values.yaml

# Default values for Traefik
image:
  name: traefik
  # defaults to appVersion
  tag: ""
  pullPolicy: IfNotPresent

#
# Configure integration with Traefik Hub
#
hub:
  ## Enabling Hub will:
  # * enable Traefik Hub integration on Traefik
  # * add `traefikhub-tunl` endpoint
  # * enable addRoutersLabels on prometheus metrics
  # * enable allowExternalNameServices on KubernetesIngress provider
  # * enable allowCrossNamespace on KubernetesCRD provider
  # * add an internal (ClusterIP) Service, dedicated for Traefik Hub
  enabled: false
  ## Default port can be changed
  # tunnelPort: 9901
  ## TLS is optional. Insecure is mutually exclusive with any other options
  # tls:
  #   insecure: false
  #   ca: "/path/to/ca.pem"
  #   cert: "/path/to/cert.pem"
  #   key: "/path/to/key.pem"

#
# Configure the deployment
#
deployment:
  enabled: true
  # Can be either Deployment or DaemonSet
  kind: Deployment
  # Number of pods of the deployment (only applies when kind == Deployment)
  replicas: 1
  # Number of old history to retain to allow rollback (If not set, default Kubernetes value is set to 10)
  # revisionHistoryLimit: 1
  # Amount of time (in seconds) before Kubernetes will send the SIGKILL signal if Traefik does not shut down
  terminationGracePeriodSeconds: 60
  # The minimum number of seconds Traefik needs to be up and running before the DaemonSet/Deployment controller considers it available
  minReadySeconds: 0
  # Additional deployment annotations (e.g. for jaeger-operator sidecar injection)
  annotations: {}
  # Additional deployment labels (e.g. for filtering deployment by custom labels)
  labels: {}
  # Additional pod annotations (e.g. for mesh injection or prometheus scraping)
  podAnnotations: {}
  # Additional Pod labels (e.g. for filtering Pod by custom labels)
  podLabels: {}
  # Additional containers (e.g. for metric offloading sidecars)
  additionalContainers: []
    # https://docs.datadoghq.com/developers/dogstatsd/unix_socket/?tab=host
    # - name: socat-proxy
    # image: alpine/socat:1.0.5
    # args: ["-s", "-u", "udp-recv:8125", "unix-sendto:/socket/socket"]
    # volumeMounts:
    #   - name: dsdsocket
    #     mountPath: /socket
  # Additional volumes available for use with initContainers and additionalContainers
  additionalVolumes: []
    # - name: dsdsocket
    #   hostPath:
    #     path: /var/run/statsd-exporter
  # Additional initContainers (e.g. for setting file permission as shown below)
  initContainers: []
    # The "volume-permissions" init container is required if you run into permission issues.
    # Related issue: https://github.com/traefik/traefik/issues/6825
    # - name: volume-permissions
    #   image: busybox:1.35
    #   command: ["sh", "-c", "touch /data/acme.json && chmod -Rv 600 /data/* && chown 65532:65532 /data/acme.json"]
    #   volumeMounts:
    #     - name: data
    #       mountPath: /data
  # Use process namespace sharing
  shareProcessNamespace: false
  # Custom pod DNS policy. Apply if `hostNetwork: true`
  # dnsPolicy: ClusterFirstWithHostNet
  # Additional imagePullSecrets
  imagePullSecrets: []
    # - name: myRegistryKeySecretName
  # Pod lifecycle actions
  lifecycle: {}
    # preStop:
    #   exec:
    #     command: ["/bin/sh", "-c", "sleep 40"]
    # postStart:
    #   httpGet:
    #     path: /ping
    #     port: 9000
    #     host: localhost
    #     scheme: HTTP

# Pod disruption budget
podDisruptionBudget:
  enabled: false
  # maxUnavailable: 1
  # maxUnavailable: 33%
  # minAvailable: 0
  # minAvailable: 25%

# Create a default IngressClass for Traefik
ingressClass:
  enabled: true
  isDefaultClass: true

# Enable experimental features
experimental:
  plugins:
    enabled: false
  kubernetesGateway:
    enabled: false
    gateway:
      enabled: true
    # certificate:
    #   group: "core"
    #   kind: "Secret"
    #   name: "mysecret"
    # By default, Gateway would be created to the Namespace you are deploying Traefik to.
    # You may create that Gateway in another namespace, setting its name below:
    # namespace: default

# Create an IngressRoute for the dashboard
ingressRoute:
  dashboard:
    enabled: true
    # Additional ingressRoute annotations (e.g. for kubernetes.io/ingress.class)
    annotations: {}
    # Additional ingressRoute labels (e.g. for filtering IngressRoute by custom labels)
    labels: {}
    # Specify the allowed entrypoints to use for the dashboard ingress route, (e.g. traefik, web, websecure).
    # By default, it's using traefik entrypoint, which is not exposed.
    # /!\ Do not expose your dashboard without any protection over the internet /!\
    entryPoints: ["traefik"]

rollingUpdate:
  maxUnavailable: 0
  maxSurge: 1

# Customize liveness and readiness probe values.
readinessProbe:
  failureThreshold: 1
  initialDelaySeconds: 2
  periodSeconds: 10
  successThreshold: 1
  timeoutSeconds: 2

livenessProbe:
  failureThreshold: 3
  initialDelaySeconds: 2
  periodSeconds: 10
  successThreshold: 1
  timeoutSeconds: 2

#
# Configure providers
#
providers:
  kubernetesCRD:
    enabled: true
    allowCrossNamespace: false
    allowExternalNameServices: false
    allowEmptyServices: false
    # ingressClass: traefik-internal
    # labelSelector: environment=production,method=traefik
    namespaces: []
      # - "default"

  kubernetesIngress:
    enabled: true
    allowExternalNameServices: false
    allowEmptyServices: false
    # ingressClass: traefik-internal
    # labelSelector: environment=production,method=traefik
    namespaces: []
      # - "default"
    # IP used for Kubernetes Ingress endpoints
    publishedService:
      enabled: false
      # Published Kubernetes Service to copy status from. Format: namespace/servicename
      # By default this Traefik service
      # pathOverride: ""

#
# Add volumes to the traefik pod. The volume name will be passed to tpl.
# This can be used to mount a cert pair or a configmap that holds a config.toml file.
# After the volume has been mounted, add the configs into traefik by using the `additionalArguments` list below, eg:
# additionalArguments:
# - "--providers.file.filename=/config/dynamic.toml"
# - "--ping"
# - "--ping.entrypoint=web"
volumes: []
# - name: public-cert
#   mountPath: "/certs"
#   type: secret
# - name: '{{ printf "%s-configs" .Release.Name }}'
#   mountPath: "/config"
#   type: configMap

# Additional volumeMounts to add to the Traefik container
additionalVolumeMounts: []
  # For instance when using a logshipper for access logs
  # - name: traefik-logs
  #   mountPath: /var/log/traefik

# Logs
# https://docs.traefik.io/observability/logs/
logs:
  # Traefik logs concern everything that happens to Traefik itself (startup, configuration, events, shutdown, and so on).
  general:
    # By default, the logs use a text format (common), but you can
    # also ask for the json format in the format option
    # format: json
    # By default, the level is set to ERROR. Alternative logging levels are DEBUG, PANIC, FATAL, ERROR, WARN, and INFO.
    level: ERROR
  access:
    # To enable access logs
    enabled: false
    # By default, logs are written using the Common Log Format (CLF).
    # To write logs in JSON, use json in the format option.
    # If the given format is unsupported, the default (CLF) is used instead.
    # format: json
    # To write the logs in an asynchronous fashion, specify a bufferingSize option.
    # This option represents the number of log lines Traefik will keep in memory before writing
    # them to the selected output. In some cases, this option can greatly help performances.
    # bufferingSize: 100
    # Filtering https://docs.traefik.io/observability/access-logs/#filtering
    filters: {}
      # statuscodes: "200,300-302"
      # retryattempts: true
      # minduration: 10ms
    # Fields
    # https://docs.traefik.io/observability/access-logs/#limiting-the-fieldsincluding-headers
    fields:
      general:
        defaultmode: keep
        names: {}
          # Examples:
          # ClientUsername: drop
      headers:
        defaultmode: drop
        names: {}
          # Examples:
          # User-Agent: redact
          # Authorization: drop
          # Content-Type: keep

metrics:
  # datadog:
  #   address: 127.0.0.1:8125
  # influxdb:
  #   address: localhost:8089
  #   protocol: udp
  prometheus:
    entryPoint: metrics
  #  addRoutersLabels: true
  #  statsd:
  #    address: localhost:8125
##
##  enable optional CRDs for Prometheus Operator
##
  #  serviceMonitor:
  #    additionalLabels:
  #      foo: bar
  #    namespace: "another-namespace"
  #    namespaceSelector: {}
  #    metricRelabelings: []
  #      - sourceLabels: [__name__]
  #        separator: ;
  #        regex: ^fluentd_output_status_buffer_(oldest|newest)_.+
  #        replacement: $1
  #        action: drop
  #    relabelings: []
  #      - sourceLabels: [__meta_kubernetes_pod_node_name]
  #        separator: ;
  #        regex: ^(.*)$
  #        targetLabel: nodename
  #        replacement: $1
  #        action: replace
  #    jobLabel: traefik
  #    scrapeInterval: 30s
  #    scrapeTimeout: 5s
  #    honorLabels: true
  #  prometheusRule:
  #    additionalLabels: {}
  #    namespace: "another-namespace"
  #    rules:
  #      - alert: TraefikDown
  #        expr: up{job="traefik"} == 0
  #        for: 5m
  #        labels:
  #          context: traefik
  #          severity: warning
  #        annotations:
  #          summary: "Traefik Down"
  #          description: "{{ $labels.pod }} on {{ $labels.nodename }} is down"

tracing: {}
  # instana:
  #   localAgentHost: 127.0.0.1
  #   localAgentPort: 42699
  #   logLevel: info
  #   enableAutoProfile: true
  # datadog:
  #   localAgentHostPort: 127.0.0.1:8126
  #   debug: false
  #   globalTag: ""
  #   prioritySampling: false
  # jaeger:
  #   samplingServerURL: http://localhost:5778/sampling
  #   samplingType: const
  #   samplingParam: 1.0
  #   localAgentHostPort: 127.0.0.1:6831
  #   gen128Bit: false
  #   propagation: jaeger
  #   traceContextHeaderName: uber-trace-id
  #   disableAttemptReconnecting: true
  #   collector:
  #      endpoint: ""
  #      user: ""
  #      password: ""
  # zipkin:
  #   httpEndpoint: http://localhost:9411/api/v2/spans
  #   sameSpan: false
  #   id128Bit: true
  #   sampleRate: 1.0
  # haystack:
  #   localAgentHost: 127.0.0.1
  #   localAgentPort: 35000
  #   globalTag: ""
  #   traceIDHeaderName: ""
  #   parentIDHeaderName: ""
  #   spanIDHeaderName: ""
  #   baggagePrefixHeaderName: ""
  # elastic:
  #   serverURL: http://localhost:8200
  #   secretToken: ""
  #   serviceEnvironment: ""

globalArguments:
  - "--global.checknewversion"
  - "--global.sendanonymoususage"

#
# Configure Traefik static configuration
# Additional arguments to be passed at Traefik's binary
# All available options available on https://docs.traefik.io/reference/static-configuration/cli/
## Use curly braces to pass values: `helm install --set="additionalArguments={--providers.kubernetesingress.ingressclass=traefik-internal,--log.level=DEBUG}"`
additionalArguments: []
#  - "--providers.kubernetesingress.ingressclass=traefik-internal"
#  - "--log.level=DEBUG"

# Environment variables to be passed to Traefik's binary
env: []
# - name: SOME_VAR
#   value: some-var-value
# - name: SOME_VAR_FROM_CONFIG_MAP
#   valueFrom:
#     configMapRef:
#       name: configmap-name
#       key: config-key
# - name: SOME_SECRET
#   valueFrom:
#     secretKeyRef:
#       name: secret-name
#       key: secret-key

envFrom: []
# - configMapRef:
#     name: config-map-name
# - secretRef:
#     name: secret-name

# Configure ports
ports:
  # The name of this one can't be changed as it is used for the readiness and
  # liveness probes, but you can adjust its config to your liking
  traefik:
    port: 9000
    # Use hostPort if set.
    # hostPort: 9000
    #
    # Use hostIP if set. If not set, Kubernetes will default to 0.0.0.0, which
    # means it's listening on all your interfaces and all your IPs. You may want
    # to set this value if you need traefik to listen on specific interface
    # only.
    # hostIP: 192.168.100.10

    # Override the liveness/readiness port. This is useful to integrate traefik
    # with an external Load Balancer that performs healthchecks.
    # Default: ports.traefik.port
    # healthchecksPort: 9000

    # Override the liveness/readiness scheme. Useful for getting ping to
    # respond on websecure entryPoint.
    # healthchecksScheme: HTTPS

    # Defines whether the port is exposed if service.type is LoadBalancer or
    # NodePort.
    #
    # You SHOULD NOT expose the traefik port on production deployments.
    # If you want to access it from outside of your cluster,
    # use `kubectl port-forward` or create a secure ingress
    expose: false
    # The exposed port for this service
    exposedPort: 9000
    # The port protocol (TCP/UDP)
    protocol: TCP
  web:
    port: 8000
    # hostPort: 8000
    expose: true
    exposedPort: 80
    # The port protocol (TCP/UDP)
    protocol: TCP
    # Use nodeport if set. This is useful if you have configured Traefik in a
    # LoadBalancer.
    # nodePort: 32080
    # Port Redirections
    # Added in 2.2, you can make permanent redirects via entrypoints.
    # https://docs.traefik.io/routing/entrypoints/#redirection
    # redirectTo: websecure
    #
    # Trust forwarded  headers information (X-Forwarded-*).
    # forwardedHeaders:
    #   trustedIPs: []
    #   insecure: false
    #
    # Enable the Proxy Protocol header parsing for the entry point
    # proxyProtocol:
    #   trustedIPs: []
    #   insecure: false
  websecure:
    port: 8443
    # hostPort: 8443
    expose: true
    exposedPort: 443
    # The port protocol (TCP/UDP)
    protocol: TCP
    # nodePort: 32443
    #
    ## Enable HTTP/3 on the entrypoint
    ## Enabling it will also enable http3 experimental feature
    ## https://doc.traefik.io/traefik/routing/entrypoints/#http3
    ## There are known limitations when trying to listen on same ports for
    ## TCP & UDP (Http3). There is a workaround in this chart using dual Service.
    ## https://github.com/kubernetes/kubernetes/issues/47249#issuecomment-587960741
    http3:
      enabled: false
    # advertisedPort: 4443
    #
    ## Set TLS at the entrypoint
    ## https://doc.traefik.io/traefik/routing/entrypoints/#tls
    tls:
      enabled: true
      # this is the name of a TLSOption definition
      options: ""
      certResolver: ""
      domains: []
      # - main: example.com
      #   sans:
      #     - foo.example.com
      #     - bar.example.com
    #
    # Trust forwarded  headers information (X-Forwarded-*).
    # forwardedHeaders:
    #   trustedIPs: []
    #   insecure: false
    #
    # Enable the Proxy Protocol header parsing for the entry point
    # proxyProtocol:
    #   trustedIPs: []
    #   insecure: false
    #
    # One can apply Middlewares on an entrypoint
    # https://doc.traefik.io/traefik/middlewares/overview/
    # https://doc.traefik.io/traefik/routing/entrypoints/#middlewares
    # /!\ It introduces here a link between your static configuration and your dynamic configuration /!\
    # It follows the provider naming convention: https://doc.traefik.io/traefik/providers/overview/#provider-namespace
    # middlewares:
    #   - namespace-name1@kubernetescrd
    #   - namespace-name2@kubernetescrd
    middlewares: []
  metrics:
    # When using hostNetwork, use another port to avoid conflict with node exporter:
    # https://github.com/prometheus/prometheus/wiki/Default-port-allocations
    port: 9100
    # hostPort: 9100
    # Defines whether the port is exposed if service.type is LoadBalancer or
    # NodePort.
    #
    # You may not want to expose the metrics port on production deployments.
    # If you want to access it from outside of your cluster,
    # use `kubectl port-forward` or create a secure ingress
    expose: false
    # The exposed port for this service
    exposedPort: 9100
    # The port protocol (TCP/UDP)
    protocol: TCP

# TLS Options are created as TLSOption CRDs
# https://doc.traefik.io/traefik/https/tls/#tls-options
# Example:
# tlsOptions:
#   default:
#     sniStrict: true
#     preferServerCipherSuites: true
#   foobar:
#     curvePreferences:
#       - CurveP521
#       - CurveP384
tlsOptions: {}

# TLS Store are created as TLSStore CRDs. This is useful if you want to set a default certificate
# https://doc.traefik.io/traefik/https/tls/#default-certificate
# Example:
# tlsStore:
#   default:
#     defaultCertificate:
#       secretName: tls-cert
tlsStore: {}

# Options for the main traefik service, where the entrypoints traffic comes
# from.
service:
  enabled: true
  ## Single service is using `MixedProtocolLBService` feature gate.
  ## When set to false, it will create two Service, one for TCP and one for UDP.
  single: true
  type: LoadBalancer
  # Additional annotations applied to both TCP and UDP services (e.g. for cloud provider specific config)
  annotations: {}
  # Additional annotations for TCP service only
  annotationsTCP: {}
  # Additional annotations for UDP service only
  annotationsUDP: {}
  # Additional service labels (e.g. for filtering Service by custom labels)
  labels: {}
  # Additional entries here will be added to the service spec.
  # Cannot contain type, selector or ports entries.
  spec: {}
    # externalTrafficPolicy: Cluster
    # loadBalancerIP: "1.2.3.4"
    # clusterIP: "2.3.4.5"
  loadBalancerSourceRanges: []
    # - 192.168.0.1/32
    # - 172.16.0.0/16
  externalIPs: []
    # - 1.2.3.4
  ## One of SingleStack, PreferDualStack, or RequireDualStack.
  # ipFamilyPolicy: SingleStack
  ## List of IP families (e.g. IPv4 and/or IPv6).
  ## ref: https://kubernetes.io/docs/concepts/services-networking/dual-stack/#services
  # ipFamilies:
  #   - IPv4
  #   - IPv6
  ##
  ## An additionnal and optional internal Service.
  ## Same parameters as external Service
  # internal:
  #   type: ClusterIP
  #   # labels: {}
  #   # annotations: {}
  #   # spec: {}
  #   # loadBalancerSourceRanges: []
  #   # externalIPs: []
  #   # ipFamilies: [ "IPv4","IPv6" ]

## Create HorizontalPodAutoscaler object.
##
autoscaling:
  enabled: false
#   minReplicas: 1
#   maxReplicas: 10
#   metrics:
#   - type: Resource
#     resource:
#       name: cpu
#       target:
#         type: Utilization
#         averageUtilization: 60
#   - type: Resource
#     resource:
#       name: memory
#       target:
#         type: Utilization
#         averageUtilization: 60
#   behavior:
#     scaleDown:
#       stabilizationWindowSeconds: 300
#       policies:
#       - type: Pods
#         value: 1
#         periodSeconds: 60

# Enable persistence using Persistent Volume Claims
# ref: http://kubernetes.io/docs/user-guide/persistent-volumes/
# After the pvc has been mounted, add the configs into traefik by using the `additionalArguments` list below, eg:
# additionalArguments:
# - "--certificatesresolvers.le.acme.storage=/data/acme.json"
# It will persist TLS certificates.
persistence:
  enabled: false
  name: data
#  existingClaim: ""
  accessMode: ReadWriteOnce
  size: 128Mi
  # storageClass: ""
  path: /data
  annotations: {}
  # subPath: "" # only mount a subpath of the Volume into the pod

certResolvers: {}
#   letsencrypt:
#     # for challenge options cf. https://doc.traefik.io/traefik/https/acme/
#     email: email@example.com
#     dnsChallenge:
#       # also add the provider's required configuration under env
#       # or expand then from secrets/configmaps with envfrom
#       # cf. https://doc.traefik.io/traefik/https/acme/#providers
#       provider: digitalocean
#       # add futher options for the dns challenge as needed
#       # cf. https://doc.traefik.io/traefik/https/acme/#dnschallenge
#       delayBeforeCheck: 30
#       resolvers:
#         - 1.1.1.1
#         - 8.8.8.8
#     tlsChallenge: true
#     httpChallenge:
#       entryPoint: "web"
#     # match the path to persistence
#     storage: /data/acme.json

# If hostNetwork is true, runs traefik in the host network namespace
# To prevent unschedulabel pods due to port collisions, if hostNetwork=true
# and replicas>1, a pod anti-affinity is recommended and will be set if the
# affinity is left as default.
hostNetwork: false

# Whether Role Based Access Control objects like roles and rolebindings should be created
rbac:
  enabled: true
  # If set to false, installs ClusterRole and ClusterRoleBinding so Traefik can be used across namespaces.
  # If set to true, installs Role and RoleBinding. Providers will only watch target namespace.
  namespaced: false
  # Enable user-facing roles
  # https://kubernetes.io/docs/reference/access-authn-authz/rbac/#user-facing-roles
  # aggregateTo: [ "admin" ]

# Enable to create a PodSecurityPolicy and assign it to the Service Account via RoleBinding or ClusterRoleBinding
podSecurityPolicy:
  enabled: false

# The service account the pods will use to interact with the Kubernetes API
serviceAccount:
  # If set, an existing service account is used
  # If not set, a service account is created automatically using the fullname template
  name: ""

# Additional serviceAccount annotations (e.g. for oidc authentication)
serviceAccountAnnotations: {}

resources: {}
  # requests:
  #   cpu: "100m"
  #   memory: "50Mi"
  # limits:
  #   cpu: "300m"
  #   memory: "150Mi"

# This example pod anti-affinity forces the scheduler to put traefik pods
# on nodes where no other traefik pods are scheduled.
# It should be used when hostNetwork: true to prevent port conflicts
affinity: {}
#  podAntiAffinity:
#    requiredDuringSchedulingIgnoredDuringExecution:
#      - labelSelector:
#          matchLabels:
#            app.kubernetes.io/name: '{{ template "traefik.name" . }}'
#            app.kubernetes.io/instance: '{{ .Release.Name }}-{{ .Release.Namespace }}'
#        topologyKey: kubernetes.io/hostname

nodeSelector: {}
tolerations: []
topologySpreadConstraints: []
# # This example topologySpreadConstraints forces the scheduler to put traefik pods
# # on nodes where no other traefik pods are scheduled.
#  - labelSelector:
#      matchLabels:
#        app: '{{ template "traefik.name" . }}'
#    maxSkew: 1
#    topologyKey: kubernetes.io/hostname
#    whenUnsatisfiable: DoNotSchedule

# Pods can have priority.
# Priority indicates the importance of a Pod relative to other Pods.
priorityClassName: ""

# Set the container security context
# To run the container with ports below 1024 this will need to be adjust to run as root
securityContext:
  capabilities:
    drop: [ALL]
  readOnlyRootFilesystem: true
  runAsGroup: 65532
  runAsNonRoot: true
  runAsUser: 65532

podSecurityContext:
  fsGroup: 65532

#
# Extra objects to deploy (value evaluated as a template)
#
# In some cases, it can avoid the need for additional, extended or adhoc deployments.
# See #595 for more details and traefik/tests/extra.yaml for example.
extraObjects: []