AT-BRI-MIB

-- ============================================================================
-- AT-ETH.MIB, Allied Telesis enterprise MIB: BRI module
--
-- Extracted from ATROUTER.MIB of pre 2.9.1 release
--
-- June 2006, Stan Xiang
--
-- Copyright (c) 2006 by Allied Telesis, Inc.
-- All rights reserved.
-- 
-- ============================================================================

AT-BRI-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, 
    OBJECT-TYPE, 
    NOTIFICATION-TYPE
    	FROM SNMPv2-SMI

    DisplayString,
    TruthValue
        FROM SNMPv2-TC

	ifIndex
		FROM IF-MIB

	modules,
	DisplayStringUnsized
		FROM AT-SMI-MIB
;
                                 
bri MODULE-IDENTITY
    LAST-UPDATED "200606281222Z"
    ORGANIZATION "Allied Telesis, Inc"
	CONTACT-INFO
	    "http://www.alliedtelesis.com"
	DESCRIPTION
	    "This MIB file contains definitions of managed objects for the
	     BRI module. "

    REVISION "200606281222Z"
DESCRIPTION
	"Initial Revision"

::= { modules 41 }

-- This group consists of a table of BRI interfaces indexed
-- by ifIndex which provide MIB objects not given in a convenient form by
-- other standard MIBs. There is also a BRI channel MIB indexed by ifIndex
-- and channel index which gives information about the channels on the
-- interface.

-- The BRI interface table. Each entry is a BRI interface on the router.

briIntTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF BriIntEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "The table of BRI interfaces."
    ::= { bri 1 }

briIntEntry OBJECT-TYPE
    SYNTAX      BriIntEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A single entry in the BRI interfaces table."
    INDEX   { briIntIndex }
    ::= { briIntTable 1 }

BriIntEntry ::=
    SEQUENCE {
        briIntIndex
            INTEGER,
        briIntBoardIndex
            INTEGER,
        briIntBoardPosition
            INTEGER,
        briIntMode
            INTEGER,
        briIntTdmChannelMap
            INTEGER,
        briIntIsdnChannelMap
            INTEGER
    }

briIntIndex OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The ifIndex of the BRI interface."
    ::= { briIntEntry 1 }

briIntBoardIndex OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The index in the arBoardTable of the board on which this BRI
            interface resides."
    ::= { briIntEntry 2 }

briIntBoardPosition OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The position on this BRI interface's board of this BRI
            interface."
    ::= { briIntEntry 3 }

briIntMode OBJECT-TYPE
    SYNTAX      INTEGER {
                isdn (1),
                tdm (2),
                mixed (3)
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The mode of operation of this BRI interface. The value isdn
            means that the entire interface is operating as an ISDN
            interface, the value tdm means that the entire interface is
            operating as TDM groups and the value mixed means that some
            channels in the interface are dedicated to ISDN and some to TDM
            groups."
    ::= { briIntEntry 4 }

briIntTdmChannelMap OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "A bit map of the channels in the BRI interface which are
            dedicated to TDM. Channel B1 has channel map value of 1,
            channel B2 has a channel map value of 2."
    ::= { briIntEntry 5 }

briIntIsdnChannelMap OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "A bit map of the channels in the BRI interface which are
            dedicated to ISDN. Channel B1 has channel map value of 1,
            channel B2 has a channel map value of 2."
    ::= { briIntEntry 6 }

-- The BRI channel table. Each entry is a channel on a BRI interface.

briChanTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF BriChanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "The table of channels on BRI interfaces."
    ::= { bri 2 }

briChanEntry OBJECT-TYPE
    SYNTAX      BriChanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A single entry in the BRI channels table."
    INDEX   { briChanIntIndex, briChanChannelIndex }
    ::= { briChanTable 1 }

BriChanEntry ::=
    SEQUENCE {
        briChanIntIndex
            INTEGER,
        briChanChannelIndex
            INTEGER,
        briChanMode
            INTEGER,
        briChanState
            INTEGER
    }

briChanIntIndex OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The ifIndex of the BRI interface."
    ::= { briChanEntry 1 }

briChanChannelIndex OBJECT-TYPE
    SYNTAX      INTEGER (1..3)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The channel index of the BRI channel. Channel B1 has index 1,
            channel B2 has index 2 and the D channel has index 3."
    ::= { briChanEntry 2 }

briChanMode OBJECT-TYPE
    SYNTAX      INTEGER {
                isdn (1),
                tdm (2),
                none (3)
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The mode of this BRI channel. The value isdn means that the
            channel is reserved for use in ISDN calls. The value tdm
            means that the channel is reserved for use by TDM. For the D
            channel, this object will always have the value isdn."
    ::= { briChanEntry 3 }

briChanState OBJECT-TYPE
    SYNTAX      INTEGER {
                inactive (1),
                active (2)
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The state of this BRI channel. The value inactive means that
            the channel does not currently have an active user, either an
            ISDN call or an active TDM group. The value active means that
            the channel is in use, either by an ISDN call or an active TDM
            group. For the D channel, this object will have the value
            active if LAPD is using the D channel (either for call control
            or X.25), or the value inactive otherwise."
    ::= { briChanEntry 4 }

END