LUT calibration
HyperHDR v21 introduced a much simplified color calibration procedure and from now on, all you need to do is play the calibration MP4 file in your favorite video player and HyperHDR will take care of the rest. You no longer need a PC and use a browser to calibrate HDR, which was very inconvenient and in addition it did not calibrate the video player itself, although this option is still there if you want.
HyperHDR v21 was also the first to introduce the NV12 format to flatbuffers. And it is not just an empty convenience because thanks to LUT tables, the resource-consuming and CPU-intensive conversion of NV12 to RGB is eliminated and we can also detect which YUV coef was used by the source. Without LUT and calibration NV12 in flatbuffers, it is just a dummy so called "feature" that even worsens the previous RGB solution. Anyway you can test flatbuffers with and without NV12 enabled and then see in the top command a positive effect in CPU load and memory usage of capturing backend + HyperHDR processes. Remember that piccap may ignore NV12 format for GUI capturing.
Remember the following assumptions:
- calibration only supports YUV/NV12/MJPEG/P010 formats
- recommended resolution (it does not affect the load during calibration) is 1920x1080. So if you have the "Quarter of frame mode" option enabled in the grabber, you must disable it for the calibration time.
Download the HDR calibration file calibration_HDR_yuv420_limited_range.mp4. If for some reason you want to calibrate SDR (e.g. for webOS) then use: calibration_SDR_yuv420_limited_range.mp4.
Later after the calibration process is complete you can test & play this HDR file for_testing_after_calibration_HDR_yuv420_limited_range.mp4 and check the result in the HyperHDR live preview window.
If you want to calibrate LUT for webOS, it is recommended to either not enable LCH color correction or redirect a piccap stream to your computer and use it as a calibration instance, and then upload the finished LUT to webOS. Unlike the previous version, the current calibration process heavily loads all CPU cores.
Open the calibration page
You can enable LCH color correction, which can significantly improve results, but also causes a significant load on the processor. On the other hand, calibration is only done once, but make sure the processor has adequate cooling. Do not enable LCH correction for P010 video format, as it does not need it at all.
Open the video preview and start playing the test file on your player. You should see dots like in the picture. Then start the calibration. You have to do it rather quickly, because the calibration file is 90 seconds long and the calibration needs about 20 continuous seconds from anywhere in the video. Make sure there is no player interface in the live preview, e.g. progress bar or "Now playing" texts etc.
For HDR test video pay attention to whether the video has triggered HDR mode on your TV. Otherwise something is wrong with the video player.
After a few seconds, you should see confirmation that calibration is working correctly and HyperHDR has recognized the first calibration frames.
And after a few minutes it's ready. That's it. You can see detailed calibrated colors in the logs right after calibration.
