Add option to remove the device addr from json payload

[jimmyw]

Description:

Built on top of #10353 that should be merged first. Could not add this as a separate commit as it conflicts with previous pull request.

Zigbee: Remove the device addr from json payload, which can be used with zb_topic_fname where the addr is already known from the topic. Simplifies home assistant integration

Example:

21:56:18.664 CMD: SetOption119 0
21:56:18.670 MQT: stat/tasmota_E302DA/RESULT = {"SetOption119":"OFF"}
21:56:29.415 MQT: tele/tasmota_E302DA/1350/ZbReceived = {"0x1350":{"Device":"0x1350","Name":"Button_Mancave_Light","0006!02":"","Power":2,"Endpoint":1,"LinkQuality":37}} 
21:56:38.364 CMD: SetOption119 1
21:56:38.370 MQT: stat/tasmota_E302DA/RESULT = {"SetOption119":"ON"}
21:56:41.246 MQT: tele/tasmota_E302DA/1350/ZbReceived = {"Device":"0x1350","Name":"Button_Mancave_Light","0006!02":"","Power":2,"Endpoint":1,"LinkQuality":37} 

Homeassistant could be simplified this way

--- a/data/homeassistant/config/configuration.yaml
+++ b/data/homeassistant/config/configuration.yaml
@@ -150,8 +150,8 @@ sensor:
     name: "Guestroom Temperature"
     state_topic: "tele/tasmota_E302DA/3040/zbReceived"
     value_template: >
-      {%- if value_json['0x3040']['Temperature'] is defined -%}
-      {{ value_json['0x3040']['Temperature'] }}
+      {%- if value_json['Temperature'] is defined -%}
+      {{ value_json['Temperature'] }}
       {%- else -%}
       {{ states('sensor.guestroom_temperature') }}
       {%- endif -%}

Or just

--- a/data/homeassistant/config/configuration.yaml
+++ b/data/homeassistant/config/configuration.yaml
@@ -150,8 +150,8 @@ sensor:
     name: "Guestroom Temperature"
     state_topic: "tele/tasmota_E302DA/3040/zbReceived"
     value_template: >
-      {%- if value_json['0x3040']['Temperature'] is defined -%}
-      {{ value_json['0x3040']['Temperature'] }}
+      {{ value_json['Temperature'] }}
-      {%- else -%}
-      {{ states('sensor.guestroom_temperature') }}
-     {%- endif -%}

If its a sensor that just returns one value every time.

Related issue (if applicable): Builds on top of #10353

Checklist:

• The pull request is done against the latest development branch
• Only relevant files were touched
• Only one feature/fix was added per PR and the code change compiles without warnings
• The code change is tested and works on Tasmota core ESP8266 V.2.7.4.9
• The code change is tested and works on Tasmota core ESP32 V.1.0.5-rc4
• I accept the CLA.

NOTE: The code change must pass CI tests. Your PR cannot be merged unless tests pass

[arendst]

@s-hadinger Agree?

[hallard]

Sorry guys, just tried this awesome option118 but looks like my topic is not splitted, did I missed one other option before?

03:08:21.405 MQT: tele/zigbee2tasmota_040BC6/SENSOR = {"ZbReceived":{"0x4DDE":{"Device":"0x4DDE","Power":1,"Power2":0,"Endpoint":1,"LinkQuality":165}}}
03:08:32.012 CMD: setoption118 1
03:08:32.017 MQT: stat/zigbee2tasmota_040BC6/RESULT = {"SetOption118":"ON"}
03:08:34.039 MQT: tele/zigbee2tasmota_040BC6/SENSOR = {"0x4DDE":{"Device":"0x4DDE","Power":1,"Power2":0,"Endpoint":1,"LinkQuality":162}}
03:08:54.850 CMD: setoption119 1
03:08:54.855 MQT: stat/zigbee2tasmota_040BC6/RESULT = {"SetOption119":"ON"}
03:08:56.372 MQT: tele/zigbee2tasmota_040BC6/SENSOR = {"Device":"0x4DDE","Power":1,"Power2":0,"Endpoint":1,"LinkQuality":165}

[hallard]

Got it must SetOption89 1 before :-)