Skip to content

Latest commit

 

History

History
40 lines (34 loc) · 1.48 KB

README.md

File metadata and controls

40 lines (34 loc) · 1.48 KB
Raw

ESP32 Bluetooth Bridge

This is a Bluetooth Bridge for Xiaomi Bluetooth Devices.
If you use a this, your Nas no needs a bluetooth dongle.
You can use a multiple ESP32 boards.
It extends a bluetooth range.


Supported Device

a. Temperature-Humidity
b. Flora
c. E-ink

Prerequisites

a. ESP32
b. esphome-flasher (https://github.com/esphome/esphome-flasher/releases)
c. ESP32 Firmware file

Installation

Run a esphome-flasher & Select a firmware file then press a Flash ESP Button





If flashing is completed, it comes out as Run AP Mode, as in the log below:
IP is 192.168.4.1.



Access Wi-Fi starting with MI-AP-XXXX; (Password 12341234)



Open a browser & Go to 192.168.4.1 & Press a Load Button



Select an your Wi-Fi



Fill out the Wi-Fi password & Press a Save Button



Then the ESP32 is rebooted, and the broadcast data is received and sent.



This is mi connector dashboard page.



If you use a ESP32 board, you must disable a bluetooth enable as below