Peanut-GB is a single file header Game Boy emulator library based off of this gameboy emulator. The aim is to make a high speed and portable Game Boy (DMG) emulator library that may be used for any platform that has a C99 compiler.
This emulator is very fast. So much so that it can run at full speed on the Raspberry Pi Pico! Check out BENCHMARK.md for benchmarks of Peanut-GB.
Only the original Game Boy (DMG) is supported at this time, but preliminary work has been completed to support Game Boy Color (see #50).
This emulator is a work in progress and can be inaccurate (although it does pass Blargg's CPU instructions and instruction timing tests). As such, some games may run incorrectly or not run at all. Please seek an alternative emulator if accuracy is important.
- Game Boy (DMG) Support
- Very fast; fast enough to run on a RP2040 ARM Cortex M0+ microcontroller at full speed.
- MBC1, MBC2, MBC3, and MBC5 support
- Real Time Clock (RTC) support
- Serial connection support
- Can be used with or without a bootrom
- Allows different palettes on background and sprites
- Frame skip and interlacing modes (useful for slow LCDs)
- Simple to use and comes with examples
- LCD and sound can be disabled at compile time.
- If sound is enabled, an external audio processing unit (APU) library is required. A fast audio processing unit (APU) library is included in this repository at https://github.com/deltabeard/Peanut-GB/tree/master/examples/sdl2/minigb_apu .
- The LCD rendering is performed line by line, so certain animations will not render properly (such as in Prehistorik Man).
- Some games may not be playable due to emulation inaccuracy (see #31).
- MiniGB APU runs in a separate thread, and so the timing is not accurate. If accurate APU timing and emulation is required, then Blargg's Gb_Snd_Emu library (or an alternative) can be used instead.
The flagship example implementation is given in peanut_sdl.c, which uses SDL2 to
draw the screen and take input. Run cmake or make in the ./examples/sdl2/
folder to compile it.
Run peanut-sdl, which creates a drop-zone window that you can drag and drop
a ROM file into. Alternatively, run in a terminal using peanut-sdl game.gb,
which will automatically create the save file game.sav for the game if one
isn't found. Or, run with peanut-sdl game.gb save.sav to specify a save file.
Note: Animated GIFs shown here are limited to 50fps, whilst the emulation was running at the native ~60fps. This is because popular GIF decoders limit the maximum FPS to 50.
| Action | Keyboard | Joypad |
|---|---|---|
| A | z | A |
| B | x | B |
| Start | Return | START |
| Select | Backspace | BACK |
| D-Pad | Arrow Keys | DPAD |
| Repeat A | a | |
| Repeat B | s | |
| Normal Speed | 1 | |
| Turbo x2 (Hold) | Space | |
| Turbo X2 (Toggle) | 2 | |
| Turbo X3 (Toggle) | 3 | |
| Turbo X4 (Toggle) | 4 | |
| Reset | r | |
| Change Palette | p | |
| Reset Palette | Shift + p | |
| Fullscreen | F11 / f | |
| Frameskip (Toggle) | o | |
| Interlace (Toggle) | i | |
| Dump BMP (Toggle) | b |
Frameskip and Interlaced modes are both off by default. The Frameskip toggles between 60 FPS and 30 FPS.
Pressing 'b' will dump each frame as a 24-bit bitmap file in the current folder. See /screencaps/README.md for more information.
In no particular order, and a non-exaustive list, the following projects use Peanut-GB.
- Pico-GB - Game Boy emulation on the Raspberry Pi RP2040 microcontroller.
- Peanut_gb-RGFW - A Gameboy emulator example for RGFW.
- CPBoy - A Game Boy (DMG) emulator for the Classpad II (fx-CP400).
- PlayGB - A Game Boy emulator for Playdate, based on Peanut-GB.
Documentation of function prototypes can be found at the bottom of peanut_gb.h.
The front-end implementation must provide a number of functions to the library. These functions are set when calling gb_init.
- gb_rom_read
- gb_cart_ram_read
- gb_cart_ram_write
- gb_error
The following optional functions may be defined for further functionality.
This function is required for LCD drawing. Set this function using gb_init_lcd and enable LCD functionality within Peanut-GB by defining ENABLE_LCD to 1 before including peanut_gb.h. ENABLE_LCD is set to 1 by default if it was not previously defined. If gb_init_lcd is not called or lcd_draw_line is set to NULL, then LCD drawing is disabled.
The pixel data sent to lcd_draw_line comes with both shade and layer data. The first two least significant bits are the shade data (black, dark, light, white). Bits 4 and 5 are layer data (OBJ0, OBJ1, BG), which can be used to add more colours to the game in the same way that the Game Boy Color does to older Game Boy games.
These functions are required for audio emulation and output. Peanut-GB does not include audio emulation, so an external library must be used. These functions must be defined and audio output must be enabled by defining ENABLE_SOUND to 1 before including peanut_gb.h.
These functions are required for serial communication. Set these functions using gb_init_serial. If these functions are not set, then the emulation will act as though no link cable is connected.
These functions are provided by Peanut-GB.
This function resets the game being played, as though the console had been powered off and on. gb_reset is called by gb_init to initialise the CPU registers.
This function returns the save size of the game being played. This function returns 0 if the game does not use any save data.
This function runs the CPU until a full frame is rendered to the LCD.
This function calculates a hash of the game title. This hash is calculated in the same way as the Game Boy Color to add colour to Game Boy games.
This function returns the name of the game.
Set the time of the real time clock (RTC). Some games use this RTC data.
Deprecated: do not use. The RTC is ticked internally.
Execute a bootrom image on reset. A reset must be performed after calling gb_set_bootrom for these changes to take effect. This is because gb_init calls gb_reset, but gb_set_bootrom must be called after gb_init. The bootrom must be either a DMG or a MGB bootrom.
This project is licensed under the MIT License.