Skip to content

Latest commit

 

History

History
41 lines (28 loc) · 1.23 KB

README.md

File metadata and controls

41 lines (28 loc) · 1.23 KB
Raw

DACERI

Env Setup

On Raspberry PI, after cloning this repo, setup a Python virtual environment at the root.

$ python3 -m venv --system-site-packages .venv # setup a Python virtual environment whose name is ".venv". Use `ls -a` to find the .venv repo
$ source .venv/bin/activate  # activate the virtual environment

## Virtual environment .venv
 (.venv)$ pip install pithermalcam  # install the package (optional)

## Clone the repository
  git clone --recurse-submodules https://github.com/cissieAB/CamStream.git

HD Camera Setup

$ sudo nano /boot/firmware/config.txt

## Find line with dtparam_arm = on and change to:
dtparam_arm = on, arm_baudrate = 400000

## Confirm the camera is connected with command
$ sudo i2cdetect -y 1

Notes

  • The trick to make PiThermalCam running if you want to use the pip module

    After pip install pithermacam, find the cmapy.py file and update it as following:

    1. Replace matplotlib.cm.get_cmap() with matplotlib.pyplot.get_cmap()
    2. At the top of the file, add import matplotlib.pyplot

    After that, run the camera test to check if there is any error.

    (.venv)$ python3 PiThermalCam/examples/cam_test.py