This chart installs the AWS CNI Daemonset: https://github.com/aws/amazon-vpc-cni-k8s
- Kubernetes 1.11+ running on AWS
- Helm v3
First add the EKS repository to Helm:
helm repo add eks https://aws.github.io/eks-chartsTo install the chart with the release name aws-vpc-cni and default configuration:
$ helm install aws-vpc-cni --namespace kube-system eks/aws-vpc-cniTo install into an EKS cluster where the CNI is already installed, see this section below
To migrate helm release for aws-vpc-cni chart from v2 to v3, see Migrate from helm v2 to helm v3
The following table lists the configurable parameters for this chart and their default values.
| Parameter | Description | Default |
|---|---|---|
affinity |
Map of node/pod affinities | {} |
cniConfig.enabled |
Enable overriding the default 10-aws.conflist file | false |
cniConfig.fileContents |
The contents of the custom cni config file | nil |
eniConfig.create |
Specifies whether to create ENIConfig resource(s) | false |
eniConfig.region |
Region to use when generating ENIConfig resource names | us-west-2 |
eniConfig.subnets |
A map of AZ identifiers to config per AZ | nil |
eniConfig.subnets.id |
The ID of the subnet within the AZ which will be used in the ENIConfig | nil |
eniConfig.subnets.securityGroups |
The IDs of the security groups which will be used in the ENIConfig | nil |
env |
List of environment variables. See here for options | (see values.yaml) |
enableWindowsIpam |
Enable windows support for your cluster | false |
enableNetworkPolicy |
Enable Network Policy Controller and Agent for your cluster | false |
enableWindowsPrefixDelegation |
Enable windows prefix delegation support for your cluster | false |
warmWindowsPrefixTarget |
Warm prefix target value for Windows prefix delegation | 0 |
warmWindowsIPTarget |
Warm IP target value for Windows prefix delegation | 1 |
minimumWindowsIPTarget |
Minimum IP target value for Windows prefix delegation | 3 |
branchENICooldown |
Number of seconds that branch ENIs remain in cooldown | 60 |
fullnameOverride |
Override the fullname of the chart | aws-node |
image.tag |
Image tag | v1.18.4 |
image.domain |
ECR repository domain | amazonaws.com |
image.region |
ECR repository region to use. Should match your cluster | us-west-2 |
image.endpoint |
ECR repository endpoint to use. | ecr |
image.account |
ECR repository account number | 602401143452 |
image.pullPolicy |
Container pull policy | IfNotPresent |
image.override |
A custom docker image to use | nil |
imagePullSecrets |
Docker registry pull secret | [] |
init.image.tag |
Image tag | v1.18.4 |
init.image.domain |
ECR repository domain | amazonaws.com |
init.image.region |
ECR repository region to use. Should match your cluster | us-west-2 |
init.image.endpoint |
ECR repository endpoint to use. | ecr |
init.image.account |
ECR repository account number | 602401143452 |
init.image.pullPolicy |
Container pull policy | IfNotPresent |
init.image.override |
A custom docker image to use | nil |
init.env |
List of init container environment variables. See here for options | (see values.yaml) |
init.securityContext |
Init container Security context | privileged: true |
init.resources |
Init container resources, will defualt to .Values.resources if not set | {} |
originalMatchLabels |
Use the original daemonset matchLabels | false |
nameOverride |
Override the name of the chart | aws-node |
nodeAgent.enabled |
If the Node Agent container should be created | true |
nodeAgent.image.tag |
Image tag for Node Agent | v1.1.3 |
nodeAgent.image.domain |
ECR repository domain | amazonaws.com |
nodeAgent.image.region |
ECR repository region to use. Should match your cluster | us-west-2 |
nodeAgent.image.endpoint |
ECR repository endpoint to use. | ecr |
nodeAgent.image.account |
ECR repository account number | 602401143452 |
nodeAgent.image.pullPolicy |
Container pull policy | IfNotPresent |
nodeAgent.securityContext |
Node Agent container Security context | capabilities: add: - "NET_ADMIN" privileged: true |
nodeAgent.enableCloudWatchLogs |
Enable CW logging for Node Agent | false |
nodeAgent.networkPolicyAgentLogFileLocation |
Log File location of Network Policy Agent | /var/log/aws-routed-eni/network-policy-agent.log |
nodeAgent.enablePolicyEventLogs |
Enable policy decision logs for Node Agent | false |
nodeAgent.metricsBindAddr |
Node Agent port for metrics | 8162 |
nodeAgent.healthProbeBindAddr |
Node Agent port for health probes | 8163 |
nodeAgent.conntrackCacheCleanupPeriod |
Cleanup interval for network policy agent conntrack cache | 300 |
nodeAgent.enableIpv6 |
Enable IPv6 support for Node Agent | false |
nodeAgent.resources |
Node Agent resources, will defualt to .Values.resources if not set | {} |
extraVolumes |
Array to add extra volumes | [] |
extraVolumeMounts |
Array to add extra mount | [] |
nodeSelector |
Node labels for pod assignment | {} |
podSecurityContext |
Pod Security Context | {} |
podAnnotations |
annotations to add to each pod | {} |
podLabels |
Labels to add to each pod | {} |
priorityClassName |
Name of the priorityClass | system-node-critical |
resources |
Resources for containers in pod | requests.cpu: 25m |
securityContext |
Container Security context | capabilities: add: - "NET_ADMIN" - "NET_RAW" |
serviceAccount.name |
The name of the ServiceAccount to use | nil |
serviceAccount.create |
Specifies whether a ServiceAccount should be created | true |
serviceAccount.annotations |
Specifies the annotations for ServiceAccount | {} |
livenessProbe |
Livenness probe settings for daemonset | (see values.yaml) |
readinessProbe |
Readiness probe settings for daemonset | (see values.yaml) |
tolerations |
Optional deployment tolerations | [{"operator": "Exists"}] |
updateStrategy |
Optional update strategy | type: RollingUpdate |
Specify each parameter using the --set key=value[,key=value] argument to helm install or provide a YAML file containing the values for the above parameters:
$ helm install aws-vpc-cni --namespace kube-system eks/aws-vpc-cni --values values.yamlIf you do not want to delete the existing aws-node resources in your cluster that run the aws-vpc-cni and then install this helm chart, you can adopt the resources into a release instead. Refer to the script below to import existing resources into helm. Once you have annotated and labeled all the resources this chart specifies, enable the originalMatchLabels flag. If you have been careful, this should not diff and leave all the resources unmodified and now under management of helm.
#!/usr/bin/env bash
set -euo pipefail
for kind in daemonSet clusterRole clusterRoleBinding serviceAccount; do
echo "setting annotations and labels on $kind/aws-node"
kubectl -n kube-system annotate --overwrite $kind aws-node meta.helm.sh/release-name=aws-vpc-cni
kubectl -n kube-system annotate --overwrite $kind aws-node meta.helm.sh/release-namespace=kube-system
kubectl -n kube-system label --overwrite $kind aws-node app.kubernetes.io/managed-by=Helm
done
kubectl -n kube-system annotate --overwrite configmap amazon-vpc-cni meta.helm.sh/release-name=aws-vpc-cni
kubectl -n kube-system annotate --overwrite configmap amazon-vpc-cni meta.helm.sh/release-namespace=kube-system
kubectl -n kube-system label --overwrite configmap amazon-vpc-cni app.kubernetes.io/managed-by=Helm
Kubernetes recommends using server-side apply for more control over the field manager. After adopting the chart resources, you can run the following command to apply the chart:
helm template aws-vpc-cni --include-crds --namespace kube-system eks/aws-vpc-cni --set originalMatchLabels=true | kubectl apply --server-side --force-conflicts --field-manager Helm -f -
## Migrate from Helm v2 to Helm v3
You can use the [Helm 2to3 plugin](https://github.com/helm/helm-2to3) to migrate releases from Helm v2 to Helm v3. For a more detailed explanation with some examples about this migration plugin, refer to Helm blog post: [How to migrate from Helm v2 to Helm v3](https://helm.sh/blog/migrate-from-helm-v2-to-helm-v3/).