk resource that is attached to a kubelet''s host
                                machine and then exposed to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore'
                              properties:
                                fsType:
                                  description: 'Filesystem type of the volume that
                                    you want to mount. Tip: Ensure that the filesystem
                                    type is supported by the host operating system.
                                    Examples: "ext4", "xfs", "ntfs". Implicitly inferred
                                    to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
                                    TODO: how do we prevent errors in the filesystem
                                    from compromising the machine'
                                  type: string
                                partition:
                                  description: 'The partition in the volume that you
                                    want to mount. If omitted, the default is to mount
                                    by volume name. Examples: For volume /dev/sda1,
                                    you specify the partition as "1". Similarly, the
                                    volume partition for /dev/sda is "0" (or you can
                                    leave the property empty).'
                                  format: int32
                                  type: integer
                                readOnly:
                                  description: 'Specify "true" to force and set the
                                    ReadOnly property in VolumeMounts to "true". If
                                    omitted, the default is "false". More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore'
                                  type: boolean
                                volumeID:
                                  description: 'Unique ID of the persistent disk resource
                                    in AWS (Amazon EBS volume). More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore'
                                  type: string
                              required:
                              - volumeID
                              type: object
                            azureDisk:
                              description: AzureDisk represents an Azure Data Disk
                                mount on the host and bind mount to the pod.
                              properties:
                                cachingMode:
                                  description: 'Host Caching mode: None, Read Only,
                                    Read Write.'
                                  type: string
                                diskName:
                                  description: The Name of the data disk in the blob
                                    storage
                                  type: string
                                diskURI:
                                  description: The URI the data disk in the blob storage
                                  type: string
                                fsType:
                                  description: Filesystem type to mount. Must be a
                                    filesystem type supported by the host operating
                                    system. Ex. "ext4", "xfs", "ntfs". Implicitly
                                    inferred to be "ext4" if unspecified.
                                  type: string
                                kind:
                                  description: 'Expected values Shared: multiple blob
                                    disks per storage account  Dedicated: single blob
                                    disk per storage account  Managed: azure managed
                                    data disk (only in managed availability set).
                                    defaults to shared'
                                  type: string
                                readOnly:
                                  description: Defaults to false (read/write). ReadOnly
                                    here will force the ReadOnly setting in VolumeMounts.
                                  type: boolean
                              required:
                              - diskName
                              - diskURI
                              type: object
                            azureFile:
                              description: AzureFile represents an Azure File Service
                                mount on the host and bind mount to the pod.
                              properties:
                                readOnly:
                                  description: Defaults to false (read/write). ReadOnly
                                    here will force the ReadOnly setting in VolumeMounts.
                                  type: boolean
                                secretName:
                                  description: the name of secret that contains Azure
                                    Storage Account Name and Key
                                  type: string
                                shareName:
                                  description: Share Name
                                  type: string
                              required:
                              - secretName
                              - shareName
                              type: object
                            cephfs:
                              description: CephFS represents a Ceph FS mount on the
                                host that shares a pod's lifetime
                              properties:
                                monitors:
                                  description: 'Required: Monitors is a collection
                                    of Ceph monitors More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
                                  items:
                                    type: string
                                  type: array
                                path:
                                  description: 'Optional: Used as the mounted root,
                                    rather than the full Ceph tree, default is /'
                                  type: string
                                readOnly:
                                  description: 'Optional: Defaults to false (read/write).
                                    ReadOnly here will force the ReadOnly setting
                                    in VolumeMounts. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
                                  type: boolean
                                secretFile:
                                  description: 'Optional: SecretFile is the path to
                                    key ring for User, default is /etc/ceph/user.secret
                                    More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
                                  type: string
                                secretRef:
                                  description: 'Optional: SecretRef is reference to
                                    the authentication secret for User, default is
                                    empty. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
                                  properties:
                                    name:
                                      description: 'Name of the referent. More info:
                                        https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                        TODO: Add other useful fields. apiVersion,
                                        kind, uid?'
                                      type: string
                                  type: object
                                user:
                                  description: 'Optional: User is the rados user name,
                                    default is admin More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
                                  type: string
                              required:
                              - monitors
                              type: object
                            cinder:
                              description: 'Cinder represents a cinder volume attached
                                and mounted on kubelets host machine. More info: https://examples.k8s.io/mysql-cinder-pd/README.md'
                              properties:
                                fsType:
                                  description: 'Filesystem type to mount. Must be
                                    a filesystem type supported by the host operating
                                    system. Examples: "ext4", "xfs", "ntfs". Implicitly
                                    inferred to be "ext4" if unspecified. More info:
                                    https://examples.k8s.io/mysql-cinder-pd/README.md'
                                  type: string
                                readOnly:
                                  description: 'Optional: Defaults to false (read/write).
                                    ReadOnly here will force the ReadOnly setting
                                    in VolumeMounts. More info: https://examples.k8s.io/mysql-cinder-pd/README.md'
                                  type: boolean
                                secretRef:
                                  description: 'Optional: points to a secret object
                                    containing parameters used to connect to OpenStack.'
                                  properties:
                                    name:
                                      description: 'Name of the referent. More info:
                                        https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                        TODO: Add other useful fields. apiVersion,
                                        kind, uid?'
                                      type: string
                                  type: object
                                volumeID:
                                  description: 'volume id used to identify the volume
                                    in cinder. More info: https://examples.k8s.io/mysql-cinder-pd/README.md'
                                  type: string
                              required:
                              - volumeID
                              type: object
                            configMap:
                              description: ConfigMap represents a configMap that should
                                populate this volume
                              properties:
                                defaultMode:
                                  description: 'Optional: mode bits used to set permissions
                                    on created files by default. Must be an octal
                                    value between 0000 and 0777 or a decimal value
                                    between 0 and 511. YAML accepts both octal and
                                    decimal values, JSON requires decimal values for
                                    mode bits. Defaults to 0644. Directories within
                                    the path are not affected by this setting. This
                                    might be in conflict with other options that affect
                                    the file mode, like fsGroup, and the result can
                                    be other mode bits set.'
                                  format: int32
                                  type: integer
                                items:
                                  description: If unspecified, each key-value pair
                                    in the Data field of the referenced ConfigMap
                                    will be projected into the volume as a file whose
                                    name is the key and content is the value. If specified,
                                    the listed keys will be projected into the specified
                                    paths, and unlisted keys will not be present.
                                    If a key is specified which is not present in
                                    the ConfigMap, the volume setup will error unless
                                    it is marked optional. Paths must be relative
                                    and may not contain the '..' path or start with
                                    '..'.
                                  items:
                                    description: Maps a string key to a path within
                                      a volume.
                                    properties:
                                      key:
                                        description: The key to project.
                                        type: string
                                      mode:
                                        description: 'Optional: mode bits used to
                                          set permissions on this file. Must be an
                                          octal value between 0000 and 0777 or a decimal
                                          value between 0 and 511. YAML accepts both
                                          octal and decimal values, JSON requires
                                          decimal values for mode bits. If not specified,
                                          the volume defaultMode will be used. This
                                          might be in conflict with other options
                                          that affect the file mode, like fsGroup,
                                          and the result can be other mode bits set.'
                                        format: int32
                                        type: integer
                                      path:
                                        description: The relative path of the file
                                          to map the key to. May not be an absolute
                                          path. May not contain the path element '..'.
                                          May not start with the string '..'.
                                        type: string
                                    required:
                                    - key
                                    - path
                                    type: object
                                  type: array
                                name:
                                  description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                    TODO: Add other useful fields. apiVersion, kind,
                                    uid?'
                                  type: string
                                optional:
                                  description: Specify whether the ConfigMap or its
                                    keys must be defined
                                  type: boolean
                              type: object
                            csi:
                              description: CSI (Container Storage Interface) represents
                                ephemeral storage that is handled by certain external
                                CSI drivers (Beta feature).
                              properties:
                                driver:
                                  description: Driver is the name of the CSI driver
                                    that handles this volume. Consult with your admin
                                    for the correct name as registered in the cluster.
                                  type: string
                                fsType:
                                  description: Filesystem type to mount. Ex. "ext4",
                                    "xfs", "ntfs". If not provided, the empty value
                                    is passed to the associated CSI driver which will
                                    determine the default filesystem to apply.
                                  type: string
                                nodePublishSecretRef:
                                  description: NodePublishSecretRef is a reference
                                    to the secret object containing sensitive information
                                    to pass to the CSI driver to complete the CSI
                                    NodePublishVolume and NodeUnpublishVolume calls.
                                    This field is optional, and  may be empty if no
                                    secret is required. If the secret object contains
                                    more than one secret, all secret references are
                                    passed.
                                  properties:
                                    name:
                                      description: 'Name of the referent. More info:
                                        https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                        TODO: Add other useful fields. apiVersion,
                                        kind, uid?'
                                      type: string
                                  type: object
                                readOnly:
                                  description: Specifies a read-only configuration
                                    for the volume. Defaults to false (read/write).
                                  type: boolean
                                volumeAttributes:
                                  additionalProperties:
                                    type: string
                                  description: VolumeAttributes stores driver-specific
                                    properties that are passed to the CSI driver.
                                    Consult your driver's documentation for supported
                                    values.
                                  type: object
                              required:
                              - driver
                              type: object
                            downwardAPI:
                              description: DownwardAPI represents downward API about
                                the pod that should populate this volume
                              properties:
                                defaultMode:
                                  description: 'Optional: mode bits to use on created
                                    files by default. Must be a Optional: mode bits
                                    used to set permissions on created files by default.
                                    Must be an octal value between 0000 and 0777 or
                                    a decimal value between 0 and 511. YAML accepts
                                    both octal and decimal values, JSON requires decimal
                                    values for mode bits. Defaults to 0644. Directories
                                    within the path are not affected by this setting.
                                    This might be in conflict with other options that
                                    affect the file mode, like fsGroup, and the result
                                    can be other mode bits set.'
                                  format: int32
                                  type: integer
                                items:
                                  description: Items is a list of downward API volume
                                    file
                                  items:
                                    description: DownwardAPIVolumeFile represents
                                      information to create the file containing the
                                      pod field
                                    properties:
                                      fieldRef:
                                        description: 'Required: Selects a field of
                                          the pod: only annotations, labels, name
                                          and namespace are supported.'
                                        properties:
                                          apiVersion:
                                            description: Version of the schema the
                                              FieldPath is written in terms of, defaults
                                              to "v1".
                                            type: string
                                          fieldPath:
                                            description: Path of the field to select
                                              in the specified API version.
                                            type: string
                                        required:
                                        - fieldPath
                                        type: object
                                      mode:
                                        description: 'Optional: mode bits used to
                                          set permissions on this file, must be an
                                          octal value between 0000 and 0777 or a decimal
                                          value between 0 and 511. YAML accepts both
                                          octal and decimal values, JSON requires
                                          decimal values for mode bits. If not specified,
                                          the volume defaultMode will be used. This
                                          might be in conflict with other options
                                          that affect the file mode, like fsGroup,
                                          and the result can be other mode bits set.'
                                        format: int32
                                        type: integer
                                      path:
                                        description: 'Required: Path is  the relative
                                          path name of the file to be created. Must
                                          not be absolute or contain the ''..'' path.
                                          Must be utf-8 encoded. The first item of
                                          the relative path must not start with ''..'''
                                        type: string
                                      resourceFieldRef:
                                        description: 'Selects a resource of the container:
                                          only resources limits and requests (limits.cpu,
                                          limits.memory, requests.cpu and requests.memory)
                                          are currently supported.'
                                        properties:
                                          containerName:
                                            description: 'Container name: required
                                              for volumes, optional for env vars'
                                            type: string
                                          divisor:
                                            anyOf:
                                            - type: integer
                                            - type: string
                                            description: Specifies the output format
                                              of the exposed resources, defaults to
                                              "1"
                                            pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                            x-kubernetes-int-or-string: true
                                          resource:
                                            description: 'Required: resource to select'
                                            type: string
                                        required:
                                        - resource
                                        type: object
                                    required:
                                    - path
                                    type: object
                                  type: array
                              type: object
                            emptyDir:
                              description: 'EmptyDir represents a temporary directory
                                that shares a pod''s lifetime. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir'
                              properties:
                                medium:
                                  description: 'What type of storage medium should
                                    back this directory. The default is "" which means
                                    to use the node''s default medium. Must be an
                                    empty string (default) or Memory. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir'
                                  type: string
                                sizeLimit:
                                  anyOf:
                                  - type: integer
                                  - type: string
                                  description: 'Total amount of local storage required
                                    for this EmptyDir volume. The size limit is also
                                    applicable for memory medium. The maximum usage
                                    on memory medium EmptyDir would be the minimum
                                    value between the SizeLimit specified here and
                                    the sum of memory limits of all containers in
                                    a pod. The default is nil which means that the
                                    limit is undefined. More info: http://kubernetes.io/docs/user-guide/volumes#emptydir'
                                  pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                  x-kubernetes-int-or-string: true
                              type: object
                            ephemeral:
                              description: "Ephemeral represents a volume that is
                                handled by a cluster storage driver. The volume's
                                lifecycle is tied to the pod that defines it - it
                                will be created before the pod starts, and deleted
                                when the pod is removed. \n Use this if: a) the volume
                                is only needed while the pod runs, b) features of
                                normal volumes like restoring from snapshot or capacity
                                \   tracking are needed, c) the storage driver is
                                specified through a storage class, and d) the storage
                                driver supports dynamic volume provisioning through
                                \   a PersistentVolumeClaim (see EphemeralVolumeSource
                                for more    information on the connection between
                                this volume type    and PersistentVolumeClaim). \n
                                Use PersistentVolumeClaim or one of the vendor-specific
                                APIs for volumes that persist for longer than the
                                lifecycle of an individual pod. \n Use CSI for light-weight
                                local ephemeral volumes if the CSI driver is meant
                                to be used that way - see the documentation of the
                                driver for more information. \n A pod can use both
                                types of ephemeral volumes and persistent volumes
                                at the same time. \n This is a beta feature and only
                                available when the GenericEphemeralVolume feature
                                gate is enabled."
                              properties:
                                volumeClaimTemplate:
                                  description: "Will be used to create a stand-alone
                                    PVC to provision the volume. The pod in which
                                    this EphemeralVolumeSource is embedded will be
                                    the owner of the PVC, i.e. the PVC will be deleted
                                    together with the pod.  The name of the PVC will
                                    be `<pod name>-<volume name>` where `<volume name>`
                                    is the name from the `PodSpec.Volumes` array entry.
                                    Pod validation will reject the pod if the concatenated
                                    name is not valid for a PVC (for example, too
                                    long). \n An existing PVC with that name that
                                    is not owned by the pod will *not* be used for
                                    the pod to avoid using an unrelated volume by
                                    mistake. Starting the pod is then blocked until
                                    the unrelated PVC is removed. If such a pre-created
                                    PVC is meant to be used by the pod, the PVC has
                                    to updated with an owner reference to the pod
                                    once the pod exists. Normally this should not
                                    be necessary, but it may be useful when manually
                                    reconstructing a broken cluster. \n This field
                                    is read-only and no changes will be made by Kubernetes
                                    to the PVC after it has been created. \n Required,
                                    must not be nil."
                                  properties:
                                    metadata:
                                      description: May contain labels and annotations
                                        that will be copied into the PVC when creating
                                        it. No other fields are allowed and will be
                                        rejected during validation.
                                      type: object
                                    spec:
                                      description: The specification for the PersistentVolumeClaim.
                                        The entire content is copied unchanged into
                                        the PVC that gets created from this template.
                                        The same fields as in a PersistentVolumeClaim
                                        are also valid here.
                                      properties:
                                        accessModes:
                                          description: 'AccessModes contains the desired
                                            access modes the volume should have. More
                                            info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1'
                                          items:
                                            type: string
                                          type: array
                                        dataSource:
                                          description: 'This field can be used to
                                            specify either: * An existing VolumeSnapshot
                                            object (snapshot.storage.k8s.io/VolumeSnapshot)
                                            * An existing PVC (PersistentVolumeClaim)
                                            * An existing custom resource that implements
                                            data population (Alpha) In order to use
                                            custom resource types that implement data
                                            population, the AnyVolumeDataSource feature
                                            gate must be enabled. If the provisioner
                                            or an external controller can support
                                            the specified data source, it will create
                                            a new volume based on the contents of
                                            the specified data source.'
                                          properties:
                                            apiGroup:
                                              description: APIGroup is the group for
                                                the resource being referenced. If
                                                APIGroup is not specified, the specified
                                                Kind must be in the core API group.
                                                For any other third-party types, APIGroup
                                                is required.
                                              type: string
                                            kind:
                                              description: Kind is the type of resource
                                                being referenced
                                              type: string
                                            name:
                                              description: Name is the name of resource
                                                being referenced
                                              type: string
                                          required:
                                          - kind
                                          - name
                                          type: object
                                        resources:
                                          description: 'Resources represents the minimum
                                            resources the volume should have. More
                                            info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources'
                                          properties:
                                            limits:
                                              additionalProperties:
                                                anyOf:
                                                - type: integer
                                                - type: string
                                                pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                                x-kubernetes-int-or-string: true
                                              description: 'Limits describes the maximum
                                                amount of compute resources allowed.
                                                More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
                                              type: object
                                            requests:
                                              additionalProperties:
                                                anyOf:
                                                - type: integer
                                                - type: string
                                                pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                                x-kubernetes-int-or-string: true
                                              description: 'Requests describes the
                                                minimum amount of compute resources
                                                required. If Requests is omitted for
                                                a container, it defaults to Limits
                                                if that is explicitly specified, otherwise
                                                to an implementation-defined value.
                                                More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
                                              type: object
                                          type: object
                                        selector:
                                          description: A label query over volumes
                                            to consider for binding.
                                          properties:
                                            matchExpressions:
                                              description: matchExpressions is a list
                                                of label selector requirements. The
                                                requirements are ANDed.
                                              items:
                                                description: A label selector requirement
                                                  is a selector that contains values,
                                                  a key, and an operator that relates
                                                  the key and values.
                                                properties:
                                                  key:
                                                    description: key is the label
                                                      key that the selector applies
                                                      to.
                                                    type: string
                                                  operator:
                                                    description: operator represents
                                                      a key's relationship to a set
                                                      of values. Valid operators are
                                                      In, NotIn, Exists and DoesNotExist.
                                                    type: string
                                                  values:
                                                    description: values is an array
                                                      of string values. If the operator
                                                      is In or NotIn, the values array
                                                      must be non-empty. If the operator
                                                      is Exists or DoesNotExist, the
                                                      values array must be empty.
                                                      This array is replaced during
                                                      a strategic merge patch.
                                                    items:
                                                      type: string
                                                    type: array
                                                required:
                                                - key
                                                - operator
                                                type: object
                                              type: array
                                            matchLabels:
                                              additionalProperties:
                                                type: string
                                              description: matchLabels is a map of
                                                {key,value} pairs. A single {key,value}
                                                in the matchLabels map is equivalent
                                                to an element of matchExpressions,
                                                whose key field is "key", the operator
                                                is "In", and the values array contains
                                                only "value". The requirements are
                                                ANDed.
                                              type: object
                                          type: object
                                        storageClassName:
                                          description: 'Name of the StorageClass required
                                            by the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1'
                                          type: string
                                        volumeMode:
                                          description: volumeMode defines what type
                                            of volume is required by the claim. Value
                                            of Filesystem is implied when not included
                                            in claim spec.
                                          type: string
                                        volumeName:
                                          description: VolumeName is the binding reference
                                            to the PersistentVolume backing this claim.
                                          type: string
                                      type: object
                                  required:
                                  - spec
                                  type: object
                              type: object
                            fc:
                              description: FC represents a Fibre Channel resource
                                that is attached to a kubelet's host machine and then
                                exposed to the pod.
                              properties:
                                fsType:
                                  description: 'Filesystem type to mount. Must be
                                    a filesystem type supported by the host operating
                                    system. Ex. "ext4", "xfs", "ntfs". Implicitly
                                    inferred to be "ext4" if unspecified. TODO: how
                                    do we prevent errors in the filesystem from compromising
                                    the machine'
                                  type: string
                                lun:
                                  description: 'Optional: FC target lun number'
                                  format: int32
                                  type: integer
                                readOnly:
                                  description: 'Optional: Defaults to false (read/write).
                                    ReadOnly here will force the ReadOnly setting
                                    in VolumeMounts.'
                                  type: boolean
                                targetWWNs:
                                  description: 'Optional: FC target worldwide names
                                    (WWNs)'
                                  items:
                                    type: string
                                  type: array
                                wwids:
                                  description: 'Optional: FC volume world wide identifiers
                                    (wwids) Either wwids or combination of targetWWNs
                                    and lun must be set, but not both simultaneously.'
                                  items:
                                    type: string
                                  type: array
                              type: object
                            flexVolume:
                              description: FlexVolume represents a generic volume
                                resource that is provisioned/attached using an exec
                                based plugin.
                              properties:
                                driver:
                                  description: Driver is the name of the driver to
                                    use for this volume.
                                  type: string
                                fsType:
                                  description: Filesystem type to mount. Must be a
                                    filesystem type supported by the host operating
                                    system. Ex. "ext4", "xfs", "ntfs". The default
                                    filesystem depends on FlexVolume script.
                                  type: string
                                options:
                                  additionalProperties:
                                    type: string
                                  description: 'Optional: Extra command options if
                                    any.'
                                  type: object
                                readOnly:
                                  description: 'Optional: Defaults to false (read/write).
                                    ReadOnly here will force the ReadOnly setting
                                    in VolumeMounts.'
                                  type: boolean
                                secretRef:
                                  description: 'Optional: SecretRef is reference to
                                    the secret object containing sensitive information
                                    to pass to the plugin scripts. This may be empty
                                    if no secret object is specified. If the secret
                                    object contains more than one secret, all secrets
                                    are passed to the plugin scripts.'
                                  properties:
                                    name:
                                      description: 'Name of the referent. More info:
                                        https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                        TODO: Add other useful fields. apiVersion,
                                        kind, uid?'
                                      type: string
                                  type: object
                              required:
                              - driver
                              type: object
                            flocker:
                              description: Flocker represents a Flocker volume attached
                                to a kubelet's host machine. This depends on the Flocker
                                control service being running
                              properties:
                                datasetName:
                                  description: Name of the dataset stored as metadata
                                    -> name on the dataset for Flocker should be considered
                                    as deprecated
                                  type: string
                                datasetUUID:
                                  description: UUID of the dataset. This is unique
                                    identifier of a Flocker dataset
                                  type: string
                              type: object
                            gcePersistentDisk:
                              description: 'GCEPersistentDisk represents a GCE Disk
                                resource that is attached to a kubelet''s host machine
                                and then exposed to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk'
                              properties:
                                fsType:
                                  description: 'Filesystem type of the volume that
                                    you want to mount. Tip: Ensure that the filesystem
                                    type is supported by the host operating system.
                                    Examples: "ext4", "xfs", "ntfs". Implicitly inferred
                                    to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
                                    TODO: how do we prevent errors in the filesystem
                                    from compromising the machine'
                                  type: string
                                partition:
                                  description: 'The partition in the volume that you
                                    want to mount. If omitted, the default is to mount
                                    by volume name. Examples: For volume /dev/sda1,
                                    you specify the partition as "1". Similarly, the
                                    volume partition for /dev/sda is "0" (or you can
                                    leave the property empty). More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk'
                                  format: int32
                                  type: integer
                                pdName:
                                  description: 'Unique name of the PD resource in
                                    GCE. Used to identify the disk in GCE. More info:
                                    https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk'
                                  type: string
                                readOnly:
                                  description: 'ReadOnly here will force the ReadOnly
                                    setting in VolumeMounts. Defaults to false. More
                                    info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk'
                                  type: boolean
                              required:
                              - pdName
                              type: object
                            gitRepo:
                              description: 'GitRepo represents a git repository at
                                a particular revision. DEPRECATED: GitRepo is deprecated.
                                To provision a container with a git repo, mount an
                                EmptyDir into an InitContainer that clones the repo
                                using git, then mount the EmptyDir into the Pod''s
                                container.'
                              properties:
                                directory:
                                  description: Target directory name. Must not contain
                                    or start with '..'.  If '.' is supplied, the volume
                                    directory will be the git repository.  Otherwise,
                                    if specified, the volume will contain the git
                                    repository in the subdirectory with the given
                                    name.
                                  type: string
                                repository:
                                  description: Repository URL
                                  type: string
                                revision:
                                  description: Commit hash for the specified revision.
                                  type: string
                              required:
                              - repository
                              type: object
                            glusterfs:
                              description: 'Glusterfs represents a Glusterfs mount
                                on the host that shares a pod''s lifetime. More info:
                                https://examples.k8s.io/volumes/glusterfs/README.md'
                              properties:
                                endpoints:
                                  description: 'EndpointsName is the endpoint name
                                    that details Glusterfs topology. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod'
                                  type: string
                                path:
                                  description: 'Path is the Glusterfs volume path.
                                    More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod'
                                  type: string
                                readOnly:
                                  description: 'ReadOnly here will force the Glusterfs
                                    volume to be mounted with read-only permissions.
                                    Defaults to false. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod'
                                  type: boolean
                              required:
                              - endpoints
                              - path
                              type: object
                            hostPath:
                              description: 'HostPath represents a pre-existing file
                                or directory on the host machine that is directly
                                exposed to the container. This is generally used for
                                system agents or other privileged things that are
                                allowed to see the host machine. Most containers will
                                NOT need this. More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath
                                --- TODO(jonesdl) We need to restrict who can use
                                host directory mounts and who can/can not mount host
                                directories as read/write.'
                              properties:
                                path:
                                  description: 'Path of the directory on the host.
                                    If the path is a symlink, it will follow the link
                                    to the real path. More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath'
                                  type: string
                                type:
                                  description: 'Type for HostPath Volume Defaults
                                    to "" More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath'
                                  type: string
                              required:
                              - path
                              type: object
                            iscsi:
                              description: 'ISCSI represents an ISCSI Disk resource
                                that is attached to a kubelet''s host machine and
                                then exposed to the pod. More info: https://examples.k8s.io/volumes/iscsi/README.md'
                              properties:
                                chapAuthDiscovery:
                                  description: whether support iSCSI Discovery CHAP
                                    authentication
                                  type: boolean
                                chapAuthSession:
                                  description: whether support iSCSI Session CHAP
                                    authentication
                                  type: boolean
                                fsType:
                                  description: 'Filesystem type of the volume that
                                    you want to mount. Tip: Ensure that the filesystem
                                    type is supported by the host operating system.
                                    Examples: "ext4", "xfs", "ntfs". Implicitly inferred
                                    to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#iscsi
                                    TODO: how do we prevent errors in the filesystem
                                    from compromising the machine'
                                  type: string
                                initiatorName:
                                  description: Custom iSCSI Initiator Name. If initiatorName
                                    is specified with iscsiInterface simultaneously,
                                    new iSCSI interface <target portal>:<volume name>
                                    will be created for the connection.
                                  type: string
                                iqn:
                                  description: Target iSCSI Qualified Name.
                                  type: string
                                iscsiInterface:
                                  description: iSCSI Interface Name that uses an iSCSI
                                    transport. Defaults to 'default' (tcp).
                                  type: string
                                lun:
                                  description: iSCSI Target Lun number.
                                  format: int32
                                  type: integer
                                portals:
                                  description: iSCSI Target Portal List. The portal
                                    is either an IP or ip_addr:port if the port is
                                    other than default (typically TCP ports 860 and
                                    3260).
                                  items:
                                    type: string
                                  type: array
                                readOnly:
                                  description: ReadOnly here will force the ReadOnly
                                    setting in VolumeMounts. Defaults to false.
                                  type: boolean
                                secretRef:
                                  description: CHAP Secret for iSCSI target and initiator
                                    authentication
                                  properties:
                                    name:
                                      description: 'Name of the referent. More info:
                                        https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                        TODO: Add other useful fields. apiVersion,
                                        kind, uid?'
                                      type: string
                                  type: object
                                targetPortal:
                                  description: iSCSI Target Portal. The Portal is
                                    either an IP or ip_addr:port if the port is other
                                    than default (typically TCP ports 860 and 3260).
                                  type: string
                              required:
                              - iqn
                              - lun
                              - targetPortal
                              type: object
                            name:
                              description: 'Volume''s name. Must be a DNS_LABEL and
                                unique within the pod. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
                              type: string
                            nfs:
                              description: 'NFS represents an NFS mount on the host
                                that shares a pod''s lifetime More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs'
                              properties:
                                path:
                                  description: 'Path that is exported by the NFS server.
                                    More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs'
                                  type: string
                                readOnly:
                                  description: 'ReadOnly here will force the NFS export
                                    to be mounted with read-only permissions. Defaults
                                    to false. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs'
                                  type: boolean
                                server:
                                  description: 'Server is the hostname or IP address
                                    of the NFS server. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs'
                                  type: string
                              required:
                              - path
                              - server
                              type: object
                            persistentVolumeClaim:
                              description: 'PersistentVolumeClaimVolumeSource represents
                                a reference to a PersistentVolumeClaim in the same
                                namespace. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
                              properties:
                                claimName:
                                  description: 'ClaimName is the name of a PersistentVolumeClaim
                                    in the same namespace as the pod using this volume.
                                    More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
                                  type: string
                                readOnly:
                                  description: Will force the ReadOnly setting in
                                    VolumeMounts. Default false.
                                  type: boolean
                              required:
                              - claimName
                              type: object
                            photonPersistentDisk:
                              description: PhotonPersistentDisk represents a PhotonController
                                persistent disk attached and mounted on kubelets host
                                machine
                              properties:
                                fsType:
                                  description: Filesystem type to mount. Must be a
                                    filesystem type supported by the host operating
                                    system. Ex. "ext4", "xfs", "ntfs". Implicitly
                                    inferred to be "ext4" if unspecified.
                                  type: string
                                pdID:
                                  description: ID that identifies Photon Controller
                                    persistent disk
                                  type: string
                              required:
                              - pdID
                              type: object
                            portworxVolume:
                              description: PortworxVolume represents a portworx volume
                                attached and mounted on kubelets host machine
                              properties:
                                fsType:
                                  description: FSType represents the filesystem type
                                    to mount Must be a filesystem type supported by
                                    the host operating system. Ex. "ext4", "xfs".
                                    Implicitly inferred to be "ext4" if unspecified.
                                  type: string
                                readOnly:
                                  description: Defaults to false (read/write). ReadOnly
                                    here will force the ReadOnly setting in VolumeMounts.
                                  type: boolean
                                volumeID:
                                  description: VolumeID uniquely identifies a Portworx
                                    volume
                                  type: string
                              required:
                              - volumeID
                              type: object
                            projected:
                              description: Items for all in one resources secrets,
                                configmaps, and downward API
                              properties:
                                defaultMode:
                                  description: Mode bits used to set permissions on
                                    created files by default. Must be an octal value
                                    between 0000 and 0777 or a decimal value between
                                    0 and 511. YAML accepts both octal and decimal
                                    values, JSON requires decimal values for mode
                                    bits. Directories within the path are not affected
                                    by this setting. This might be in conflict with
                                    other options that affect the file mode, like
                                    fsGroup, and the result can be other mode bits
                                    set.
                                  format: int32
                                  type: integer
                                sources:
                                  description: list of volume projections
                                  items:
                                    description: Projection that may be projected
                                      along with other supported volume types
                                    properties:
                                      configMap:
                                        description: information about the configMap
                                          data to project
                                        properties:
                                          items:
                                            description: If unspecified, each key-value
                                              pair in the Data field of the referenced
                                              ConfigMap will be projected into the
                                              volume as a file whose name is the key
                                              and content is the value. If specified,
                                              the listed keys will be projected into
                                              the specified paths, and unlisted keys
                                              will not be present. If a key is specified
                                              which is not present in the ConfigMap,
                                              the volume setup will error unless it
                                              is marked optional. Paths must be relative
                                              and may not contain the '..' path or
                                              start with '..'.
                                            items:
                                              description: Maps a string key to a
                                                path within a volume.
                                              properties:
                                                key:
                                                  description: The key to project.
                                                  type: string
                                                mode:
                                                  description: 'Optional: mode bits
                                                    used to set permissions on this
                                                    file. Must be an octal value between
                                                    0000 and 0777 or a decimal value
                                                    between 0 and 511. YAML accepts
                                                    both octal and decimal values,
                                                    JSON requires decimal values for
                                                    mode bits. If not specified, the
                                                    volume defaultMode will be used.
                                                    This might be in conflict with
                                                    other options that affect the
                                                    file mode, like fsGroup, and the
                                                    result can be other mode bits
                                                    set.'
                                                  format: int32
                                                  type: integer
                                                path:
                                                  description: The relative path of
                                                    the file to map the key to. May
                                                    not be an absolute path. May not
                                                    contain the path element '..'.
                                                    May not start with the string
                                                    '..'.
                                                  type: string
                                              required:
                                              - key
                                              - path
                                              type: object
                                            type: array
                                          name:
                                            description: 'Name of the referent. More
                                              info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                              TODO: Add other useful fields. apiVersion,
                                              kind, uid?'
                                            type: string
                                          optional:
                                            description: Specify whether the ConfigMap
                                              or its keys must be defined
                                            type: boolean
                                        type: object
                                      downwardAPI:
                                        description: information about the downwardAPI
                                          data to project
                                        properties:
                                          items:
                                            description: Items is a list of DownwardAPIVolume
                                              file
                                            items:
                                              description: DownwardAPIVolumeFile represents
                                                information to create the file containing
                                                the pod field
                                              properties:
                                                fieldRef:
                                                  description: 'Required: Selects
                                                    a field of the pod: only annotations,
                                                    labels, name and namespace are
                                                    supported.'
                                                  properties:
                                                    apiVersion:
                                                      description: Version of the
                                                        schema the FieldPath is written
                                                        in terms of, defaults to "v1".
                                                      type: string
                                                    fieldPath:
                                                      description: Path of the field
                                                        to select in the specified
                                                        API version.
                                                      type: string
                                                  required:
                                                  - fieldPath
                                                  type: object
                                                mode:
                                                  description: 'Optional: mode bits
                                                    used to set permissions on this
                                                    file, must be an octal value between
                                                    0000 and 0777 or a decimal value
                                                    between 0 and 511. YAML accepts
                                                    both octal and decimal values,
                                                    JSON requires decimal values for
                                                    mode bits. If not specified, the
                                                    volume defaultMode will be used.
                                                    This might be in conflict with
                                                    other options that affect the
                                                    file mode, like fsGroup, and the
                                                    result can be other mode bits
                                                    set.'
                                                  format: int32
                                                  type: integer
                                                path:
                                                  description: 'Required: Path is  the
                                                    relative path name of the file
                                                    to be created. Must not be absolute
                                                    or contain the ''..'' path. Must
                                                    be utf-8 encoded. The first item
                                                    of the relative path must not
                                                    start with ''..'''
                                                  type: string
                                                resourceFieldRef:
                                                  description: 'Selects a resource
                                                    of the container: only resources
                                                    limits and requests (limits.cpu,
                                                    limits.memory, requests.cpu and
                                                    requests.memory) are currently
                                                    supported.'
                                                  properties:
                                                    containerName:
                                                      description: 'Container name:
                                                        required for volumes, optional
                                                        for env vars'
                                                      type: string
                                                    divisor:
                                                      anyOf:
                                                      - type: integer
                                                      - type: string
                                                      description: Specifies the output
                                                        format of the exposed resources,
                                                        defaults to "1"
                                                      pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
                                                      x-kubernetes-int-or-string: true
                                                    resource:
                                                      description: 'Required: resource
                                                        to select'
                                                      type: string
                                                  required:
                                                  - resource
                                                  type: object
                                              required:
                                              - path
                                              type: object
                                            type: array
                                        type: object
                                      secret:
                                        description: information about the secret
                                          data to project
                                        properties:
                                          items:
                                            description: If unspecified, each key-value
                                              pair in the Data field of the referenced
                                              Secret will be projected into the volume
                                              as a file whose name is the key and
                                              content is the value. If specified,
                                              the listed keys will be projected into
                                              the specified paths, and unlisted keys
                                              will not be present. If a key is specified
                                              which is not present in the Secret,
                                              the volume setup will error unless it
                                              is marked optional. Paths must be relative
                                              and may not contain the '..' path or
                                              start with '..'.
                                            items:
                                              description: Maps a string key to a
                                                path within a volume.
                                              properties:
                                                key:
                                                  description: The key to project.
                                                  type: string
                                                mode:
                                                  description: 'Optional: mode bits
                                                    used to set permissions on this
                                                    file. Must be an octal value between
                                                    0000 and 0777 or a decimal value
                                                    between 0 and 511. YAML accepts
                                                    both octal and decimal values,
                                                    JSON requires decimal values for
                                                    mode bits. If not specified, the
                                                    volume defaultMode will be used.
                                                    This might be in conflict with
                                                    other options that affect the
                                                    file mode, like fsGroup, and the
                                                    result can be other mode bits
                                                    set.'
                                                  format: int32
                                                  type: integer
                                                path:
                                                  description: The relative path of
                                                    the file to map the key to. May
                                                    not be an absolute path. May not
                                                    contain the path element '..'.
                                                    May not start with the string
                                                    '..'.
                                                  type: string
                                              required:
                                              - key
                                              - path
                                              type: object
                                            type: array
                                          name:
                                            description: 'Name of the referent. More
                                              info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                              TODO: Add other useful fields. apiVersion,
                                              kind, uid?'
                                            type: string
                                          optional:
                                            description: Specify whether the Secret
                                              or its key must be defined
                                            type: boolean
                                        type: object
                                      serviceAccountToken:
                                        description: information about the serviceAccountToken
                                          data to project
                                        properties:
                                          audience:
                                            description: Audience is the intended
                                              audience of the token. A recipient of
                                              a token must identify itself with an
                                              identifier specified in the audience
                                              of the token, and otherwise should reject
                                              the token. The audience defaults to
                                              the identifier of the apiserver.
                                            type: string
                                          expirationSeconds:
                                            description: ExpirationSeconds is the
                                              requested duration of validity of the
                                              service account token. As the token
                                              approaches expiration, the kubelet volume
                                              plugin will proactively rotate the service
                                              account token. The kubelet will start
                                              trying to rotate the token if the token
                                              is older than 80 percent of its time
                                              to live or if the token is older than
                                              24 hours.Defaults to 1 hour and must
                                              be at least 10 minutes.
                                            format: int64
                                            type: integer
                                          path:
                                            description: Path is the path relative
                                              to the mount point of the file to project
                                              the token into.
                                            type: string
                                        required:
                                        - path
                                        type: object
                                    type: object
                                  type: array
                              type: object
                            quobyte:
                              description: Quobyte represents a Quobyte mount on the
                                host that shares a pod's lifetime
                              properties:
                                group:
                                  description: Group to map volume access to Default
                                    is no group
                                  type: string
                                readOnly:
                                  description: ReadOnly here will force the Quobyte
                                    volume to be mounted with read-only permissions.
                                    Defaults to false.
                                  type: boolean
                                registry:
                                  description: Registry represents a single or multiple
                                    Quobyte Registry services specified as a string
                                    as host:port pair (multiple entries are separated
                                    with commas) which acts as the central registry
                                    for volumes
                                  type: string
                                tenant:
                                  description: Tenant owning the given Quobyte volume
                                    in the Backend Used with dynamically provisioned
                                    Quobyte volumes, value is set by the plugin
                                  type: string
                                user:
                                  description: User to map volume access to Defaults
                                    to serivceaccount user
                                  type: string
                                volume:
                                  description: Volume is a string that references
                                    an already created Quobyte volume by name.
                                  type: string
                              required:
                              - registry
                              - volume
                              type: object
                            rbd:
                              description: 'RBD represents a Rados Block Device mount
                                on the host that shares a pod''s lifetime. More info:
                                https://examples.k8s.io/volumes/rbd/README.md'
                              properties:
                                fsType:
                                  description: 'Filesystem type of the volume that
                                    you want to mount. Tip: Ensure that the filesystem
                                    type is supported by the host operating system.
                                    Examples: "ext4", "xfs", "ntfs". Implicitly inferred
                                    to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#rbd
                                    TODO: how do we prevent errors in the filesystem
                                    from compromising the machine'
                                  type: string
                                image:
                                  description: 'The rados image name. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
                                  type: string
                                keyring:
                                  description: 'Keyring is the path to key ring for
                                    RBDUser. Default is /etc/ceph/keyring. More info:
                                    https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
                                  type: string
                                monitors:
                                  description: 'A collection of Ceph monitors. More
                                    info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
                                  items:
                                    type: string
                                  type: array
                                pool:
                                  description: 'The rados pool name. Default is rbd.
                                    More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
                                  type: string
                                readOnly:
                                  description: 'ReadOnly here will force the ReadOnly
                                    setting in VolumeMounts. Defaults to false. More
                                    info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
                                  type: boolean
                                secretRef:
                                  description: 'SecretRef is name of the authentication
                                    secret for RBDUser. If provided overrides keyring.
                                    Default is nil. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
                                  properties:
                                    name:
                                      description: 'Name of the referent. More info:
                                        https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                        TODO: Add other useful fields. apiVersion,
                                        kind, uid?'
                                      type: string
                                  type: object
                                user:
                                  description: 'The rados user name. Default is admin.
                                    More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
                                  type: string
                              required:
                              - image
                              - monitors
                              type: object
                            scaleIO:
                              description: ScaleIO represents a ScaleIO persistent
                                volume attached and mounted on Kubernetes nodes.
                              properties:
                                fsType:
                                  description: Filesystem type to mount. Must be a
                                    filesystem type supported by the host operating
                                    system. Ex. "ext4", "xfs", "ntfs". Default is
                                    "xfs".
                                  type: string
                                gateway:
                                  description: The host address of the ScaleIO API
                                    Gateway.
                                  type: string
                                protectionDomain:
                                  description: The name of the ScaleIO Protection
                                    Domain for the configured storage.
                                  type: string
                                readOnly:
                                  description: Defaults to false (read/write). ReadOnly
                                    here will force the ReadOnly setting in VolumeMounts.
                                  type: boolean
                                secretRef:
                                  description: SecretRef references to the secret
                                    for ScaleIO user and other sensitive information.
                                    If this is not provided, Login operation will
                                    fail.
                                  properties:
                                    name:
                                      description: 'Name of the referent. More info:
                                        https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                        TODO: Add other useful fields. apiVersion,
                                        kind, uid?'
                                      type: string
                                  type: object
                                sslEnabled:
                                  description: Flag to enable/disable SSL communication
                                    with Gateway, default false
                                  type: boolean
                                storageMode:
                                  description: Indicates whether the storage for a
                                    volume should be ThickProvisioned or ThinProvisioned.
                                    Default is ThinProvisioned.
                                  type: string
                                storagePool:
                                  description: The ScaleIO Storage Pool associated
                                    with the protection domain.
                                  type: string
                                system:
                                  description: The name of the storage system as configured
                                    in ScaleIO.
                                  type: string
                                volumeName:
                                  description: The name of a volume already created
                                    in the ScaleIO system that is associated with
                                    this volume source.
                                  type: string
                              required:
                              - gateway
                              - secretRef
                              - system
                              type: object
                            secret:
                              description: 'Secret represents a secret that should
                                populate this volume. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret'
                              properties:
                                defaultMode:
                                  description: 'Optional: mode bits used to set permissions
                                    on created files by default. Must be an octal
                                    value between 0000 and 0777 or a decimal value
                                    between 0 and 511. YAML accepts both octal and
                                    decimal values, JSON requires decimal values for
                                    mode bits. Defaults to 0644. Directories within
                                    the path are not affected by this setting. This
                                    might be in conflict with other options that affect
                                    the file mode, like fsGroup, and the result can
                                    be other mode bits set.'
                                  format: int32
                                  type: integer
                                items:
                                  description: If unspecified, each key-value pair
                                    in the Data field of the referenced Secret will
                                    be projected into the volume as a file whose name
                                    is the key and content is the value. If specified,
                                    the listed keys will be projected into the specified
                                    paths, and unlisted keys will not be present.
                                    If a key is specified which is not present in
                                    the Secret, the volume setup will error unless
                                    it is marked optional. Paths must be relative
                                    and may not contain the '..' path or start with
                                    '..'.
                                  items:
                                    description: Maps a string key to a path within
                                      a volume.
                                    properties:
                                      key:
                                        description: The key to project.
                                        type: string
                                      mode:
                                        description: 'Optional: mode bits used to
                                          set permissions on this file. Must be an
                                          octal value between 0000 and 0777 or a decimal
                                          value between 0 and 511. YAML accepts both
                                          octal and decimal values, JSON requires
                                          decimal values for mode bits. If not specified,
                                          the volume defaultMode will be used. This
                                          might be in conflict with other options
                                          that affect the file mode, like fsGroup,
                                          and the result can be other mode bits set.'
                                        format: int32
                                        type: integer
                                      path:
                                        description: The relative path of the file
                                          to map the key to. May not be an absolute
                                          path. May not contain the path element '..'.
                                          May not start with the string '..'.
                                        type: string
                                    required:
                                    - key
                                    - path
                                    type: object
                                  type: array
                                optional:
                                  description: Specify whether the Secret or its keys
                                    must be defined
                                  type: boolean
                                secretName:
                                  description: 'Name of the secret in the pod''s namespace
                                    to use. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret'
                                  type: string
                              type: object
                            storageos:
                              description: StorageOS represents a StorageOS volume
                                attached and mounted on Kubernetes nodes.
                              properties:
                                fsType:
                                  description: Filesystem type to mount. Must be a
                                    filesystem type supported by the host operating
                                    system. Ex. "ext4", "xfs", "ntfs". Implicitly
                                    inferred to be "ext4" if unspecified.
                                  type: string
                                readOnly:
                                  description: Defaults to false (read/write). ReadOnly
                                    here will force the ReadOnly setting in VolumeMounts.
                                  type: boolean
                                secretRef:
                                  description: SecretRef specifies the secret to use
                                    for obtaining the StorageOS API credentials.  If
                                    not specified, default values will be attempted.
                                  properties:
                                    name:
                                      description: 'Name of the referent. More info:
                                        https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                        TODO: Add other useful fields. apiVersion,
                                        kind, uid?'
                                      type: string
                                  type: object
                                volumeName:
                                  description: VolumeName is the human-readable name
                                    of the StorageOS volume.  Volume names are only
                                    unique within a namespace.
                                  type: string
                                volumeNamespace:
                                  description: VolumeNamespace specifies the scope
                                    of the volume within StorageOS.  If no namespace
                                    is specified then the Pod's namespace will be
                                    used.  This allows the Kubernetes name scoping
                                    to be mirrored within StorageOS for tighter integration.
                                    Set VolumeName to any name to override the default
                                    behaviour. Set to "default" if you are not using
                                    namespaces within StorageOS. Namespaces that do
                                    not pre-exist within StorageOS will be created.
                                  type: string
                              type: object
                            vsphereVolume:
                              description: VsphereVolume represents a vSphere volume
                                attached and mounted on kubelets host machine
                              properties:
                                fsType:
                                  description: Filesystem type to mount. Must be a
                                    filesystem type supported by the host operating
                                    system. Ex. "ext4", "xfs", "ntfs". Implicitly
                                    inferred to be "ext4" if unspecified.
                                  type: string
                                storagePolicyID:
                                  description: Storage Policy Based Management (SPBM)
                                    profile ID associated with the StoragePolicyName.
                                  type: string
                                storagePolicyName:
                                  description: Storage Policy Based Management (SPBM)
                                    profile name.
                                  type: string
                                volumePath:
                                  description: Path that identifies vSphere volume
                                    vmdk
                                  type: string
                              required:
                              - volumePath
                              type: object
                          required:
                          - name
                          type: object
                        type: array
                    required:
                    - containers
                    type: object
                type: object
              ttlSecondsAfterFinished:
                description: ttlSecondsAfterFinished limits the lifetime of a Job
                  that has finished execution (either Complete or Failed). If this
                  field is set, ttlSecondsAfterFinished after the Job finishes, it
                  is eligible to be automatically deleted. When the Job is being deleted,
                  its lifecycle guarantees (e.g. finalizers) will be honored. If this
                  field is unset, the Job won't be automatically deleted. If this
                  field is set to zero, the Job becomes eligible to be deleted immediately
                  after it finishes. This field is alpha-level and is only honored
                  by servers that enable the TTLAfterFinished feature.
                format: int32
                type: integer
            required:
            - model
            - template
            type: object
          status:
            description: VideoAnalyticsJobStatus represents the current state of a
              videoanalytics job
            properties:
              active:
                description: The number of actively running pods.
                format: int32
                type: integer
              completionTime:
                description: Represents time when the job was completed. It is not
                  guaranteed to be set in happens-before order across separate operations.
                  It is represented in RFC3339 form and is in UTC.
                format: date-time
                type: string
              conditions:
                description: The latest available observations of a videoanalytics
                  job's current state.
                items:
                  description: VideoAnalyticsJobCondition describes current state
                    of a job. see https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#typical-status-properties
                    for details.
                  properties:
                    data:
                      description: The json data related to this condition
                      type: string
                    lastHeartbeatTime:
                      description: last time we got an update on a given condition
                      format: date-time
                      type: string
                    lastTransitionTime:
                      description: Last time the condition transit from one status
                        to another.
                      format: date-time
                      type: string
                    message:
                      description: Human readable message indicating details about
                        last transition.
                      type: string
                    reason:
                      description: (brief) reason for the condition's last transition.
                      type: string
                    status:
                      description: Status of the condition, one of True, False, Unknown.
                      type: string
                    type:
                      description: Type of job condition, Complete or Failed.
                      type: string
                  required:
                  - status
                  - type
                  type: object
                type: array
              failed:
                description: The number of pods which reached phase Failed.
                format: int32
                type: integer
              phase:
                description: The phase of the videoanalytics job.
                type: string
              startTime:
                description: Represents time when the job was acknowledged by the
                  job controller. It is not guaranteed to be set in happens-before
                  order across separate operations. It is represented in RFC3339 form
                  and is in UTC.
                format: date-time
                type: string
              succeeded:
                description: The number of pods which reached phase Succeeded.
                format: int32
                type: integer
            type: object
        required:
        - metadata
        - spec
        type: object
    served: true
    storage: true
    subresources:
      status: {}
status:
  acceptedNames:
    kind: ""
    plural: ""
  conditions: []
  storedVersions: []