Tasmota Z2T config report

[xav-git]

Dear all,
I am looking for the correct command syntax to issue a config report from Tasmota in order to request reporting of specific attribute under a given cluster. I have been searching arround for such example but did not find any.
What I am trying to achieve is to configure reports for three attributes ["0x0000", "0x0100","0x0102"] under cluster 0x0702

I have tried multiple syntax, and below I have three examples which are failing :

20:52:03.856 CMD: ZbSend { "device":"Lixee", "endpoint":"0x01", "cluster":"0x0702", "report":["0x0000", "0x0100","0x0102"]}
20:52:03.865 MQT: stat/tasmota_lixee/RESULT = {"ZbSend":"Missing parameters"}

21:10:37.876 CMD: ZbSend { "device":"Lixee", "endpoint":"0x01", "cluster":"0x0702", "report":"0x0000", "MinInterval":60, "MaxInterval":61,"ReportableChange":0 }
21:10:37.885 MQT: stat/tasmota_lixee/RESULT = {"ZbSend":"Missing parameters"}

21:25:42.782 CMD: ZbSend { "device":"Lixee", "endpoint":"0x01", "cluster":"0x0702", "config":{"0x0000":{"MinInterval":60,"MaxInterval":61,"ReportableChange":0}}}
21:25:42.794 MQT: stat/tasmota_lixee/RESULT = {"ZbSend":"Unknown attribute '0x0000'"}

Any help or hints would be highly appreciated.

[xav-git]

I believe this command should be correct however I get an error of "Unsupported attribute type'

12:51:45.826 CMD:  ZbSend { "device":"Lixee", "endpoint":"0x01", "cluster":"0x0702", "config":{"0702/0000":{"MinInterval":60,"MaxInterval":61,"ReportableChange":1}}}
12:51:45.838 MQT: stat/tasmota_lixee/RESULT = {"ZbSend":"Unsupported attribute type '��!

Is it required to configure the device with a .zb file to issue such send/config commands ?

[s-hadinger]

The command should look like this:

ZbSend {"Device":"Lixee","Config":{"CurrentSummationDelivered":{"MinInterval":60,"MaxInterval":3600,"ReportableChange":2}}}

However something is off, maybe because the type is uint48. I need to find out what is wrong here.

[s-hadinger]

Please use the latest version. It works now.

[xav-git]

Hello, Thank you for the fix. After the upgrade to 13.4.0.3 zigbee messages are successfully sent and config response received.
Sensor report are generated by the end device.

Both command syntax are working.

Thanks again!

07:04:58.810 CMD: ZbSend { "device":"Lixee", "endpoint":"0x01", "cluster":"0x0702", "config":{"0702/0000":{"MinInterval":60,"MaxInterval":61,"ReportableChange":1}}}
07:04:58.822 MQT: stat/tasmota_lixee/RESULT = {"ZbSend":"Done"}
07:04:59.024 MQT: tele/tasmota_lixee/SENSOR = {"ZbReceived":{"0xCDAB":{"Device":"0xCDAB","Name":"Lixee","ConfigResponse":{},"Endpoint":1,"LinkQuality":43}}}
07:06:00.580 MQT: tele/tasmota_lixee/SENSOR = {"ZbReceived":{"0xCDAB":{"Device":"0xCDAB","Name":"Lixee","CurrentSummationDelivered":"0x000004A6C340","Endpoint":1,"LinkQuality":36}}}
07:07:01.902 MQT: tele/tasmota_lixee/SENSOR = {"ZbReceived":{"0xCDAB":{"Device":"0xCDAB","Name":"Lixee","CurrentSummationDelivered":"0x000004A6C34B","Endpoint":1,"LinkQuality":40}}}
07:08:03.168 MQT: tele/tasmota_lixee/SENSOR = {"ZbReceived":{"0xCDAB":{"Device":"0xCDAB","Name":"Lixee","CurrentSummationDelivered":"0x000004A6C357","Endpoint":1,"LinkQuality":43}}}

07:10:55.444 CMD: ZbSend {"Device":"Lixee","Config":{"CurrentSummationDelivered":{"MinInterval":60,"MaxInterval":90,"ReportableChange":2}}}
07:10:55.458 MQT: stat/tasmota_lixee/RESULT = {"ZbSend":"Done"}
07:10:55.612 MQT: tele/tasmota_lixee/SENSOR = {"ZbReceived":{"0xCDAB":{"Device":"0xCDAB","Name":"Lixee","ConfigResponse":{},"Endpoint":1,"LinkQuality":43}}}
07:12:25.588 MQT: tele/tasmota_lixee/SENSOR = {"ZbReceived":{"0xCDAB":{"Device":"0xCDAB","Name":"Lixee","CurrentSummationDelivered":"0x000004A6C3C6","Endpoint":1,"LinkQuality":40}}}
07:13:56.012 MQT: tele/tasmota_lixee/SENSOR = {"ZbReceived":{"0xCDAB":{"Device":"0xCDAB","Name":"Lixee","CurrentSummationDelivered":"0x000004A6C3FA","Endpoint":1,"LinkQuality":40}}}

[s-hadinger]

Thanks for reporting back success