Skip to content

Latest commit

 

History

History
55 lines (46 loc) · 1.87 KB

ToDo.md

File metadata and controls

55 lines (46 loc) · 1.87 KB

To Do

  • README.md

  • fix prudebug

  • AI/README.md - add tidl

  • AI/pru/blinkExternalLED.c Fails every other time on AI due to exporting P9_25

  • AI/pru/shared.c - Using bitflip.c

  • AI/blinkLED.js - Need bonescript mappings for AI

  • AI/analongINSync.js - Where are the analog ins?

  • AI/tidl/classification.tidl.cpp

Plugin

  • fix closing of Introduction.md when other window clicked
  • fix disconnect to vfs server (or lack of reconnect)

Black/0README.md

  • Blink.ino

  • blinky.rb

  • pwmTest.sh

  • shiftout.js

  • Black/0README.md

  • Black/pru/0README.md

  • Black/pru/blinkR30.c - How to config-pin P9_29 pruout

  • Black/pru/bitflip.c - need /dev/uio

PocketBeagle

  • PocketBeagle/pru/ring.pru0.c
  • PocketBeagle/pru/bitflip.c - need /dev/uio
  • PocketBeagle/0README.md
  • PocketBeagle/servoMotor.js - Test
  • PocketBeagle/sensorTag.js - Test
  • PocketBeagle/blinkLED.py - ImportError: No module named Adafruit_BBIO.GPIO
  • PocketBeagle/pushbutton.js - attachInterrupt err = attachInterrupt: requires Epoll module
  • PocketBeagle/input.js - very slow to respond
  • PocketBeagle/input2.js - very slow to respond too
  • Test PocketBeagle/pru/ring.pru0.c

Migration from Bone101 (simple BoneScript + hardware examples)

  • Accelerometer - Don't have one to test
  • hc-sr04 - tested Black/AI
  • i2cTemp - Black only. Needs testing - Doesn't work
  • Joystick - tested Black/AI
  • PIRMotionSensors - tested Black/AI
  • Potentiometer - tested Black/AI
  • rotaryEncoder - tested Black/AI
  • Servo - Figure out PWM on AI
  • Humidity and temp, si7021 - Same interface as BMP085, but gives wrong values
  • Pressure and temperature sensor - BMP085 - tested Black/AI - Needs udev rule - Need delay between new_device and reading values
  • Ultrasonic Sensor - tested Black/AI