Skip to content

Latest commit

 

History

History
332 lines (300 loc) · 14 KB

cisco.nxos.nxos_vxlan_vtep_module.rst

File metadata and controls

332 lines (300 loc) · 14 KB

cisco.nxos.nxos_vxlan_vtep

Manages VXLAN Network Virtualization Endpoint (NVE).

Version added: 1.0.0

  • Manages VXLAN Network Virtualization Endpoint (NVE) overlay interface that terminates VXLAN tunnels.
Parameter Choices/Defaults Comments
advertise_virtual_rmac
boolean
    Choices:
  • no
  • yes
The advertise_virtual_rmac parameter lets BGP to use the VMAC with VIP as next-hop when advertising type-2 routes. Should be used together with advertise_pip parameter from cisco.nxos.nxos_bgp_address_family module.
description
string
Description of the NVE interface.
global_ingress_replication_bgp
boolean
    Choices:
  • no
  • yes
Configures ingress replication protocol as bgp for all VNIs. This is available on Nexus 9000 series switches running NX-OS software release 9.2(x) or higher.
global_mcast_group_L2
string
Global multicast IP prefix for L2 VNIs or the keyword 'default'. This is available on Nexus 9000 series switches running NX-OS software release 9.2(x) or higher.
global_mcast_group_L3
string
Global multicast IP prefix for L3 VNIs or the keyword 'default'. This is available on Nexus 9000 series switches running NX-OS software release 9.2(x) or higher.
global_suppress_arp
boolean
    Choices:
  • no
  • yes
Enables ARP suppression for all VNIs. This is available on NX-OS 9K series running 9.2.x or higher.
host_reachability
boolean
    Choices:
  • no
  • yes
Specify mechanism for host reachability advertisement. A Boolean value of 'true' indicates that BGP will be used for host reachability advertisement. A Boolean value of 'false' indicates that no protocol is used for host reachability advertisement. Other host reachability advertisement protocols (e.g. OpenFlow, controller, etc.) are not supported.
interface
string / required
Interface name for the VXLAN Network Virtualization Endpoint.
multisite_border_gateway_interface
string
added in 1.1.0
Specify the loopback interface whose IP address should be used for the NVE Multisite Border-gateway Interface. This is available on specific Nexus 9000 series switches running NX-OS 7.0(3)I7(x) or higher. Specify "default" to remove an existing gateway config.
shutdown
boolean
    Choices:
  • no
  • yes
Administratively shutdown the NVE interface.
source_interface
string
Specify the loopback interface whose IP address should be used for the NVE interface.
source_interface_hold_down_time
string
Suppresses advertisement of the NVE loopback address until the overlay has converged.
state
string
    Choices:
  • present ←
  • absent
Determines whether the config should be present or not on the device.

Note

- cisco.nxos.nxos_vxlan_vtep:
    interface: nve1
    description: default
    host_reachability: true
    source_interface: Loopback0
    source_interface_hold_down_time: 30
    shutdown: default
    multisite_border_gateway_interface: Loopback0

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list
always
commands sent to the device

Sample:
['interface nve1', 'source-interface loopback0', 'source-interface hold-down-time 30', 'description simple description', 'shutdown', 'host-reachability protocol bgp', 'multisite border-gateway interface loopback0']


Authors

  • Gabriele Gerbino (@GGabriele)