Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

请求修复RA5JDC设备 #12179

Closed
1 task done
f1owkang opened this issue May 23, 2024 · 7 comments
Closed
1 task done

请求修复RA5JDC设备 #12179

f1owkang opened this issue May 23, 2024 · 7 comments

Comments

@f1owkang
Copy link

f1owkang commented May 23, 2024 •
edited
Loading

详细叙述

听您说是uboot 参数问题，我尝试自己修复了RA5的设备树。但是无法编译通过，又尝试移植了https://github.com/JiaY-shi/openwrt 的仓库，也是出现很多问题例如
CC drivers/thermal/thermal_trip.o drivers/thermal/thermal_trip.c: In function '__thermal_zone_get_trip': drivers/thermal/thermal_trip.c:118:9: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 118 | if (!tz || trip_id < 0 || trip_id >= tz->num_trips || !trip) | ^~ drivers/thermal/thermal_trip.c:121:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 121 | if (tz->trips) { | ^~
种种无奈请求大佬修复或者指点一下，感激不尽

重复 issue

  • 没有类似的 issue

具体型号

RA50

详细日志

lede正常编译，编译固件无法启动
@f1owkang
Copy link
Author

这里是LEDE编译固件刷入之后产生的日志，刚启动之后一会儿死机
[ 13.747209] EXT4-fs (loop0): mounted filesystem with ordered data mode. Quota mode: disabled.
[ 13.747397] block: attempting to load /tmp/ext4_cfg/upper/etc/config/fstab
[ 13.754892] block: unable to load configuration (fstab: Entry not found)
[ 13.761536] block: attempting to load /tmp/ext4_cfg/etc/config/fstab
[ 13.768399] block: unable to load configuration (fstab: Entry not found)
[ 13.774797] block: attempting to load /etc/config/fstab
[ 13.783414] block: unable to load configuration (fstab: Entry not found)
[ 13.786336] block: no usable configuration
[ 13.793605] EXT4-fs (loop0): unmounting filesystem.
[ 13.798546] loop0: detected capacity change from 0 to 231464
[ 13.851367] loop0: detected capacity change from 231464 to 102568
[ 13.855040] EXT4-fs (loop0): mounted filesystem with ordered data mode. Quota mode: disabled.
[ 13.979154] block: attempting to load /tmp/ext4_cfg/upper/etc/config/fstab
[ 13.979248] block: unable to load configuration (fstab: Entry not found)
[ 13.985015] block: attempting to load /tmp/ext4_cfg/etc/config/fstab
[ 13.991930] block: unable to load configuration (fstab: Entry not found)
[ 13.998150] block: attempting to load /etc/config/fstab
[ 14.004854] block: unable to load configuration (fstab: Entry not found)
[ 14.009778] block: no usable configuration
[ 14.017653] mount_root: overlay filesystem has not been fully initialized yet
[ 14.021417] mount_root: switching to ext4 overlay
[ 14.030894] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 14.037720] urandom-seed: Seed file not found (/etc/urandom.seed)
Scanning for Btrfs filesystems
[ 14.459796] procd: - early -
[ 14.459899] procd: - watchdog -
[ 15.080391] procd: - watchdog -
[ 15.132556] procd: - ubus -
[ 15.322555] procd: - init -
Please press Enter to activate this console.
[ 15.833179] urngd: v1.0.2 started.
[ 16.466189] kmodloader: loading kernel modules from /etc/modules.d/*
[ 16.557935] NET: Registered PF_ALG protocol family
[ 16.568800] FS-Cache: Loaded
[ 16.570006] CacheFiles: Loaded
[ 16.572523] Key type dns_resolver registered
[ 16.605932] NET: Registered PF_RXRPC protocol family
[ 16.605970] Key type rxrpc registered
[ 16.609961] Key type rxrpc_s registered
[ 16.616170] kAFS: Red Hat AFS client v0.1 registering.
[ 16.751369] kAFS: failed to register: -97
[ 16.857637] tun: Universal TUN/TAP device driver, 1.6
[ 16.868229] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 16.961197] cryptodev: driver 1.13 loaded.
[ 16.964768] ntfs3: Max link count 4000
[ 16.964805] ntfs3: Enabled Linux POSIX ACLs support
[ 17.001160] Bridge firewalling registered
[ 17.001820] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
[ 17.004157] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
[ 17.059383] NET: Registered PF_QIPCRTR protocol family
[ 17.065238] usbcore: registered new interface driver ums-alauda
[ 17.066312] usbcore: registered new interface driver ums-cypress
[ 17.071008] usbcore: registered new interface driver ums-datafab
[ 17.077195] usbcore: registered new interface driver ums-freecom
[ 17.083212] usbcore: registered new interface driver ums-isd200
[ 17.089119] usbcore: registered new interface driver ums-jumpshot
[ 17.094726] usbcore: registered new interface driver ums-karma
[ 17.101121] usbcore: registered new interface driver ums-sddr09
[ 17.106786] usbcore: registered new interface driver ums-sddr55
[ 17.112674] usbcore: registered new interface driver ums-usbat
[ 17.130302] xt_time: kernel timezone is -0000
[ 17.150693] PPP generic driver version 2.4.2
[ 17.151764] PPP MPPE Compression module registered
[ 17.154976] NET: Registered PF_PPPOX protocol family
[ 17.166919] ath11k c000000.wifi: ipq6018 hw1.0
[ 17.166954] ath11k c000000.wifi: FW memory mode: 1
[ 17.170581] remoteproc remoteproc0: powering up cd00000.remoteproc
[ 17.175964] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340
[ 17.857692] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up
[ 17.858944] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[ 17.864794] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff
[ 17.870253] ath11k c000000.wifi: fw_version 0x250a04b8 fw_build_timestamp 2021-12-20 07:20 fw_build_id WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
[ 17.879404] kAFS: Red Hat AFS client v0.1 registering.
[ 18.071383] kAFS: failed to register: -97
[ 18.241740] kmodloader: 1 module could not be probed
[ 18.241859] kmodloader: - kafs - 0
[ 37.794262] EXT4-fs (mmcblk0p22): recovery complete
[ 37.794305] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Quota mode: disabled.
[ 37.797972] ext4 filesystem being mounted at /mnt/mmcblk0p22 supports timestamps until 2038 (0x7fffffff)
[ 37.810312] EXT4-fs (mmcblk0p24): recovery complete
[ 37.816633] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Quota mode: disabled.
[ 37.829309] EXT4-fs (mmcblk0p25): recovery complete
[ 37.830249] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Quota mode: disabled.
[ 41.626789] nss-dp 3a001200.dp2 lan1: PHY Link up speed: 1000
[ 41.627480] br-lan: port 1(lan1) entered blocking state
[ 41.631585] br-lan: port 1(lan1) entered disabled state
[ 41.636790] device lan1 entered promiscuous mode
[ 41.650593] br-lan: port 2(lan2) entered blocking state
[ 41.650642] br-lan: port 2(lan2) entered disabled state
[ 41.654981] device lan2 entered promiscuous mode
[ 41.664561] br-lan: port 3(lan3) entered blocking state
[ 41.664711] br-lan: port 3(lan3) entered disabled state
[ 41.669908] device lan3 entered promiscuous mode
[ 42.495757] br-lan: port 4(wlan0) entered blocking state
[ 42.495801] br-lan: port 4(wlan0) entered disabled state
[ 42.500428] device wlan0 entered promiscuous mode
[ 42.505657] br-lan: port 4(wlan0) entered blocking state
[ 42.510044] br-lan: port 4(wlan0) entered forwarding state
[ 42.515679] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 42.623170] br-lan: port 5(wlan1) entered blocking state
[ 42.623214] br-lan: port 5(wlan1) entered disabled state
[ 42.627771] device wlan1 entered promiscuous mode
[ 42.632999] br-lan: port 5(wlan1) entered blocking state
[ 42.637453] br-lan: port 5(wlan1) entered forwarding state
[ 42.642989] br-lan: port 1(lan1) entered blocking state
[ 42.648140] br-lan: port 1(lan1) entered forwarding state
[ 42.654162] br-lan: port 4(wlan0) entered disabled state
[ 42.664157] br-lan: port 5(wlan1) entered disabled state
[ 42.726623] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 42.726813] br-lan: port 5(wlan1) entered blocking state
[ 42.732080] br-lan: port 5(wlan1) entered forwarding state
[ 43.030759] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 43.030984] br-lan: port 4(wlan0) entered blocking state
[ 43.036290] br-lan: port 4(wlan0) entered forwarding state
[ 51.610773] qcom-q6v5-wcss-pil cd00000.remoteproc: fatal error received:
[ 51.610773] QC Image Version: QC_IMAGE_VERSION_STRING=WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
[ 51.610773] Image Variant : IMAGE_VARIANT_STRING=6018.wlanfw.evalQ
[ 51.610773]
[ 51.610773] NOC_error.c:474 NOCError: FATAL ERRORparam0 :zero, param1 :zero, param2 :zero.
[ 51.610773] Thread ID : 0x0000006f Thread name : ABTIST182 Process ID : 0
[ 51.610773] Register:
[ 51.610773] SP : 0x4af81ef8
[ 51.610773] FP : 0x4af81f00
[ 51.610773] PC : 0x4ac8d548
[ 51.610773] SSR : 0x00000008
[ 51.610773] BADVA : 0x00020000
[ 51.610773] LR : 0x4ac8cce4
[ 51.610773]
[ 51.610773] Stack Dump
[ 51.610773] from : 0x4af81ef8
[ 51.610773] to : 0x4af81fd0
[ 51.610773]
[ 51.657671] remoteproc remoteproc0: crash detected in cd00000.remoteproc: type fatal error
[ 51.679940] remoteproc remoteproc0: handling crash #1 in cd00000.remoteproc
[ 51.687965] remoteproc remoteproc0: recovering cd00000.remoteproc

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00077-IPQ60xxLZB-2
S - IMAGE_VARIANT_STRING=IPQ6018LA
S - OEM_IMAGE_VERSION_STRING=crm-ubuntu64
S - Boot Interface: eMMC
S - Secure Boot: Off
S - Boot Config @ 0x000a602c = 0x000002e3
S - JTAG ID @ 0x000a607c = 0x001390e1
S - OEM ID @ 0x000a6080 = 0x00000000
S - Serial Number @ 0x000a4128 = 0x3f7c9a2a
S - OEM Config Row 0 @ 0x000a4188 = 0x0000000000000000
S - OEM Config Row 1 @ 0x000a4190 = 0x0000000000000000
S - Feature Config Row 0 @ 0x000a4130 = 0x0000800018200021
S - Feature Config Row 1 @ 0x000a4138 = 0x02c3e83783000009
S - PBL Patch Ver: 1
S - I-cache: On
S - D-cache: On
B - 3413 - PBL, Start
B - 592 - bootable_media_detect_entry, Start
B - 4339 - bootable_media_detect_success, Start
B - 32254 - elf_loader_entry, Start
B - 32425 - auth_hash_seg_entry, Start
B - 33407 - auth_hash_seg_exit, Start
B - 33904 - elf_segs_hash_verify_entry, Start
B - 61721 - elf_segs_hash_verify_exit, Start
B - 66147 - auth_xbl_sec_hash_seg_entry, Start
B - 66289 - auth_xbl_sec_hash_seg_exit, Start
B - 72834 - xbl_sec_segs_hash_verify_entry, Start
B - 72835 - xbl_sec_segs_hash_verify_exit, Start
B - 73764 - PBL, End
B - 65239 - SBL1, Start
B - 205295 - GCC [RstStat:0x2, RstDbg:0x420100] WDog Stat : 0x4
B - 207735 - clock_init, Start
D - 2897 - clock_init, Delta
B - 216367 - boot_flash_init, Start
D - 55022 - boot_flash_init, Delta
B - 274683 - sbl1_ddr_set_default_params, Start
D - 244 - sbl1_ddr_set_default_params, Delta
B - 281118 - boot_config_data_table_init, Start
D - 2165 - boot_config_data_table_init, Delta - (575 Bytes)
B - 290268 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:2,Subtype:0
B - 295819 - Image Load, Start
D - 6588 - OEM_MISC Image Loaded, Delta - (0 Bytes)
B - 305152 - Image Load, Start
D - 5063 - PMIC Image Loaded, Delta - (0 Bytes)
B - 313021 - sbl1_ddr_set_params, Start
B - 317993 - CPR configuration: 0x366
B - 321195 - Pre_DDR_clock_init, Start
D - 213 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta

@f1owkang
Copy link
Author

最近找到内核6.6的可用

@FreshKai
Copy link

您好，有RA50 JDC修复后的固件吗？
我看您主页仓库中的OpenWrt中的描述支持JDC-AX5，是这个吗？
@f1owkang

@f1owkang
Copy link
Author

您好，有RA50 JDC修复后的固件吗？ 我看您主页仓库中的OpenWrt中的描述支持JDC-AX5，是这个吗？ @f1owkang

是的，但是需要自己稍加修改

@FreshKai
Copy link

您好，有RA50 JDC修复后的固件吗？ 我看您主页仓库中的OpenWrt中的描述支持JDC-AX5，是这个吗？ @f1owkang

是的，但是需要自己稍加修改

指的是配置文件吗？还是需要在代码层面改动呢？

@f1owkang
Copy link
Author

您好，有RA50 JDC修复后的固件吗？ 我看您主页仓库中的OpenWrt中的描述支持JDC-AX5，是这个吗？ @f1owkang

是的，但是需要自己稍加修改

指的是配置文件吗？还是需要在代码层面改动呢？

配置文件

@FreshKai
Copy link

您好，有RA50 JDC修复后的固件吗？ 我看您主页仓库中的OpenWrt中的描述支持JDC-AX5，是这个吗？ @f1owkang

是的，但是需要自己稍加修改

指的是配置文件吗？还是需要在代码层面改动呢？

配置文件

好的，感谢您的工作

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@f1owkang @FreshKai