ElastiFlow™ Installation

ElastiFlow™ is built using the Elastic Stack, including Elasticsearch, Logstash and Kibana. To install and configure ElastiFlow™, you must first have a working Elastic Stack environment.

Elastic Stack 7.x requires ElastiFlow™ 3.5.x. To deploy on Elastic Stack 6.x you must use ElastiFlow™ 3.4.2 or earlier. The 3.4 branch will be maintained independently of the master branch for a while, as most users are still using a pre-7 release of the Elastic Stack.

Refer to the following compatibility chart to choose a release of ElastiFlow™ that is compatible with the version of the Elastic Stack you are using.

Elastic Stack	ElastiFlow™ 1.x	ElastiFlow™ 2.x	ElastiFlow™ 3.x
7.0			✓ v3.5.0
6.7			✓ v3.4.2
6.6			✓ v3.4.1
6.5			✓
6.4			✓
6.3			✓
6.2	✓	✓	✓
6.1	✓	✓
6.0	✓	✓
5.6	✓	✓
5.5	✓
5.4	✓

NOTE: The instructions that follow are for ElastiFlow™ 3.5.0 and above on Elastic Stack 7.x.

Requirements

Please be aware that in production environments the volume of data generated by many network flow sources can be considerable. It is not uncommon for a core router or firewall to produce 1000s of flow records per second. For this reason it is recommended that ElastiFlow™ be given its own dedicated Logstash instance. Multiple instances may be necessary as the volume of flow data increases.

Due to the way NIC receive queues and the Linux kernel interact, raw UDP packet reception will be bound to a single CPU core and kernel receive buffer. While additional UDP input workers allow Logstash to share the load of processing packets from the receive buffer, it does not scale linearly. As worker threads are increased, so is contention for buffer access. The sweetspot seems to be to use 4-core Logstash instances, adding additional instances as needed for high-volume environments.

It is my experience that most people underestimate the volume of flow data their network will produce. Save yourself the headache and don't start too small. Use the following table as a guide:

flows/sec	(v)CPUs	Memory	Disk (30-days)	ES JVM Heap	LS JVM Heap
250	4	24 GB	305 GB	8 GB	4 GB
1000	8	32 GB	1.22 TB	12 GB	4 GB
2500	12	64 GB	3.05 TB	24 GB	6 GB

For anything beyond 2500 flows/sec a multi-node cluster should be considered, and that Logstash be run on its own instance/server.

The above recommendations are a starting point. Once you are up and running you can make adjustments based on the actual load of your environment.

I plan to do some additional benchmarking soon, and will update the above table based on those results.

Setting up Elasticsearch

Previous versions of ElastiFlow™ required no special configuration for Elasticsearch. However changes made to Elasticsearch 7.x, require that the following settings be made in elasticsearch.yml:

indices.query.bool.max_clause_count: 8192
search.max_buckets: 100000

At high ingest rates (>10K flows/s), or for data redundancy and high availability, a multi-node cluster is recommended.

Setting up Logstash

IMPORTANT!!! If you are upgrading from version 2.x of ElastiFlow™ you MUST delete the old elastiflow index template from Elasticsearch PRIOR to starting Logstash with the v3.0.0 pipeline. This can be done by executing DELETE _template/elastiflow from Dev Tools --> Console in Kibana. Use GET _template to confirm that it was deleted.

The ElastiFlow™ Logstash pipeline is the heart of the solution. It is here that the raw flow data is collected, decoded, parsed, formatted and enriched. It is this processing that makes possible the analytics options provided by the Kibana dashboards.

Follow these steps to ensure that Logstash and ElastiFlow™ are optimally configured to meet your needs.

1. Set JVM heap size.

To increase performance, ElastiFlow™ takes advantage of the caching and queueing features available in many of the Logstash plugins. These features increase the consumption of the JVM heap. The JVM heap space used by Logstash is configured in jvm.options. It is recommended that Logstash be given at least 2GB of JVM heap. If all options, incl. DNS lookups (requires version 3.0.10 or later of the DNS filter), are enabled increase this to 4GB. This is configured in jvm.options as follows:

-Xms4g
-Xmx4g

2. Add and Update Required Logstash plugins

To use ElastiFlow™ you will need to install the community supported sFlow codec for Logstash. It is also recommended that you always use the latest version of the Netflow codec, the UDP input, and the DNS filter. This can achieved by running the following commands:

LS_HOME/bin/logstash-plugin install logstash-codec-sflow
LS_HOME/bin/logstash-plugin update logstash-codec-netflow
LS_HOME/bin/logstash-plugin update logstash-input-udp
LS_HOME/bin/logstash-plugin update logstash-input-tcp
LS_HOME/bin/logstash-plugin update logstash-filter-dns
LS_HOME/bin/logstash-plugin update logstash-filter-geoip
LS_HOME/bin/logstash-plugin update logstash-filter-translate

3. Copy the pipeline files to the Logstash configuration path.

There are five sets of configuration files provided within the logstash/elastiflow folder:

logstash
  `- elastiflow
       |- conf.d  (contains the logstash pipeline)
       |- definitions  (custom Netflow and IPFIX field definitions)
       |- dictionaries (yaml files used to enrich raw flow data)
       |- geoipdbs  (contains GeoIP databases)
       `- templates  (contains index templates)

Copy the elastiflow directory to the location of your Logstash configuration files (e.g. on RedHat/CentOS or Ubuntu this would be /etc/logstash/elastiflow ). If you place the ElastiFlow™ pipeline within a different path, you will need to modify the following environment variables to specify the correct location:

Environment Variable	Description	Default Value
ELASTIFLOW_DICT_PATH	The path where dictionary files are located	/etc/logstash/elastiflow/dictionaries
ELASTIFLOW_TEMPLATE_PATH	The path to where index templates are located	/etc/logstash/elastiflow/templates
ELASTIFLOW_GEOIP_DB_PATH	The path where GeoIP DBs are located	/etc/logstash/elastiflow/geoipdbs

4. Setup environment variable helper files

Rather than directly editing the pipeline configuration files for your environment, environment variables are used to provide a single location for most configuration options. These environment variables will be referred to in the remaining instructions. A reference of all environment variables can be found here.

Depending on your environment there may be many ways to define environment variables. The files profile.d/elastiflow.sh and logstash.service.d/elastiflow.conf are provided to help you with this setup.

Recent versions of both RedHat/CentOS and Ubuntu use systemd to start background processes. When deploying ElastiFlow™ on a host where Logstash will be managed by systemd, copy logstash.service.d/elastiflow.conf to /etc/systemd/system/logstash.service.d/elastiflow.conf. Any configuration changes can then be made by editing this file.

Remember that for your changes to take effect, you must issue the command sudo systemctl daemon-reload.

5. Add the ElastiFlow™ pipeline to pipelines.yml

Logstash 6.0 introduced the ability to run multiple pipelines from a single Logstash instance. The pipelines.yml file is where these pipelines are configured. While a single pipeline can be specified directly in logstash.yml, it is a good practice to use pipelines.yml for consistency across environments.

Edit pipelines.yml (usually located at /etc/logstash/pipelines.yml) and add the ElastiFlow™ pipeline (adjust the path as necessary).

- pipeline.id: elastiflow
  path.config: "/etc/logstash/elastiflow/conf.d/*.conf"

6. Configure inputs

By default flow data will be recieved on all IPv4 addresses of the Logstash host using the standard ports for each flow type. You can change both the IPs and ports used by modifying the following environment variables:

Environment Variable	Description	Default Value
ELASTIFLOW_NETFLOW_IPV4_HOST	The IP address from which to listen for Netflow messages	0.0.0.0
ELASTIFLOW_NETFLOW_IPV4_PORT	The UDP port on which to listen for Netflow messages	2055
ELASTIFLOW_SFLOW_IPV4_HOST	The IP address from which to listen for sFlow messages	0.0.0.0
ELASTIFLOW_SFLOW_IPV4_PORT	The UDP port on which to listen for sFlow messages	6343
ELASTIFLOW_IPFIX_TCP_IPV4_HOST	The IP address from which to listen for IPFIX messages via TCP	0.0.0.0
ELASTIFLOW_IPFIX_TCP_IPV4_PORT	The port on which to listen for IPFIX messages via TCP	4739
ELASTIFLOW_IPFIX_UDP_IPV4_HOST	The IP address from which to listen for IPFIX messages via UDP	0.0.0.0
ELASTIFLOW_IPFIX_UDP_IPV4_PORT	The port on which to listen for IPFIX messages via UDP	4739

Collection of flows over IPv6 is disabled by default to avoid issues on systems without IPv6 enabled. To enable IPv6 rename the following files in the elastiflow/conf.d directory, removing .disabled from the end of the name: 10_input_ipfix_ipv6.logstash.conf.disabled, 10_input_netflow_ipv6.logstash.conf.disabled, 10_input_sflow_ipv6.logstash.conf.disabled. Similiar to IPv4, the IPv6 input can be configured using environment variables:

Environment Variable	Description	Default Value
ELASTIFLOW_NETFLOW_IPV6_HOST	The IP address from which to listen for Netflow messages	[::]
ELASTIFLOW_NETFLOW_IPV6_PORT	The UDP port on which to listen for Netflow messages	52055
ELASTIFLOW_SFLOW_IPV6_HOST	The IP address from which to listen for sFlow messages	[::]
ELASTIFLOW_SFLOW_IPV6_PORT	The UDP port on which to listen for sFlow messages	56343
ELASTIFLOW_IPFIX_TCP_IPV6_HOST	The IP address from which to listen for IPFIX messages via TCP	[::]
ELASTIFLOW_IPFIX_TCP_IPV6_PORT	The port on which to listen for IPFIX messages via TCP	54739
ELASTIFLOW_IPFIX_UDP_IPV6_HOST	The IP address from which to listen for IPFIX messages via UDP	[::]
ELASTIFLOW_IPFIX_UDP_IPV6_PORT	The port on which to listen for IPFIX messages via UDP	54739

To improve UDP input performance for high volume flow collection, the default values for UDP input workers and queue_size are increased. The default values are 2 and 2000 respecitvely. ElastiFlow™ increases these to 4 and 4096. Further tuning is possible using the following environment variables.

Environment Variable	Description	Default Value
ELASTIFLOW_NETFLOW_UDP_WORKERS	The number of Netflow input threads	4
ELASTIFLOW_NETFLOW_UDP_QUEUE_SIZE	The number of unprocessed Netflow UDP packets the input can buffer	4096
ELASTIFLOW_NETFLOW_UDP_RCV_BUFF	The socket receive buffer size (bytes) for Netflow	33554432
ELASTIFLOW_SFLOW_UDP_WORKERS	The number of sFlow input threads	4
ELASTIFLOW_SFLOW_UDP_QUEUE_SIZE	The number of unprocessed sFlow UDP packets the input can buffer	4096
ELASTIFLOW_SFLOW_UDP_RCV_BUFF	The socket receive buffer size (bytes) for sFlow	33554432
ELASTIFLOW_IPFIX_UDP_WORKERS	The number of IPFIX input threads	4
ELASTIFLOW_IPFIX_UDP_QUEUE_SIZE	The number of unprocessed IPFIX UDP packets the input can buffer	4096
ELASTIFLOW_IPFIX_UDP_RCV_BUFF	The socket receive buffer size (bytes) for IPFIX	33554432

WARNING! Increasing queue_size will increase heap_usage. Make sure have configured JVM heap appropriately as specified in the Requirements

7. Configure the Elasticsearch output

Obviously the data needs to land in Elasticsearch, so you need to tell Logstash where to send it.

The default is to send data to only a single Elasticsearch node. This node is specified using the following environment variable:

Environment Variable	Description	Default Value
ELASTIFLOW_ES_HOST	The Elasticsearch host to which the output will send data	127.0.0.1:9200

Optionally Logstash can be configured to use an array of three Elasticsearch nodes. This is done by completing the following steps:

Rename 30_output_10_single.logstash.conf to 30_output_10_single.logstash.conf.disabled
Rename 30_output_20_multi.logstash.conf.disabled to 30_output_20_multi.logstash.conf
Set the following environment variables:

Environment Variable	Description	Default Value
ELASTIFLOW_ES_HOST_1	The first Elasticsearch host to which the output will send data	127.0.0.1:9200
ELASTIFLOW_ES_HOST_2	The second Elasticsearch host to which the output will send data	127.0.0.2:9200
ELASTIFLOW_ES_HOST_3	The third Elasticsearch host to which the output will send data	127.0.0.3:9200

To complete the setup of the Elasticsearch output, configure the following environment variables as required for your environment:

Environment Variable	Description	Default Value
ELASTIFLOW_ES_USER	The username for the connection to Elasticsearch	elastic
ELASTIFLOW_ES_PASSWD	The password for the connection to Elasticsearch	changeme
ELASTIFLOW_ES_SSL_ENABLE	Enable or disable SSL connection to Elasticsearch	false
ELASTIFLOW_ES_SSL_VERIFY	Enable or disable verification of the SSL certificate. If enabled, the output must be edited to set the path to the certificate.	false

If you are only using the open-source version of Elasticsearch, it will ignore the username and password. In that case just leave the defaults.

If ELASTIFLOW_ES_SSL_ENABLE and ELASTIFLOW_ES_SSL_VERIFY are both true, you must uncomment the cacert option in the Elasticsearch output and set the path to the certificate.

8. Enable DNS name resolution (optional)

In the past it was recommended to avoid DNS queries as the latency costs of such lookups had a devastating effect on throughput. While the Logstash DNS filter provides a caching mechanism, its use was not recommended. When the cache was enabled all lookups were performed synchronously. If a name server failed to respond, all other queries were stuck waiting until the query timed out. The end result was even worse performance.

Fortunately these problems have been resolved. Release 3.0.8 of the DNS filter introduced an enhancement which caches timeouts as failures, in addition to normal NXDOMAIN responses. This was an important step as many domain owner intentionally setup their nameservers to ignore the reverse lookups needed to enrich flow data. In addition to this change, I submitted am enhancement which allows for concurrent queries when caching is enabled. The Logstash team approved this change, and it is included in 3.0.10 of the plugin.

With these changes I can finally give the green light for using DNS lookups to enrich the incoming flow data. You will see a little slow down in throughput until the cache warms up, but that usually lasts only a few minutes. Once the cache is warmed up, the overhead is minimal, and event rates averaging 10K/s and as high as 40K/s were observed in testing.

The key to good performance is setting up the cache appropriately. Most likely it will be DNS timeouts that are the source of most latency. So ensuring that a higher volume of such misses can be cached for longer periods of time is most important.

The DNS lookup features of ElastiFlow™ can be configured using the following environment variables:

Environment Variable	Description	Default Value
ELASTIFLOW_RESOLVE_IP2HOST	Enable/Disable DNS requests. Possible values are `exporters` (only flow exporter IPs are resolved), `endpoints` (only endpoint IPs, src/dst, are resolved), `true` (both are resolved) or `false`	false
ELASTIFLOW_NAMESERVER	The DNS server to which the dns filter should send requests	127.0.0.1
ELASTIFLOW_DNS_HIT_CACHE_SIZE	The cache size for successful DNS queries	25000
ELASTIFLOW_DNS_HIT_CACHE_TTL	The time in seconds successful DNS queries are cached	900
ELASTIFLOW_DNS_FAILED_CACHE_SIZE	The cache size for failed DNS queries	75000
ELASTIFLOW_DNS_FAILED_CACHE_TTL	The time in seconds failed DNS queries are cached	3600

9. Configure Application ID enrichment (optional)

Both Netflow and IPFIX allow devices with application identification features to specify the application associated with the traffic in the flow. For Netflow this is the application_id field. The IPFIX field is applicationId.

The application names which correspond to values of these IDs is vendor-specific. In order for ElastiFlow™ to accurately translate the ID values, it must be told the type of device that is exporting the flows. To do so you must edit elastiflow/dictionaries/app_id_srctype.yml and specify the source type of your supported device. For example...

"192.0.2.1": "cisco_nbar2"
"192.0.2.2": "fortinet"

Currently supported is Cisco's NBAR2 and Fortinet's FortiOS. If you have a device that you would like added, I will need a mapping of Application IDs to names. This can often be extracted from the device's configuration. I would love to be able to build up a large knowledge base of such mappings.

You can also define a default source type value by setting the following environment variable:

Environment Variable	Description	Default Value
ELASTIFLOW_DEFAULT_APPID_SRCTYPE	Sets the default source type for translating the App IDs to names. Valid values are `cisco_nbar2` and `fortinet`	__UNKNOWN

Application identity is also supported from the following sources, and requires no additional configuration:

Citrix Netscaler
IXIA IxFlow
ntop nProbe (An nProbe configuration file that works well with ElastiFlow™ is available HERE)
Palo Alto
SonicWall
Sophos

Once configured ElastiFlow™ will resolve the ID to an application name, which will be available in the dashboards.

10. Manually set the sampling interval for devices that don't send it. (optional)

Some devices which collect sampled flows do not include the sampling interval in the flow records that they send (e.g. some Cisco IOS XR and Huawei devices). In such situations the sampling interval can be set manually by adding the IP address and sampling rate for the device in elastiflow/dictionaries/sampling_interval.yml.

11. Start Logstash

You should now be able to start Logstash and begin collecting network flow data. Assuming you are running a recent version of RedHat/CentOS or Ubuntu, and using systemd, complete these steps:

Run systemctl daemon-reload to ensure any changes to the environment variables are recognized.
Run systemctl start logstash

NOTICE! Make sure that you have already setup the Logstash init files by running LS_HOME/bin/system-install. If the init files have not been setup you will receive an error.

To follow along as Logstash starts you can tail its log by running:

tail -f /var/log/logstash/logstash-plain.log

Logstash takes a little time to start... BE PATIENT!

If using Netflow v9 or IPFIX you will likely see warning messages related to the flow templates not yet being received. They will disappear after templates are received from the network devices, which should happen every few minutes. Some devices can take a bit longer to send templates. Fortinet in particular send templates rather infrequently.

Logstash setup is now complete. If you are receiving flow data, you should have an elastiflow- daily index in Elasticsearch.

Setting up Kibana

Kibana 6.5 introduced the ability to export and import Index Patterns through the UI. This greatly simplifies the setup of Kibana.

Kibana 6.5.x and Later

The Index Patterns, vizualizations and dashboards can be loaded into Kibana by importing the elastiflow.kibana.<VER>.json file from within the Kibana UI. This is done from the Management -> Saved Objects page.

Kibana 6.4.x and Earlier

An API (yet undocumented) is available to import and export Index Patterns. The JSON file which contains the Index Pattern configuration is kibana/elastiflow.index_pattern.json. To setup the elastiflow-* Index Pattern run the following command:

curl -X POST -u USERNAME:PASSWORD http://KIBANASERVER:5601/api/saved_objects/index-pattern/elastiflow-* -H "Content-Type: application/json" -H "kbn-xsrf: true" -d @/PATH/TO/elastiflow.index_pattern.json

Finally the vizualizations and dashboards can be loaded into Kibana by importing the elastiflow.dashboards.<VER>.json file from within the Kibana UI. This is done from the Management -> Saved Objects page. There are separate dashboard import files for version 6.2.x, 6.3.x and 6.4.x of Kibana. Select the file that corresponds to your version of Kibana.

Recommended Kibana Advanced Settings

You may find that modifying a few of the Kibana advanced settings will produce a more user-friendly experience while using ElastiFlow™. These settings are made in Kibana, under Management -> Advanced Settings.

Advanced Setting	Value	Why make the change?
doc_table:highlight	false	There is a pretty big query performance penalty that comes with using the highlighting feature. As it isn't very useful for this use-case, it is better to just trun it off.
filters:pinnedByDefault	true	Pinning a filter will it allow it to persist when you are changing dashbaords. This is very useful when drill-down into something of interest and you want to change dashboards for a different perspective of the same data. This is the first setting I change whenever I am working with Kibana.
state:storeInSessionStorage	true	Kibana URLs can get pretty large. Especially when working with Vega visualizations. This will likely result in error messages for users of Internet Explorer. Using in-session storage will fix this issue for these users.
timepicker:quickRanges	see below	The default options in the Time Picker are less than optimal, for most logging and monitoring use-cases. Fortunately Kibana now allows you to customize the time picker. Our recommended settings can be found see below.

Environment Variable Reference

The supported environment variables are:

Environment Variable	Description	Default Value
ELASTIFLOW_DICT_PATH	The path where dictionary files are located	/etc/logstash/elastiflow/dictionaries
ELASTIFLOW_DEFINITION_PATH	The path where custom field definitions are located	/etc/logstash/elastiflow/definitions
ELASTIFLOW_TEMPLATE_PATH	The path to where index templates are located	/etc/logstash/elastiflow/templates
ELASTIFLOW_GEOIP_DB_PATH	The path where GeoIP DBs are located	/etc/logstash/elastiflow/geoipdbs
ELASTIFLOW_GEOIP_CACHE_SIZE	The size of the GeoIP query cache	8192
ELASTIFLOW_GEOIP_LOOKUP	Enable/Disable GeoIP lookups	true
ELASTIFLOW_ASN_LOOKUP	Enable/Disable ASN lookups	true
ELASTIFLOW_KEEP_ORIG_DATA	If set to `false` the original `netflow`, `ipfix` and `sflow` objects will be deleted prior to indexing. This can save disk space without affecting the provided dashboards. However the original flow fields will no longer be available if they are desired for additional analytics.	true
ELASTIFLOW_DEFAULT_APPID_SRCTYPE	Sets the default source type for translating the App IDs to names. Valid values are `cisco_nbar2` and `fortinet`	__UNKNOWN
ELASTIFLOW_RESOLVE_IP2HOST	Enable/Disable DNS requests. Possible values are `exporters` (only flow exporter IPs are resolved), `endpoints` (only endpoint IPs, src/dst, are resolved), `true` (both are resolved) or `false`	false
ELASTIFLOW_NAMESERVER	The DNS server to which the dns filter should send requests	127.0.0.1
ELASTIFLOW_DNS_HIT_CACHE_SIZE	The cache size for successful DNS queries	25000
ELASTIFLOW_DNS_HIT_CACHE_TTL	The time in seconds successful DNS queries are cached	900
ELASTIFLOW_DNS_FAILED_CACHE_SIZE	The cache size for failed DNS queries	75000
ELASTIFLOW_DNS_FAILED_CACHE_TTL	The time in seconds failed DNS queries are cached	3600
ELASTIFLOW_ES_HOST	The Elasticsearch host to which the output will send data	127.0.0.1:9200
ELASTIFLOW_ES_HOST_1	The first Elasticsearch host to which the output will send data	127.0.0.1:9200
ELASTIFLOW_ES_HOST_2	The second Elasticsearch host to which the output will send data	127.0.0.2:9200
ELASTIFLOW_ES_HOST_3	The third Elasticsearch host to which the output will send data	127.0.0.3:9200
ELASTIFLOW_ES_SSL_ENABLE	Enable or disable SSL connection to Elasticsearch	false
ELASTIFLOW_ES_SSL_VERIFY	Enable or disable verification of the SSL certificate. If enabled, the output must be edited to set the path to the certificate.	false
ELASTIFLOW_ES_USER	The password for the connection to Elasticsearch	elastic
ELASTIFLOW_ES_PASSWD	The username for the connection to Elasticsearch	changeme
ELASTIFLOW_NETFLOW_IPV4_HOST	The IP address on which to listen for Netflow messages	0.0.0.0
ELASTIFLOW_NETFLOW_IPV4_PORT	The UDP port on which to listen for Netflow messages	2055
ELASTIFLOW_NETFLOW_IPV6_HOST	The IP address on which to listen for Netflow messages	[::]
ELASTIFLOW_NETFLOW_IPV6_PORT	The UDP port on which to listen for Netflow messages	52055
ELASTIFLOW_NETFLOW_UDP_WORKERS	The number of Netflow input threads	4
ELASTIFLOW_NETFLOW_UDP_QUEUE_SIZE	The number of unprocessed Netflow UDP packets the input can buffer	4096
ELASTIFLOW_NETFLOW_UDP_RCV_BUFF	The socket receive buffer size (bytes) for Netflow	33554432
ELASTIFLOW_NETFLOW_LASTSW_TIMESTAMP	Enable/Disable setting `@timestamp` with the value of netflow.last_switched	false
ELASTIFLOW_NETFLOW_TZ	The timezone of netflow.last_switched	UTC
ELASTIFLOW_SFLOW_IPV4_HOST	The IP address on which to listen for sFlow messages	0.0.0.0
ELASTIFLOW_SFLOW_IPV4_PORT	The UDP port on which to listen for sFlow messages	6343
ELASTIFLOW_SFLOW_IPV6_HOST	The IP address on which to listen for sFlow messages	[::]
ELASTIFLOW_SFLOW_IPV6_PORT	The UDP port on which to listen for sFlow messages	56343
ELASTIFLOW_SFLOW_UDP_WORKERS	The number of sFlow input threads	4
ELASTIFLOW_SFLOW_UDP_QUEUE_SIZE	The number of unprocessed sFlow UDP packets the input can buffer	4096
ELASTIFLOW_SFLOW_UDP_RCV_BUFF	The socket receive buffer size (bytes) for sFlow	33554432
ELASTIFLOW_IPFIX_TCP_IPV4_HOST	The IP address on which to listen for IPFIX messages via TCP	0.0.0.0
ELASTIFLOW_IPFIX_TCP_IPV4_PORT	The port on which to listen for IPFIX messages via TCP	4739
ELASTIFLOW_IPFIX_UDP_IPV4_HOST	The IP address on which to listen for IPFIX messages via UDP	0.0.0.0
ELASTIFLOW_IPFIX_UDP_IPV4_PORT	The port on which to listen for IPFIX messages via UDP	4739
ELASTIFLOW_IPFIX_TCP_IPV6_HOST	The IP address on which to listen for IPFIX messages via TCP	[::]
ELASTIFLOW_IPFIX_TCP_IPV6_PORT	The port on which to listen for IPFIX messages via TCP	54739
ELASTIFLOW_IPFIX_UDP_IPV6_HOST	The IP address on which to listen for IPFIX messages via UDP	[::]
ELASTIFLOW_IPFIX_UDP_IPV6_PORT	The port on which to listen for IPFIX messages via UDP	54739
ELASTIFLOW_IPFIX_UDP_WORKERS	The number of IPFIX input threads	4
ELASTIFLOW_IPFIX_UDP_QUEUE_SIZE	The number of unprocessed IPFIX UDP packets the input can buffer	4096
ELASTIFLOW_IPFIX_UDP_RCV_BUFF	The socket receive buffer size (bytes) for IPFIX	33554432

Recommended Setting for timepicker:quickRanges

I recommend configuring timepicker:quickRanges for the setting below. The result will look like this:

[
  {
    "from": "now-15m",
    "to": "now",
    "display": "Last 15 minutes"
  },
  {
    "from": "now-30m",
    "to": "now",
    "display": "Last 30 minutes"
  },
  {
    "from": "now-1h",
    "to": "now",
    "display": "Last 1 hour"
  },
  {
    "from": "now-2h",
    "to": "now",
    "display": "Last 2 hours"
  },
  {
    "from": "now-4h",
    "to": "now",
    "display": "Last 4 hours"
  },
  {
    "from": "now-12h",
    "to": "now",
    "display": "Last 12 hours"
  },
  {
    "from": "now-24h",
    "to": "now",
    "display": "Last 24 hours"
  },
  {
    "from": "now-48h",
    "to": "now",
    "display": "Last 48 hours"
  },
  {
    "from": "now-7d",
    "to": "now",
    "display": "Last 7 days"
  },
  {
    "from": "now-30d",
    "to": "now",
    "display": "Last 30 days"
  },
  {
    "from": "now-60d",
    "to": "now",
    "display": "Last 60 days"
  },
  {
    "from": "now-90d",
    "to": "now",
    "display": "Last 90 days"
  },
  {
    "from": "now/d",
    "to": "now/d",
    "display": "Today"
  },
  {
    "from": "now/w",
    "to": "now/w",
    "display": "This week"
  },
  {
    "from": "now/M",
    "to": "now/M",
    "display": "This month"
  },
  {
    "from": "now/d",
    "to": "now",
    "display": "Today so far"
  },
  {
    "from": "now/w",
    "to": "now",
    "display": "Week to date"
  },
  {
    "from": "now/M",
    "to": "now",
    "display": "Month to date"
  }
]

Attribution

This product includes GeoLite2 data created by MaxMind, available from (http://www.maxmind.com)

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

INSTALL.md

INSTALL.md

ElastiFlow™ Installation

Requirements

Setting up Elasticsearch

Setting up Logstash

1. Set JVM heap size.

2. Add and Update Required Logstash plugins

3. Copy the pipeline files to the Logstash configuration path.

4. Setup environment variable helper files

5. Add the ElastiFlow™ pipeline to pipelines.yml

6. Configure inputs

7. Configure the Elasticsearch output

8. Enable DNS name resolution (optional)

9. Configure Application ID enrichment (optional)

10. Manually set the sampling interval for devices that don't send it. (optional)

11. Start Logstash

Setting up Kibana

Kibana 6.5.x and Later

Kibana 6.4.x and Earlier

Recommended Kibana Advanced Settings

Environment Variable Reference

Recommended Setting for timepicker:quickRanges

Attribution

Files

INSTALL.md

Latest commit

History

INSTALL.md

File metadata and controls

ElastiFlow™ Installation

Requirements

Setting up Elasticsearch

Setting up Logstash

1. Set JVM heap size.

2. Add and Update Required Logstash plugins

3. Copy the pipeline files to the Logstash configuration path.

4. Setup environment variable helper files

5. Add the ElastiFlow™ pipeline to pipelines.yml

6. Configure inputs

7. Configure the Elasticsearch output

8. Enable DNS name resolution (optional)

9. Configure Application ID enrichment (optional)

10. Manually set the sampling interval for devices that don't send it. (optional)

11. Start Logstash

Setting up Kibana

Kibana 6.5.x and Later

Kibana 6.4.x and Earlier

Recommended Kibana Advanced Settings

Environment Variable Reference

Recommended Setting for timepicker:quickRanges

Attribution