This is an unofficial fork of the awesome Home Assistant Operating System which adds support for the Rock Pi 4 board family.
This is build is developed and tested mainly on the Rock Pi 4B+. However, users have reported that it also works on other boards which use very similar hardware:
- Rock Pi 4SE
- OKdo Rock 4C+
It might also work on other boards of the Rock Pi 4 family. Please try flashing it first before opening an issue. If it works, let me know so that I can add the board to the list.
You have a different Rock Pi board and would like to run Home Assistant on it? Please open an issue to get in contact.
Download the latest version from the Releases page, extract the image and flash it to your SD card or eMMC.
No further configuration should be required.
The serial baud rate is set to 1500000 as it is the default for the Rock Pi. If your serial interface cannot handle that speed, you can modify the kernel commandline to change it. To do this, mount the first partition of the image (fat) and modify commandline.txt.
- Serial/UART
- HDMI
- Ethernet
- Wifi
- Bluetooth
- NVMe
- Analog Audio