Connection lost after a Time

[Arut42]

PROBLEM DESCRIPTION

After one to two days the device is not able to get pinged. Then I have to kick it from Wlan and let it reconnect.
After that it is working normaly.

Most of the time this happens when the Device went in to Wlan-powersave-mode.
I'm using unfi Accespoint with a distance of around 10m.
Console output after reconect: 07:50:53 RSL: STATE = {"Time":"2020-05-14T07:50:53","Uptime":"2T15:30:10","UptimeSec":228610,"Heap":27,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"OFF","Wifi":{"AP":1,"SSId":"xxx","BSSId":"xxx","Channel":11,"RSSI":50,"Signal":-75,"LinkCount":4,"Downtime":"0T00:00:13"}}

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in the docs
• Searched the problem in the forum
• [-] Searched the problem in the chat
• Device used (e.g., Sonoff Basic): Teckin SP22
• Tasmota binary firmware version number used: 8.2.0
  • Pre-compiled
  • Self-compiled
    • IDE / Compiler used: _____
• Flashing tools used: tuya
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:
09:56:38 CMD: Backlog Template; Module; GPIO 255
09:56:38 RSL: RESULT = {"NAME":"Teckin","GPIO":[0,17,0,57,134,132,0,0,131,56,21,0,0],"FLAG":0,"BASE":52}
09:56:38 RSL: RESULT = {"Module":{"52":"Teckin"}}
09:56:38 RSL: RESULT = {"GPIO0":{"0":"None"},"GPIO1":{"17":"Button1"},"GPIO2":{"0":"None"},"GPIO3":{"56":"Led1i"},"GPIO4":{"134":"BL0937 CF"},"GPIO5":{"132":"HLWBL CF1"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO12":{"131":"HLWBL SELi"},"GPIO13":{"158":"LedLinki"},"GPIO14":{"21":"Relay1"},"GPIO15":{"0":"None"},"GPIO16":{"0":"None"}}

• [-] If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:
09:59:51 CMD: Backlog Rule1; Rule2; Rule3;
09:59:51 RSL: RESULT = {"Rule1":"OFF","Once":"OFF","StopOnError":"OFF","Free":511,"Rules":""}
09:59:52 RSL: RESULT = {"Rule2":"OFF","Once":"OFF","StopOnError":"OFF","Free":511,"Rules":""}
09:59:52 RSL: RESULT = {"Rule3":"OFF","Once":"OFF","StopOnError":"OFF","Free":511,"Rules":""}

• Provide the output of this command: Status 0:

  STATUS 0 output here:
10:00:49 CMD: Status 0
10:00:49 RSL: STATUS = {"Status":{"Module":52,"FriendlyName":["xxx"],"Topic":"tasmota","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}}
10:00:49 RSL: STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://thehackbox.org/tasmota/release/tasmota.bin","RestartReason":"Software/System restart","Uptime":"2T17:40:06","StartupUTC":"2020-05-11T15:20:43","Sleep":50,"CfgHolder":4617,"BootCount":11,"BCResetTime":"2020-05-11T16:20:51","SaveCount":55,"SaveAddress":"FA000"}}
10:00:49 RSL: STATUS2 = {"StatusFWR":{"Version":"8.2.0(tasmota)","BuildDateTime":"2020-03-20T14:45:23","Boot":31,"Core":"STAGE","SDK":"2.2.2-dev(38a443e)","Hardware":"ESP8285","CR":"354/699"}}
10:00:49 RSL: STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["xxx",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008001","2805C8000100060000005A00000000000000","00000001","00000000"]}}
10:00:49 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":577,"Free":424,"Heap":26,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashMode":3,"Features":["00000809","8FDAE397","043683A0","000000CD","010013C0","C000F981","00000004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}}
10:00:49 RSL: STATUS5 = {"StatusNET":{"Hostname":"xxx","IPAddress":"xxx","Gateway":"xxx","Subnetmask":"255.255.255.0","DNSServer":"xxx","Mac":"xxx","Webserver":2,"WifiConfig":2,"WifiPower":17.0}}
10:00:49 RSL: STATUS7 = {"StatusTIM":{"UTC":"2020-05-14T09:00:49","Local":"2020-05-14T10:00:49","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"05:09","Sunset":"20:24"}}
10:00:49 RSL: STATUS9 = {"StatusPTH":{"PowerDelta":0,"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}}
10:00:49 RSL: STATUS10 = {"StatusSNS":{"Time":"2020-05-14T10:00:49","ENERGY":{"TotalStartTime":"2020-05-11T14:59:36","Total":0.795,"Yesterday":0.000,"Today":0.157,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":229,"Current":0.000}}}
10:00:49 RSL: STATUS11 = {"StatusSTS":{"Time":"2020-05-14T10:00:49","Uptime":"2T17:40:06","UptimeSec":236406,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"xxx","BSSId":"xxx","Channel":11,"RSSI":48,"Signal":-76,"LinkCount":4,"Downtime":"0T00:00:13"}}}
10:00:53 RSL: STATE = {"Time":"2020-05-14T10:00:53","Uptime":"2T17:40:10","UptimeSec":236410,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"xxx","BSSId":"xxx","Channel":11,"RSSI":48,"Signal":-76,"LinkCount":4,"Downtime":"0T00:00:13"}}
10:00:53 RSL: SENSOR = {"Time":"2020-05-14T10:00:53","ENERGY":{"TotalStartTime":"2020-05-11T14:59:36","Total":0.795,"Yesterday":0.000,"Today":0.157,"Period":1,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":229,"Current":0.000}}

• Provide the output of the Console log output when you experience your issue; if applicable:
  (Please use weblog 4 for more debug information)

  Console output here:
weblog 4
10:05:22 RSL: RESULT = {"WebLog":4}
10:05:23 CFG: Saved to flash at F9, Count 56, Bytes 4096
10:05:34 WIF: Checking connection...
10:05:53 RSL: STATE = {"Time":"2020-05-14T10:05:53","Uptime":"2T17:45:10","UptimeSec":236710,"Heap":27,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"xxx","BSSId":"xxx","Channel":11,"RSSI":48,"Signal":-76,"LinkCount":4,"Downtime":"0T00:00:13"}}
10:05:53 RSL: SENSOR = {"Time":"2020-05-14T10:05:53","ENERGY":{"TotalStartTime":"2020-05-11T14:59:36","Total":0.801,"Yesterday":0.000,"Today":0.163,"Period":6,"Power":96,"ApparentPower":129,"ReactivePower":86,"Factor":0.74,"Voltage":228,"Current":0.565}}
10:05:54 WIF: Checking connection...

TO REPRODUCE

Steps to reproduce the behavior:
Wait 2 days if device went do powersaving it dont wake up

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.
Device should work

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[kugelkopf123]

Perhaps Setoption41 could help you. https://tasmota.github.io/docs/Commands/

_{Sent with GitHawk}

[giacomotontini]

Noticed the same thing on recent release.

[Jason2866]

Sorry, we cant help since it is a router / AP problem. See #7098 (comment)

[ascillato2]

Closing this issue as it is duplicated. Sorry.

Please, read the Contributing Guideline and Policy. Thanks.

---

Support Information (Guide)

See Wiki for more information.
See FAQ for common questions/answers and links if none of your question is in the list
See Chat for more user experience.
See Community for forum.
See Code of Conduct