AT-PRI-MIB

-- ============================================================================
-- AT-ETH.MIB, Allied Telesis enterprise MIB: PRI module
--
-- Extracted from ATROUTER.MIB of pre 2.9.1 release
--
-- June 2006, Stan Xiang
--
-- Copyright (c) 2006 by Allied Telesis, Inc.
-- All rights reserved.
-- 
-- ============================================================================

AT-PRI-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, 
    OBJECT-TYPE, 
    NOTIFICATION-TYPE
    	FROM SNMPv2-SMI

    DisplayString,
    TruthValue
        FROM SNMPv2-TC

	ifIndex
		FROM IF-MIB

	modules,
	DisplayStringUnsized
		FROM AT-SMI-MIB
;
                                 
pri MODULE-IDENTITY
    LAST-UPDATED "200606281222Z"
    ORGANIZATION "Allied Telesis, Inc"
	CONTACT-INFO
	    "http://www.alliedtelesis.com"
	DESCRIPTION
	    "This MIB file contains definitions of managed objects for the
	    PRI module. "

    REVISION "200606281222Z"
DESCRIPTION
	"Initial Revision"

::= { modules 42 }

-- The PRI module. This group consists of a table of PRI interfaces indexed
-- by ifIndex which provide MIB objects not given in a convenient form by
-- other standard MIBs. There is also a PRI channel MIB indexed by ifIndex
-- and channel index which gives information about the channels on the
-- interface.

-- The PRI interface table. Each entry is a PRI interface on the router.

priIntTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PriIntEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "The table of PRI interfaces."
    ::= { pri 1 }

priIntEntry OBJECT-TYPE
    SYNTAX      PriIntEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A single entry in the PRI interfaces table."
    INDEX   { priIntIndex }
    ::= { priIntTable 1 }

PriIntEntry ::=
    SEQUENCE {
        priIntIndex
            INTEGER,
        priIntBoardIndex
            INTEGER,
        priIntBoardPosition
            INTEGER,
        priIntMode
            INTEGER,
        priIntTdmChannelMap
            INTEGER,
        priIntIsdnChannelMap
            INTEGER,
        priIntType
            INTEGER
    }

priIntIndex OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The ifIndex of the PRI interface."
    ::= { priIntEntry 1 }

priIntBoardIndex OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The index in the arBoardTable of the board on which this PRI
            interface resides."
    ::= { priIntEntry 2 }

priIntBoardPosition OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The position on this PRI interface's board of this PRI
            interface."
    ::= { priIntEntry 3 }

priIntMode OBJECT-TYPE
    SYNTAX      INTEGER {
                isdn (1),
                tdm (2),
                mixed (3)
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The mode of operation of this PRI interface. The value isdn
            means that the entire interface is operating as an ISDN
            interface, the value tdm means that the entire interface is
            operating as TDM groups and the value mixed means that some
            channels in the interface are dedicated to ISDN and some to TDM
            groups."
    ::= { priIntEntry 4 }

priIntTdmChannelMap OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "A bit map of the channels in the PRI interface which are
            dedicated to TDM. PRI channels are numbered from 0 to 31, 0 is
            unused, 16 (E1) or 24 (T1) is the D channel. The map values are
            2 to the power of the channel number."
    ::= { priIntEntry 5 }

priIntIsdnChannelMap OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "A bit map of the channels in the PRI interface which are
            dedicated to ISDN. PRI channels are numbered from 0 to 31, 0 is
            unused, 16 (E1) or 24 (T1) is the D channel. The map values are
            2 to the power of the channel number."
    ::= { priIntEntry 6 }

priIntType OBJECT-TYPE
    SYNTAX      INTEGER {
                e1 (1),
                t1 (2),
                unknown (3)
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The type of primary rate interface. E1 has 30 B + D channel,
            T1 has 23 B + D channel. If the value unknown is returned for
            this object, the exact PRI type has not yet been determined."
    ::= { priIntEntry 7 }

-- The PRI channel table. Each entry is a channel on a PRI interface.

priChanTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PriChanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "The table of channels on PRI interfaces."
    ::= { pri 2 }

priChanEntry OBJECT-TYPE
    SYNTAX      PriChanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A single entry in the PRI channels table."
    INDEX   { priChanIntIndex, priChanChannelIndex }
    ::= { priChanTable 1 }

PriChanEntry ::=
    SEQUENCE {
        priChanIntIndex
            INTEGER,
        priChanChannelIndex
            INTEGER,
        priChanMode
            INTEGER,
        priChanState
            INTEGER
    }

priChanIntIndex OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The ifIndex of the PRI interface."
    ::= { priChanEntry 1 }

priChanChannelIndex OBJECT-TYPE
    SYNTAX      INTEGER (1..31)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The channel index of the PRI channel. Valid channels have
            indices from 1 to 31. The D channel on an E1 interface has
            index 16, the D channel on a T1 interface has index 24."
    ::= { priChanEntry 2 }

priChanMode OBJECT-TYPE
    SYNTAX      INTEGER {
                isdn (1),
                tdm (2),
                neither (3)
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The mode of this PRI channel. The value isdn means that the
            channel is reserved for use in ISDN calls. The value tdm
            means that the channel is reserved for use by TDM. For the D
            channel, this object will usually have the value isdn. An
            exception is if the interface is running common D channel mode
            and the D channel is reserved for TDM."
    ::= { priChanEntry 3 }

priChanState OBJECT-TYPE
    SYNTAX      INTEGER {
                inactive (1),
                active (2)
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The state of this PRI channel. The value inactive means that
            the channel does not currently have an active user, either an
            ISDN call or an active TDM group. The value active means that
            the channel is in use, either by an ISDN call or an active TDM
            group."
    ::= { priChanEntry 4 }

END