feat(client-ec2): Release to show the next hop IP address for routes propagated by VPC Route Server into VPC route tables.

awstools · awstools · commit ec57020fb54f · 2025-07-30T18:17:46.000Z
diff --git a/clients/client-ec2/src/commands/AdvertiseByoipCidrCommand.ts b/clients/client-ec2/src/commands/AdvertiseByoipCidrCommand.ts
@@ -38,7 +38,6 @@ export interface AdvertiseByoipCidrCommandOutput extends AdvertiseByoipCidrResul
  *          location and start advertising it through Amazon Web Services.</p>
  *          <p>It can take a few minutes before traffic to the specified addresses starts routing to Amazon Web Services
  *          because of BGP propagation delays.</p>
- *          <p>To stop advertising the BYOIP CIDR, use <a>WithdrawByoipCidr</a>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
diff --git a/clients/client-ec2/src/commands/CreateRouteTableCommand.ts b/clients/client-ec2/src/commands/CreateRouteTableCommand.ts
@@ -95,6 +95,7 @@ export interface CreateRouteTableCommandOutput extends CreateRouteTableResult, _
  * //         VpcPeeringConnectionId: "STRING_VALUE",
  * //         CoreNetworkArn: "STRING_VALUE",
  * //         OdbNetworkArn: "STRING_VALUE",
+ * //         IpAddress: "STRING_VALUE",
  * //       },
  * //     ],
  * //     Tags: [ // TagList
diff --git a/clients/client-ec2/src/commands/DeprovisionByoipCidrCommand.ts b/clients/client-ec2/src/commands/DeprovisionByoipCidrCommand.ts
@@ -30,8 +30,8 @@ export interface DeprovisionByoipCidrCommandOutput extends DeprovisionByoipCidrR
 /**
  * <p>Releases the specified address range that you provisioned for use with your Amazon Web Services resources
  *          through bring your own IP addresses (BYOIP) and deletes the corresponding address pool.</p>
- *          <p>Before you can release an address range, you must stop advertising it using <a>WithdrawByoipCidr</a> and you must not have any IP addresses allocated from its
- *          address range.</p>
+ *          <p>Before you can release an address range, you must stop advertising it and you must not
+ *           have any IP addresses allocated from its address range.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
diff --git a/clients/client-ec2/src/commands/DescribeByoipCidrsCommand.ts b/clients/client-ec2/src/commands/DescribeByoipCidrsCommand.ts
@@ -28,9 +28,8 @@ export interface DescribeByoipCidrsCommandInput extends DescribeByoipCidrsReques
 export interface DescribeByoipCidrsCommandOutput extends DescribeByoipCidrsResult, __MetadataBearer {}
 
 /**
- * <p>Describes the IP address ranges that were specified in calls to <a>ProvisionByoipCidr</a>.</p>
- *          <p>To describe the address pools that were created when you provisioned the address
- *           ranges, use <a>DescribePublicIpv4Pools</a> or <a>DescribeIpv6Pools</a>.</p>
+ * <p>Describes the IP address ranges that were provisioned for use with Amazon Web Services resources
+ *           through through bring your own IP addresses (BYOIP).</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
diff --git a/clients/client-ec2/src/commands/DescribeImagesCommand.ts b/clients/client-ec2/src/commands/DescribeImagesCommand.ts
@@ -41,7 +41,7 @@ export interface DescribeImagesCommandOutput extends DescribeImagesResult, __Met
  *       results, with the <code>imageAllowed</code> field set to <code>true</code> for each image. In
  *         <code>audit-mode</code>, the <code>imageAllowed</code> field is set to <code>true</code> for
  *       images that meet the account's Allowed AMIs criteria, and <code>false</code> for images that
- *       don't meet the criteria. For more information, see <a>EnableAllowedImagesSettings</a>.</p>
+ *       don't meet the criteria. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-allowed-amis.html">Allowed AMIs</a>.</p>
  *          <p>The Amazon EC2 API follows an eventual consistency model. This means that the result of an API
  *       command you run that creates or modifies resources might not be immediately available to all
  *       subsequent commands you run. For guidance on how to manage eventual consistency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/eventual-consistency.html">Eventual
diff --git a/clients/client-ec2/src/commands/DescribeManagedPrefixListsCommand.ts b/clients/client-ec2/src/commands/DescribeManagedPrefixListsCommand.ts
@@ -29,7 +29,6 @@ export interface DescribeManagedPrefixListsCommandOutput extends DescribeManaged
 
 /**
  * <p>Describes your managed prefix lists and any Amazon Web Services-managed prefix lists.</p>
- *          <p>To view the entries for your prefix list, use <a>GetManagedPrefixListEntries</a>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
diff --git a/clients/client-ec2/src/commands/DescribePrefixListsCommand.ts b/clients/client-ec2/src/commands/DescribePrefixListsCommand.ts
@@ -30,7 +30,6 @@ export interface DescribePrefixListsCommandOutput extends DescribePrefixListsRes
 /**
  * <p>Describes available Amazon Web Services services in a prefix list format, which includes the prefix list
  *             name and prefix list ID of the service and the IP address range for the service.</p>
- *          <p>We recommend that you use <a>DescribeManagedPrefixLists</a> instead.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
diff --git a/clients/client-ec2/src/commands/DescribeRouteTablesCommand.ts b/clients/client-ec2/src/commands/DescribeRouteTablesCommand.ts
@@ -99,6 +99,7 @@ export interface DescribeRouteTablesCommandOutput extends DescribeRouteTablesRes
  * //           VpcPeeringConnectionId: "STRING_VALUE",
  * //           CoreNetworkArn: "STRING_VALUE",
  * //           OdbNetworkArn: "STRING_VALUE",
+ * //           IpAddress: "STRING_VALUE",
  * //         },
  * //       ],
  * //       Tags: [ // TagList
diff --git a/clients/client-ec2/src/commands/DescribeSnapshotsCommand.ts b/clients/client-ec2/src/commands/DescribeSnapshotsCommand.ts
@@ -69,7 +69,6 @@ export interface DescribeSnapshotsCommandOutput extends DescribeSnapshotsResult,
  *         <code>all</code> for public snapshots.</p>
  *          <p>If you are describing a long list of snapshots, we recommend that you paginate the output to make the
  *       list more manageable. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Query-Requests.html#api-pagination">Pagination</a>.</p>
- *          <p>To get the state of fast snapshot restores for a snapshot, use <a>DescribeFastSnapshotRestores</a>.</p>
  *          <p>For more information about EBS snapshots, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-snapshots.html">Amazon EBS snapshots</a> in the <i>Amazon EBS User Guide</i>.</p>
  *          <important>
  *             <p>We strongly recommend using only paginated requests. Unpaginated requests are
diff --git a/clients/client-ec2/src/commands/DescribeVolumeStatusCommand.ts b/clients/client-ec2/src/commands/DescribeVolumeStatusCommand.ts
@@ -56,8 +56,9 @@ export interface DescribeVolumeStatusCommandOutput extends DescribeVolumeStatusR
  *       event. For example, if the status of the volume is <code>impaired</code> and the volume event
  *       shows <code>potential-data-inconsistency</code>, then the action shows
  *         <code>enable-volume-io</code>. This means that you may want to enable the I/O operations for
- *       the volume by calling the <a>EnableVolumeIO</a> action and then check the volume
- *       for data consistency.</p>
+ *       the volume and then check the volume for data consistency. For more information, see
+ *       <a href="https://docs.aws.amazon.com/ebs/latest/userguide/work_volumes_impaired.html">Work with an
+ *         impaired EBS volume</a>.</p>
  *          <p>Volume status is based on the volume status checks, and does not reflect the volume state.
  *       Therefore, volume status does not indicate volumes in the <code>error</code> state (for
  *       example, when a volume is incapable of accepting I/O.)</p>
diff --git a/clients/client-ec2/src/commands/EnableEbsEncryptionByDefaultCommand.ts b/clients/client-ec2/src/commands/EnableEbsEncryptionByDefaultCommand.ts
@@ -35,8 +35,6 @@ export interface EnableEbsEncryptionByDefaultCommandOutput
  *     	always encrypted, either using the default KMS key or the KMS key that you specified
  *       when you created each volume. For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-encryption.html">Amazon EBS encryption</a> in the
  *       <i>Amazon EBS User Guide</i>.</p>
- *          <p>You can specify the default KMS key for encryption by default using <a>ModifyEbsDefaultKmsKeyId</a>
- *       or <a>ResetEbsDefaultKmsKeyId</a>.</p>
  *          <p>Enabling encryption by default has no effect on the encryption status of your
  *       existing volumes.</p>
  *          <p>After you enable encryption by default, you can no longer launch instances
diff --git a/clients/client-ec2/src/commands/EnableFastSnapshotRestoresCommand.ts b/clients/client-ec2/src/commands/EnableFastSnapshotRestoresCommand.ts
@@ -29,9 +29,7 @@ export interface EnableFastSnapshotRestoresCommandOutput extends EnableFastSnaps
 
 /**
  * <p>Enables fast snapshot restores for the specified snapshots in the specified Availability Zones.</p>
- *          <p>You get the full benefit of fast snapshot restores after they enter the <code>enabled</code> state.
- *       To get the current state of fast snapshot restores, use <a>DescribeFastSnapshotRestores</a>.
- *       To disable fast snapshot restores, use <a>DisableFastSnapshotRestores</a>.</p>
+ *          <p>You get the full benefit of fast snapshot restores after they enter the <code>enabled</code> state.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-fast-snapshot-restore.html">Amazon EBS fast snapshot
  *       restore</a> in the <i>Amazon EBS User Guide</i>.</p>
  * @example
diff --git a/clients/client-ec2/src/commands/EnableImageDeregistrationProtectionCommand.ts b/clients/client-ec2/src/commands/EnableImageDeregistrationProtectionCommand.ts
@@ -38,8 +38,7 @@ export interface EnableImageDeregistrationProtectionCommandOutput
 /**
  * <p>Enables deregistration protection for an AMI. When deregistration protection is enabled,
  *       the AMI can't be deregistered.</p>
- *          <p>To allow the AMI to be deregistered, you must first disable deregistration protection
- *       using <a>DisableImageDeregistrationProtection</a>.</p>
+ *          <p>To allow the AMI to be deregistered, you must first disable deregistration protection.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ami-deregistration-protection.html">Protect an
  *       Amazon EC2 AMI from deregistration</a> in the <i>Amazon EC2 User Guide</i>.</p>
  * @example
diff --git a/clients/client-ec2/src/commands/GetEbsDefaultKmsKeyIdCommand.ts b/clients/client-ec2/src/commands/GetEbsDefaultKmsKeyIdCommand.ts
@@ -28,9 +28,7 @@ export interface GetEbsDefaultKmsKeyIdCommandInput extends GetEbsDefaultKmsKeyId
 export interface GetEbsDefaultKmsKeyIdCommandOutput extends GetEbsDefaultKmsKeyIdResult, __MetadataBearer {}
 
 /**
- * <p>Describes the default KMS key for EBS encryption by default for your account in this Region.
- *   		You can change the default KMS key for encryption by default using <a>ModifyEbsDefaultKmsKeyId</a> or
- *       <a>ResetEbsDefaultKmsKeyId</a>.</p>
+ * <p>Describes the default KMS key for EBS encryption by default for your account in this Region.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-encryption.html">Amazon EBS encryption</a>
  *       in the <i>Amazon EBS User Guide</i>.</p>
  * @example
diff --git a/clients/client-ec2/src/commands/ModifyEbsDefaultKmsKeyIdCommand.ts b/clients/client-ec2/src/commands/ModifyEbsDefaultKmsKeyIdCommand.ts
@@ -31,7 +31,7 @@ export interface ModifyEbsDefaultKmsKeyIdCommandOutput extends ModifyEbsDefaultK
  * <p>Changes the default KMS key for EBS encryption by default for your account in this Region.</p>
  *          <p>Amazon Web Services creates a unique Amazon Web Services managed KMS key in each Region for use with encryption by default. If
  *       you change the default KMS key to a symmetric customer managed KMS key, it is used instead of the Amazon Web Services
- *       managed KMS key. To reset the default KMS key to the Amazon Web Services managed KMS key for EBS, use <a>ResetEbsDefaultKmsKeyId</a>. Amazon EBS does not support asymmetric KMS keys.</p>
+ *       managed KMS key. Amazon EBS does not support asymmetric KMS keys.</p>
  *          <p>If you delete or disable the customer managed KMS key that you specified for use with
  *       encryption by default, your instances will fail to launch.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-encryption.html">Amazon EBS encryption</a>
diff --git a/clients/client-ec2/src/commands/MoveAddressToVpcCommand.ts b/clients/client-ec2/src/commands/MoveAddressToVpcCommand.ts
@@ -34,8 +34,7 @@ export interface MoveAddressToVpcCommandOutput extends MoveAddressToVpcResult, _
  *          <p>Moves an Elastic IP address from the EC2-Classic platform to the EC2-VPC platform. The
  *       Elastic IP address must be allocated to your account for more than 24 hours, and it must not
  *       be associated with an instance. After the Elastic IP address is moved, it is no longer
- *       available for use in the EC2-Classic platform, unless you move it back using the
- *         <a>RestoreAddressToClassic</a> request. You cannot move an Elastic IP address that was
+ *       available for use in the EC2-Classic platform. You cannot move an Elastic IP address that was
  *       originally allocated for use in the EC2-VPC platform to the EC2-Classic platform.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
diff --git a/clients/client-ec2/src/commands/ProvisionByoipCidrCommand.ts b/clients/client-ec2/src/commands/ProvisionByoipCidrCommand.ts
@@ -30,16 +30,14 @@ export interface ProvisionByoipCidrCommandOutput extends ProvisionByoipCidrResul
 /**
  * <p>Provisions an IPv4 or IPv6 address range for use with your Amazon Web Services resources through bring your own IP
  *          addresses (BYOIP) and creates a corresponding address pool. After the address range is
- *          provisioned, it is ready to be advertised using <a>AdvertiseByoipCidr</a>.</p>
+ *          provisioned, it is ready to be advertised.</p>
  *          <p>Amazon Web Services verifies that you own the address range and are authorized to advertise it.
  *          You must ensure that the address range is registered to you and that you created an
  *          RPKI ROA to authorize Amazon ASNs 16509 and 14618 to advertise the address range.
  *          For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-byoip.html">Bring your own IP addresses (BYOIP)</a> in the <i>Amazon EC2 User Guide</i>.</p>
  *          <p>Provisioning an address range is an asynchronous operation, so the call returns immediately,
  *          but the address range is not ready to use until its status changes from <code>pending-provision</code>
- *          to <code>provisioned</code>. To monitor the status of an address range, use <a>DescribeByoipCidrs</a>.
- *          To allocate an Elastic IP address from your IPv4 address pool, use <a>AllocateAddress</a>
- *          with either the specific address from the address pool or the ID of the address pool.</p>
+ *           to <code>provisioned</code>. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/byoip-onboard.html">Onboard your address range</a>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
diff --git a/clients/client-ec2/src/commands/RegisterImageCommand.ts b/clients/client-ec2/src/commands/RegisterImageCommand.ts
@@ -32,12 +32,6 @@ export interface RegisterImageCommandOutput extends RegisterImageResult, __Metad
  *       is the final step in the creation process. For more information about creating AMIs, see
  *         <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/creating-an-ami-ebs.html#creating-launching-ami-from-snapshot">Create an AMI from a snapshot</a> and <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/creating-an-ami-instance-store.html">Create an instance-store
  *         backed AMI</a> in the <i>Amazon EC2 User Guide</i>.</p>
- *          <note>
- *             <p>For Amazon EBS-backed instances, <a>CreateImage</a> creates and registers the AMI
- *         in a single request, so you don't have to register the AMI yourself. We recommend that you
- *         always use <a>CreateImage</a> unless you have a specific reason to use
- *         RegisterImage.</p>
- *          </note>
  *          <p>If needed, you can deregister an AMI at any time. Any modifications you make to an AMI
  *       backed by an instance store volume invalidates its registration. If you make changes to an
  *       image, deregister the previous image and register the new image.</p>
@@ -63,12 +57,13 @@ export interface RegisterImageCommandOutput extends RegisterImageResult, __Metad
  *       verify if the correct billing information was applied, check the <code>PlatformDetails</code>
  *       field on the new AMI. If the field is empty or doesn't match the expected operating system
  *       code (for example, Windows, RedHat, SUSE, or SQL), the AMI creation was unsuccessful, and you
- *       should discard the AMI and instead create the AMI from an instance using <a>CreateImage</a>. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/creating-an-ami-ebs.html#how-to-create-ebs-ami">Create an AMI
+ *       should discard the AMI and instead create the AMI from an instance.
+ *         For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/creating-an-ami-ebs.html#how-to-create-ebs-ami">Create an AMI
  *         from an instance </a> in the <i>Amazon EC2 User Guide</i>.</p>
  *          <p>If you purchase a Reserved Instance to apply to an On-Demand Instance that was launched
  *       from an AMI with a billing product code, make sure that the Reserved Instance has the matching
  *       billing product code. If you purchase a Reserved Instance without the matching billing product
- *       code, the Reserved Instance will not be applied to the On-Demand Instance. For information
+ *       code, the Reserved Instance is not applied to the On-Demand Instance. For information
  *       about how to obtain the platform details and billing information of an AMI, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ami-billing-info.html">Understand AMI
  *         billing information</a> in the <i>Amazon EC2 User Guide</i>.</p>
  * @example
diff --git a/clients/client-ec2/src/commands/ReleaseAddressCommand.ts b/clients/client-ec2/src/commands/ReleaseAddressCommand.ts
@@ -30,16 +30,16 @@ export interface ReleaseAddressCommandOutput extends __MetadataBearer {}
 /**
  * <p>Releases the specified Elastic IP address.</p>
  *          <p>[Default VPC] Releasing an Elastic IP address automatically disassociates it
- * 				from any instance that it's associated with. To disassociate an Elastic IP address without
- * 				releasing it, use <a>DisassociateAddress</a>.</p>
- *          <p>[Nondefault VPC] You must use <a>DisassociateAddress</a> to disassociate the Elastic IP address
+ * 				from any instance that it's associated with. Alternatively, you can disassociate an Elastic IP address without
+ * 				releasing it.</p>
+ *          <p>[Nondefault VPC] You must disassociate the Elastic IP address
  * 			  before you can release it. Otherwise, Amazon EC2 returns an error (<code>InvalidIPAddress.InUse</code>).</p>
  *          <p>After releasing an Elastic IP address, it is released to the IP address pool.
  *         Be sure to update your DNS records and any servers or devices that communicate with the address.
  *         If you attempt to release an Elastic IP address that you already released, you'll get an
  *        <code>AuthFailure</code> error if the address is already allocated to another Amazon Web Services account.</p>
  *          <p>After you release an Elastic IP address, you might be able to recover it.
- *         For more information, see <a>AllocateAddress</a>.</p>
+ *        For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-instance-addressing-eips-releasing.html">Release an Elastic IP address</a>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
diff --git a/clients/client-ec2/src/models/models_1.ts b/clients/client-ec2/src/models/models_1.ts
@@ -8226,7 +8226,7 @@ export interface CreateImageRequest {
    *                <p>You can't modify the encryption status of existing volumes or snapshots. To create an
    *           AMI with volumes or snapshots that have a different encryption status (for example, where
    *           the source volume and snapshots are unencrypted, and you want to create an AMI with
-   *           encrypted volumes or snapshots), use the <a>CopyImage</a> action.</p>
+   *           encrypted volumes or snapshots), copy the image instead.</p>
    *             </li>
    *             <li>
    *                <p>The only option that can be changed for existing mappings or snapshots is
diff --git a/clients/client-ec2/src/models/models_2.ts b/clients/client-ec2/src/models/models_2.ts
@@ -5353,6 +5353,13 @@ export interface Route {
    * @public
    */
   OdbNetworkArn?: string | undefined;
+
+  /**
+   * <p>The next hop IP address for routes propagated by VPC Route
+   *             Server into VPC route tables.</p>
+   * @public
+   */
+  IpAddress?: string | undefined;
 }
 
 /**
@@ -5727,8 +5734,8 @@ export interface Snapshot {
   SnapshotId?: string | undefined;
 
   /**
-   * <p>The ID of the volume that was used to create the snapshot. Snapshots created by the <a>CopySnapshot</a> action have an arbitrary volume ID that should not be used for any
-   *       purpose.</p>
+   * <p>The ID of the volume that was used to create the snapshot. Snapshots created by a copy
+   *       snapshot operation have an arbitrary volume ID that you should not use for any purpose.</p>
    * @public
    */
   VolumeId?: string | undefined;
diff --git a/clients/client-ec2/src/models/models_4.ts b/clients/client-ec2/src/models/models_4.ts
diff --git a/clients/client-ec2/src/protocols/Aws_ec2.ts b/clients/client-ec2/src/protocols/Aws_ec2.ts
diff --git a/codegen/sdk-codegen/aws-models/ec2.json b/codegen/sdk-codegen/aws-models/ec2.json
