Sonoff RF Bridge R2 V2.2

[StefanTR96]

PROBLEM DESCRIPTION

I flashed Tasmota on a Sonoff Bridge R2 V2.2 without Portisch and learned 4 Keys of a Remote (RfKey 1 - 4) which worked perfect. Using this via MQTT and in the console I get the Result "19:35:09.551 MQT: tele/SonoffRFBridge2/RESULT = {"Time":"2024-08-17T19:35:09","RfReceived":{"Sync":18836,"Low":650,"High":1840,"Data":"93CF64","RfKey":2}}

After about a day, I only get Rfraw outputs not linked to the RfKeys. After a restart (Reconnect Power or restarting via UI, everything works again as expected for another day.

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): Sonoff RF Bridge R2 V2.2
• Tasmota binary firmware version number used: Tasmota 14.1.0 (release-sensors) by Theo Arends
  • Pre-compiled
  • Self-compiled
• Flashing tools used: Tasmotizer
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:
19:56:48.125 MQT: stat/SonoffRFBridge2/RESULT = {"NAME":"Generic","GPIO":[1,1,1,1,1,1,1,1,1,1,1,1,1,1],"FLAG":0,"BASE":18}
19:56:48.336 MQT: stat/SonoffRFBridge2/RESULT = {"Module":{"25":"Sonoff Bridge"}}
19:56:48.544 MQT: stat/SonoffRFBridge2/RESULT = {"GPIO0":{"32":"Button1"},"GPIO1":{"3200":"Serial Tx"},"GPIO2":{"0":"None"},"GPIO3":{"3232":"Serial Rx"},"GPIO4":{"0":"None"},"GPIO5":{"0":"None"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO12":{"0":"None"},"GPIO13":{"320":"Led_i1"},"GPIO14":{"0":"None"},"GPIO15":{"0":"None"},"GPIO16":{"0":"None"},"GPIO17":{"0":"None"}}

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

  STATUS 0 output here:
9:58:20.805 MQT: stat/SonoffRFBridge2/STATUS = {"Status":{"Module":25,"DeviceName":"Tasmota","FriendlyName":["Tasmota"],"Topic":"SonoffRFBridge2","ButtonTopic":"0","Power":"0","PowerLock":"0","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0}}
19:58:20.812 MQT: stat/SonoffRFBridge2/STATUS1 = {"StatusPRM":{"Baudrate":19200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota/release/tasmota-sensors.bin.gz","RestartReason":"Software/System restart","Uptime":"0T00:23:27","StartupUTC":"2024-08-17T18:34:53","Sleep":50,"CfgHolder":4617,"BootCount":16,"BCResetTime":"2024-08-11T22:27:10","SaveCount":38,"SaveAddress":"F6000"}}
19:58:20.818 MQT: stat/SonoffRFBridge2/STATUS2 = {"StatusFWR":{"Version":"14.1.0(release-sensors)","BuildDateTime":"2024-06-03T11:53:12","Boot":31,"Core":"2_7_6","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8285N08","CR":"435/699"}}
19:58:20.823 MQT: stat/SonoffRFBridge2/STATUS3 = {"StatusLOG":{"SerialLog":0,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["WIFI","Homenetwork"],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00008080","00006000","00004000","00000000"]}}
19:58:20.843 MQT: stat/SonoffRFBridge2/STATUS4 = {"StatusMEM":{"ProgramSize":714,"Free":288,"Heap":16,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"14325E","FlashFrequency":40,"FlashMode":"DOUT","Features":["0809","8F9A8787","0415A005","B7F7BFCF","05DA9BC4","64367CC7","00084052","20000000","54000020","0008C081","00000000"],"Drivers":"1,2,!3,!4,!5,6,7,!8,9,10,12,!14,!16,!17,!20,!21,!24,29,!34,62,!65,!66,!68","Sensors":"1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,17,18,19,20,21,22,26,31,34,37,39,40,42,43,45,51,52,55,56,58,59,62,64,66,67,74,98,103,105","I2CDriver":"7,8,9,10,11,12,13,14,15,17,18,20,24,29,31,36,41,42,44,46,48,69,76"}}
19:58:20.851 MQT: stat/SonoffRFBridge2/STATUS5 = {"StatusNET":{"Hostname":"SonoffRFBridge2","IPAddress":"192.168.1.117","Gateway":"192.168.1.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.1.4","DNSServer2":"0.0.0.0","Mac":"34:98:7A:C3:CD:8B","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0}}
19:58:20.856 MQT: stat/SonoffRFBridge2/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.1.136","MqttPort":1883,"MqttClientMask":"SonoffRFBridge2","MqttClient":"SonoffRFBridge2","MqttUser":"MQTTUSER","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
19:58:20.862 MQT: stat/SonoffRFBridge2/STATUS7 = {"StatusTIM":{"UTC":"2024-08-17T18:58:20Z","Local":"2024-08-17T19:58:20","StartDST":"2024-03-31T02:00:00","EndDST":"2024-10-27T03:00:00","Timezone":"+01:00","Sunrise":"05:46","Sunset":"20:01"}}
19:58:20.868 MQT: stat/SonoffRFBridge2/STATUS10 = {"StatusSNS":{"Time":"2024-08-17T19:58:20"}}
19:58:20.874 MQT: stat/SonoffRFBridge2/STATUS11 = {"StatusSTS":{"Time":"2024-08-17T19:58:20","Uptime":"0T00:23:27","UptimeSec":1407,"Heap":16,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":2,"SSId":"Homenetwork","BSSId":"3C:52:A1:75:F0:E8","Channel":1,"Mode":"11n","RSSI":54,"Signal":-73,"LinkCount":1,"Downtime":"0T00:00:05"}}}

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:

EXPECTED BEHAVIOUR

That the Tasmota Bridge Supports RFKey 1 to 4 on each Button over the whole Time.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)