Home

How to compile project using Github Action and change the speed or pinout for your board. The process is very similar to compiling HyperSerialESP32 but with some exception: due to the hardware limitation of esp8266 board you can adjust only the serial port speed. You cannot change the default pinout or use other advanced HyperSerialESP32 features.

1. Fork the project. You will commit all changes to your forked repository.

---

2. Enable your fork Github Action

---

3. Make your changes to platformio.ini file

---

4. Turn on the online editor

---

5. Change default speed (-DSERIALCOM_SPEED=2000000) to desired speed.

---

6. Change pinout (-DDATA_PIN=2 -DCLOCK_PIN=0) to desired pinout. -DCLOCK_PIN is used only for SPI leds, not for sk6812 or ws2812b.

---

7. Save changes (at the bottom of the page)

---

8. After few minutes download your firmware

---