junipernetworks.junos.junos_lacp_interfaces_module.rst

junipernetworks.junos.junos_lacp_interfaces

LACP interfaces resource module

Version added: 1.0.0

• Synopsis
• Parameters
• Examples
• Return Values
• Status

Synopsis

• This module manages Link Aggregation Control Protocol (LACP) attributes of interfaces on Juniper JUNOS devices.

Parameters

Parameter				Choices/Defaults	Comments
config list / elements=dictionary					The list of dictionaries of LACP interfaces options.
	force_up boolean			Choices: no yes	This is a boolean argument to control if the port should be up in absence of received link Aggregation Control Protocol Data Unit (LACPDUS). This value is applicable for member interfaces only.
	name string				Name Identifier of the interface or link aggregation group.
	period string			Choices: fast slow	Timer interval for periodic transmission of LACP packets. If the value is set to fast the packets are received every second and if the value is slow the packets are received every 30 seconds. This value is applicable for aggregate interface only.
	port_priority integer				Priority of the member port. This value is applicable for member interfaces only. Refer to vendor documentation for valid values.
	sync_reset string			Choices: disable enable	The argument notifies minimum-link failure out of sync to peer. If the value is disable it disables minimum-link failure handling at LACP level and if value is enable it enables minimum-link failure handling at LACP level. This value is applicable for aggregate interface only.
	system dictionary				This dict object contains configurable options related to LACP system parameters for the link aggregation group. This value is applicable for aggregate interface only.
		mac dictionary			Specifies the system ID to use in LACP negotiations for the bundle, encoded as a MAC address.
			address string		The system ID to use in LACP negotiations.
		priority integer			Specifies the system priority to use in LACP negotiations for the bundle. Refer to vendor documentation for valid values.
running_config string					This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show interface. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string				Choices: merged ← replaced overridden deleted gathered parsed rendered	The state of the configuration after module completion.

Examples

# Using merged
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae4;
#     }
# }
# ge-0/0/3 {
#    ether-options {
#         802.3ad ae0;
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }

- name: Merge provided configuration with device configuration
  junipernetworks.junos.junos_lacp_interfaces:
    config:
      - name: ae0
        period: fast
        sync_reset: enable
        system:
          priority: 100
          mac:
            address: 00:00:00:00:00:02
      - name: ge-0/0/3
        port_priority: 100
        force_up: true
    state: merged

# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae4;
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae0;
#         }
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             periodic fast;
#             sync-reset enable;
#             system-priority 100;
#             system-id 00:00:00:00:00:02;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }

# Using replaced
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae4;
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae0;
#         }
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             periodic fast;
#             sync-reset enable;
#             system-priority 100;
#             system-id 00:00:00:00:00:02;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }

- name: Replace device LACP interfaces configuration with provided configuration
  junipernetworks.junos.junos_lacp_interfaces:
    config:
      - name: ae0
        period: slow
    state: replaced

# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae4;
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae0;
#         }
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             periodic slow;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }

# Using overridden
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae4;
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae0;
#         }
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             periodic slow;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }

- name: Overrides all device LACP interfaces configuration with provided configuration
  junipernetworks.junos.junos_lacp_interfaces:
    config:
      - name: ae0
        system:
          priority: 300
          mac:
            address: 00:00:00:00:00:03
      - name: ge-0/0/2
        port_priority: 200
        force_up: false
    state: overridden

# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 port-priority 200;
#             }
#             ae4;
#         }
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae0;
#         }
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             system-priority 300;
#             system-id 00:00:00:00:00:03;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }

# Using deleted
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 port-priority 200;
#             }
#             ae4;
#         }
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae0;
#         }
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             system-priority 300;
#             system-id 00:00:00:00:00:03;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }

- name: "Delete LACP interfaces attributes of given interfaces (Note: This won't delete the interface itself)"
  junipernetworks.junos.junos_lacp_interfaces:
    config:
      - name: ae0
      - name: ge-0/0/3
      - name: ge-0/0/2
    state: deleted

# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae4;
#     }
# }
# ge-0/0/3 {
#    ether-options {
#         802.3ad ae0;
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }
# Using gathered
# Before state:
# ------------
#
# user@junos01# show interfaces
# ansible@cm123456tr21# show interfaces
# ge-0/0/1 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae1;
#         }
#     }
# }
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae1;
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad ae2;
#     }
# }
# ge-0/0/4 {
#     ether-options {
#         802.3ad ae2;
#     }
# }
# ge-1/0/0 {
#     unit 0 {
#         family inet {
#             address 192.168.100.1/24;
#             address 10.200.16.20/24;
#         }
#         family inet6;
#     }
# }
# ge-2/0/0 {
#     unit 0 {
#         family inet {
#             address 192.168.100.2/24;
#             address 10.200.16.21/24;
#         }
#         family inet6;
#     }
# }
# ge-3/0/0 {
#     unit 0 {
#         family inet {
#             address 192.168.100.3/24;
#             address 10.200.16.22/24;
#         }
#         family inet6;
#     }
# }
# ae1 {
#     description "Configured by Ansible";
#     aggregated-ether-options {
#         lacp {
#             periodic fast;
#             sync-reset enable;
#             system-priority 100;
#             system-id 00:00:00:00:00:02;
#         }
#     }
# }
# ae2 {
#     description "Configured by Ansible";
# }
# em1 {
#     description TEST;
# }
# fxp0 {
#     description ANSIBLE;
#     speed 1g;
#     link-mode automatic;
#     unit 0 {
#         family inet {
#             address 10.8.38.38/24;
#         }
#     }
# }
- name: Gather junos lacp interfaces as in given arguments
  junipernetworks.junos.junos_lacp_interfaces:
    state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
#         {
#             "force_up": true,
#             "name": "ge-0/0/1",
#             "port_priority": 100
#         },
#         {
#             "name": "ae1",
#             "period": "fast",
#             "sync_reset": "enable",
#             "system": {
#                 "mac": {
#                     "address": "00:00:00:00:00:02"
#                 },
#                 "priority": 100
#             }
#         }
#     ]
# After state:
# ------------
#
# ansible@cm123456tr21# show interfaces
# ge-0/0/1 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae1;
#         }
#     }
# }
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae1;
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad ae2;
#     }
# }
# ge-0/0/4 {
#     ether-options {
#         802.3ad ae2;
#     }
# }
# ge-1/0/0 {
#     unit 0 {
#         family inet {
#             address 192.168.100.1/24;
#             address 10.200.16.20/24;
#         }
#         family inet6;
#     }
# }
# ge-2/0/0 {
#     unit 0 {
#         family inet {
#             address 192.168.100.2/24;
#             address 10.200.16.21/24;
#         }
#         family inet6;
#     }
# }
# ge-3/0/0 {
#     unit 0 {
#         family inet {
#             address 192.168.100.3/24;
#             address 10.200.16.22/24;
#         }
#         family inet6;
#     }
# }
# ae1 {
#     description "Configured by Ansible";
#     aggregated-ether-options {
#         lacp {
#             periodic fast;
#             sync-reset enable;
#             system-priority 100;
#             system-id 00:00:00:00:00:02;
#         }
#     }
# }
# ae2 {
#     description "Configured by Ansible";
# }
# em1 {
#     description TEST;
# }
# fxp0 {
#     description ANSIBLE;
#     speed 1g;
#     link-mode automatic;
#     unit 0 {
#         family inet {
#             address 10.8.38.38/24;
#         }
#     }
# }
# Using parsed
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
# <interfaces>
#         <interface>
#             <name>ge-0/0/1</name>
#             <ether-options>
#                 <ieee-802.3ad>
#                     <lacp>
#                         <force-up/>
#                         <port-priority>100</port-priority>
#                     </lacp>
#                     <bundle>ae1</bundle>
#                 </ieee-802.3ad>
#             </ether-options>
#         </interface>
#         <interface>
#             <name>ge-0/0/2</name>
#             <ether-options>
#                 <ieee-802.3ad>
#                     <bundle>ae1</bundle>
#                 </ieee-802.3ad>
#             </ether-options>
#         </interface>
#         <interface>
#             <name>ge-0/0/3</name>
#             <ether-options>
#                 <ieee-802.3ad>
#                     <bundle>ae2</bundle>
#                 </ieee-802.3ad>
#             </ether-options>
#         </interface>
#         <interface>
#             <name>ge-0/0/4</name>
#             <ether-options>
#                 <ieee-802.3ad>
#                     <bundle>ae2</bundle>
#                 </ieee-802.3ad>
#             </ether-options>
#         </interface>
#         <interface>
#             <name>ge-1/0/0</name>
#             <unit>
#                 <name>0</name>
#                 <family>
#                     <inet>
#                         <address>
#                             <name>192.168.100.1/24</name>
#                         </address>
#                         <address>
#                             <name>10.200.16.20/24</name>
#                         </address>
#                     </inet>
#                     <inet6>
#                     </inet6>
#                 </family>
#             </unit>
#         </interface>
#         <interface>
#             <name>ge-2/0/0</name>
#             <unit>
#                 <name>0</name>
#                 <family>
#                     <inet>
#                         <address>
#                             <name>192.168.100.2/24</name>
#                         </address>
#                         <address>
#                             <name>10.200.16.21/24</name>
#                         </address>
#                     </inet>
#                     <inet6>
#                     </inet6>
#                 </family>
#             </unit>
#         </interface>
#         <interface>
#             <name>ge-3/0/0</name>
#             <unit>
#                 <name>0</name>
#                 <family>
#                     <inet>
#                         <address>
#                             <name>192.168.100.3/24</name>
#                         </address>
#                         <address>
#                             <name>10.200.16.22/24</name>
#                         </address>
#                     </inet>
#                     <inet6>
#                     </inet6>
#                 </family>
#             </unit>
#         </interface>
#         <interface>
#             <name>ae1</name>
#             <description>Configured by Ansible</description>
#             <aggregated-ether-options>
#                 <lacp>
#                     <periodic>fast</periodic>
#                     <sync-reset>enable</sync-reset>
#                     <system-priority>100</system-priority>
#                     <system-id>00:00:00:00:00:02</system-id>
#                 </lacp>
#             </aggregated-ether-options>
#         </interface>
#         <interface>
#             <name>ae2</name>
#             <description>Configured by Ansible</description>
#         </interface>
#         <interface>
#             <name>em1</name>
#             <description>TEST</description>
#         </interface>
#         <interface>
#             <name>fxp0</name>
#             <description>ANSIBLE</description>
#             <speed>1g</speed>
#             <link-mode>automatic</link-mode>
#             <unit>
#                 <name>0</name>
#                 <family>
#                     <inet>
#                         <address>
#                             <name>10.8.38.38/24</name>
#                         </address>
#                     </inet>
#                 </family>
#             </unit>
#         </interface>
#     </interfaces>
#     </configuration>
# </rpc-reply>
# - name: Convert interfaces config to argspec without connecting to the appliance
#   junipernetworks.junos.junos_lacp_interfaces:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
#         {
#             "force_up": true,
#             "name": "ge-0/0/1",
#             "port_priority": 100
#         },
#         {
#             "name": "ae1",
#             "period": "fast",
#             "sync_reset": "enable",
#             "system": {
#                 "mac": {
#                     "address": "00:00:00:00:00:02"
#                 },
#                 "priority": 100
#             }
#         }
#     ]
# Using rendered
- name: Render platform specific xml from task input using rendered state
  junipernetworks.junos.junos_lacp_interfaces:
    config:
      - name: ae1
        period: fast
        sync_reset: enable
        system:
          priority: 100
          mac:
            address: 00:00:00:00:00:02

      - name: ge-0/0/1
        port_priority: 100
        force_up: true
    state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": "<nc:interfaces
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#     <nc:interface>
#         <nc:name>ae1</nc:name>
#         <nc:aggregated-ether-options>
#             <nc:lacp>
#                 <nc:periodic>fast</nc:periodic>
#                 <nc:sync-reset>enable</nc:sync-reset>
#                 <nc:system-id>00:00:00:00:00:02</nc:system-id>
#                 <nc:system-priority>100</nc:system-priority>
#             </nc:lacp>
#         </nc:aggregated-ether-options>
#     </nc:interface>
#     <nc:interface>
#         <nc:name>ge-0/0/1</nc:name>
#         <nc:ether-options>
#             <nc:ieee-802.3ad>
#                 <nc:lacp>
#                     <nc:port-priority>100</nc:port-priority>
#                     <nc:force-up/>
#                 </nc:lacp>
#             </nc:ieee-802.3ad>
#         </nc:ether-options>
#     </nc:interface>
# </nc:interfaces>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before list	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list	always	The set of commands pushed to the remote device. Sample: ['<nc:interfaces xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"> <nc:interface> <nc:name>ae1</nc:name> <nc:aggregated-ether-options> <nc:lacp> <nc:periodic>fast</nc:periodic> <nc:sync-reset>enable</nc:sync-reset> <nc:system-id>00:00:00:00:00:02</nc:system-id> <nc:system-priority>100</nc:system-priority> </nc:lacp> </nc:aggregated-ether-options> </nc:interface> <nc:interface> <nc:name>ge-0/0/1</nc:name> <nc:ether-options> <nc:ieee-802.3ad> <nc:lacp> <nc:port-priority>100</nc:port-priority> <nc:force-up/> </nc:lacp> </nc:ieee-802.3ad> </nc:ether-options> </nc:interface> </nc:interfaces>', 'xml 2', 'xml 3']

Status

Authors

• Ganesh Nalawade (@ganeshrn)