Skip to content

Latest commit

 

History

History
415 lines (295 loc) · 18.3 KB

SubmittingPatches-backports.rst

File metadata and controls

415 lines (295 loc) · 18.3 KB

Submitting Patches to Ceph - Backports

Most likely you're reading this because you intend to submit a GitHub pull request ("PR") targeting one of the stable branches ("nautilus", etc.) at https://github.com/ceph/ceph.

Before you open that PR, please read this entire document or, at the very least, the following two sections: General principles and Cherry-picking rules.

To help the people who will review your backport, please state either in the backport PR, or in the backport tracker issue, or in the main branch tracker issue:

  1. what bug is fixed
  2. why this fix is the minimal way to do it
  3. why does this need to be fixed in <release>

The above should be followed especially in cases when the backport could be seen as introducing, into a stable branch, code that is not related to a particular bug or issue.

Rationale: every modification of a stable branch carries a certain risk of introducing a regression. To minimize this risk, backports should be as straightforward and narrowly-targeted as possible. As a stable release series ages, the importance of following these general principles rises.

The following rules, which have been codified from "best practices" developed over years of backporting, apply to the actual backport implementation:

  • all fixes should land in main first
  • commits to stable branches should be cherry-picked from main
  • before starting to cherry-pick a set of commits from main, grep the main git history for the SHA1 of each main commit (using git log --grep) to check for follow-up fixes. Include any follow-up fixes found in the set of commits to be cherry-picked.
  • when backporting a main PR to a stable branch, double-check that the backport PR contains cherry-picks of all of the main PR's commits. If any commit needs to be omitted, declare and explain this in the PR.
  • cherry-picks must be done using git cherry-pick -x
  • if a cherry-pick from main is not feasible and a direct fix is being undertaken, this must be explained
  • the commit message generated by git cherry-pick -x must not be modified, except to add a "Conflicts" section below the "cherry picked from commit ..." line added by git
  • the "Conflicts" section must mention all files where changes had to be made manually (not just conflicts flagged by git)
  • the "Conflicts" section should also describe the manual changes that were made
  • if a change is to be backported to multiple stable branches, a tracker issue is needed, so the backports can be tracked (if a change is only to be backported to the most recent stable branch, a tracker issue is not strictly required)

For more information on tracker issues, see Tracker workflow.

For more information on conflict resolution and writing the "Conflicts" section, see Conflict resolution.

Adhering to these rules will make your backport easier for reviewers to understand. Not adhering to these rules creates additional work for reviewers and may cause your backport PR to be rejected.

What does "all fixes should land in main first" mean? What if I just need to fix the issue in <release>?

As the person fixing the issue, you are required to first check whether the issue exists in main. If it does, then the proper course of action is to create a main branch tracker (see Tracker workflow) and fix the issue in main, first, and only then cherry-pick the fix to the stable branches that have the issue.

If the issue exists in the stable branch, but not in main, there are several possibilities:

  1. it's a regression introduced into the stable branch by a bad backport
  2. the issue was fixed in main by some massive refactoring that cannot be backported
  3. the issue was already fixed in main by a cherry-pickable commit

In cases 1 and 2, it's permissible to fix the issue directly in the most recent stable branch, subject to the rule "if a commit could not be cherry-picked from main, the commit message must explain why that was not possible". Once the fix has landed in the most recent stable branch, it can be cherry-picked to older stable branches from there.

In case 3, the issue should be handled like any other backport - read on.

Any change that is to be backported to multiple stable branches should have an associated tracker issue at https://tracker.ceph.com.

For fixes already merged to main, this may have already been done - see the Fixes: line in the main PR. If the main PR has already been merged and there is no associated main branch tracker issue, you can create a main branch tracker issue and fill in the fields as described below.

This main branch tracker issue should be in the "Bug" or "Feature" trackers of the relevant subproject under the "Ceph" parent project (or in the "Ceph" project itself if none of the subprojects are a good fit). The stable branches to which the main changes are to be cherry-picked should be listed in the "Backport" field. For example:

Backport: mimic, nautilus

Once the PR targeting main is open, add the PR number assigned by GitHub to the tracker issue. For example, if the PR number is 99999:

Pull request ID: 99999

Once the main PR has been merged, after checking that the change really needs to be backported and the Backport field has been populated, change the main branch tracker issue's Status field to "Pending Backport".

Status: Pending Backport

If you do not have sufficient permissions to modify any field of the tracker issue, just add a comment describing what changes you would like to make. Someone with permissions will make the necessary modifications on your behalf.

For straightforward backports, that's all that you (as the developer of the fix) need to do. Volunteers from the Stable Releases and Backports team will proceed to create Backport issues to track the necessary backports and stage the backports by opening GitHub PRs with the cherry-picks. If you don't want to wait, and provided you have sufficient permissions at https://tracker.ceph.com, you can create Backport tracker issues and stage backports yourself. In that case, read on.

To track backporting efforts, "backport tracker issues" can be created from a parent "main branch tracker issue". The main branch tracker issue is described in the previous section, Tracker workflow. This section focuses the backport tracker issue.

Once the entire Tracker workflow has been completed for the main branch tracker issue, issues can be created in the backport tracker issue for tracking the backporting work.

Under ordinary circumstances, the developer who merges the main PR will flag the main branch tracker issue for backport by changing the Status to "Pending Backport", and volunteers from the Stable Releases and Backports team periodically create backport tracker issues by running the backport-create-issue script. They also do the actual backporting. But that does take time and you may not want to wait.

You might be tempted to forge ahead and create the backport issues yourself. Please don't do that - it is difficult (bordering on impossible) to get all the fields correct when creating backport issues manually, and why even try when there is a script that gets it right every time? Setting up the script requires a small up-front time investment. Once that is done, creating backport issues becomes trivial.

The script used to create backport issues is located at src/script/backport-create-issue in the main branch. Though there might be an older version of this script in a stable branch, do not use it. Only use the most recent version from main.

Once you have the script somewhere in your PATH, you can proceed to install the dependencies.

The dependencies are:

  • python3
  • python-redmine

Python 3 should already be present on any recent Linux installation. The second dependency, python-redmine, can be obtained from PyPi:

pip3 install --user python-redmine

Then, try to run the script:

backport-create-issue --help

This should produce a usage message.

Finally, run the script to actually create the Backport issues. For example, if the tracker issue number is 55555:

backport-create-issue --user <tracker_username> --password <tracker_password> 55555

The script needs to know your https://tracker.ceph.com credentials in order to authenticate to Redmine. In lieu of providing your literal username and password on the command line, you could also obtain a REST API key ("My account" -> "API access key"), put it in ~/.redmine_key and run the script like so:

backport-create-issue 55555

Once the Tracker workflow is completed and the backport tracker issue has been created, it's time to open a backport PR. One possibility is to do this manually, while taking care to follow the cherry-picking rules. However, this can result in a backport that is not properly staged. For example, the PR description might not contain a link to the backport tracker issue (a common oversight). You might even forget to update the backport tracker issue.

In the past, much time was lost, and much frustration caused, by the necessity of staging backports manually. Now, fortunately, there is a script available which automates the process and takes away most of the guesswork.

Similar to the case of creating backport tracker issues, staging the actual backport PR and updating the Backport tracker issue is difficult - if not impossible - to get right if you're doing it manually, and quickly becomes tedious if you do it more than once in a long while.

The ceph-backport.sh script automates the entire process of cherry-picking the commits from the main PR, opening the GitHub backport PR, and cross-linking the GitHub backport PR with the correct Backport tracker issue. The script can also be used to good effect if you have already manually prepared the backport branch with the cherry-picks in it.

The script is located at src/script/ceph-backport.sh in the main branch. Though there might be an older version of this script in a stable branch, do not use it. Only use the most recent version from the main branch. To do this from anywhere and from any branch use the following alias that will use the most recent script in upstream/main of your local ceph clone on every call:

alias ceph-backport.sh="bash <(git --git-dir=$pathToCephClone/.git --no-pager show upstream/main:src/script/ceph-backport.sh)"

ceph-backport.sh is just a bash script, so the only dependency is bash itself, but it does need to be run in the top level of a local clone of ceph/ceph.git. A small up-front time investment is required to get the script working in your environment. This is because the script needs to authenticate itself (i.e., as you) in order to use the GitHub and Redmine REST API services.

The script is self-documenting. Just run the script and proceed from there.

Once the script has been set up properly, you can validate the setup like so:

ceph-backport.sh --setup

Once you have this saying "Overall setup is OK", you have two options for staging the backport: either leave everything to the script, or prepare the backport branch yourself and use the script only for creating the PR and updating the Backport tracker issue.

If you prefer to leave everything to the script, just provide the Backport tracker issue number to the script:

ceph-backport.sh 55555

The script will start by creating the backport branch in your local git clone. The script always uses the following format for naming the branch:

wip-<backport_issue_number>-<name_of_stable_branch>

For example, if the Backport tracker issue number is 55555 and it's targeting the stable branch "nautilus", the backport branch would be named:

wip-55555-nautilus

If you prefer to create the backport branch yourself, just do that. Be sure to name the backport branch as described above. (It's a good idea to use this branch naming convention for all your backporting work.) Then, run the script:

ceph-backport.sh 55555

The script will see that the backport branch already exists, and use it.

Once the script hits the first cherry-pick conflict, it will no longer provide any cherry-picking assistance, so in that case it's up to you to resolve the conflict(s) (as described in Conflict resolution) and finish cherry-picking all of the remaining commits. Once you are satisfied that the backport is complete in your local branch, ceph-backport.sh can finish the job of creating the pull request and updating the backport tracker issue. To make that happen, just re-run the script exactly as you did before:

ceph-backport.sh $BACKPORT_TRACKER_ID

The script will detect that it is running from a branch with the same name as the one it would normally create on the first run and continues after the cherry-picking phase.

For a quick reference on CLI, that contains above information, you can run:

ceph-backport.sh --usage

If git reports conflicts, the script will abort to allow you to resolve the conflicts manually.

Once the conflicts are resolved, complete the cherry-pick

git cherry-pick --continue

Git will present a draft commit message with a "Conflicts" section.

Unfortunately, in recent versions of git, the Conflicts section is commented out. Since the Conflicts section is mandatory for Ceph backports that do not apply cleanly, you will need to uncomment the entire "Conflicts" section of the commit message before committing the cherry-pick. You can also include commentary on what the conflicts were and how you resolved them. For example:

Conflicts:
        src/foo/bar.cc
- mimic does not have blatz; use batlo instead

When editing the cherry-pick commit message, leave everything before the "cherry picked from" line unchanged. Any edits you make should be in the part following that line. Here is an example:

osd: check batlo before setting blatz

Setting blatz requires special precautions. Check batlo first.

Fixes: https://tracker.ceph.com/issues/99999
Signed-off-by: Random J Developer <random@developer.example.com>
(cherry picked from commit 01d73020da12f40ccd95ea1e49cfcf663f1a3a75)

Conflicts:
    src/osd/batlo.cc
- add_batlo_check has an extra arg in newer code

Naturally, the Fixes line points to the main issue. You might be tempted to modify it so it points to the backport issue, but - please - don't do that. First, the main issue points to all the backport issues, and second, any editing of the original commit message calls the entire backport into doubt, simply because there is no good reason for such editing.

The part below the (cherry picked from commit ...) line is fair game for editing. If you need to add additional information to the cherry-pick commit message, append that information below this line. Once again: do not modify the original commit message.

If you use ceph-backport.sh for your backport creation (which is recommended), read up at the end of The ceph-backport.sh script on how to continue from here.

Once the backport PR is open, the first order of business is to set the Milestone tag to the stable release the backport PR is targeting. For example, if the PR is targeting "nautilus", set the Milestone tag to "nautilus".

If you don't have sufficient GitHub permissions to set the Milestone, don't worry. Members of the Stable Releases and Backports team periodically run a script (ceph-backport.sh --milestones) which scans all PRs targetting stable branches and automatically adds the correct Milestone tag if it is missing.

Next, check which component label was applied to the main PR corresponding to this backport, and double-check that that label is applied to the backport PR as well. For example, if the main PR carries the component label "core", the backport PR should also get that label.

In general, it is the responsibility of the Stable Releases and Backports team to ensure that backport PRs are properly labelled. If in doubt, just leave the labelling to them.

Once your backport PR is open and the Milestone is set properly, the Stable Releases and Backports team will take care of getting the PR reviewed and tested. Once the PR is reviewed and tested, it will be merged.

If you would like to facilitate this process, you can solicit reviews and run integration tests on the PR. In this case, add comments to the PR describing the tests you ran and their results.

Once the PR has been reviewed and deemed to have undergone sufficient testing, it will be merged. Even if you have sufficient GitHub permissions to merge the PR, please do not merge it yourself. (Uncontrolled merging to stable branches unnecessarily complicates the release preparation process, which is done by volunteers.)

Ceph has a Stable Releases and Backports team, staffed by volunteers, which is charged with maintaining the stable releases and backporting bugfixes from the main branch to them. (That team maintains a wiki, accessible by clicking the Stable Releases and Backports link, which describes various workflows in the backporting lifecycle.)

Ordinarily, it is enough to fill out the "Backport" field in the bug (tracker issue). The volunteers from the Stable Releases and Backports team will backport the fix, run regression tests on it, and include it in one or more future point releases.