Skip to content

Latest commit

 

History

History
344 lines (286 loc) · 11.1 KB

cisco.nxos.nxos_hsrp_interfaces_module.rst

File metadata and controls

344 lines (286 loc) · 11.1 KB

cisco.nxos.nxos_hsrp_interfaces

HSRP interfaces resource module

Version added: 1.0.0

  • Manages Hot Standby Router Protocol (HSRP) interface attributes.
Parameter Choices/Defaults Comments
config
list / elements=dictionary
The provided configuration
bfd
string
    Choices:
  • enable
  • disable
Enable/Disable HSRP Bidirectional Forwarding Detection (BFD) on the interface.
name
string
The name of the interface.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the NX-OS device by executing the command show running-config | section '^interface'.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • gathered
  • rendered
  • parsed
The state the configuration should be left in

Note

  • Tested against NX-OS 7.0(3)I5(1).
  • Feature bfd should be enabled for this module.
  • Unsupported for Cisco MDS
# Using deleted

- name: Configure hsrp attributes on interfaces
  cisco.nxos.nxos_hsrp_interfaces:
    config:
      - name: Ethernet1/1
      - name: Ethernet1/2
    operation: deleted


# Using merged

- name: Configure hsrp attributes on interfaces
  cisco.nxos.nxos_hsrp_interfaces:
    config:
      - name: Ethernet1/1
        bfd: enable
      - name: Ethernet1/2
        bfd: disable
    operation: merged


# Using overridden

- name: Configure hsrp attributes on interfaces
  cisco.nxos.nxos_hsrp_interfaces:
    config:
      - name: Ethernet1/1
        bfd: enable
      - name: Ethernet1/2
        bfd: disable
    operation: overridden


# Using replaced

- name: Configure hsrp attributes on interfaces
  cisco.nxos.nxos_hsrp_interfaces:
    config:
      - name: Ethernet1/1
        bfd: enable
      - name: Ethernet1/2
        bfd: disable
    operation: replaced

# Using rendered

- name: Use rendered state to convert task input to device specific commands
  cisco.nxos.nxos_hsrp_interfaces:
    config:
      - name: Ethernet1/800
        bfd: enable
      - name: Ethernet1/801
        bfd: enable
    state: rendered

# Task Output (redacted)
# -----------------------

# rendered:
#   - "interface Ethernet1/800"
#   - "hsrp bfd"
#   - "interface Ethernet1/801"
#   - "hsrp bfd"

# Using parsed

# parsed.cfg
# ------------
# interface Ethernet1/800
#   no switchport
#   hsrp bfd
# interface Ethernet1/801
#   no switchport
#   hsrp bfd

- name: Use parsed state to convert externally supplied config to structured format
  cisco.nxos.nxos_hsrp_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task output (redacted)
# -----------------------

# parsed:
#   - name: Ethernet1/800
#     bfd: enable
#   - name: Ethernet1/801
#     bfd: enable

# Using gathered

# Existing device config state
# -------------------------------

# interface Ethernet1/1
#   no switchport
#   hsrp bfd
# interface Ethernet1/2
#   no switchport
#   hsrp bfd
# interface Ethernet1/3
#   no switchport

- name: Gather hsrp_interfaces facts from the device using nxos_hsrp_interfaces
  cisco.nxos.nxos_hsrp_interfaces:
    state: gathered

# Task output (redacted)
# -----------------------

# gathered:
#   - name: Ethernet1/1
#     bfd: enable
#   - name: Ethernet1/2
#     bfd: enable

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list
when changed
The resulting configuration model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list
always
The configuration prior to the model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
['interface Ethernet1/1', 'hsrp bfd']


Authors

  • Chris Van Heuveln (@chrisvanheuveln)