factory.opt

# Scan runs a scan of a specified index of a table, possibly with an index
# constraint and/or a hard limit.
define Scan {
    Table cat.Table
    Index cat.Index
    Params exec.ScanParams
    ReqOrdering exec.OutputOrdering
}

define Values {
    Rows [][]tree.TypedExpr
    Columns colinfo.ResultColumns
}

# Filter applies a filter on the results of the given input node.
define Filter {
    Input exec.Node
    Filter tree.TypedExpr
    ReqOrdering exec.OutputOrdering
}

# InvertedFilter applies a span expression on the results of the given input
# node.
define InvertedFilter {
    Input exec.Node
    InvFilter *invertedexpr.SpanExpression
    PreFiltererExpr tree.TypedExpr
    PreFiltererType *types.T
    InvColumn exec.NodeColumnOrdinal
}

# SimpleProject applies a "simple" projection on the results of the given input
# node. A simple projection is one that does not involve new expressions; it's
# just a reshuffling of columns. This is a more efficient version of
# ConstructRender.  The colNames argument is optional; if it is nil, the names
# of the corresponding input columns are kept.
define SimpleProject {
    Input exec.Node
    Cols []exec.NodeColumnOrdinal
    ReqOrdering exec.OutputOrdering
}

# SerializingProject is similar to SimpleProject, but it allows renaming of
# columns and forces distributed execution to serialize (merge) any parallel
# result streams into a single stream before the projection. This allows any
# required output ordering of the input node to be "materialized", which is
# important for cases where the projection no longer contains the ordering
# columns (e.g. SELECT a FROM t ORDER BY b).
#
# Typically used as the "root" (top-level) operator to ensure the correct
# ordering and naming of columns.
define SerializingProject {
    Input exec.Node
    Cols []exec.NodeColumnOrdinal
    ColNames []string
}

# Render applies a projection on the results of the given input node. The
# projection can contain new expressions. The input expression slice will be
# modified.
define Render {
    Input exec.Node
    Columns colinfo.ResultColumns
    Exprs tree.TypedExprs
    ReqOrdering exec.OutputOrdering
}

# ApplyJoin runs an apply join between an input node (the left side of the join)
# and a RelExpr that has outer columns (the right side of the join) by replacing
# the outer columns of the right side RelExpr with data from each row of the
# left side of the join according to the data in leftBoundColMap. The apply join
# can be any kind of join except for right outer and full outer.
#
# To plan the right-hand side, planRightSideFn must be called for each left
# row. This function generates a plan (using the same factory) that produces
# the rightColumns (in order).
#
# onCond is the join condition.
define ApplyJoin {
    JoinType descpb.JoinType
    Left exec.Node
    RightColumns colinfo.ResultColumns
    OnCond tree.TypedExpr
    PlanRightSideFn exec.ApplyJoinPlanRightSideFn
}

# HashJoin runs a hash-join between the results of two input nodes.
#
# The leftEqColsAreKey/rightEqColsAreKey flags, if set, indicate that the
# equality columns form a key in the left/right input.
#
# The extraOnCond expression can refer to columns from both inputs using
# IndexedVars (first the left columns, then the right columns).
define HashJoin {
    JoinType descpb.JoinType
    Left exec.Node
    Right exec.Node
    LeftEqCols []exec.NodeColumnOrdinal
    RightEqCols []exec.NodeColumnOrdinal
    LeftEqColsAreKey bool
    RightEqColsAreKey bool
    ExtraOnCond tree.TypedExpr
}

# MergeJoin runs a merge join.

# The ON expression can refer to columns from both inputs using IndexedVars
# (first the left columns, then the right columns). In addition, the i-th
# column in leftOrdering is constrained to equal the i-th column in
# rightOrdering. The directions must match between the two orderings.
define MergeJoin {
    JoinType descpb.JoinType
    Left exec.Node
    Right exec.Node
    OnCond tree.TypedExpr
    LeftOrdering colinfo.ColumnOrdering
    RightOrdering colinfo.ColumnOrdering
    ReqOrdering exec.OutputOrdering
    LeftEqColsAreKey bool
    RightEqColsAreKey bool
}

# GroupBy runs an aggregation. A set of aggregations is performed for each group
# of values on the groupCols.
# A row is produced for each set of distinct values on the group columns. The
# row contains the values of the grouping columns, followed by one value for
# each aggregation.
define GroupBy {
    Input exec.Node
    GroupCols []exec.NodeColumnOrdinal

    # If set, the input is guaranteed to have this ordering and a "streaming"
    # aggregation is performed (i.e. aggregation happens separately for each
    # distinct set of values on the set of columns in the ordering).
    GroupColOrdering colinfo.ColumnOrdering
    Aggregations []exec.AggInfo
    ReqOrdering exec.OutputOrdering
}

# ScalarGroupBy runs a scalar aggregation, i.e.  one which performs a set of
# aggregations on all the input rows (as a single group) and has exactly one
# result row (even when there are no input rows). The output row has one value
# for each aggregation.
define ScalarGroupBy {
    Input exec.Node
    Aggregations []exec.AggInfo
}

# Distinct filters out rows such that only the first row is kept for each set of
# values along the distinct columns.  The orderedCols are a subset of
# distinctCols; the input is required to be ordered along these columns (i.e.
# all rows with the same values on these columns are a contiguous part of the
# input).
define Distinct {
    Input exec.Node
    DistinctCols exec.NodeColumnOrdinalSet
    OrderedCols exec.NodeColumnOrdinalSet
    ReqOrdering exec.OutputOrdering
    NullsAreDistinct bool
    ErrorOnDup string
}

# SetOp performs a UNION / INTERSECT / EXCEPT operation (either the ALL or the
# DISTINCT version). The left and right nodes must have the same number of
# columns.
define SetOp {
    Typ tree.UnionType
    All bool
    Left exec.Node
    Right exec.Node
}

# Sort performs a resorting of the rows produced by the input node.
#
# When the input is partially sorted we can execute a "segmented" sort. In
# this case alreadyOrderedPrefix is non-zero and the input is ordered by
# ordering[:alreadyOrderedPrefix].
define Sort {
    Input exec.Node
    Ordering exec.OutputOrdering
    AlreadyOrderedPrefix int
}

# Ordinality appends an ordinality column to each row in the input node.
define Ordinality {
    Input exec.Node
    ColName string
}

# IndexJoin performs an index join. The input contains the primary key (on the
# columns identified as keyCols).
#
# The index join produces the given table columns (in ordinal order).
define IndexJoin {
    Input exec.Node
    Table cat.Table
    KeyCols []exec.NodeColumnOrdinal
    TableCols exec.TableColumnOrdinalSet
    ReqOrdering exec.OutputOrdering
}

# LookupJoin performs a lookup join.
#
# The eqCols are columns from the input used
# as keys for the columns of the index (or a prefix of them); lookupCols are
# ordinals for the table columns we are retrieving.
#
# The node produces the columns in the input and (unless join type is
# LeftSemiJoin or LeftAntiJoin) the lookupCols, ordered by ordinal. The ON
# condition can refer to these using IndexedVars.
define LookupJoin {
    JoinType descpb.JoinType
    Input exec.Node
    Table cat.Table
    Index cat.Index
    EqCols []exec.NodeColumnOrdinal
    EqColsAreKey bool
    LookupCols exec.TableColumnOrdinalSet
    OnCond tree.TypedExpr
    SecondJoinInPairedJoiner bool
    ReqOrdering exec.OutputOrdering
    Locking *tree.LockingItem
}

# InvertedJoin performs a lookup join into an inverted index.
#
# invertedExpr is used to find the keys to look up in the index; lookupCols
# are ordinals for the table columns we are retrieving.
#
# The node produces the columns in the input and (unless join type is
# LeftSemiJoin or LeftAntiJoin) the lookupCols, ordered by ordinal. The ON
# condition can refer to these using IndexedVars. Note that lookupCols
# includes the inverted column.
define InvertedJoin {
    JoinType descpb.JoinType
    InvertedExpr tree.TypedExpr
    Input exec.Node
    Table cat.Table
    Index cat.Index
    LookupCols exec.TableColumnOrdinalSet
    OnCond tree.TypedExpr
    FirstJoinInPairedJoiner bool
    ReqOrdering exec.OutputOrdering
}

# ZigzagJoin performs a zigzag join.
#
# Each side of the join has two kinds of columns: fixed columns and equal
# columns. The fixed columns correspond 1-to-1 to a prefix of the index columns.
# The fixed columns and the equal columns together also form a prefix of the
# index columns.
define ZigzagJoin {
    # Left table and index.
    LeftTable cat.Table
    LeftIndex cat.Index

    # LeftCols are the columns that are scanned from the left index.
    LeftCols exec.TableColumnOrdinalSet

    # LeftFixedVals contains values for the fixed columns (a prefix of the
    # index columns).
    LeftFixedVals []tree.TypedExpr

    # LeftEqCols are the left table columns that have equality constraints,
    # corresponding 1-1 to RightEqCols.
    LeftEqCols []exec.TableColumnOrdinal

    # Right table and index.
    RightTable cat.Table
    RightIndex cat.Index

    # RightCols are the columns that are scanned from the right index.
    RightCols exec.TableColumnOrdinalSet

    # RightFixedVals contains values for the fixed columns (a prefix of the
    # index columns).
    RightFixedVals []tree.TypedExpr

    # RightEqCols are the right table columns that have equality constraints,
    # corresponding 1-1 to LeftEqCols.
    RightEqCols []exec.TableColumnOrdinal

    # OnCond is an extra filter that is evaluated on the results.
    # TODO(radu): remove this (it can be a separate Select).
    OnCond tree.TypedExpr
    ReqOrdering exec.OutputOrdering
}

# Limit implements LIMIT and/or OFFSET on the results of the given node. If one
# or the other is not needed, then it is set to nil.
define Limit {
    Input exec.Node
    Limit tree.TypedExpr
    Offset tree.TypedExpr
}

# Max1Row permits at most one row from the given input node, causing an error
# with the given text at runtime if the node tries to return more than one row.
define Max1Row {
    Input exec.Node
    ErrorText string
}

# ProjectSet performs a lateral cross join between the output of the given node
# and the functional zip of the given expressions.
define ProjectSet {
    Input exec.Node
    Exprs tree.TypedExprs
    ZipCols colinfo.ResultColumns
    NumColsPerGen []int
}

# Window executes a window function over the given node.
define Window {
    Input exec.Node
    Window exec.WindowInfo
}

# Explain implements EXPLAIN (OPT), showing information about the given plan.
define ExplainOpt {
    Plan string
    EnvOpts exec.ExplainEnvData
}

# Explain implements EXPLAIN, showing information about the given plan.
define Explain {
    Options *tree.ExplainOptions
    StmtType tree.StatementType
    Plan exec.Plan
}

# ExplainPlan implements EXPLAIN (PLAN).
#
# When the operator is created, it creates an ExplainFactory and calls BuildFn
# to construct the plan against that factory.
define ExplainPlan {
    Options *tree.ExplainOptions
    BuildFn exec.BuildPlanForExplainFn
}

# ShowTrace implements a SHOW TRACE FOR SESSION statement.
define ShowTrace {
    Typ tree.ShowTraceType
    Compact bool
}

# Insert implements an INSERT statement (including ON CONFLICT DO NOTHING, but
# not other ON CONFLICT clauses).
#
# The input columns are inserted into a subset of columns in the table, in the
# same order they're defined. The insertCols set contains the ordinal positions
# of columns in the table into which values are inserted. All columns are
# expected to be present except delete-only mutation columns, since those do not
# need to participate in an insert operation.
define Insert {
    Input exec.Node
    Table cat.Table
    Arbiters cat.IndexOrdinals
    InsertCols exec.TableColumnOrdinalSet
    ReturnCols exec.TableColumnOrdinalSet
    CheckCols exec.CheckOrdinalSet

    # If set, the operator will commit the transaction as part of its execution.
    # This is false when executing inside an explicit transaction, or there are
    # multiple mutations in a statement, or the output of the mutation is
    # processed through side-effecting expressions.
    AutoCommit bool
}

# InsertFastPath implements a special (but very common) case of insert,
# satisfying the following conditions:
#  - the input is Values with at most InsertFastPathMaxRows, and there are no
#    subqueries;
#  - there are no other mutations in the statement, and the output of the
#    insert is not processed through side-effecting expressions.
#  - there are no self-referencing foreign keys;
#  - all FK checks can be performed using direct lookups into unique indexes.
#
# In this case, the foreign-key checks can run before (or even concurrently
# with) the insert. If they are run before, the insert is allowed to
# auto-commit.
define InsertFastPath {
    Rows [][]tree.TypedExpr
    Table cat.Table
    InsertCols exec.TableColumnOrdinalSet
    ReturnCols exec.TableColumnOrdinalSet
    CheckCols exec.CheckOrdinalSet
    FkChecks []exec.InsertFastPathFKCheck

    # If set, the operator will commit the transaction as part of its execution.
    # This is false when executing inside an explicit transaction.
    AutoCommit bool
}

# Update implements an UPDATE statement. The input contains columns that were
# fetched from the target table, and that provide existing values that can be
# used to formulate the new encoded value that will be written back to the table
# (updating any column in a family requires having the values of all other
# columns). The input also contains computed columns that provide new values for
# any updated columns.
#
# The fetchCols and updateCols sets contain the ordinal positions of the
# fetch and update columns in the target table. The input must contain those
# columns in the same order as they appear in the table schema, with the
# fetch columns first and the update columns second.
#
# The passthrough parameter contains all the result columns that are part of
# the input node that the update node needs to return (passing through from
# the input). The pass through columns are used to return any column from the
# FROM tables that are referenced in the RETURNING clause.
#
# If allowAutoCommit is set, the operator is allowed to commit the
# transaction (if appropriate, i.e. if it is in an implicit transaction).
# This is false if there are multiple mutations in a statement, or the output
# of the mutation is processed through side-effecting expressions.
define Update {
    Input exec.Node
    Table cat.Table
    FetchCols exec.TableColumnOrdinalSet
    UpdateCols exec.TableColumnOrdinalSet
    ReturnCols exec.TableColumnOrdinalSet
    Checks exec.CheckOrdinalSet
    Passthrough colinfo.ResultColumns

    # If set, the operator will commit the transaction as part of its execution.
    AutoCommit bool
}

# Upsert implements an INSERT..ON CONFLICT DO UPDATE or UPSERT statement.
#
# For each input row, Upsert will test the canaryCol. If it is null, then it
# will insert a new row. If not-null, then Upsert will update an existing row.
# The input is expected to contain the columns to be inserted, followed by the
# columns containing existing values, and finally the columns containing new
# values.
#
# The length of each group of input columns can be up to the number of
# columns in the given table. The insertCols, fetchCols, and updateCols sets
# contain the ordinal positions of the table columns that are involved in
# the Upsert. For example:
#
#   CREATE TABLE abc (a INT PRIMARY KEY, b INT, c INT)
#   INSERT INTO abc VALUES (10, 20, 30) ON CONFLICT (a) DO UPDATE SET b=25
#
#   insertCols = {0, 1, 2}
#   fetchCols  = {0, 1, 2}
#   updateCols = {1}
#
# The input is expected to first have 3 columns that will be inserted into
# columns {0, 1, 2} of the table. The next 3 columns contain the existing
# values of columns {0, 1, 2} of the table. The last column contains the
# new value for column {1} of the table.
define Upsert {
    Input exec.Node
    Table cat.Table
    Arbiters cat.IndexOrdinals
    CanaryCol exec.NodeColumnOrdinal
    InsertCols exec.TableColumnOrdinalSet
    FetchCols exec.TableColumnOrdinalSet
    UpdateCols exec.TableColumnOrdinalSet
    ReturnCols exec.TableColumnOrdinalSet
    Checks exec.CheckOrdinalSet

    # If set, the operator will commit the transaction as part of its execution.
    # This is false when executing inside an explicit transaction, or there are
    # multiple mutations in a statement, or the output of the mutation is
    # processed through side-effecting expressions.
    AutoCommit bool
}

# Delete implements a DELETE statement. The input contains columns that were
# fetched from the target table, and that will be deleted.
#
# The fetchCols set contains the ordinal positions of the fetch columns in
# the target table. The input must contain those columns in the same order
# as they appear in the table schema.
define Delete {
    Input exec.Node
    Table cat.Table
    FetchCols exec.TableColumnOrdinalSet
    ReturnCols exec.TableColumnOrdinalSet

    # If set, the operator will commit the transaction as part of its execution.
    # This is false when executing inside an explicit transaction, or there are
    # multiple mutations in a statement, or the output of the mutation is
    # processed through side-effecting expressions.
    AutoCommit bool
}

# DeleteRange efficiently deletes contiguous rows stored in the given table's
# primary index. This fast path is only possible when certain conditions hold
# true:
#  - there are no secondary indexes;
#  - the input to the delete is a scan (without limits);
#  - the table is not involved in interleaving, or it is at the root of an
#    interleaving hierarchy with cascading FKs such that a delete of a row
#    cascades and deletes all interleaved rows corresponding to that row;
#  - there are no inbound FKs to the table (other than within the
#    interleaving as described above).
#
# See the comment for ConstructScan for descriptions of the needed and
# indexConstraint parameters, since DeleteRange combines Delete + Scan into a
# single operator.
#
# If any interleavedTables are passed, they are all the descendant tables in
# an interleaving hierarchy we are deleting from.
define DeleteRange {
    Table cat.Table
    Needed exec.TableColumnOrdinalSet
    IndexConstraint *constraint.Constraint
    InterleavedTables []cat.Table

    # If set, the operator will commit the transaction as part of its execution.
    # This is false when executing inside an explicit transaction, or there are
    # multiple mutations in a statement, or the output of the mutation is
    # processed through side-effecting expressions, or the operation might
    # process too many rows.
    AutoCommit bool
}

# CreateTable implements a CREATE TABLE statement.
define CreateTable {
    Schema cat.Schema
    Ct *tree.CreateTable
}

# CreateTableAs implements a CREATE TABLE AS statement.
define CreateTableAs {
    Input exec.Node
    Schema cat.Schema
    Ct *tree.CreateTable
}

# CreateView implements a CREATE VIEW statement.
define CreateView {
    Schema cat.Schema
    ViewName *cat.DataSourceName
    IfNotExists bool
    Replace bool
    Persistence tree.Persistence
    Materialized bool
    ViewQuery string
    Columns colinfo.ResultColumns
    deps opt.ViewDeps
}

# SequenceSelect implements a scan of a sequence as a data source.
define SequenceSelect {
    Sequence cat.Sequence
}

# SaveTable passes through all the input rows unchanged, but also creates a
# table and inserts all the rows into it.
define SaveTable {
    Input exec.Node
    Table *cat.DataSourceName
    ColNames []string
}

# ErrorIfRows returns no results, but causes an execution error if the input
# returns any rows.
define ErrorIfRows {
    Input exec.Node

    # MkErr is used to create the error; it is passed an input row.
    MkErr exec.MkErrFn
}

# Opaque implements operators that have no relational inputs and which require
# no specific treatment by the optimizer.
define Opaque {
    Metadata opt.OpaqueMetadata
}

# AlterTableSplit implements ALTER TABLE/INDEX SPLIT AT.
define AlterTableSplit {
    Index cat.Index
    Input exec.Node
    Expiration tree.TypedExpr
}

# AlterTableUnsplit implements ALTER TABLE/INDEX UNSPLIT AT.
define AlterTableUnsplit {
    Index cat.Index
    Input exec.Node
}

# AlterTableUnsplitAll implements ALTER TABLE/INDEX UNSPLIT ALL.
define AlterTableUnsplitAll {
    Index cat.Index
}

# AlterTableRelocate implements ALTER TABLE/INDEX UNSPLIT AT.
define AlterTableRelocate {
    Index cat.Index
    input exec.Node
    relocateLease bool
}

# Buffer passes through the input rows but also saves them in a buffer, which
# can be referenced from elsewhere in the query (using ScanBuffer).
define Buffer {
    Input exec.Node
    Label string
}

# ScanBuffer refers to a node constructed by Buffer or passed to
# RecursiveCTEIterationFn.
define ScanBuffer {
    Ref exec.Node
    Label string
}

# RecursiveCTE executes a recursive CTE:
#   * the initial plan is run first; the results are emitted and also saved
#     in a buffer.
#   * so long as the last buffer is not empty:
#     - the RecursiveCTEIterationFn is used to create a plan for the
#       recursive side; a reference to the last buffer is passed to this
#       function. The returned plan uses this reference with a
#       ConstructScanBuffer call.
#     - the plan is executed; the results are emitted and also saved in a new
#       buffer for the next iteration.
define RecursiveCTE {
    Initial exec.Node
    Fn exec.RecursiveCTEIterationFn
    Label string
}

# ControlJobs implements PAUSE/CANCEL/RESUME JOBS.
define ControlJobs {
    Command tree.JobCommand
    input exec.Node
}

# ControlSchedules implements PAUSE/CANCEL/DROP SCHEDULES.
define ControlSchedules {
    Command tree.ScheduleCommand
    input exec.Node
}

# CancelQueries implements CANCEL QUERIES.
define CancelQueries {
    Input exec.Node
    IfExists bool
}

# CancelSessions implements CANCEL SESSIONS.
define CancelSessions {
    Input exec.Node
    IfExists bool
}

# Export implements EXPORT.
define Export {
    Input exec.Node
    FileName tree.TypedExpr
    FileFormat string
    Options []exec.KVOption
}