All OSRM HTTP requests use a common structure.
The following syntax applies to all services, except as noted.
GET /{service}/{version}/{profile}/{coordinates}[.{format}]?option=value&option=value
Parameter | Description |
---|---|
service |
One of the following values: route , nearest , table , match , trip , tile |
version |
Version of the protocol implemented by the service. v1 for all OSRM 5.x installations |
profile |
Mode of transportation, is determined statically by the Lua profile that is used to prepare the data using osrm-extract . Typically car , bike or foot if using one of the supplied profiles. |
coordinates |
String of format {longitude},{latitude};{longitude},{latitude}[;{longitude},{latitude} ...] or polyline({polyline}) or polyline6({polyline6}) . |
format |
Only json is supported at the moment. This parameter is optional and defaults to json . |
Passing any option=value
is optional. polyline
follows Google's polyline format with precision 5 by default and can be generated using this package.
To pass parameters to each location some options support an array like encoding:
Request options
Option | Values | Description |
---|---|---|
bearings | {bearing};{bearing}[;{bearing} ...] |
Limits the search to segments with given bearing in degrees towards true north in clockwise direction. |
radiuses | {radius};{radius}[;{radius} ...] |
Limits the search to given radius in meters. |
generate_hints | true (default), false |
Adds a Hint to the response which can be used in subsequent requests, see hints parameter. |
hints | {hint};{hint}[;{hint} ...] |
Hint from previous request to derive position in street network. |
approaches | {approach};{approach}[;{approach} ...] |
Keep waypoints on curb side. |
exclude | {class}[,{class}] |
Additive list of classes to avoid, order does not matter. |
Where the elements follow the following format:
Element | Values |
---|---|
bearing | {value},{range} integer 0 .. 360,integer 0 .. 180 |
radius | double >= 0 or unlimited (default) |
hint | Base64 string |
approach | curb or unrestricted (default) |
class | A class name determined by the profile or none . |
{option}={element};{element}[;{element} ... ]
The number of elements must match exactly the number of locations (except for generate_hints
and exclude
). If you don't want to pass a value but instead use the default you can pass an empty element
.
Example: 2nd location use the default value for option
:
{option}={element};;{element}
# Query on Berlin with three coordinates:
curl 'http://router.project-osrm.org/route/v1/driving/13.388860,52.517037;13.397634,52.529407;13.428555,52.523219?overview=false'
# Query on Berlin excluding the usage of motorways:
curl 'http://router.project-osrm.org/route/v1/driving/13.388860,52.517037;13.397634,52.529407?exclude=motorway'
# Using polyline:
curl 'http://router.project-osrm.org/route/v1/driving/polyline(ofp_Ik_vpAilAyu@te@g`E)?overview=false'
Every response object has a code
property containing one of the strings below or a service dependent code:
Type | Description |
---|---|
Ok |
Request could be processed as expected. |
InvalidUrl |
URL string is invalid. |
InvalidService |
Service name is invalid. |
InvalidVersion |
Version is not found. |
InvalidOptions |
Options are invalid. |
InvalidQuery |
The query string is synctactically malformed. |
InvalidValue |
The successfully parsed query parameters are invalid. |
NoSegment |
One of the supplied input coordinates could not snap to street segment. |
TooBig |
The request size violates one of the service specific request size restrictions. |
message
is a optional human-readable error message. All other status types are service dependent.- In case of an error the HTTP status code will be
400
. Otherwise the HTTP status code will be200
andcode
will beOk
.
{
"code": "Ok",
"message": "Everything worked"
}
Snaps a coordinate to the street network and returns the nearest n
matches.
GET http://{server}/nearest/v1/{profile}/{coordinates}.json?number={number}
Where coordinates
only supports a single {longitude},{latitude}
entry.
In addition to the general options the following options are supported for this service:
Option | Values | Description |
---|---|---|
number | integer >= 1 (default 1 ) |
Number of nearest segments that should be returned. |
Response
code
if the request was successfulOk
otherwise see the service dependent and general status codes.waypoints
array ofWaypoint
objects sorted by distance to the input coordinate. Each object has at least the following additional properties:nodes
: Array of OpenStreetMap node ids.
# Querying nearest three snapped locations of `13.388860,52.517037` with a bearing between `20° - 340°`.
curl 'http://router.project-osrm.org/nearest/v1/driving/13.388860,52.517037?number=3&bearings=0,20'
{
"waypoints" : [
{
"nodes": [
2264199819,
0
],
"hint" : "KSoKADRYroqUBAEAEAAAABkAAAAGAAAAAAAAABhnCQCLtwAA_0vMAKlYIQM8TMwArVghAwEAAQH1a66g",
"distance" : 4.152629,
"name" : "Friedrichstraße",
"location" : [
13.388799,
52.517033
]
},
{
"nodes": [
2045820592,
0
],
"hint" : "KSoKADRYroqUBAEABgAAAAAAAAAAAAAAKQAAABhnCQCLtwAA7kvMAAxZIQM8TMwArVghAwAAAQH1a66g",
"distance" : 11.811961,
"name" : "Friedrichstraße",
"location" : [
13.388782,
52.517132
]
},
{
"nodes": [
0,
21487242
],
"hint" : "KioKgDbbDgCUBAEAAAAAABoAAAAAAAAAPAAAABlnCQCLtwAA50vMADJZIQM8TMwArVghAwAAAQH1a66g",
"distance" : 15.872438,
"name" : "Friedrichstraße",
"location" : [
13.388775,
52.51717
],
}
],
"code" : "Ok"
}
Finds the fastest route between coordinates in the supplied order.
GET /route/v1/{profile}/{coordinates}?alternatives={true|false|number}&steps={true|false}&geometries={polyline|polyline6|geojson}&overview={full|simplified|false}&annotations={true|false}
In addition to the general options the following options are supported for this service:
Option | Values | Description |
---|---|---|
alternatives | true , false (default), or Number |
Search for alternative routes. Passing a number alternatives=n searches for up to n alternative routes.* |
steps | true , false (default) |
Returned route steps for each route leg |
annotations | true , false (default), nodes , distance , duration , datasources , weight , speed |
Returns additional metadata for each coordinate along the route geometry. |
geometries | polyline (default), polyline6 , geojson |
Returned route geometry format (influences overview and per step) |
overview | simplified (default), full , false |
Add overview geometry either full, simplified according to highest zoom level it could be display on, or not at all. |
continue_straight | default (default), true , false |
Forces the route to keep going straight at waypoints constraining uturns there even if it would be faster. Default value depends on the profile. |
* Please note that even if alternative routes are requested, a result cannot be guaranteed.
Response
code
if the request was successfulOk
otherwise see the service dependent and general status codes.waypoints
: Array ofWaypoint
objects representing all waypoints in order:routes
: An array ofRoute
objects, ordered by descending recommendation rank.
In case of error the following code
s are supported in addition to the general ones:
Type | Description |
---|---|
NoRoute |
No route found. |
All other properties might be undefined.
# Query on Berlin with three coordinates and no overview geometry returned:
curl 'http://router.project-osrm.org/route/v1/driving/13.388860,52.517037;13.397634,52.529407;13.428555,52.523219?overview=false'
Computes the duration of the fastest route between all pairs of supplied coordinates. Returns the durations or distances or both between the coordinate pairs. Note that the distances are not the shortest distance between two coordinates, but rather the distances of the fastest routes. Duration is in seconds and distances is in meters.
GET /table/v1/{profile}/{coordinates}?{sources}=[{elem}...];&{destinations}=[{elem}...]&annotations={duration|distance|duration,distance}
Options
In addition to the general options the following options are supported for this service:
Option | Values | Description |
---|---|---|
sources | {index};{index}[;{index} ...] or all (default) |
Use location with given index as source. |
destinations | {index};{index}[;{index} ...] or all (default) |
Use location with given index as destination. |
annotations | duration (default), distance , or duration,distance |
Return the requested table or tables in response. Note that computing the distances table is currently only implemented for CH. If annotations=distance or annotations=duration,distance is requested when running a MLD router, a NotImplemented error will be returned. |
fallback_speed | double > 0 |
If no route found between a source/destination pair, calculate the as-the-crow-flies distance, then use this speed to estimate duration. |
fallback_coordinate | input (default), or snapped |
When using a fallback_speed , use the user-supplied coordinate (input ), or the snapped location (snapped ) for calculating distances. |
Unlike other array encoded options, the length of sources
and destinations
can be smaller or equal
to number of input locations;
Example:
sources=0;5;7&destinations=5;1;4;2;3;6
Element | Values |
---|---|
index | 0 <= integer < #locations |
# Returns a 3x3 duration matrix:
curl 'http://router.project-osrm.org/table/v1/driving/13.388860,52.517037;13.397634,52.529407;13.428555,52.523219'
# Returns a 1x3 duration matrix
curl 'http://router.project-osrm.org/table/v1/driving/13.388860,52.517037;13.397634,52.529407;13.428555,52.523219?sources=0'
# Returns a asymmetric 3x2 duration matrix with from the polyline encoded locations `qikdcB}~dpXkkHz`:
curl 'http://router.project-osrm.org/table/v1/driving/polyline(egs_Iq_aqAppHzbHulFzeMe`EuvKpnCglA)?sources=0;1;3&destinations=2;4'
# Returns a 3x3 duration matrix:
curl 'http://router.project-osrm.org/table/v1/driving/13.388860,52.517037;13.397634,52.529407;13.428555,52.523219?annotations=duration'
# Returns a 3x3 distance matrix for CH:
curl 'http://router.project-osrm.org/table/v1/driving/13.388860,52.517037;13.397634,52.529407;13.428555,52.523219?annotations=distance'
# Returns a 3x3 duration matrix and a 3x3 distance matrix for CH:
curl 'http://router.project-osrm.org/table/v1/driving/13.388860,52.517037;13.397634,52.529407;13.428555,52.523219?annotations=distance,duration'
Response
code
if the request was successfulOk
otherwise see the service dependent and general status codes.durations
array of arrays that stores the matrix in row-major order.durations[i][j]
gives the travel time from the i-th waypoint to the j-th waypoint. Values are given in seconds. Can benull
if no route betweeni
andj
can be found.distances
array of arrays that stores the matrix in row-major order.distances[i][j]
gives the travel distance from the i-th waypoint to the j-th waypoint. Values are given in meters. Can benull
if no route betweeni
andj
can be found. Note that computing thedistances
table is currently only implemented for CH. Ifannotations=distance
orannotations=duration,distance
is requested when running a MLD router, aNotImplemented
error will be returned.sources
array ofWaypoint
objects describing all sources in orderdestinations
array ofWaypoint
objects describing all destinations in order
In case of error the following code
s are supported in addition to the general ones:
Type | Description |
---|---|
NoTable |
No route found. |
NotImplemented |
This request is not supported |
All other properties might be undefined.
{
"sources": [
{
"location": [
13.3888,
52.517033
],
"hint": "PAMAgEVJAoAUAAAAIAAAAAcAAAAAAAAArss0Qa7LNEHiVIRA4lSEQAoAAAAQAAAABAAAAAAAAADMAAAAAEzMAKlYIQM8TMwArVghAwEA3wps52D3",
"name": "Friedrichstraße"
},
{
"location": [
13.397631,
52.529432
],
"hint": "WIQBgL6mAoAEAAAABgAAAAAAAAA7AAAAhU6PQHvHj0IAAAAAQbyYQgQAAAAGAAAAAAAAADsAAADMAAAAf27MABiJIQOCbswA_4ghAwAAXwVs52D3",
"name": "Torstraße"
},
{
"location": [
13.428554,
52.523239
],
"hint": "7UcAgP___38fAAAAUQAAACYAAABTAAAAhSQKQrXq5kKRbiZCWJo_Qx8AAABRAAAAJgAAAFMAAADMAAAASufMAOdwIQNL58wA03AhAwMAvxBs52D3",
"name": "Platz der Vereinten Nationen"
}
],
"durations": [
[
0,
192.6,
382.8
],
[
199,
0,
283.9
],
[
344.7,
222.3,
0
]
],
"destinations": [
{
"location": [
13.3888,
52.517033
],
"hint": "PAMAgEVJAoAUAAAAIAAAAAcAAAAAAAAArss0Qa7LNEHiVIRA4lSEQAoAAAAQAAAABAAAAAAAAADMAAAAAEzMAKlYIQM8TMwArVghAwEA3wps52D3",
"name": "Friedrichstraße"
},
{
"location": [
13.397631,
52.529432
],
"hint": "WIQBgL6mAoAEAAAABgAAAAAAAAA7AAAAhU6PQHvHj0IAAAAAQbyYQgQAAAAGAAAAAAAAADsAAADMAAAAf27MABiJIQOCbswA_4ghAwAAXwVs52D3",
"name": "Torstraße"
},
{
"location": [
13.428554,
52.523239
],
"hint": "7UcAgP___38fAAAAUQAAACYAAABTAAAAhSQKQrXq5kKRbiZCWJo_Qx8AAABRAAAAJgAAAFMAAADMAAAASufMAOdwIQNL58wA03AhAwMAvxBs52D3",
"name": "Platz der Vereinten Nationen"
}
],
"code": "Ok",
"distances": [
[
0,
1886.89,
3791.3
],
[
1824,
0,
2838.09
],
[
3275.36,
2361.73,
0
]
]
}
Map matching matches/snaps given GPS points to the road network in the most plausible way. Please note the request might result multiple sub-traces. Large jumps in the timestamps (> 60s) or improbable transitions lead to trace splits if a complete matching could not be found. The algorithm might not be able to match all points. Outliers are removed if they can not be matched successfully.
GET /match/v1/{profile}/{coordinates}?steps={true|false}&geometries={polyline|polyline6|geojson}&overview={simplified|full|false}&annotations={true|false}
In addition to the general options the following options are supported for this service:
Option | Values | Description |
---|---|---|
steps | true , false (default) |
Returned route steps for each route |
geometries | polyline (default), polyline6 , geojson |
Returned route geometry format (influences overview and per step) |
annotations | true , false (default), nodes , distance , duration , datasources , weight , speed |
Returns additional metadata for each coordinate along the route geometry. |
overview | simplified (default), full , false |
Add overview geometry either full, simplified according to highest zoom level it could be display on, or not at all. |
timestamps | {timestamp};{timestamp}[;{timestamp} ...] |
Timestamps for the input locations in seconds since UNIX epoch. Timestamps need to be monotonically increasing. |
radiuses | {radius};{radius}[;{radius} ...] |
Standard deviation of GPS precision used for map matching. If applicable use GPS accuracy. |
gaps | split (default), ignore |
Allows the input track splitting based on huge timestamp gaps between points. |
tidy | true , false (default) |
Allows the input track modification to obtain better matching quality for noisy tracks. |
waypoints | {index};{index};{index}... |
Treats input coordinates indicated by given indices as waypoints in returned Match object. Default is to treat all input coordinates as waypoints. |
Parameter | Values |
---|---|
timestamp | integer seconds since UNIX epoch |
radius | double >= 0 (default 5m) |
The radius for each point should be the standard error of the location measured in meters from the true location.
Use Location.getAccuracy()
on Android or CLLocation.horizontalAccuracy
on iOS.
This value is used to determine which points should be considered as candidates (larger radius means more candidates) and how likely each candidate is (larger radius means far-away candidates are penalized less).
The area to search is chosen such that the correct candidate should be considered 99.9% of the time (for more details see this ticket).
Response
code
if the request was successfulOk
otherwise see the service dependent and general status codes.tracepoints
: Array ofWaypoint
objects representing all points of the trace in order. If the trace point was ommited by map matching because it is an outlier, the entry will benull
. EachWaypoint
object has the following additional properties:matchings_index
: Index to theRoute
object inmatchings
the sub-trace was matched to.waypoint_index
: Index of the waypoint inside the matched route.alternatives_count
: Number of probable alternative matchings for this trace point. A value of zero indicate that this point was matched unambiguously. Split the trace at these points for incremental map matching.
matchings
: An array ofRoute
objects that assemble the trace. EachRoute
object has the following additional properties:confidence
: Confidence of the matching.float
value between 0 and 1. 1 is very confident that the matching is correct.
In case of error the following code
s are supported in addition to the general ones:
Type | Description |
---|---|
NoMatch |
No matchings found. |
All other properties might be undefined.
The trip plugin solves the Traveling Salesman Problem using a greedy heuristic (farthest-insertion algorithm) for 10 or more waypoints and uses brute force for less than 10 waypoints. The returned path does not have to be the fastest path. As TSP is NP-hard it only returns an approximation. Note that all input coordinates have to be connected for the trip service to work.
GET /trip/v1/{profile}/{coordinates}?roundtrip={true|false}&source{any|first}&destination{any|last}&steps={true|false}&geometries={polyline|polyline6|geojson}&overview={simplified|full|false}&annotations={true|false}'
In addition to the general options the following options are supported for this service:
Option | Values | Description |
---|---|---|
roundtrip | true (default), false |
Returned route is a roundtrip (route returns to first location) |
source | any (default), first |
Returned route starts at any or first coordinate |
destination | any (default), last |
Returned route ends at any or last coordinate |
steps | true , false (default) |
Returned route instructions for each trip |
annotations | true , false (default), nodes , distance , duration , datasources , weight , speed |
Returns additional metadata for each coordinate along the route geometry. |
geometries | polyline (default), polyline6 , geojson |
Returned route geometry format (influences overview and per step) |
overview | simplified (default), full , false |
Add overview geometry either full, simplified according to highest zoom level it could be display on, or not at all. |
Fixing Start and End Points
It is possible to explicitely set the start or end coordinate of the trip.
When source is set to first
, the first coordinate is used as start coordinate of the trip in the output. When destination is set to last
, the last coordinate will be used as destination of the trip in the returned output. If you specify any
, any of the coordinates can be used as the first or last coordinate in the output.
However, if source=any&destination=any
the returned round-trip will still start at the first input coordinate by default.
Currently, not all combinations of roundtrip
, source
and destination
are supported.
Right now, the following combinations are possible:
roundtrip | source | destination | supported |
---|---|---|---|
true | first | last | yes |
true | first | any | yes |
true | any | last | yes |
true | any | any | yes |
false | first | last | yes |
false | first | any | no |
false | any | last | no |
false | any | any | no |
# Round trip in Berlin with three stops:
curl 'http://router.project-osrm.org/trip/v1/driving/13.388860,52.517037;13.397634,52.529407;13.428555,52.523219'
# Round trip in Berlin with four stops, starting at the first stop, ending at the last:
curl 'http://router.project-osrm.org/trip/v1/driving/13.388860,52.517037;13.397634,52.529407;13.428555,52.523219;13.418555,52.523215?source=first&destination=last'
code
: if the request was successfulOk
otherwise see the service dependent and general status codes.waypoints
: Array ofWaypoint
objects representing all waypoints in input order. EachWaypoint
object has the following additional properties:trips_index
: Index totrips
of the sub-trip the point was matched to.waypoint_index
: Index of the point in the trip.
trips
: An array ofRoute
objects that assemble the trace.
In case of error the following code
s are supported in addition to the general ones:
Type | Description |
---|---|
NoTrips |
No trips found because input coordinates are not connected. |
NotImplemented |
This request is not supported |
All other properties might be undefined.
This service generates Mapbox Vector Tiles that can be viewed with a vector-tile capable slippy-map viewer. The tiles contain road geometries and metadata that can be used to examine the routing graph. The tiles are generated directly from the data in-memory, so are in sync with actual routing results, and let you examine which roads are actually routable, and what weights they have applied.
GET /tile/v1/{profile}/tile({x},{y},{zoom}).mvt
The x
, y
, and zoom
values are the same as described at https://wiki.openstreetmap.org/wiki/Slippy_map_tilenames, and are supported by vector tile viewers like Mapbox GL JS.
# This fetches a Z=13 tile for downtown San Francisco:
curl 'http://router.project-osrm.org/tile/v1/car/tile(1310,3166,13).mvt'
The response object is either a binary encoded blob with a Content-Type
of application/x-protobuf
, or a 404
error. Note that OSRM is hard-coded to only return tiles from zoom level 12 and higher (to avoid accidentally returning extremely large vector tiles).
Vector tiles contain two layers:
speeds
layer:
Property | Type | Description |
---|---|---|
speed |
integer |
the speed on that road segment, in km/h |
is_small |
boolean |
whether this segment belongs to a small (< 1000 node) strongly connected component |
datasource |
string |
the source for the speed value (normally lua profile unless you're using the traffic update feature, in which case it contains the stem of the filename that supplied the speed value for this segment |
duration |
float |
how long this segment takes to traverse, in seconds. This value is to calculate the total route ETA. |
weight |
integer |
how long this segment takes to traverse, in units (may differ from duration when artificial biasing is applied in the Lua profiles). ACTUAL ROUTING USES THIS VALUE. |
name |
string |
the name of the road this segment belongs to |
rate |
float |
the value of length/weight - analagous to speed , but using the weight value rather than duration , rounded to the nearest integer |
turns
layer:
Property | Type | Description |
---|---|---|
bearing_in |
integer |
the absolute bearing that approaches the intersection. -180 to +180, 0 = North, 90 = East |
turn_angle |
integer |
the angle of the turn, relative to the bearing_in . -180 to +180, 0 = straight ahead, 90 = 90-degrees to the right |
cost |
float |
the time we think it takes to make that turn, in seconds. May be negative, depending on how the data model is constructed (some turns get a "bonus"). |
weight |
float |
the weight we think it takes to make that turn. May be negative, depending on how the data model is constructed (some turns get a "bonus"). ACTUAL ROUTING USES THIS VALUE |
type |
string |
the type of this turn - values like turn , continue , etc. See the StepManeuver for a partial list, this field also exposes internal turn types that are never returned with an API response |
modifier |
string |
the direction modifier of the turn (left , sharp left , etc) |
Represents a route through (potentially multiple) waypoints.
Properties
distance
: The distance traveled by the route, infloat
meters.duration
: The estimated travel time, infloat
number of seconds.geometry
: The whole geometry of the route value depending onoverview
parameter, format depending on thegeometries
parameter. SeeRouteStep
'sgeometry
property for a parameter documentation.weight
: The calculated weight of the route.weight_name
: The name of the weight profile used during extraction phase.
overview | Description |
---|---|
simplified | Geometry is simplified according to the highest zoom level it can still be displayed on full. |
full | Geometry is not simplified. |
false | Geometry is not added. |
legs
: The legs between the given waypoints, an array ofRouteLeg
objects.
Three input coordinates, geometry=geojson
, steps=false
:
{
"distance": 90.0,
"duration": 300.0,
"weight": 300.0,
"weight_name": "duration",
"geometry": {"type": "LineString", "coordinates": [[120.0, 10.0], [120.1, 10.0], [120.2, 10.0], [120.3, 10.0]]},
"legs": [
{
"distance": 30.0,
"duration": 100.0,
"steps": []
},
{
"distance": 60.0,
"duration": 200.0,
"steps": []
}
]
}
Represents a route between two waypoints.
Properties
distance
: The distance traveled by this route leg, infloat
meters.duration
: The estimated travel time, infloat
number of seconds.weight
: The calculated weight of the route leg.summary
: Summary of the route taken asstring
. Depends on thesummary
parameter:
summary | |
---|---|
true | Names of the two major roads used. Can be empty if route is too short. |
false | empty string |
steps
: Depends on thesteps
parameter.
steps | |
---|---|
true | array of RouteStep objects describing the turn-by-turn instructions |
false | empty array |
annotation
: Additional details about each coordinate along the route geometry:
annotations | |
---|---|
true | An Annotation object containing node ids, durations, distances and weights. |
false | undefined |
With steps=false
and annotations=true
:
{
"distance": 30.0,
"duration": 100.0,
"weight": 100.0,
"steps": [],
"annotation": {
"distance": [5,5,10,5,5],
"duration": [15,15,40,15,15],
"datasources": [1,0,0,0,1],
"metadata": { "datasource_names": ["traffic","lua profile","lua profile","lua profile","traffic"] },
"nodes": [49772551,49772552,49786799,49786800,49786801,49786802],
"speed": [0.3, 0.3, 0.3, 0.3, 0.3]
}
}
Annotation of the whole route leg with fine-grained information about each segment or node id.
Properties
distance
: The distance, in metres, between each pair of coordinatesduration
: The duration between each pair of coordinates, in seconds. Does not include the duration of any turns.datasources
: The index of the datasource for the speed between each pair of coordinates.0
is the default profile, other values are supplied via--segment-speed-file
toosrm-contract
orosrm-customize
. String-like names are in themetadata.datasource_names
array.nodes
: The OSM node ID for each coordinate along the route, excluding the first/last user-supplied coordinatesweight
: The weights between each pair of coordinates. Does not include any turn costs.speed
: Convenience field, calculation ofdistance / duration
rounded to one decimal placemetadata
: Metadata related to other annotationsdatasource_names
: The names of the datasources used for the speed between each pair of coordinates.lua profile
is the default profile, other values arethe filenames supplied via--segment-speed-file
toosrm-contract
orosrm-customize
{
"distance": [5,5,10,5,5],
"duration": [15,15,40,15,15],
"datasources": [1,0,0,0,1],
"metadata": { "datasource_names": ["traffic","lua profile","lua profile","lua profile","traffic"] },
"nodes": [49772551,49772552,49786799,49786800,49786801,49786802],
"weight": [15,15,40,15,15]
}
A step consists of a maneuver such as a turn or merge, followed by a distance of travel along a single way to the subsequent step.
Properties
distance
: The distance of travel from the maneuver to the subsequent step, infloat
meters.duration
: The estimated travel time, infloat
number of seconds.geometry
: The unsimplified geometry of the route segment, depending on thegeometries
parameter.weight
: The calculated weight of the step.
geometry |
|
---|---|
polyline | polyline with precision 5 in [latitude,longitude] encoding |
polyline6 | polyline with precision 6 in [latitude,longitude] encoding |
geojson | GeoJSON LineString |
name
: The name of the way along which travel proceeds.ref
: A reference number or code for the way. Optionally included, if ref data is available for the given way.pronunciation
: A string containing an IPA phonetic transcription indicating how to pronounce the name in thename
property. This property is omitted if pronunciation data is unavailable for the step.destinations
: The destinations of the way. Will beundefined
if there are no destinations.exits
: The exit numbers or names of the way. Will beundefined
if there are no exit numbers or names.mode
: A string signifying the mode of transportation.maneuver
: AStepManeuver
object representing the maneuver.intersections
: A list ofIntersection
objects that are passed along the segment, the very first belonging to the StepManeuverrotary_name
: The name for the rotary. Optionally included, if the step is a rotary and a rotary name is available.rotary_pronunciation
: The pronunciation hint of the rotary name. Optionally included, if the step is a rotary and a rotary pronunciation is available.driving_side
: The legal driving side at the location for this step. Eitherleft
orright
.
{
"geometry" : "{lu_IypwpAVrAvAdI",
"mode" : "driving",
"duration" : 15.6,
"weight" : 15.6,
"intersections" : [
{ "bearings" : [ 10, 92, 184, 270 ],
"lanes" : [
{ "indications" : [ "left", "straight" ],
"valid" : "false" },
{ "valid" : "true",
"indications" : [ "right" ] }
],
"out" : 2,
"in" : 3,
"entry" : [ "true", "true", "true", "false" ],
"location" : [ 13.39677, 52.54366 ]
},
{ "out" : 1,
"lanes" : [
{ "indications" : [ "straight" ],
"valid" : "true" },
{ "indications" : [ "right" ],
"valid" : "false" }
],
"bearings" : [ 60, 240, 330 ],
"in" : 0,
"entry" : [ "false", "true", "true" ],
"location" : [ 13.394718, 52.543096 ]
}
],
"name" : "Lortzingstraße",
"distance" : 152.3,
"maneuver" : {
"modifier" : "right",
"type" : "turn"
}
}
Properties
location
: A[longitude, latitude]
pair describing the location of the turn.bearing_before
: The clockwise angle from true north to the direction of travel immediately before the maneuver. Range 0-359.bearing_after
: The clockwise angle from true north to the direction of travel immediately after the maneuver. Range 0-359.type
A string indicating the type of maneuver. new identifiers might be introduced without API change Types unknown to the client should be handled like theturn
type, the existence of correctmodifier
values is guranteed.
type |
Description |
---|---|
turn |
a basic turn into direction of the modifier |
new name |
no turn is taken/possible, but the road name changes. The road can take a turn itself, following modifier . |
depart |
indicates the departure of the leg |
arrive |
indicates the destination of the leg |
merge |
merge onto a street (e.g. getting on the highway from a ramp, the modifier specifies the direction of the merge ) |
ramp |
Deprecated. Replaced by on_ramp and off_ramp . |
on ramp |
take a ramp to enter a highway (direction given my modifier ) |
off ramp |
take a ramp to exit a highway (direction given my modifier ) |
fork |
take the left/right side at a fork depending on modifier |
end of road |
road ends in a T intersection turn in direction of modifier |
use lane |
Deprecated replaced by lanes on all intersection entries |
continue |
Turn in direction of modifier to stay on the same road |
roundabout |
traverse roundabout, if the route leaves the roundabout there will be an additional property exit for exit counting. The modifier specifies the direction of entering the roundabout. |
rotary |
a traffic circle. While very similar to a larger version of a roundabout, it does not necessarily follow roundabout rules for right of way. It can offer rotary_name and/or rotary_pronunciation parameters (located in the RouteStep object) in addition to the exit parameter (located on the StepManeuver object). |
roundabout turn |
Describes a turn at a small roundabout that should be treated as normal turn. The modifier indicates the turn direciton. Example instruction: At the roundabout turn left . |
notification |
not an actual turn but a change in the driving conditions. For example the travel mode or classes. If the road takes a turn itself, the modifier describes the direction |
exit roundabout |
Describes a maneuver exiting a roundabout (usually preceeded by a roundabout instruction) |
exit rotary |
Describes the maneuver exiting a rotary (large named roundabout) |
Please note that even though there are new name
and notification
instructions, the mode
and name
can change
between all instructions. They only offer a fallback in case nothing else is to report.
modifier
An optionalstring
indicating the direction change of the maneuver.
modifier |
Description |
---|---|
uturn |
indicates reversal of direction |
sharp right |
a sharp right turn |
right |
a normal turn to the right |
slight right |
a slight turn to the right |
straight |
no relevant change in direction |
slight left |
a slight turn to the left |
left |
a normal turn to the left |
sharp left |
a sharp turn to the left |
The list of turns without a modifier is limited to: depart/arrive
. If the source/target location is close enough to the depart/arrive
location, no modifier will be given.
The meaning depends on the type
property.
type |
Description |
---|---|
turn |
modifier indicates the change in direction accomplished through the turn |
depart /arrive |
modifier indicates the position of departure point and arrival point in relation to the current direction of travel |
exit
An optionalinteger
indicating number of the exit to take. The property exists for theroundabout
/rotary
property: Number of the roundabout exit to take. If exit isundefined
the destination is on the roundabout.
New properties (potentially depending on type
) may be introduced in the future without an API version change.
A Lane
represents a turn lane at the corresponding turn location.
Properties
indications
: a indication (e.g. marking on the road) specifying the turn lane. A road can have multiple indications (e.g. an arrow pointing straight and left). The indications are given in an array, each containing one of the following types. Further indications might be added on without an API version change.
value |
Description |
---|---|
none |
No dedicated indication is shown. |
uturn |
An indication signaling the possibility to reverse (i.e. fully bend arrow). |
sharp right |
An indication indicating a sharp right turn (i.e. strongly bend arrow). |
right |
An indication indicating a right turn (i.e. bend arrow). |
slight right |
An indication indicating a slight right turn (i.e. slightly bend arrow). |
straight |
No dedicated indication is shown (i.e. straight arrow). |
slight left |
An indication indicating a slight left turn (i.e. slightly bend arrow). |
left |
An indication indicating a left turn (i.e. bend arrow). |
sharp left |
An indication indicating a sharp left turn (i.e. strongly bend arrow). |
valid
: a boolean flag indicating whether the lane is a valid choice in the current maneuver
{
"indications": ["left", "straight"],
"valid": "false"
}
An intersection gives a full representation of any cross-way the path passes bay. For every step, the very first intersection (intersections[0]
) corresponds to the
location of the StepManeuver. Further intersections are listed for every cross-way until the next turn instruction.
Properties
location
: A[longitude, latitude]
pair describing the location of the turn.bearings
: A list of bearing values (e.g. [0,90,180,270]) that are available at the intersection. The bearings describe all available roads at the intersection. Values are between 0-359 (0=true north)classes
: An array of strings signifying the classes (as specified in the profile) of the road exiting the intersection.entry
: A list of entry flags, corresponding in a 1:1 relationship to the bearings. A value oftrue
indicates that the respective road could be entered on a valid route.false
indicates that the turn onto the respective road would violate a restriction.in
: index into bearings/entry array. Used to calculate the bearing just before the turn. Namely, the clockwise angle from true north to the direction of travel immediately before the maneuver/passing the intersection. Bearings are given relative to the intersection. To get the bearing in the direction of driving, the bearing has to be rotated by a value of 180. The value is not supplied fordepart
maneuvers.out
: index into the bearings/entry array. Used to extract the bearing just after the turn. Namely, The clockwise angle from true north to the direction of travel immediately after the maneuver/passing the intersection. The value is not supplied forarrive
maneuvers.lanes
: Array ofLane
objects that denote the available turn lanes at the intersection. If no lane information is available for an intersection, thelanes
property will not be present.
{
"location":[13.394718,52.543096],
"in":0,
"out":2,
"bearings":[60,150,240,330],
"entry":["false","true","true","true"],
"classes": ["toll", "restricted"],
"lanes":{
"indications": ["left", "straight"],
"valid": "false"
}
}
Object used to describe waypoint on a route.
Properties
name
Name of the street the coordinate snapped tolocation
Array that contains the[longitude, latitude]
pair of the snapped coordinatedistance
The distance, in metres, from the input coordinate to the snapped coordinatehint
Unique internal identifier of the segment (ephemeral, not constant over data updates) This can be used on subsequent request to significantly speed up the query and to connect multiple services. E.g. you can use thehint
value obtained by thenearest
query ashint
values forroute
inputs.
{
"hint" : "KSoKADRYroqUBAEAEAAAABkAAAAGAAAAAAAAABhnCQCLtwAA_0vMAKlYIQM8TMwArVghAwEAAQH1a66g",
"distance" : 4.152629,
"name" : "Friedrichstraße",
"location" : [
13.388799,
52.517033
]
}