nodediag.sysconfig

# Simple nodediag tests source this file for configuration
# Variables should be named DIAG_<test>_<variable>.
# Tests requiring more complicated configuration can put their own file
# in /etc/sysconfig/nodediag.d
#
# `dmidecode -s processor-frequency`
# 2666 MHz
DIAG_CPUFREQ_MHZ=""

# `dmidecode -s processor-version`
# Intel(R) Xeon(R) CPU W3520 @ 2.67GHz
DIAG_CPU_VERSION=""

# `dmidecode -s baseboard-product-name`
# X8SAX
DIAG_MOTHERPROD_NAME=""

# `dmidecode -s baseboard-version`
# 2.0
DIAG_MOTHERVER_NUM=""

# `dmidecode -s bios-release-date`
# 08/05/2009
DIAG_BIOS_DATE=""

# cat /sys/devices/system/edac/mc/mc*/csrow*/edac_mode
# S4ECD4ED
DIAG_ECC_TYPE=""

# dmidecode -t memory
# 4096
DIAG_MEMORY_TOTAL_MB=""

# dmidecode -t memory
# 333
DIAG_MEMSPEED_MHZ=""

# dmidecode -t memory
# DDR2
DIAG_MEMTYPE_NAME=""

# awk '/SwapTotal:/ { print $2 }' /proc/meminfo
# 6088624
DIAG_SWAP_KB=""

# ethtool <dev>
# eth0
DIAG_ETHERNET_DEV[0]=""
# Optional link details:
# 1000MB/s
# Full
DIAG_ETHERNET_SPEED[0]=""
DIAG_ETHERNET_DUPLEX[0]=""

# ibstat -l
# ibstat <dev> [<port>]
# mlx4_0 1
# 40
DIAG_INFINIBAND_DEV[0]=""
DIAG_INFINIBAND_RATE[0]=""
# optional LinkUp retries (default 0) and retry interval (default 10)
# applies to all ib interfaces
# 4
# 30
DIAG_INFINIBAND_RETRIES=""
DIAG_INFINIBAND_RETRY_SEC=""

# path to block devices for hdparm -t test
# /dev/sda
# 20
DIAG_HDPARM_DEV[0]=""
DIAG_HDPARM_MIN_MBSEC[0]=""

# check firmware on LSI Logic SAS adapter
DIAG_MPTSAS_NUM=""
DIAG_MPTSAS_FW=""
DIAG_MPTSAS_BIOS=""

# check firmware/bios option rom on LSI Logic SAS2 adapter
DIAG_MPT2SAS_NUM=""
DIAG_MPT2SAS_FW=""
DIAG_MPT2SAS_BIOS=""

# check firmware on 3ware card
DIAG_TW_NUM=""
DIAG_TW_FW=""

# see /sys/class/net/*/{speed,mode}
DIAG_NETWORK_DEV[0]=""
DIAG_NETWORK_SPEED[0]=""
DIAG_NETWORK_MODE[0]=""