Tuning pressure advance?

[dasb00ter]

I am trying to use this website https://ellis3dp.com/Pressure_Linear_Advance_Tool/lines_method_deprecated/ to tune an sv06 plus that was just klipperized with this github. I am confused about what some of the settings should be. I have attempted to put the correct start gcode? Prusa slicer shows retraction length as NA (retraction speed is 25 mms) I am not sure what to put in alot of these windows. Can somebody help me out?

Edit:
I guess bc the print start macro is expecting alot of info to be passed from the slicer the start gcode errors out. I put something more basic together to hopefully get the ball rolling I could always use a little help though
G90 g28 G92 E0 M190 S60 BED_MESH_PROFILE LOAD=default G1 X0 Y0 Z50 F2000 M109 S215 purge_line G92 E0
I will attach the entire gcode test. Is PA only available in SS and OS?
elegoo_blackpla.zip

[bassamanator]

pa_pattern-0.2to0.45-0.001incr.gcode.txt

• For sure with OSS klipper configuration
• Ellis pattern generator
• 0.2 to 0.45; 0.001 increment
• For the SV06, but should fit without issue on the Plus
• Use a filament where the extrusion multiplier is 1
• Keep your finger on the emergency button in case of collision
• Rename file to .gcode
• 230C filament temp, 60C bed temp